Manuel d'utilisation / d'entretien du produit Wrangler (2009) du fabricant Jeep
Aller à la page of 496
I n f o r m a t i o n P r o v i d e d b y :.
VEHICLES SOLD IN CANADA W ith respect to any V ehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor . DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents.
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................ 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............
I n f o r m a t i o n P r o v i d e d b y :.
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 Rollover W arning ....................... 5 䡵 How T o Use This Manual .................. 6 䡵 W arnings And Cautions ................... 8 䡵 V ehicle Identification Number .
INTRODUCTION Congratulations on selecting your new Chrysler LLC vehicle. Be assured that it repr esents precision workman- ship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This is a specialized utility vehicle designed for both on-road and of f-road use.
the instructions and recommendations in this manual will help assure safe and enjoyable operation of your vehicle. NOTE: After you read the manual, it should be stored in the vehicle for convenient referencing and remain with the vehicle when sold, so that the new owner will be aware of all safety warnings.
Do not attempt sharp turns, abrupt maneuvers, or other unsafe driving actions that can cause loss of vehicle control. Failure to operate this vehicle safely may result in an accident, rollover of the vehicle, and severe or fatal injury . Drive carefully .
1 INTRODUCTION 7 I n f o r m a t i o n P r o v i d e d b y :.
W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entir e manual, you may miss important information.
THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W or d About Y our Keys ................. 1 2 ▫ Ignition Key Removal .................. 1 2 ▫ Key-In-Ignition Reminder ............... 1 3 䡵 Steering Wheel Lock .................... 1 3 ▫ T o Manually Lock The Steering Wheel .
▫ Using The Panic Alarm ................. 2 1 ▫ T o T urn Off “Flash Lights W ith Lock” ....... 2 1 ▫ Programming Additional T ransmitters ...... 2 2 ▫ General Information ................... 2 2 ▫ T ransmitter Battery Replacement ......
▫ Rear Center Lap/Shoulder Belt Retractor Lockout (Four-Door Models Only) ......... 4 4 ▫ Adjustable Upper Shoulder Belt Anchorage .......................... 4 5 ▫ Seat Belt Pretensioners ................. 4 5 ▫ Enhanced Seat Belt Use Reminder System (BeltAlert 威 ) .
A WORD ABOUT YOUR KEYS The keys for your new vehicle are enclosed in a plastic bag with the key code number on it. If you received your keys without the bag, ask your authorized dealer to give you the number . The key code can also be obtained by your authorized dealer from your vehicle invoice.
Manual T ransmission — If Equipped 1. T urn the ignition switch to the ACC (ACCESSORY) position. 2. Push the ignition key inward. 3. T urn the ignition key to the LOCK position, and remove the key . W ARNING! Leaving unattended children in a vehicle is danger- ous for a number of reasons.
T o Manually Lock the Steering Wheel W ith the engine running, r otate the steering wheel one– half revolution from the straight ahead position, turn of f the engine, and r emove the key . Rotate the steering wheel slightly in both directions until the lock engages.
If the V ehicle Security Light turns on during normal vehicle operation (vehicle running for longer than 10 sec- onds), it indicates that ther e is a fault in the electr onics. Should this occur , have the vehicle serviced as soon as possible by an authorized dealer .
dealer or by following the customer key programming procedur e. This procedur e consists of programming a blank key to the vehicle electronics. A blank key is one that has never been programmed. NOTE: When having the Sentry Key 威 Immobilizer System serviced, bring all vehicle keys with you to an authorized dealer .
The new Sentry Key 威 is programmed. The Remote Keyless Entry (RKE) transmitter will also be pro- grammed during this procedure. Repeat this pr ocedure to program up to eight keys. If you do not have a programmed Sentry Key 威 , contact your authorized dealer for details.
differ ences in the horn. In case one should go off in the future, you will need to know which mode has been activated in order to deactivate it. Rearming The System If something triggers the alarm, a.
button on the RKE transmitter to disarm the V ehicle Security Alarm. Y ou may also accidentally disarm the V ehicle Security Alarm by unlocking the driver’s door with the key and then locking it. The door will be locked but the V ehicle Security Alarm will not arm.
T o Unlock the Doors and Swing Gate Press and release the RKE transmitter UNLOCK button once to unlock the driver’s door only , or twice to unlock all the doors and swing gate. When the RKE transmitter UNLOCK button is pressed, the Illuminated Entry will initiate and the parking lights will flash twice.
T o Lock the Doors and Swing Gate Press and release the LOCK button on the RKE transmit- ter to lock all doors. The turn signals will flash and the horn will chirp once to acknowledge the lock signal. If desired, the “Sound Horn On Lock” featur e can be turned on or off using the following steps: 1.
2. While the UNLOCK button is pressed, (after four seconds) press the RKE transmitter LOCK button. Re- lease both buttons. 3. T est the “Flash Lights W ith Lock” featur e outside of the vehicle, by pressing the RKE transmitter LOCK button with the ignition in the LOCK position, and the key removed.
If your RKE transmitter fails to operate fr om a normal distance, check for these two conditions: 1. W eak battery in the RKE transmitter . The expected life of battery is five years. 2. Closeness to a radio transmitter such as a radio station tower , airport transmitter , military base, and some mobile or CB radios.
NOTE: If the RKE transmitter is equipped with a screw , reinstall and tighten the scr ew until snug. REMOTE ST ARTING SYSTEM — IF EQUIPPED This system uses the Remote Keyless Entry (RKE) transmitter to start the engine conve- niently fr om outside the vehicle while still maintaining security .
T o Enter Remote Start Press and r elease the REMOTE ST AR T button on the RKE transmitter twice, within five sec- onds. The parking lights will flash and the horn will chirp twice (if programmed). Then, the engine will start and the vehicle will remain in the Remote Start mode for a 15-minute cycle.
T o Exit Remote Start Mode and Drive the V ehicle Before the end of the 15-minute cycle, press and release the UNLOCK button on the RKE transmitter to unlock the doors and disarm the V ehicle Security Alarm (if equipped). Then, prior to the end of the 15-minute cycle, insert the key into the ignition switch and turn the switch to the ON position.
Upper Half Door Window Installation — If Equipped 1. Grasp the half door window and line up pins into pockets in lower door . 2. Push down to ensure the half door window is fully seated. Front Door Removal 1. Remove the hinge pin screws from the upper and lower outside hinges (using a #T50 T orx 威 head driver).
NOTE: If the red latch on the connector is locked, push the red latch to the right until you can only see the latch on one end (right) of the connector . This will unlock the connector tab, allowing the tab to be pressed down and enabling the harness to be disconnected.
Rear Door Removal (Four-Door Models) 1. Remove the hinge pin screws from the upper and lower outside hinges (using a #T50 T orx 威 head driver). 2. Slide the front seat(s) fully forward. 3. Remove the trim access door fr om the bottom of B-pillar . 4.
NOTE: If the red latch on the connector is locked, push the red latch to the right until you can only see the latch on one end (right) of the connector . This will unlock the connector tab, allowing the tab to be pressed down and enabling the harness to be disconnected.
W ARNING! • For personal security reasons and safety in an accident, lock the vehicle doors when you drive, as well as when you park and leave the vehicle. • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons.
Power Door Locks — If Equipped The door lock switch is located on each front door panel. Press the switch downward to lock the doors, and upward to unlock the doors. W ARNING! • For personal security reasons and safety in an accident, lock the vehicle doors when you drive, as well as when you park and leave the vehicle.
2. The transmission was in gear and the vehicle speed returned to 0 mph (0 km/h). 3. The transmission shift lever is in NEUTRAL or P ARK. 4. The driver door is opened.
6. The doors wer e not previously locked using the power door lock switch or Remote Keyless Entry (RKE) transmitter . Automatic Door Locks Programming The “Automatic Door Locks” feature can be enabled or disabled as follows: 1. Close all doors and place the key in the ignition.
W indow Lockout Switch (Four-Door Models Only) The window lockout switch (located between the win- dow switches) allows you to disable the rear window switches that are located on the back of the center floor console. T o disable the window contr ols, press the win- dow lockout button downward.
Rear Power Windows (Four-Door Models Only) The rear passenger window switches are located on the back of the center floor console. Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter-type sound in the ears.
NOTE: Close the r ear flip-up window before attempting to close the swing gate (hard top models only). CAUTION! Do not press on rear wiper blade when closing the rear flip-up window , as damage to the blade will result. W ARNING! Driving with the flip-up window open can allow poisonous exhaust gases into your vehicle.
OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle ar e the restraint systems. These include the front and rear seat belts for the driver and all passengers, front airbags for both the driver and front passenger , and side airbags (if equipped) for both the driver and front passenger .
inside of the vehicle. Everyone in a motor vehicle should be belted at all times to reduce or pr event injuries. Lap/Shoulder Belts All seating positions in your vehicle have combination lap/shoulder belts. The belt webbing retractor is de- signed to lock during very sudden stops or collisions.
W ARNING! (Continued) • T wo people should never be belted into a single seat belt. People belted together can crash into one another in an accident, hurting one another badly . Never use a lap/shoulder belt or a lap belt for more than one person, no matter what their size.
W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is loose will not protect you as well.
W ARNING! (Continued) • A shoulder belt placed behind will not protect you from injury during a collision. Y ou are more likely to hit your head in a collision if you do not wear your shoulder belt. The lap and shoulder belt are meant to be used together .
W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt cannot do its job as well.
Rear Center Lap/Shoulder Belt Retractor Lockout (Four-Door Models Only) This featur e is designed to lock the retractor whenever the 60% rear seatback is not fully latched. This pr events someone from wearing the rear center lap/shoulder belt when the rear seatback is not fully latched.
