Manuel d'utilisation / d'entretien du produit F707 du fabricant Jura Capresso
Aller à la page of 29
IMPRESSA F70/F707 Instructions for use 9/06 Art. Nr. 66380.
Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. = Note = Important = Tip JURA Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 6 Fig. 7 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 16 Fig. 5 Fig. 8 Fig. 15 Fig. 17 Fig. 18.
Temp. max. Fig. 19 Fig. 21 Fig. 20 Temp. min..
Control elements 1. Rotary Switch 2. Illuminated ring 3. ON / OFF symbol 4. 1 LARGE CUP symbol 5. 1 COFFEE symbol 6. 1 ESPRESSO symbol 7. MAINTENANCE symbol 8. START symbol 9. Display dialog system 10. Water tank with handle 11. Filler funnel for pre-ground coffee 12.
6 Contents 1. Safety information .......................................... page 7 1.1 Warning .............................................. page 7 1.2 Precautions .......................................... page 7 2. Preparing the IMPRESSA ..........
7 Introduction Thank you for purchasing the IMPRESSA. To ensure perfect func- tioning of your IMPRESSA, carefully read this operating manual and keep it for future reference.
8 Then fill the water tank and reinstall it. Make sure to install the tank properly, it must engage audibly. 2.4 Fill coffee beans To ensure that your machine will work perfectly for a long time a.
9 CLOSE TAP Close the steam / hot water draw-off tap (14). FILLING SYSTEM HEATING PRESS MAINT. Touch the symbol (7). Machine carries out a rinsing operation. RINSING READY If BEANS FILL is displayed, press the coffee draw-off key again.
10 5. Installation of CLARIS plus filter cartridges If the CLARIS plus filter cartridge is installed properly, de-scaling of the coffee machine is no longer required. For more information on the CLARIS plus filter cartridge refer to brochure «CLARIS plus.
11 Fill the water tank with cold, fresh tap water and reinstall it. Place a sufficiently large receptacle (at least 1/2 litre) under the Professional Cappuccino Frother (15) (Fig. 10). Turn the selector switch of the Professional Cappuccino Frother (15) to the steam position (Fig.
12 e.g. 120 ML COFFEE Your coffee is being prepared. READY 9. Making 2 cups of coffee You cannot choose the strength of the coffee when making 2 cups.
13 Your coffee is being prepared. READY 10. Drawing off pre-ground coffee Never use instant coffee or quick-coffee. We recommend that you always use powder from fresh coffee beans or, pre- ground, vacuum-packed coffee. Never fill in more than 2 portions of powder.
14 If the required water quantity is reached, the following message is displayed: CLOSE TAP Close the steam / hot water draw-off tap (14). READY Before CLOSE TAP water may still escape the system.
15 When using for the first time, remove the protective cover from the Professional Cappuccino Frother (15) (Fig. 6). The protective cover is used only during transport as protection to prevent the ingress of contaminated materials. Remove the milk pipe from the Welcome Pack and connect it to the Professional Cappuccino Frother (15).
16 13.3 Rinsing the Professional Cappuccino Frother Carefully pull off the Professional Cappuccino Frother from your IMPRESSA. Dismantle the Professional Cappuccino Frother (15) into its indi- vidual parts (Fig. 16). Thoroughly rinse all parts of the nozzle under running water.
17 15. Programming When your IMPRESSA leaves the factory it is adjusted such that you can draw off coffee without having to change any settings. However, you can programme various parameters individually.
18 Press the Rotary Switch (1). INTENSIVE Turn the Rotary Switch (1) until the following message is dis- played: STANDARD Press the Rotary Switch (1) to save the setting. AROMA Turn the Rotary Switch (1) until EXIT appears Press the Rotary Switch (1) to leave the programming mode.
19 15.7 Programming the automatic switch-on time You must programme the time (Chapter 15.6) if you want to use the automatic switch-on function (––:–– = inactive). READY Press the Rotary Switch (1) until FILTER – / appears The illuminated ring (2) is active.
20 READY Press the Rotary Switch (1) until FILTER – / appears The illuminated ring (2) is active. Turn the Rotary Switch (1) until CUPS MADE appears Press the Rotary Switch (1) 100 Press one of the draw-off keys / / to check the number of individual cups made.
21 Turn the Rotary Switch (1) until EXIT appears Press the Rotary Switch (1) to leave the programming mode. READY 15.12 Programming the display for ML/OZ READY Press the Rotary Switch (1) until FILTER – / appears The illuminated ring (2) is active.
22 The red water level indicator appears when the drip tray (20) is full. 16.3 Drip tray missing NO TRAY If this information is displayed, the drip tray (20) is not installed properly or was not installed at all. Insert the drip tray (20).
23 If the water tank shows signs of scaling, remove the scaling using a commercial de-scaling agent. Take out the water tank (Fig. 4). Remove the CLARIS plus filter cartridge, if installed, before de-scaling the water tank.
24 NO TRAY READY Wipe coffee powder tank with a dry cloth after the cleaning program has finished. The cleaning operation was completed successfully. 17.1 Cleaning without display request Press the Rotary Switch (1) until FILTER – / appears.
25 Place a receptacle under the hot water spout (Fig. 18). Open the steam / hot water draw-off valve (14) (Fig. 12). DE-SCALING CLOSE TAP Close the steam / hot water draw-off tap (14). DE-SCALING EMPTY TRAY Empty the tray (20).
26 20. Tips for perfect coffee Height-adjustable coffee spout (17) You can adjust the height of the coffee spout to the size of your cups (Fig. 3) Grinding degree Refer to Chapter 2.5 «Adjusting the grinding gear». Preheating cups You can preheat the cups using hot water or steam.
27 21. Messages Cause Remedy FILL WATER Water tank is empty. Refill water Float defective Rinse or de-scale water tank FILL BEANS Bean tank is empty. Refill beans Although you have refilled beans, the Draw off a cup of coffee. The message will message still appears.
28 22. Problems Problem Cause Remedy Very loud noise coming from the Foreign body in grinding gear Drawing off pre-ground coffee still possible grinding gear Have IMPRESSA checked by JURA Service Too .
29 23. Legal information These operating instructions contain all the information required for using, operating and maintaining the machine properly. Knowledge of and compliance with the specifications contained in these operating instructions is required for using the machine safely as well as for operational safety and safety during maintenance.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Jura Capresso F707 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Jura Capresso F707 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Jura Capresso F707, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Jura Capresso F707 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Jura Capresso F707, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Jura Capresso F707.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Jura Capresso F707. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Jura Capresso F707 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
