Manuel d'utilisation / d'entretien du produit AV-16N214 du fabricant JVC
Aller à la page of 40
INSTRUCTIONS GGT0051-001D-E Contents Knowing your TV’ s features ....................................................... 3 Remote control buttons and basic functions .............................. 4 TV buttons and functions .........................
GGT0052-001B-E COLOUR TELEVISION AV -21Y214 AV -16N214 AV -17V214 Contents Knowing y our TV’ s f eatures ........................... 2 Remote control buttons and basic functions . 3 TV buttons and functions .............................. 5 Setting up your TV .
2 Safety Instructions W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY , OBSER VE THE FOLLOWING RULES REGARDING THE USE OF THIS TV . 1 Operate only fr om the pow er source indicated on the r ear of the TV .
3 Remote control buttons and basic functions No. Press T o 1 POWER T urn on or off the TV from standby mode. 2 MENU/OK Display menu and confirm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL M Select the desired channel number .
4 Remote control buttons and basic functions How to operate menus and menu locations TO Operation Note Display the MENU. Press the MENU/OK button 2 .T o exit the MENU, press the DISPLA Y/BACK button* 8 or choose EXIT menu. Display the top menu. Press 5 / ∞ buttons 3 to choose a menu title.
5 TV buttons and functions The following illustr ations are for A V -2 1Y2 14 and A V -16N2 14, which are used for e xplanation purpose . Y our TV may not look exactly lik e the illustrated. Front of the TV AV - 2 1Y2 14 AV -16N2 14 Rear of the TV AV -2 1Y2 14 A V -16N2 14 No.
6 Setting up your TV CA UTION • T urn off the equipment including the TV before connecting. 1 Connecting the aerial To install rod aerial Install into the top-rear aerial holder . Once installed, it cannot be remo ved. If you connect a VCR, connect the aerial output jack of y our VCR and the aerial jack on the TV with the aerial cable .
7 Setting up your TV (continued) 5 Making the initial settings Set up your TV b y pressing MENU/OK button or waiting for 15 seconds , then operate the TV b y following the steps as belo w: 7 • Press the red button to cancel the SETUP T OUR REST AR T function.
8 Basic setting for picture COLOUR SYSTEM Y ou can select the appropriate colour sy stem when the picture is not clear or no colour appears . Press the COLOUR S YSTEM button to select a setting.
9 Advance setting for pictur e BLUE BACK Y ou can set the TV to automatically change to a blue screen and mute the sound if the signal is w eak or absent, or when ther e is no input from an antenna. Select the BLUE B A CK in the INST ALL menu, then choose ON or OFF .
10 Fav orite channel and video setting To register the favorite channel Y ou can register and recall 4 fa vorite channels b y using the colour buttons (red, gr een, yello w , blue). 1 In TV mode, select a TV channel (PR 01-99) you desired to register .
11 Customized setting VNR Y ou can reduce the noise . Select the VNR in the PICTURE FEA TURES menu under PICTURE menu, then choose a setting of VNR function. ❇ VNR MENU PICTURE PICTURE FEATURES OFF VNR is turned off. AUTO Effect of VNR is automatically controlled.
12 TV channel presetting To register the TV channels auto- matically Y ou can register the TV channels into the TV’s channel list automatically . 1 Display the INST ALL menu.
13 TV channel presetting To add in the new channel (INSERT in the EDIT menu) Y ou can add in the new channel in the TV channel list as you lik e. Y ou need to find the “CH/CC” number for the TV channel.
14 Additional pr epar ation The illustrations sho wn in this section are for A V -16N2 14 only , which ar e used for explanation purpose . Y our TV may not look ex actly the same as illustrated. Before connecting • R ead the manuals provided with the de vices for the proper connection.
15 Specifications MODEL A V -21Y214 A V -16N214 A V-17V214 TV RF systems B/G, I, D/K, M Colour systems RF MODE P AL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz VIDEO MODE PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Channel and frequencies VHF low channel (VL) = 46.
1104-NIC-JMT © 2004 Victor Company of Japan, Limited GGT0052-001B-H_E_Cover 6/11/04, 6:21 PM 20.
2 15 cm 10 cm 10 cm 15 cm W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE T O RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV . 1 Operate only from the power source indicated on the rear of the TV .
3 Knowing your TV’ s features 2 1 3 4 Confirm your TV’ s functions Some functions written in this instruction manual may not be available for your TV . Please see the chart below and check the functions that are equipped for your TV ’ s model number .
4 Remote control buttons and basic functions No. Press T o POWER T urn on or off the TV from standby mode. MENU/OK Display menu and confirm selected function. 5 / ∞ / 2 / 3 Select and adjust menu function. CHANNEL -/+ Select the desired channel number .