Adjustable Upper Shoulder Belt Anchorage In the front seat positions, the shoulder belt anchorage can be adjusted upward or downward to position the belt away from your neck. Push in on the anchorage near your outside shoulder and slide it up or down to r each the position that serves you best.
occupant early in a collision. Pr etensioners work for all size occupants, including those in child restraints. NOTE: These devices are not a substitute for proper seat belt placement by the occupant. The seat belt must still be worn snugly and positioned properly .
3. W ithin 60 seconds of starting the vehicle, unbuckle and then re-buckle the driver’s seat belt at least three times within 10 seconds, ending with the seat belt buckled. 4. T urn the ignition key to the OFF position. A single chime will sound to signify that you have successfully completed the programming.
W ARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the seat belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and stow the seat belt extender when not needed.
The fr ont airbags have a multistage inflator design. This may allow the airbag to have different rates of inflation that are based on collision severity . If the vehicle is equipped with side airbags, they are located inside the driver and front passenger seats, and their covers are also labeled SRS.
W ARNING! (Continued) • If your vehicle is equipped with side airbags, do not attach cupholders or any other objects on or around the door . The inflating side airbag could drive the objects into occupants, causing serious injury . • Do not cover or place items on the airbag covers.
Infants in rear facing child restraints should NEVER ride in the front seat of a vehicle with a passenger airbag. An airbag deployment could cause severe injury or death to infants in that position.
W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly . In some collisions, the airbags won’t deploy at all. Always wear your seat belts even though you have airbags.
• Driver Seat T rack Position Sensors • Driver and Front Passenger Seat Belt Pr etensioner How the Airbag System W orks • The Occupant Restraint Control (ORC) Module de- termines if a fr ontal or side collision is severe enough to requir e the front and/or side airbags to inflate.
• The Driver and Passenger Airbag/Inflator Units are located in the center of the steering wheel and the right side of the instrument panel. When the ORC detects a collision requiring the airbags, it signals the inflator units. A lar ge quantity of non-toxic gas is generated to inflate the front airbags.
• The Knee Impact Bolsters help protect the knees of the driver and the fr ont passenger , and position every- one for the best interaction with the front airbag.
• It is not advisable to drive your vehicle after the airbags have deployed. If you ar e involved in another collision, the airbags will not be in place to pr otect you. W ARNING! Deployed airbags and seat belt pretensioners cannot protect you in another collision.
Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured if the airbag system is not there to protect you.
deceleration data during and/or after airbag deploy- ment. EDR data are ONL Y recorded if an airbag deploys, or nearly deploys, and are otherwise unavailable. NOTE: 1. A near-deployment event occurs when the airbag sensor detects severe vehicle deceleration usually indica- tive of a crash, but not severe enough to warrant airbag deployment.
1. Used for research purposes, such as to match data with a particular crash record in an aggregate database, provided confidentiality of personal data is thereafter preserved. 2. Used in defense of litigation involving a Chrysler LLC product. 3. Requested by police under a legal warrant.
Child Restraint Everyone in your vehicle needs to be buckled up at all times, including babies and children. Every state in the United States and all Canadian provinces require that small childr en ride in pr oper r estraint systems. This is the law , and you can be pr osecuted for ignoring it.
• The infant carrier is only used r earward-facing in the vehicle. It is recommended for children who weigh up to about 20 lbs (9 kg). “Convertible” child seats often have a higher weight limit .
Here are some tips for getting the most out of your child restraint: • Before buying any restraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. The manufacturer also recommends that you try a child restraint in the vehicle seats where you will use it before you buy it.
• Buckle the child into the restraint exactly as the manufacturer’s instr uctions tell you. • When your child restraint is not in use, secure it in the vehicle with the seat belt or r emove it from the vehicle. Do not leave it loose in the vehicle.
• The lap portion should be low on the hips and as snug as possible. • Check belt fit periodically . A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle.
NOTE: If your child restraint seat is not LA TCH- compatible, install the restraint using the vehicle seat belts. W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor position directly behind the child seat to secure a child restraint top tether strap.
of reach of children. It is r ecommended that befor e installing the child restraint, buckle the seat belt so the seat belt is tucked behind the child restraint and out of reach.
Again, carefully follow the installation instructions that were pr ovided with the child restraint system. The rear seat lower anchorages are round bars, located at the rear of the seat cushion wher e it meets the seatback, and ar e visible when you lean into the rear seat to install the child restraint.
In addition, ther e ar e tether strap anchorages behind each rear seating position located on the back of the seat. Latch Anchorages (Four -Door Models) T ether Strap Mounting (T wo-Door Models) 68 TH.
Many , but not all restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means for adjusting the tension of the strap.
W ARNING! Improper installation of a child restraint to the LA TCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint.
Route the tether strap over the seatback and attach the hook to the tether anchor located on the back of the seat. For the outboar d seating positions, route the tether under the head rest, and attach the hook to the tether anchor located on the back of the seat.
ENGINE BREAK-IN RECOMMENDA TIONS A long br eak-in period is not requir ed for the engine in your vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable.
SAFETY TIPS T ransporting Passengers NEVER TRANSPORT P ASSENGERS IN THE CARGO AREA. W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed.
If you are requir ed to drive with the trunk/liftgate open, make sure that all windows are closed and the climate control BLOWER switch is set at high speed. DO NOT use the recir culation mode. The best protection against carbon monoxide entry into the vehicle body is a pr operly maintained engine exhaust system.
Defroster Check operation by selecting the defrost mode and place the blower control on high speed. Y ou should be able to feel the air directed against the windshield.
I n f o r m a t i o n P r o v i d e d b y :.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 8 1 ▫ Inside Day/Night Mirror ................ 8 1 ▫ Outside Mirrors ...................... 8 2 䡵 uconnect 威 phone ....................... 8 2 䡵 Seats .
▫ T o Raise The Rear Seat ................. 9 2 䡵 T o Open And Close The Hood ............. 9 3 䡵 Lights .............................. 9 4 ▫ Multifunction Lever ................... 9 4 ▫ Parking Lights, Instrument Panel Lights And Headlights .
▫ Manual T ransmission ................. 1 0 4 ▫ T o Accelerate For Passing .............. 1 0 4 䡵 Electrical Power Outlet ................. 1 0 5 䡵 Cupholders .......................... 1 0 7 ▫ Front Cupholders .................... 1 0 7 ▫ Rear Cupholders .
▫ Door Frame Installation — Four-Door Models ........................... 1 2 8 䡵 Soft T op — T wo Door Models ............ 1 3 0 ▫ Folding Down The Soft T op ............. 1 3 3 ▫ Putting Up The Soft T op ............... 1 4 2 䡵 Soft T op (Four-Door Models) .
MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical adjustment of the mirror . The mirror should be adjusted to center on the view through the r ear window . Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
Outside Mirrors T o receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror . W ARNING! • V ehicles and other objects seen in the right side convex mirror will look smaller and farther away than they really are.
V oice Recognition Button (uconnect 威 phone) When you press this button, a “Not Equipped with uconnect 威 ” message will display on your radio screen. Phone Button (uconnect 威 phone) When you press this button, a “Not Equipped with uconnect 威 ” message will display on your radio screen.
W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Only adjust a seat while the vehicle is parked.
Front Seatback Recline Lean forward before lifting the handle, then lean back to the desired position and release the handle. Lift the handle to return the seatback to an upright position. Front Easy Entry Seats — T wo Door Models Push the lever on the seatback rearwar d (toward the rear of the vehicle) to tilt the entire seat forwar d.
Easy Entry Combination Lever — If Equipped Easy Entry Seat 86 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
1. T o return the seat to a sitting position, rotate the seatback upright until it locks. 2. Push the seat rearward until the track locks. NOTE: • The front driver seat has a full recliner memory , which will allow the seatback to be returned to its original position.
The restraints may be raised without pushing in the button. The rear head r estraints are not adjustable. Fold and T umble Rear Seat — T wo Door Models NOTE: • Prior to folding the rear seat, it may be necessary to reposition the fr ont seats. • Be sure that the front seats are fully upright and positioned forward.
2. Slowly flip the entire seat forward. 3. Return the seat to the normal position. 4. Raise the rear seatback using the assist strap and firmly lock the seat into position. Removing the Rear Seat — T wo Door Models W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
1. Remove the three rear subwoofer (if equipped) mounting nuts using a 15 mm socket. 2. Unplug the electrical connector from the rear sub- woofer (if equipped). 3. Fold the rear seat forward following steps 1 through 3 under “Fold and T umble Rear Seat” in this section.
Replacing the Rear Seat — T wo Door Models Reverse the steps for removing the seat. W ARNING! • T o help protect against personal injury , passengers should not be seated in the rear cargo area with the rear seat folded down or removed from the ve- hicle.
T o Fold Down the Rear Seat Locate the pull strap (lower outboard side of seat), and pull it toward you until the seatback r eleases. T o Raise the Rear Seat Raise the seatback and lock it into place. If interference from the car go area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position.
TO OPEN AND CLOSE THE HOOD Release both the hood latches. Raise the hood and locate the safety latch, located in the middle of the hood opening. Push the latch to the left side of the vehicle, to open the hood. Y ou may have to push down slightly on the hood befor e pushing the safety latch.
LIGHTS Multifunction Lever The multifunction lever controls the operation of the parking lights, headlights, headlight beam selection, passing light, fog lights, instrument panel light dimming and turn signals. The lever is located on the left side of the steering column.
T o change the brightness of the instrument panel lights, rotate the center portion of the multifunction lever up or down. NOTE: • Lens fogging can occur under certain atmospheric conditions. This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor .
T urn Signals Move the multifunction lever up or down, and the arrows on each side of the instrument cluster flash, to show proper operation of the front and r ear turn signal lights. If either light has a very fast flash rate, check for a defective outside light bulb.
upward detent position, or if equipped, when the UN- LOCK button is pressed on the Remote Keyless Entry (RKE) transmitter . Also, the rear cargo lamp may be turned on by pr essing the lens.
Daytime Brightness Feature Certain instrument panel components (instrument clus- ter , radio display) can be illuminated at full brightness during the daytime. This can be helpful when driving with your headlights on during the daytime, such as in a parade or a funeral procession.
CAUTION! In cold weather , always turn off the wiper switch and allow the wipers to return to the park position before turning off the engine. If the wiper switch is left on and the wipers freeze to the windshield, damage to the wiper motor may occur when the vehicle is restarted.
Windshield W ashers T o use the washer , pull the lever toward you and hold while spray is desired. If the lever is pulled while in the delay range, the wiper will operate for two wipe cycles after the lever is released, and then resume the intermit- tent interval previously selected.
Push down on the lever to unlock the steering column. W ith one hand firmly on the steering wheel, move the steering column up or down, as desired. Pull upwar ds on the lever to lock the column firmly in place. W ARNING! T ilting the steering column while the vehicle is moving is dangerous.
ELECTRONIC SPEED CONTROL — IF EQUIPPED Electronic Speed Control takes over the accelerator op- eration at speeds greater than 35 mph (56 km/h). The Electronic Speed Control lever is located on the right side of the steering wheel.
W ARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. Y ou could accidentally set the system or cause it to go faster than you want. Y ou could lose control and have an accident. Always leave the Electronic Speed Control system off when you are not using it.
tapping the Electronic Speed Control lever three times will increase speed by 3 mph (4.8 km/h), etc. T o decrease speed while Electr onic Speed Contr ol is on, push down and hold SET DECEL. Release the Electronic Speed Control lever when the desired speed is r eached, and the new speed will be set.
On steep hills, a gr eater speed loss or gain and/or more frequent downshifts (auto transmission only) may occur so it may be preferable to drive without Electr onic Speed Control.
W ARNING! T o avoid serious injury or death: • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure.
CUPHOLDERS Front Cupholders The front cupholders ar e located in the center console. NOTE: The front cupholder insert is removable for cleaning. Rear Cupholders The r ear cupholders ar e located on the back of the center console.
STORAGE Console Storage Compartment T o lock or unlock the storage compartment, insert igni- tion the key and turn. T o open the storage compartment, press the latch and lift the cover . Rear Storage Compartment The rear storage compartment cover is held by a spring- loaded latch.
DUAL T OP — IF EQUIPPED If your vehicle is equipped with a Dual T op, you must remove one of the tops from the vehicle. If the soft top is removed, the pivot brackets must also be removed from the sport bar . The soft top was installed at the factory for shipping purposes only .
2. Remove the hard top. Refer to “Freedom T op Thr ee- Piece Modular Hard T op — Front/Rear Panel Removal” later in this section. 3. Remove the soft top bow assembly pivot bracket screws (two per side) using a #T30 T orx 威 head driver . 4. Using a rubber mallet, carefully tap the knuckles from the left and right metal pivot brackets.
6. Reinstall the hard top. Refer to “Freedom T op Three- Piece Modular Hard T op — Front/Rear Panel Installa- tion” later in this section. Installing the Soft T op NOTE: The following procedures ar e for first time set up only . For future soft top procedur es, refer to “Soft T op” in this section.
3. Install the door frames. Refer to “Door Frame” in this section. 4. If the soft top has been r emoved, follow these steps to reinstall the soft top.
d. Screw the pivot screws back into place using a #T30 T orx 威 head driver . Secure them until they are snug, being careful not to cr oss-thread the scr ews or over- tighten. CAUTION! Do not overtighten the screws. Y ou can strip the screws if they are overtightened.
NOTE: Be sure the wire harness in the left rear corner is not tangled in the soft top bows before you lift the top. 6. Unsnap and r emove the black boot cover . This cover should be discarded. It was intended as a protective cover for shipping only . NOTE: A visual instruction sheet is enclosed in the dual top wrap.
CAUTION! Failure to follow these cautions may cause interior water damage, stains or mildew: • It is recommended that the top be free of water prior to panel removal. Removing the top, opening a door or lowering a window while the top is wet may allow water to drip into the vehicles interior .
3. T urn the rear L-shaped lock (located above the shoul- der belt anchorage). 4. T urn the rear fasteners (knobs) (located on the over- head speaker bar assembly) counter-clockwise until they can be removed.
5. Unlatch the header panel latch located at the top of the windshield. 6. Remove the panel. T o remove the right panel, follow the steps above except for Step 2. Front Panel(s) Installation NOTE: Set the panels on the windshield frame so that there is no overhang.
Front Panel(s) Installation Only (With Rear Hard T op Removed) 1. T urn the left and right panels over and move the spacer block (located on the rear of the panel) upward 90 degrees. NOTE: The front panel(s) must be positioned properly to ensure sealing.
4. Remove the six T orx 威 head scr ews that secur e the hard top to the vehicle (along the interior bodyside) using a #40 T orx 威 head driver . 5. Open the swing gate all the way to ensure clearance of the rear window glass. Lift the r ear window glass.
CAUTION! Make sure the storage cap is installed to prevent foreign materials from entering the washer tube and clogging system, and also to prevent fluid from being sprayed into the rear of the vehicle. 8. Disconnect the wire harness from the hard top by pressing the tab at the side of the connector and pulling to disconnect.
Rear Hard T op Installation NOTE: If the door frames are installed from soft top usage, they must be removed prior to installation of the hard top. 1. Inspect the hard top seals for damage and replace if necessary . 2. Install the har d top using the same steps for removal in reverse or der .
CAUTION! (Continued) • Careless handling and storage of the removable door frame(s) may damage the seals, causing water to leak into the vehicle’s interior . • The door frame(s) must be positioned properly to ensure sealing. Improper installation can cause water to leak into the vehicle’s interior .
2. Place one hand on the upper rear and one hand on the front of the door frame. 3. Pull the frame toward you with your r earward hand to remove the frame fr om the vehicle. 4. Screw the knobs back into the door frame and fold for storage. Store in a secur e location.
Door Frame Installation — T wo-Door Models 1. Unfold door frame and unscrew thumbscrews. 2. Set the door frame pin into the hole on top of the body side, behind the door opening. 3. After the door frame pin has been set into the body side hole, carefully set the front of the door frame into the rubber seal at the top of the windshield.
5. Starting with the front knob, screw in and tighten both knobs. Repeat on the other side. Door Frame Removal — Four-Door Models 1. Unscrew and remove the two forward most door frame attachment knobs. W ARNING! Use both hands to remove the door frames.
2. Place one hand on the upper rear and one hand on the upper front of the fr ont door frame. 3. Pull the frame toward you with your front hand to remove the frame fr om the vehicle. 4. Unscrew and remove the remaining door frame at- tachment knob on the rear door frame.
5. Place one hand on the upper rear and one hand on the upper front of the r ear door frame. Pull the frame toward you with your rear hand to r emove the frame from the vehicle. 6. Screw the knob back into the door frame and fold for storage. Store in a secur e location.
Door Frame Installation — Four-Door Models 1. Install the rear door frame first. 2. Set the door frame pin into the hole on top of the body side, just behind the rear door opening.
5. Carefully set the fr ont of the fr ont door frame in the rubber seal at the top of the windshield. Then, clip the front of the door rail over the side bar making sure that the material for the side bar cover is not pinched by the door frame. Position the rear of the fr ont door frame to lay on top of the front of the r ear door frame.
SOFT TOP — TWO DOOR MODELS Please visit the owners section of Jeep.com for instruc- tional videos. CAUTION! The soft top is not designed to carry any additional loads such as roof racks, spare tires, building, hunt- ing, or camping supplies, and/or luggage, etc.
CAUTION! (Continued) • Refer to “Appearance Care for Fabric T op Models” in Section 7 of this manual. It contains important information on cleaning and caring for your vehi- cle’s fabric top. • Do not use any tools (screwdrivers, etc.) to pry or force any of the clamps, clips, or retainers securing the soft top.
CAUTION! Failure to follow these cautions may cause interior water damage, stains or mildew on the top material: • It is recommended that the top be free of water prior to opening it. Operating the top, opening a door or lowering a window while the top is wet may allow water to drip into the vehicle’s interior .
Folding Down The Soft T op 1 — Header Bow 6 — Body Side Retainer 2 — 2–Bow 7 — Quarter W indow 3 — 3–Bow 8 — Check Strap 4 — Sail Panel 9 — Front Retainer — Quarter W indow 5 —.
1 — Zipper Start 2 — Zipper Finish 3 — Swing Gate Bar 4 — Swing Gate Brackets 5 — Sail Panels 134 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
NOTE: Clean side and rear windows before removal to assist in preventing scratching during removal of the soft top. If zippers ar e difficult to operate due to r oad dust, etc., clean them with a mild soap solution and a small brush. Cleaning products are available thr ough your authorized dealer .
3. Unclip and move the sun visors to the side. 4. Release the header latches and leave the hooks in the loops on the windshield. 5. Open the swing gate. 6. Before unzipping the rear window , release the first 3 in (7.6 cm) of both sail panels from the channel.
• Unzip the r ear window starting at the right lower corner of the window . Pull the zipper up, across the top and down to the left lower corner . Zipper pulls will stay on the rear window . Pull down on the rear window to disengage it fr om the zipper on the top cover .
10. Finish releasing the sail panel retainers fr om the body side channel at the rear corners of the vehicle. NOTE: When releasing the sail panel r etainers, it is helpful to pull down on the rear r oof bow . 1 1. As you begin to lower the top, fold the sail panels so that they rest on top of the soft top.
12. The swing gate brackets do not need to be removed unless the hard top is being installed. T o remove the swing gate brackets, pull the front of the bracket forward while r olling the entir e bracket back in towar d the vehicle to disengage. 13. Completely release the latches fr om the loops on the windshield frame.
14. Make sure the plastic sleeves ar e slid forward over the Sunrider 威 link (Sunrider 威 Models only). 15. Unlatch the side bows from both door rails (Sun- rider 威 Models only). 16. Before lowering the top, open the swing gate to prevent possible damage to the rear center high-mounted brake light.