5 Remote control buttons and basic functions (continued) The following chart shows locations of functions in menus. In this manual, location of a function is described as follows: Note: Some functions have the 4th menus as the sub-menus.
6 TV buttons and functions The illustrations shown below is for A V -29V334 and A V-21C314 series only , which are used for explanation purpose. Y our TV may not look exactly the same as illustrated.
7 1 Connecting the aerial cable. If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV with the aerial cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of the TV with the video cable (or S-VIDEO cable if available) and audio cables.
8 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then the TV will operate by following setps as below: • Press 5 / ∞ button to select your desired language, then press MENU/OK button. • TV will start searching for the channels.
9 COLOUR SYSTEM Y ou can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. T o operate this function with a menu: For the colour system in each country or region, see the table below: PICTURE MODE Y ou can choose the desired picture setting with one-touch.
10 Adjusting the picture – USER Y ou can adjust the desired picture setting when selecting USER in PICTURE MODE. 1 Select the USER in PICTURE MODE under PICTURE menu.
11 AI ECO SENSOR (ECO) Y ou can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. 1 Mild contrast (recommended). 2 Even contrast. OFF Cancel the function. T o operate this function with a menu: Y ou can display the graphic of AI ECO SENSOR on the screen.
12 SOUND SYSTEM Y ou can select an appropriate sound system when abnormal sound occurs even when the picture appears normally . Press the SOUND SYSTEM button to select a setting.
13 CINEMA SURROUND Y ou can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting. OFF Cancel the function. LOW Listen to sound with less wider audience effect. HIGH Listen to sound with more wider audience effect.
14 T o register the favorite channel Y ou can register and recall 4 favorite channels by using the colour buttons (red, green, yellow , blue). 1 In TV mode, select a TV channel (PR01-99) you desired to register . 2 Press and hold a colour button for 3 seconds or more.
15 VNR Y ou can reduce the noise. Select the VNR in the PICTURE FEA TURES menu under PICTURE menu, then choose a setting of VNR function. OFF VNR is turned of f. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level.
16 MENU INST ALL menu VIDEO-2 SETTING ❇ AUTO SHUTOFF Y ou can set the TV to turn off automatically when no signal is received for about 15 minutes or longer after the end of a broadcast. Select AUTO SHUT OFF in INST ALL menu, then choose ON or OFF .
17 T o register the TV channels automatically Y ou can register the TV channels into the TV ’ s channel list automatically . 1 Display the INST ALL menu. 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered in the channel list (PR list) automatically .
18 T o add in the new channel (INSERT in the EDIT menu) Y ou can add in the new channel in the TV channel list as you like. Y ou need to find the “ CH/CC ” number for the TV channel. Find the “ CH/CC ” number corresponding to the channel number of the TV channel from the attached sheet “ CH/CC number list ” on page 19.
19 TV channel presetting (continued) CH/CC number When you want to use the INSERT function on page 18, find the CH/CC number corresponding to the channel number of the TV channel from this table. Channel No. Country US United States, Philippines, etc.
20 V L R V L R / MONO OUTPUT VIDEO-1 INPUT V L R R L / MONO Y C B C R / V V S OVER L R / MONO OUTPUT VIDEO-1 INPUT COMPONENT (VIDEO-2) INPUT BASS SPEAKER OUT . The illustrations shown in this section are for A V -29V334 and A V - 21C314 only , which are used for explanation purpose.
21 VIDEO -1 INPUT OUTPUT COMPONENT ( VIDEO-2 ) INPUT BASS SPEAKER OUT R C R V MONO L / V Y / V L MONO L / C B S OVER R R T win Port Bass Blaster Unit Additional preparation (continued) Attaching the T.
22 T roubleshooting If a problem occurs when you are using the TV , check the below troubleshooting guide before calling for repair . • Deactivate the BLUE BACK function if it is turned on. • Choose the appropriate sound system. Refer to “SOUND SYSTEM” on page 12.
23 Design and specifications subject to change without notice. Specifications Model A V -29V334 A V-29J334 A V -29V314 A V -25V334 A V -25V314 TV RF system B/G, I, D/K, M Colour system P AL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Channel and Frequencies VHF low channel (VL) : 46.
1 104-FLE-JMT © 2004 Victor Company of Japan, Limited Specifications (continued) Design and specifications subject to change without notice. Model A V -21V334 A V -21V314 A V -21C314 A V -21W314 A V -21L314 A V -17V314 TV RF system B/G, I, D/K, M Colour system P AL, SECAM, NTSC 3.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC AV-16N214 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC AV-16N214 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC AV-16N214, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC AV-16N214 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC AV-16N214, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC AV-16N214.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC AV-16N214. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC AV-16N214 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