NOTE: Help from another person will ease this opera- tion. 17. T uck the fabric and the check straps between the bows and as far inward as possible. This will keep any portion of the top from flapping outside of the vehicle.
Putting Up The Soft T op 1 — Header Bow 6 — Body Side Retainer 2 — 2– Bow 7 — Quarter W indow 3 — 3–Bow 8 — Check Strap 4 — Sail Panel 9 — Front Retainer — Quarter W indow 5 — .
1 — Zipper Start 2 — Zipper Finish 3 — Swing Gate Bar 4 — Swing Gate Brackets 5 — Sail Panels 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 143 I n f o r m a t i o n P r o v i d e d b y :.
1. Unclip and move the sun visors to the side. 2. Install door frames, if r emoved. Refer to “Door Frame” in this section. 3. Make sure the plastic sleeve is slid rearward over Sunrider 威 link (Sunrider 威 Models only).
6. Make sure the Sunrider 威 bracket on the side bows latches to the door rails (Sunrider 威 Models only). 7. Open the header latches and engage the hook on each side onto the windshield loops (do not close the latches).
9. Move to the rear of the vehicle and gently pull the sail panels over the rear r oof bow . 10. Partially install the sail panel r etainers into the body side channel, leaving the last 3 in (7.6 cm) towar d the r ear window loose (on both sides). Pulling down on the rear roof bow (3–bow) will aid to reach the channel with the retainers.
1 1. T o install the side windows, affix the window tem- porarily by attaching to the V elcro 威 in the rear corner . Start the zipper but close only about 1 in (2.5 cm). 12. Insert the fr ont retainer of the window into the door channel, making sure the retainer is fully seated and properly positioned on the door frame.
13. Insert the retainer along the bottom edge of the window into the bottom side channel, beginning at the front and working to the rear of the vehicle. Finish by closing the zipper completely and attaching the V elcro 威 along the top and rear of the window .
14. Locate the black swing gate bar . Slide the swing gate bar over the receiver at the bottom inside of the rear window . The spongy part of the seal should be down and pointed outward to seal with the swing gate when closed.
15. Install the rear window by starting both zipper ends at the lower left corner of the rear window opening. Ensure that the zippers are properly started and aligned before zipping to pr event damage.
16. Run the zipper fully around to the right side of the window . 17. Grasp the swing gate bar and position it into the swing gate brackets. 18. Apply downward pr essure on the top corner of the rear soft top bow (3–bow), then complete attaching the sail panel retainers into the body side channel.
20. Close the header latches and return the sun visors to their secured position. SOFT TOP (FOUR-DOOR MODELS) Please visit the owner’s section of Jeep.com for instruc- tional videos. CAUTION! The soft top is not designed to carry any additional loads such as roof racks, spare tires, building, hunt- ing, or camping supplies, and/or luggage, etc.
Place the vehicle in a warm area. Pull steadily on the top fabric. The vinyl will str etch back to its original size and the top can then be snapped into place. If the tempera- ture is 41°F (5°C) or below , do not attempt to put the top down or roll the rear or side curtains.
W ARNING! • Do not drive the vehicle with the rear window curtain up unless the side curtains are also open. Dangerous exhaust gases which can kill could enter the vehicle. • The fabric upper doors and fabric top are designed only for protection against the elements.
NOTE: Do not remove any of the three attachment knobs unless you are planning on installing the hard top. 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 155 I n f o r m a t i o n P r o v i d e d b y :.
Folding Down The Soft T op 1 — Header Bow 6 — Body Side Retainer 1 1 — Plastic Retainer 2 — 2–Bow 7 — Quarter W indow 3 — 3–Bow 8 — Check Strap 4 — 4–Bow 9 — Front Retainer —.
1 — Zipper Start 2 — Zipper Finish 3 — Swing Gate Bar 4 — Swing Gate Brackets 5 — Sail Panels 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 157 I n f o r m a t i o n P r o v i d e d b y :.
NOTE: Clean side and rear windows before removal to assist in preventing scratching during removal of the soft top. If zippers ar e difficult to operate due to r oad dust, etc., clean them with a mild soap solution and a small brush. Cleaning products are available thr ough your authorized dealer .
3. Unclip and move the sun visors to the side. 4. Release the header latches and hooks from the loops on the windshield frame. 5. Open the swing gate. 6. Before unzipping the rear window , release the first 3 in (7.6 cm) of both sail panels from the channel.
• Unzip the r ear window starting at the right lower corner of the window . Pull the zipper up, across the top and down to the left lower corner . Zipper pulls will stay on the rear window . Pull down on the rear window to disengage it fr om the zipper on the top cover .
10. Finish releasing the sail panel retainers fr om the body side channel at the rear corners of the vehicle. NOTE: When releasing the sail panel r etainers, it is helpful to pull down on the rear r oof bow . 1 1. Fold the sail panels so that they rest on top of the soft top.
12. The swing gate brackets do not need to be removed unless the hard top is being installed. T o remove the swing gate brackets, pull the front of the bracket forward while r olling the entir e bracket back in towar d the vehicle to disengage. 13. Grasp the front side bow behind the header , and lift the top.
14. Fold back the front section of the top, pulling the fabric r earward. Gently rest the header on top of the rear portion of the deck. 15. Fold the top material so that the plastic r etainers form a “W” as shown. Enter the vehicle and move the material into two folds.
16. Release the side bows by pressing down on the latch above the front of the r ear door . Push the top rearward to disengage. Repeat this step on the other side. 17. Before lowering the top, open the swing gate to prevent possible damage to the rear center high-mounted brake light.
NOTE: Help from another person will ease this opera- tion. 19. T uck the fabric and the check straps between the bows as far inside as possible. This will keep any portion of the top from flapping outside of the vehicle.
Putting Up The Soft T op 1 — Header Bow 6 — Body Side Retainer 1 1 — Plastic Retainer 2 — 2–Bow 7 — Quarter W indow 3 — 3–Bow 8 — Check Strap 4 — 4–Bow 9 — Front Retainer — Q.
1 — Zipper Start 2 — Zipper Finish 3 — Swing Gate Bar 4 — Swing Gate Brackets 5 — Sail Panels 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 167 I n f o r m a t i o n P r o v i d e d b y :.
NOTE: Be extremely careful when putting up the soft top to pr event the doors from getting scratched. It may be helpful to open the rear doors. 1. Install the door frames, if removed. Refer to “Door Frame” in this section. 2. Undo the straps used to secur e the top in the down position and store in secur e location.
5. Insert the slider feature of the knuckles into the door frame tracks and slide the top forward. 6. Ensure that the top locks into the Sunrider 威 locking mechanisms that are located above the fr ont of the rear doors.
7. Unclip and move the sun visors to the side. 8. Standing on the side of the vehicle, lift the top by the side bow until it rests on the windshield frame. 9. Before attaching the header latches, be sure the top retainers above the doors do not get trapped between the top and the door frame.
10. Open the header latches and engage the hook on each side onto the windshield loops (do not close the latches). 1 1. If the swing gate brackets wer e removed, install them by hooking the rear edge of the bracket on the interior side of the body channel.
12. Ensure that the straps are positioned correctly before pulling the sail panels over the rear r oof bow (4–bow). Partially install the sail panel retainers into the body side channel, leaving the last 3 in (7.6 cm) toward the rear window loose (on both sides).
13. T o install the side windows, af fix the window tem- porarily by attaching it to the V elcro 威 in the upper rear corner . Start the zipper but close only about 1 in (2.5 cm). 14. Insert the fr ont retainer of the window into the door channel, making sure the retainer is fully seated and properly positioned on the door frame.
15. Insert the retainer along the bottom edge of the window into the bottom side channel, beginning at the front and working to the rear of the vehicle. Finish by closing the zipper completely and attaching the V elcro 威 along the top and rear of the window .
16. Locate the black swing gate bar . Slide the swing gate bar over the receiver at the bottom inside of the rear window . The spongy part of the seal should be down and pointed outward to seal with the swing gate when closed.
17. Install the rear window by starting both zipper ends at the lower left corner of the rear window opening. Ensure that the zippers are properly started and aligned before zipping to pr event damage. 18. Run the first zipper fully ar ound to the right side of the window .
21. Open the doors and insert the top r etainers into the channels in the door frame above the doors, starting at the front and working towar d the rear of the vehicle. 22. Ensure the plastic r etainer is tucked in pr operly at the B-pillar and not pinching the seal.
23. Close the header latches and return the sun visors to their secured position. SUNRIDER 姞 (TWO-DOOR MODELS) — IF EQUIPPED CAUTION! Operating the top, opening a door or lowering a window while the top is wet may allow water to drip into the vehicle’s interior .
Opening the Sunrider 姞 1. Insert your finger behind the plastic retainer . Pull down and roll the retainer out of the channel. Repeat this on the other side. 2. Unclip and move the sun visors to the side. 3. Release the header latches from the loops on the windshield frame.
4. Slide the plastic sleeve forward. 5. Grasp the header and lift the top back. Make sure the material is folded back as shown. NOTE: The Sunrider 威 latch on the door rail should not be activated for Sunrider 威 use. If activated, the soft top must be reinstalled starting fr om the sail panels.
6. Locate the straps to secure the side bows. W rap the straps around the bows as shown. Repeat on the other side. 7. Reposition the sun visors. Closing the Sunrider 姞 1. Remove the straps from the side bows. 2. Unclip and move the sun visors to the side.
SUNRIDER 姞 (FOUR-DOOR MODELS) — IF EQUIPPED CAUTION! Operating the top, opening a door or lowering a window while the top is wet may allow water to drip into the vehicle’s interior .
3. Release the header latches from the loops on the windshield frame. 4. Grasp the front side bow behind the header , and lift the top. 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 183 I n f o r m a.
5. Fold back the front section of the top and gently r est the header on top of the rear portion of the deck. 6. Fold the top material so that the plastic retainers form a “W” as shown. Enter the vehicle and move the material into two folds. Ensur e that the straps are securely stowed.
T o Close Perform the above steps in the opposite order . NOTE: Failure to fold the fabric rearward will allow the material to sag and may block the rearview mirr or . FOLDING WINDSHIELD The fold-down windshield and removable side bars on your vehicle are structural elements that can provide some protection in some accidents.
Raise the windshield and reinstall the side bars as soon as the task that requir ed their removal is completed and before you return to on-road driving. Both you and your passenger should wear seat belts at all times, on-road and off-r oad, r egardless of whether the windshield is raised or folded down.
Lowering the Windshield and Removing Side Bars 1. Lower the fabric top or remove the hard top following the instructions in this manual. NOTE: T o assist in properly reinstalling side bars, mark the original locations prior to removing.
NOTE: Pull side bar out horizontally when r emoving. CAUTION! Do not remove the head impact foam from the side bars, as damage to the foam may result. NOTE: Store all of the mounting bolts in their original threaded holes and tighten for safekeeping. 5.
7. Remove the windshield wiper arms by first pulling the wiper away from the windshield and out to the “lock” position. Unsnap the wiper arm nut caps, and remove the retaining nuts. Lift the wiper arms off and store them in the center console or securely behind the rear seat.
9. Lower the windshield gently until it contacts the rubber hood bumpers. 10. Secure the windshield by passing a cinch strap through the footman hoop on the center of the hood and on the center of the windshield frame. T ighten the strap to secure the windshield in place.
3. Attach the front of the side bar to the windshield frame. • Install the top two hex bolts (13 mm) first, then the lower side hex bolt (13 mm). The lower side bolt will not align until the top two bolts are installed. 4. T ighten all side bar attachment bolts.
REAR WINDOW FEA TURES — HARD TOP ONL Y Rear Window Wiper/W asher — If Equipped A rotary ring switch on the control lever (located on the right side of the steering column), contr ols the operation of the r ear wiper/washer function. Rotating the center of the switch up to the “On” position will activate the wiper .
If the rear wiper is operating when the ignition is turned to the LOCK position, the wiper will automatically r eturn to the “Park” position. When the vehicle is r estarted, the wiper will resume function at whichever position the switch is set at.
I n f o r m a t i o n P r o v i d e d b y :.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Features ............... 1 9 8 䡵 Instrument Cluster .................... 1 9 9 䡵 Instrument Cluster Description ............ 2 0 0 䡵 Compass And T rip Computer — If Equipped .
䡵 Sales Code (RER/REN) — AM/FM/CD/DVD Radio – If Equipped .................... 2 3 2 ▫ Operating Instructions — V oice Recognition System (VR) — If Equipped ............. 2 3 2 ▫ Operating Instructions — uconnect 威 phone — If Equipped .
▫ Selecting uconnect 威 studios (Satellite) Mode ............................. 2 5 7 ▫ Satellite Antenna ..................... 2 5 7 ▫ Reception Quality .................... 2 5 7 ▫ Operating Instructions — uconnect 威 studios (Satellite) Mode .
INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 6 — Climate Contr ols 2 — Instrument Cluster 7 — Power Outlet 3 — Horn 8 — Lower Switch Bank 4 — Radio 9 — Auxiliary Power Outlet / Cigar Lig.
INSTRUMENT CLUSTER 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 199 I n f o r m a t i o n P r o v i d e d b y :.
INSTRUMENT CLUSTER DESCRIPTION 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank. NOTE: When the ignition switch is turned to OFF , the fuel gauge, voltmeter , oil pressure and temperature gauges may not show accurate readings. When the engine is not running, turn the ignition switch to ON to obtain accurate readings.
7. Seat Belt Reminder Light A warning chime and an indicator light will alert you to buckle the seat belts. When the belt is buckled, the chime will stop, but the light will stay on for about six seconds, until it times out. 8. T urn Signal Indicators The arrows will flash with the exterior turn signals when the turn signal lever is operated.
indicate that the parking brake is applied, that the brake fluid level is low , or that there is a problem with the anti-lock brake system reservoir . If the light remains on when the parking brake ha.
V ehicles equipped with the Anti-Lock Brake System (ABS), are also equipped with Electronic Brake Force Distribution (EBD). In the event of an EBD failure, the Brake W arning Light will turn on along with the ABS Light. Immediate repair to the ABS system is r equired.
14. Rear Axle Lock Indicator — If Equipped This light indicates when the rear axle lock has been activated. 15. T achometer Indicates the engine speed in revolutions per minute (RPM). CAUTION! Do not operate the engine with the tachometer pointer in the red area.
CAUTION! Driving with a hot engine cooling system could damage your vehicle. If temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range.
21. Odometer / T rip Odometer Reset Button Press this button to change the display fr om odometer to either of the two trip odometer settings. T rip A or T rip B will appear when in the trip odometer mode. Press and hold the button for two seconds to reset the trip odometer to 0 miles or kilometers.
maintain correct tire pressur e, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pr essure telltale. Y our vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly .
U.S. federal regulations requir e that upon transfer of vehicle ownership, the seller certify to the pur chaser the correct mileage that the vehicle has been driven.
cluster . T o reset the oil change indicator system (after performing the scheduled maintenance), r efer to the following procedur e: 1. T urn the ignition switch to the ON position (Do not start the engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds.
26. Electronic Stability Program (ESP) Indicator Light / T raction Contr ol System (TCS) Indicator Light If the Electronic Stability Program (ESP) / T raction Control System (TCS) Indicator Light begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible.
30. Electronic Throttle Contr ol (ETC) Light This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected while the engine is run- ning, the light will either stay on or flash depending on the natur e of the problem.
COMP ASS AND TRIP COMPUTER — IF EQUIPPED The Compass/T rip Computer is located in the instru- ment cluster . It featur es a driver-interactive display (dis- plays information such as outside temperature, compass direction, and trip information).
Estimated Range (DTE) This display shows the estimated distance that can be traveled with the fuel remaining in the tank. This esti- mated distance is based on the most r ecent trip informa- tion: (A verage Fuel Economy) x (Fuel Remaining). This display cannot be reset.
Compass Calibration The compass on your vehicle will automatically calibrate when new , and will continuously adjust itself over the life of the vehicle. If the CAL indicator is on (or flashing), drive slowly (under 10 MPH) in an open area until the CAL indicator is off.
If the compass appears erratic or inaccurate and the variance has been properly set, you may wish to manu- ally recalibrate the compass. T o manually calibrate the compass: 1.
the variance mode and r elease the button when the V AR symbol appears. The current variance value will also be displayed. T o change the zone, press the left button once to increment the zone. The default is Zone 8. After Zone 15, the values will wrap around to Zone 1.
SALES CODE REQ — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it.
4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save the time change. 5. T o exit, press any button/knob or wait five seconds. The clock can also be set by pressing the SETUP button and selecting the “SET HOME CLOCK” entry .
Push the rotary TUNE/SCROLL control knob a fourth time and BALANCE will display . T urn the TUNE/ SCROLL control knob to the right or left to adjust the sound level from the right or left side speakers. Push the r otary TUNE/SCROLL control knob a fifth time and F ADE will display .
Program T ype 16-Digit Character Display Personality Persnlty Public Public Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Soft Soft Soft Rock Soft Rck Soft Rh.
• DISC Play/Pause - Y ou can toggle between playing the DVD and pausing the DVD by pushing the SELECT button (if equipped). • DVD Play Options - Selecting the DVD Play Options will display the fol.
TUNE/SCROLL control knob to adjust the minutes. Press the TUNE/SCROLL control knob again to save changes. • Player Defaults - Selecting this item will allow the user to scroll through the following items and set defaults according to customer pr eference.
Aspect Ratio — If Equipped Selecting this item allows you to choose between wide screen, pan scan, and letter box. AutoPlay — If Equipped When this is set to On and a DVD video is inserted, it will bypass the DVD menu screen and automatically play the movie.
Every time a preset button is used, a corresponding button number will display . Button s1-6 These buttons tune the radio to the stations that you commit to pushbutton memory {12 AM, 12 FM, and 12 Satellite (if equipped) stations}. DISC Button Pressing the DISC button will allow you to switch from AM/FM modes to Disc modes.
Radio display will show ⬙ LOADING DISC ⬙ when the disc is loading and “READING DISC” when the radio is reading the disc. CAUTION! This CD player will accept 4–3/4 in (12 cm) discs only . The use of other sized discs may damage the CD player mechanism.
R W/FF (CD MODE) Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released, or R W or another CD button is pressed. The RW (Rewind) button works in a similar manner . AM or FM Button (CD MODE) Switches the radio into the AM or FM radio mode.
Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and computer files (including MP3/ WMA files). Discs created with an option such as ⬙ keep disc open after writing ⬙ ar e most likely multisession discs.
ID3 T ag information for artist, song title, and album title are supported for ID3 version 1 tags. ID3 version 2 is not supported by the radios. Playlist files are not supported. MP3 Pro files are not supported. Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium.
INFO Button (DISC Mode for MP3/WMA Play) Pressing the INFO button r epeatedly will scroll through the following T AG information: Song T itle, Artist, File Name, and Folder Name (if available). Press the INFO button once more to return to ⬙ elapsed time ⬙ priority mode.
TIME Button (Auxiliary Mode) Press the TIME button to change the display from elapsed playing time to time of day . The time of day will display for five seconds.
intended for home and other limited viewing uses only , unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. DTS™ ⬙ DTS™ ⬙ and ⬙ DTS™ 2.
T o Manually Set the Clock — RER/REN 1. T urn on the radio. 2. T ouch the screen wher e the time is displayed. 3. T ouch the scr een wher e “User Clock” is displayed. The clock setting menu will appear on the screen. 4. T o move the hour forward, touch the screen wher e the word “Hour” with the arrow pointing upward is dis- played.
Show T ime if Radio is Off When selected, this featur e will display the time of day on the touch screen when the radio is turned off. Proceed as follows to change the current setting: 1. T urn on the radio. 2. T ouch the screen where the time is displayed.
SALES CODE RES — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Pr ess the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection.
Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decr ease the mid-range tones. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display .
SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stor ed into pushbutton memory . The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corresponding button number will display .
If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number , and index time in minutes and seconds. Play will begin at the start of track 1.
the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tracks in CD and MP3 modes. TIME Button Press this button to change the display fr om a large CD playing time display to a small CD playing time display .
Supported Medium Formats (File Systems) The medium formats supported by the radio ar e ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs recorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor- mally .
Supported MP3 File Formats The radio will r ecognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take mor e time to start playing the MP3 files.
SALES CODE RES/RSC — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) AND SIRIUS RADIO NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. V oice Recognition System (Radio) — If Equipped Refer to “V oice Recognition System (VR)” in Section 3.
5. T o exit, press any button/knob or wait five seconds. The clock can also be set by pr essing the SETUP button. For vehicles equipped with satellite radio, pr ess the SETUP button, use the TUNE/SCROLL control to select SET CLOCK, and then follow the above procedur e, starting at Step 2.
Push the rotary TUNE/SCROLL control knob a fourth time and BALANCE will display . T urn the TUNE/ SCROLL control knob to the right or left to adjust the sound level from the right or left side speakers. Push the r otary TUNE/SCROLL control knob a fifth time and F ADE will display .
Program T ype 16-Digit Character Display Personality Persnlty Public Public Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Soft Soft Soft Rock Soft Rck Soft Rh.
AM/FM Button Press the button to select either AM or FM mode. SET/RND Button — T o Set the Pushbutton Memory When you ar e r eceiving a station that you wish to commit to pushbutton memory , press the SET/RND button. The symbol SET 1 will now show in the display window .
• This radio is capable of playing compact discs (CD), recor dable compact discs (CD-R), r ewritable compact discs (CD-R W), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks. Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up.
If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not removed, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF . NOTE: Ejecting with the ignition OFF is not allowed on convertible or soft-top models (if equipped).
Notes On Playing MP3 Files The radio can play MP3 files; however , acceptable MP3 file r ecording media and formats are limited. When writing MP3 files, pay attention to the following restric- tions. Supported Media (Disc T ypes) The MP3 file recor ding media supported by the radio are CDDA, CD-R, CD-R W , MP3, and CDDA+MP3.
Discs cr eated with an option such as ⬙ keep disc open after writing ⬙ are most likely multisession discs. The use of multisession for CD audio or MP3 playback may r esult in longer disc loading times. Supported MP3 File Formats The radio will r ecognize only files with the *.
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take mor e time to start playing the MP3 files.
Press and hold the INFO button again for thr ee seconds to return to ⬙ elapsed time ⬙ display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows.
sports, news, entertainment, and pr ogramming for chil- dren, dir ectly fr om its satellites and br oadcasting studios. NOTE: Sirius service is not available in Hawaii and has limited coverage in Alaska.
ESN/SID Access W ith REN/RER Radios While in SA T mode, press the MENU button on the radio faceplate. Next, touch the SUBSCRIPTION tab on the touch screen. All the ESNs that apply to your vehicle will display . ESN/SID Access W ith REU Radio While in SA T mode, press the MENU button on the radio faceplate.
• Driving under wide bridges or along tall buildings can cause intermittent reception. • Placing objects over or too close to the antenna can cause signal blockage. Operating Instructions — uconnect 姞 studios (Satellite) Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next channel in the direction of the arr ows. TUNE Control (Rotary) T urn the r otary TUNE/SCROLL control knob clockwise to increase or counter clockwise to decrease the channel.
SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number . This number is used to activate, deactivate, or change the Sirius subscription.
Operating Instructions — Video Entertainment System (VES)™ (If Equipped) Refer to separate “V ideo Entertainment System (VES)™ Guide.” CD/DVD MAINTENANCE T o keep a CD/DVD in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface.
CLIMA TE CONTROLS Manual Heater Only The controls for the heating/ventilation system in this vehicle consist of a series of r otary knobs. These comfort controls can be set to obtain the desired interior condi- tions. Mode Control The mode control allows you to choose from several pat- terns of air distribution as identified by the symbols.
NOTE: There is a dif ference in temperatur e between the upper and lower outlets for added comfort. The warmer air goes to the floor outlets. This featur e gives improved comfort during sunny but cool conditions. Floor Air is directed thr ough the floor outlets and side window demist outlets with a small amount through the defr ost outlet.
T emperature Control Use this control (right rotary knob) to regulate the temperature of the air inside the passenger compartment. The blue area of the scale indicates cooler temperatur es while the red ar ea indicates warmer temperatures.
Mode Control The mode control allows you to choose from several pat- terns of air distribution as identified by the symbols. Panel Air is directed through the outlets in the instr ument panel. These outlets can be adjusted to direct airflow . Bi-Level Air is dir ected through the panel and floor outlets.
Defrost Air is directed through the windshield and side window demist outlets. Use this mode with maxi- mum fan and temperature settings for best windshield and side window defrosting. NOTE: The air conditioning compressor operates in both Mix and Defrost even if the fan switch is not in the A/C position.
NOTE: If your air conditioning performance seems lower than expected, check the front of the A/C con- denser: located in front of the radiator , for an accumula- tion of dirt or insects. Clean with a gentle water spray from behind the radiator and through the condenser .
Air Conditioning Normal Operation Press this button to engage the air conditioning. A light will illumi- nate when the air conditioning system is engaged. Once the air conditioning is engaged, use a combination of the mode contr ol, fan speed control, and tempera- ture control to achieve your de- sired interior temperatur e.
Operating Tips W indow Fogging W indows will fog on the inside when the humidity inside the vehicle is high. This often occurs in mild or cool temperatures when it’s rainy or humid. In most cases turning on the air-conditioning (pr essing the snowflake button) will clear the fog.
W inter Operation When operating the system during the winter months, make sure the air intake, located directly in front of the windshield, is free of ice, slush, snow , or other obstructions. V acation Storage Anytime you store your vehicle or keep it out of service (i.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 2 7 5 ▫ Manual T ransmission ................. 2 7 5 ▫ Automatic T ransmission ............... 2 7 5 ▫ Normal Starting ..................... 2 7 5 ▫ Extreme Cold W eather (Below –20°F Or –29°C) .
䡵 Four–Wheel Drive Operation (Command- T rac™ Or Rock-T rac™) — If Equipped ....... 2 8 9 ▫ Operating Instructions/Precautions ....... 2 8 9 ▫ Shift Positions ...................... 2 9 1 ▫ Shifting Procedur e ................... 2 9 2 䡵 T rac-Lok™ Rear Axle — If Equipped .
䡵 Electronic Brake Contr ol System ........... 3 1 6 ▫ Anti-Lock Brake System (ABS) ........... 3 1 6 ▫ T raction Control System (TCS) ........... 3 1 7 ▫ Brake Assist System (BAS) .............. 3 1 7 ▫ Hill Start Assist (HSA) .............
䡵 T ir e Pressur e Monitor System (TPMS) ....... 3 4 7 ▫ Base System ........................ 3 5 0 ▫ General Information .................. 3 5 2 䡵 Fuel Requirements ..................... 3 5 3 ▫ Reformulated Gasoline ................ 3 5 3 ▫ Gasoline/Oxygenate Blends .
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! Do not leave children or animals inside parked vehicles in hot weather . Interior heat buildup may cause serious injury or death.
T ip Start Feature — Automatic T ransmission Only T urn the ignition switch to the ST AR T position and release it as soon as the starter engages. The starter motor will continue to run, but will automatically disengage itself when the engine is running.
W ARNING! (Continued) • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic transmission cannot be started this way . Unburned fuel could enter the catalytic converter and, once the engine has started, ignite and damage the converter and vehicle.
If the engine shows no sign of starting after two 15– second periods of cranking with the accelerator pedal held to the floor , repeat the “Normal Starting” or “Ex- treme Cold W eather” procedur es.
ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heater warms the engine, and permits quicker starts in cold weather . Connect the cor d to a standard 1 10-1 15 V olt AC electrical outlet with a grounded, three-wir e extension cord. The engine block heater cor d is found under the hood bundled in front of the battery tray .
NOTE: During cold weather , you may experience in- creased effort in shifting until the transmission fluid warms up. This is normal. Shifting Fully pr ess the clutch pedal before shifting gears. As you release the clutch pedal, lightly press the accelerator pedal.
Manual T ransmission Shift Speeds in MPH (KM/H) Engine Speeds 1 to 2 2 to 3 3 to 4 4 to 5 5 to 6 3.8L Accel. 15 (24) 24 (39) 34 (55) 47 (76) 56 (90) Cruise 10 (16) 19 (31) 27 (43) 37 (60) 41 (66) Downshifting Moving fr om a high gear down to a lower gear is recommended to preserve brakes when driving down steep hills.
Maximum Recommended Downshift Speeds CAUTION! Failure to follow the maximum recommended down- shifting speeds may cause the engine to overspeed and/or damage the clutch disc, even if the clutch pedal is pressed.
AUTOMA TIC TRANSMISSION — IF EQUIPPED CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
Brake/T ransmission Interlock Manual Override Y our vehicle may be equipped with a shift lock manual override. The manual override may be used in the event that the shift lever should fail to move fr om P ARK with the key in the ON position and the brake pedal pressed.
Automatic T ransmission with Overdrive Shifting from DRIVE to P ARK or REVERSE (or from P or R to D) should be done only after the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake when moving the shift lever between these gears.
W ARNING! • Never use the P ARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • It is dangerous to move the shift lever out of P ARK or NEUTRAL if the engine speed is higher than the idle speed.
• The O/D OFF switch has not been activated. • V ehicle speed is above approximately 30 mph (48 km/h). When frequent transmission shifting occurs while using Overdrive, such as when operating the .
second time restor es the Overdrive function. The lockout feature is useful when towing a trailer or carrying a heavy load. 2 (Second) This range is used for moderate grades and to assist braking on dry pavement or in mud and snow . The vehicle begins from a stop in low gear with automatic upshift to 2nd gear .
T orque Converter Clutch A feature designed to improve fuel economy has been added to the automatic transmission of this vehicle. A clutch within the tor que converter engages automatically at calibrated speeds. This may result in a slightly dif fer- ent feeling or r esponse during normal operation in high gear .
rear wheels to rotate at the same speed. This is accom- plished by simply moving the shift lever to one of these positions. The 4H and 4L positions ar e intended for loose, slippery road surfaces only and not intended for normal driving.
W ARNING! Y ou or others could be injured if you leave the vehicle unattended with the transfer case in the N (Neutral) position without first fully engaging the parking brake.
4L Position This range locks the front and rear driveshafts together , forcing the front and rear wheels to r otate at the same speed. This range (4L) provides additional traction and maximum pulling power for loose, slippery road surfaces only . Do not exceed 25 mph (40 km/h).
W ARNING! Failure to engage a position completely can cause transfer case damage or loss of power and vehicle control. Y ou could have an injury accident.
AXLE LOCK (TRU–LOK™) — RUBICON MODELS The AXLE LOCK switch is located on the lower switch bank (below the climate controls). This feature will only activate when the following con- ditions are met: • Key in ignition, vehicle in 4L (Low) range.
REAR AXLE LOCK (FOUR-WHEEL DRIVE NON-RUBICON MODELS) — IF EQUIPPED The REAR AXLE LOCK switch is located on the lower switch bank (below the climate controls). This feature will only activate when the following con- ditions are met: • Key in ignition, vehicle in 4L (Low) range.
This system is controlled by the SW A Y BAR switch located on the lower switch bank (below the climate controls). Press the SW A Y BAR switch to activate the system. Press the switch again to deactivate the system. The “Sway Bar Indicator Light” (located in the instrument cluster) will illuminate when the bar is disconnected.
T o disconnect the stabilizer/sway bar , shift to either 4H or 4L (refer to “Four-Wheel Drive Operation” in this section) and press the SW A Y BAR switch to obtain the off-r oad position. The “Sway Bar Indicator Light” will flash until the stabilizer/sway bar has been fully discon- nected.
An advantage of the higher gr ound clearance is a better view of the r oad, allowing you to anticipate problems. They are not designed for cornering at the same speeds as conventional two-wheel drive vehicles any more than low-slung sports cars are designed to perform satisfacto- rily in of f-road conditions.
3. Remove the side step assembly . The Basics of Off-Road Driving Y ou will encounter many types of terrain driving off- road. Y ou should be familiar with the terrain and ar ea before pr oceeding. There are many types of surface conditions: hard-packed dirt, gravel, rocks, grass, sand, mud, snow and ice.
W ARNING! Always wear your seat belt and firmly tie down cargo. Unsecured cargo can become projectiles in an off-road situation. When to Use 4L (Low) Range When off-r oad driving, shift into 4L (Low) for additional traction and control on slippery or difficult terrain, ascending or descending steep hills, and to incr ease low speed pulling power .
CAUTION! On icy or slippery roads, do not downshift at high engine RPM or vehicle speeds, because engine brak- ing may cause skidding and loss of control. Mud Deep mud creates a great deal of suction around the tires and is very difficult to get thr ough.
CAUTION! Reduced tire pressures may cause tire unseating and total loss of air pressure. T o reduce the risk of tire unseating, while at a reduced tire pressure, reduce your speed and avoid sharp turns or abrupt maneu- vers. Crossing Obstacles (Rocks and Other High Points) While driving off-r oad, you will encounter many types of terrain.
Crossing Large Rocks When appr oaching large rocks, choose a path which ensures you drive over the largest of them with your tires. This will lift your undercarriage over the obstacle. The tread of the tir e is tougher and thicker than the side wall and is designed to take the abuse.
on top of the log while the other just starts to climb the log. While climbing the log, modulate your brake and accelerator to avoid spinning the log out fr om under your tires.
Before Climbing A Steep Hill As you approach a hill, consider its grade or steepness. Determine if it is too steep. Look to see what the traction is on the hill side trail.
Driving Downhill Before driving down a steep hill, you need to determine if it is too steep for a safe descent. What is the surface traction? Is the grade too steep to maintain a slow , controlled des.
engine braking to control the descent and apply your brakes, if necessary , but do not allow the tires to lock. W ARNING! If the engine stalls or you lose headway or cannot make it to the top of a steep hill or grade, never attempt to turn around. T o do so may result in tipping and rolling the vehicle, which may result in severe injury .
CAUTION! • W ater ingestion into the axles, transmission, trans- fer case, engine or vehicle interior can occur if you drive too fast or through too deep of water . W ater can cause permanent damage to engine, driveline or other vehicle components, and your brakes will be less effective once wet and/or muddy .
CAUTION! Muddy waters can reduce the cooling system effec- tiveness by depositing debris onto the radiator . Crossing Ditches, Streams, Shallow Rivers or Other Flowing W ater Flowing water can be extremely dangerous. Never at- tempt to cross a fast running stream or river even in shallow water .
After Driving Off-Road Off-r oad operation puts more str ess on your vehicle than does most on-road driving. After going off-road, it is always a good idea to check for damage. That way you can get any pr oblems taken care of right away and have your vehicle ready when you need it.
• If you experience unusual vibration after driving in mud, slush or similar conditions, check the wheels for impacted material. Impacted material can cause a wheel imbalance and freeing the wheels of it will correct the situation.
Power Steering Fluid Check Checking the power steering fluid level at a defined service interval is not requir ed. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated.
P ARKING BRAKE NOTE: This vehicle is not equipped with a self- adjusting parking brake system. Refer to the “Mainte- nance Schedule” in Section 8 of this manual for the proper maintenance intervals. T o set the parking brake, pull the lever up as firmly as possible.
W ARNING! • Always fully apply the parking brake when leav- ing your vehicle, or it may roll and cause damage or injury . Also, be certain to leave an automatic transmission in P ARK, a manual transmission in REVERSE or 1st gear . Failure to do so may allow the vehicle to roll and cause damage or injury .
The Anti-Lock Brake System conducts a low speed self- test at about 12 mph (20 km/h). If for any reason your foot is on the brake when the vehicle reaches 12 mph (20 km/h), this check will be delayed until 25 mph (40 km/h).
W ARNING! (Continued) • The capabilities of an ABS-equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopardize the user’s safety or the safety of others.
W ARNING! The Anti-Lock Brake System (ABS) cannot prevent the natural laws of physics from acting on the ve- hicle, nor can they increase the traction afforded by prevailing road conditions. The ABS cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
benefit of the system, you must apply continuous brak- ing pressure during the stopping sequence. Do not reduce brake pedal pressure unless braking is no longer desired.
W ARNING! If the clutch pedal (manual transmission only) re- mains pressed during the application of the throttle, the HSA will disengage allowing the vehicle to roll down the incline.
HSA on Automatic T ransmission V ehicles The system will work in REVERSE, and all forward gears on vehicles equipped with an automatic transmission. The system will not activate if the vehicle is placed in NEUTRAL.
W ARNING! (Continued) • HSA is not a parking brake. If you stop the vehicle on a hill without putting the transmission in P ARK and using the parking brake, it will roll down the hill and could cause a collision with another vehicle or object.
speed of the vehicle. When ERM determines that the rate of change of the steering wheel angle and vehicle’s speed are sufficient to potentially cause wheel lift, it applies the appropriate brake and may reduce engine power to lessen the chance that wheel lift will occur .
counteracting the over/under steer condition. Engine power may also be reduced to help the vehicle maintain the desired path. ESP uses sensors in the vehicle to determine the vehicle path intended by the driver and compares it to the actual path of the vehicle.
The ESP system has three available operating modes in 4H range. The system has one operating mode in 4L range. T wo-wheel drive vehicles and four-wheel drive vehicles in 2H range have two operating modes. 4H Range (4WD Models) or 2WD Models On This is the normal operating mode for ESP in 4H and 2WD vehicles.
NOTE: T o improve the vehicle’s traction when driving with snow chains, or starting off in deep snow , sand, or gravel, it may be desirable to switch to the “Partial Off” mode by pr essing the ESP OFF switch.
W ARNING! W ith the ESP switched off, the enhanced vehicle stability offered by ESP and ERM are unavailable. In an emergency evasive maneuver , the ESP and ERM systems will not engage to assist in maintaining stability . The “Full Off” ESP mode is intended for off-road use only .
W ARNING! W ith the ESP switched off, the enhanced vehicle stability offered by ESP and ERM are unavailable. In an emergency evasive maneuver , the ESP and ERM systems will not engage to assist in maintaining stability . The “Full Off” mode is intended for off- road use only .
The following procedure will disable (or re-enable) ESP functionality in the vehicle: 1. Shift the transfer case into the 4H range position. 2. T urn the steering wheel until it is centered and the wheels are pointed straight ahead. 3. Cycle the ignition key OFF to ON.
If the “ESP/BAS W arning Light” comes on continuously with the engine running, a malfunction has been detected in either the ESP or the BAS system, or both.
W ARNING! If TSC activates while driving, slow the vehicle down, stop at the nearest safe location, and adjust the trailer load to eliminate trailer sway .
NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on Eur opean design standards.
T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger Car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger Car tire based on Eur opean design standards LT = Light T ruck tire based on U.
EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can ca.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Tire Loading and T ire Pressure T ire Placard Location T ire Placard Location (T wo-Door Models) T ire Placard Location (Four -Door Models) 5 ST ARTING AND OPERA TING 335 I n f o r m a t i o n P r o v.
T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pr essures for the fr ont, rear , and spare tir es.
Steps for Determining Correct Load Limit 1. Locate the statement “The combined weight of occu- pants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
338 ST ARTING AND OPERA TING I n f o r m a t i o n P r o v i d e d b y :.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
Economy Improper inflation pressur es can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will r educe tr ead life r esulting in a need for earlier tire replacement. Under-inflation also increases tire rolling resistance and results in higher fuel consumption.
T ire pressur e should be checked and adjusted as well as inspected for signs of tir e wear or visible damage, at least once a month. Use a good quality pocket-type gauge to check tire pressur e. Do not make a visual judgement when determining pr oper inflation.
T ire pressur es change by appr oximately 1 psi (7 kPa) per 12° F (7° C) of air temperature change. Keep this in mind when checking tire pressur e inside a garage, especially in the W inter .
Radial-Ply Tires W ARNING! Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle poorly . The instability could cause an accident. Al- ways use radial tires in sets of four . Never combine them with other types of tires.
T read Wear Indicators T r ead wear indicators are in the original equipment tires to help you in determining when your tires should be re- placed. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm).
Keep unmounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease and gasoline. Replacement Tires The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tir e inflation pressur e.
W ARNING! (Continued) • Failure to equip your vehicle with tires having adequate speed capability can result in sudden tire failure and loss of vehicle control. CAUTION! Replacing original tires with tires of a different size may result in false speedometer and odometer read- ings.
TIRE ROT A TION RECOMMENDA TIONS T ires on the front and rear axles of vehicles operate at differ ent loads and perform different steering, handling, and braking functions. For these reasons, they wear at unequal rates, and develop irregular wear patterns.
when the outside temperature decr eases, the tire pr essure will decrease. T ire pressur e should always be set based on cold inflation tire pr essure. This is defined as the tire pressur e after a vehicle has not been driven for more than three hours, or driven less than 1 mile (1.
30 psi (207 kPa), but the “T ire Pr essure Monitoring T elltale Light” will still be ON. In this situation, the “T ire Pressur e Monitoring T elltale Light” will turn OFF only after the tires have been inflated to the vehicle’s recom- mended cold placard pr essure value.
• The TPMS is not a substitute for pr oper tir e mainte- nance, and it is the driver ’s responsibility to maintain correct tire pressur e, even if under-inflation has not reached the level to trigger illumination of the “T ir e Pressur e Monitoring T elltale Light.
each tire to the vehicle’s r ecommended cold placard pressur e value. The system will automatically update and the “T ire Pressure Monitoring T elltale Light” will extinguish once the updated tire pressures have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) to receive this information.
NOTE: If your vehicle is not equipped with a matching full-size spare wheel and tir e assembly , it does not have a tire pressure monitoring sensor in the spar e tire.
FUEL REQUIREMENTS All engines ar e designed to meet all emis- sions regulations and provide excellent fuel economy and performance when us- ing high quality unleaded “regular” gaso- line having an octane rating of 87. The use of premium gasoline is not r ecommended, as it will not provide any benefit over r egular gasoline in these engines.
Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxy- genates such as 10% ethanol, MTBE, and ETBE. Oxygen- ates ar e requir ed in some areas of the country during the winter months to reduce carbon monoxide emissions. Fuels blended with these oxygenates may be used in your vehicle.
• disconnect and reconnect the battery to reset the engine controller memory More extensive repairs will be requir ed for prolonged exposure to E-85 fuel. MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase the octane num- ber .
Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gasoline is prohibited by Federal law . Using leaded gasoline can impair engine perfor- mance, and damage the emission control system.
stopped in an open area with the engine running for more than a short period, adjust the ventilation system to force fr esh, outside air into the vehicle. • Guard against carbon monoxide with proper mainte- nance. Have the exhaust system inspected every time the vehicle is raised.
sound is heard. This is an indication that the gas cap is properly tightened. Press the odometer reset button to turn the message off. If the pr oblem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap.
W ARNING! A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. Y ou could be burned. Always place gas containers on the ground while filling.
Each axle’s GA WR is determined by the components in the system with the lowest load carrying capacity (axle, springs, tires, or wheels). Heavier axles or suspension components, sometimes specified by pur chasers for in- creased durability , does not necessarily increase the ve- hicle’s GVWR.
the front or rear axles has been exceeded, but the total load is within the specified GVWR. If so, weight must be shifted from front to rear , or r ear to fr ont, as appr opriate until the specified weight limitations are met. Store the heavier items down low and be sur e that the weight is distributed equally .
Gross T railer W eight (GTW) The GTW is the weight of the trailer plus the weight of all cargo, consumables and equipment (permanent or tem- porary) loaded in or on the trailer in its ⬙ loaded and ready for operation ⬙ condition. The recommended way to measure GTW is to put your fully-loaded trailer on a vehicle scale.
tongue. It typically provides adjustable friction associ- ated with the telescoping motion to dampen any un- wanted trailer swaying motions while traveling. W eight-Carrying Hitch A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the vehicle.
T railer Hitch Classification The following chart pr ovides the industry standar d for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition.
T railer T owing W eights (Maximum T railer W eight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ T ransmis- sion Axle Model GCWR (Gross Combined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.
Engine/ T ransmis- sion Axle Model GCWR (Gross Combined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T railer T ongue Wt. (See Note) 3.8L/ Manual 3.73 2–Door Sahara Model (4WD) 6,231 lbs (2 826 kg) 25 sq ft (2.32 sq m) 2,000 lbs (907 kg) 200 lbs (91 kg) 3.
Engine/ T ransmis- sion Axle Model GCWR (Gross Combined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T railer T ongue Wt. (See Note) 3.8L/ Automatic 3.73 4–Door X Model (2WD) 7,734 lbs (3 508 kg) 32 sq ft (2.97 sq m) 3,500 lbs (1 587 kg) 350 lbs (159 kg) 3.
Engine/ T ransmis- sion Axle Model GCWR (Gross Combined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T railer T ongue Wt. (See Note) 3.8L/ Manual 3.21 4–Door Sahara Model (4WD) 5,625 lbs (2 551 kg) 32 sq ft (2.97 sq m) 1,000 lbs (453 kg) 100 lbs (45 kg) 3.
Engine/ T ransmis- sion Axle Model GCWR (Gross Combined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T railer T ongue Wt. (See Note) 3.8L/ Automatic 4.10 4–Door Rubicon Model (4WD) 8,249 lbs (3 742 kg) 32 sq ft (2.97 sq m) 3,500 lbs (1 587 kg) 350 lbs (159 kg) Refer to local laws for maximum trailer towing speeds.
T railer and T railer T ongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle.
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle.
• When hauling cargo or towing a trailer , do not over- load your vehicle or trailer . Overloading can cause a loss of control, poor performance or damage to the brakes, axle, engine, transmission, steering, suspen- sion, chassis structur e or tires.
− Proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle. Refer to “T ires–General Information” in this section for proper tire inflation pr ocedures. − Check the trailer tires for proper tire inflation pres- sures befor e trailer usage.
CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity . Failure to do this could lead to accelerated brake lining wear , higher brake pedal effort, and longer stopping distances.
The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector . Refer to the following illustration. T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic.
The automatic transmission fluid and filter should be changed if you REGULARL Y tow a trailer for mor e than 45 minutes of continuous operation. Refer to the “Main- tenance Schedule” in Section 8 of this manual for the proper maintenance intervals.
RECREA TIONAL T OWING (BEHIND MOTORHOME, ETC.) CAUTION! Front or rear wheel lifts should not be used. Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when recreational towing. T owing – T wo-Wheel Drive Models Recreational towing is allowed ONL Y if the rear drive- shaft is removed.
Use the following pr ocedure to prepare your vehicle for recr eational towing. CAUTION! It is necessary to follow these steps to be certain that the transfer case is fully in N (Neutral) before recre- ational towing to prevent damage to internal parts.
CAUTION! Damage to the transmission may occur if the trans- mission is shifted into P ARK with the transfer case in N (Neutral) and the engine running. W ith the trans- fer case in N (Neutral) ensure that the engine is of f prior to shifting the transmission into P ARK (refer to steps 8 – 9 above).
I n f o r m a t i o n P r o v i d e d b y :.
WHA T TO DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................ 3 8 2 䡵 If Y our Engine Overheats ................ 3 8 2 䡵 Jacking And T ire Changing ............... 3 8 3 ▫ Jack Location ....................... 3 8 4 ▫ Spare T ire Stowage .
HAZARD W ARNING FLASHER The Hazard W arning flasher switch is located on the lower switch bank below the climate controls. Press the switch to turn on the Hazard W arning flasher . When the switch is activated, all directional turn signals will flash on and of f to warn oncoming traffic of an emergency .
NOTE: There are steps that you can take to slow down an impending overheat condition: • If your air conditioner (A/C) is on, turn it of f. The A/C system adds heat to the engine cooling system and turning the A/C can help remove this heat.
Jack Location The jack and lug wr ench ar e located in the rear storage compartment. Refer to “Storage” in Section 3 of this manual. Spare Tire Stowage T o remove the spare tire from the carrier , remove the tir e cover , if equipped, and remove the lug nuts with the lug wrench turning them counter clockwise.
2. Set the parking brake. 3. Shift the automatic transmission into P ARK, or a manual transmission into REVERSE. 4. T urn the ignition to LOCK. 5. T urn on the Hazard W arning flasher . 6. Block both the front and rear of the wheel diagonally opposite of the jack- ing position.
W ARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack. • Only use the jack in the positions indicated and for lifting this vehicle during a tire change. • If working on or near a roadway , be extremely careful of motor traffic.
5. Raise the vehicle by turning the jack scr ew to the right. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tir e. Minimum tire lift pr ovides maximum stability . W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable and cause an accident.
wheel nut tightness is 95 ft lbs (130 N·m). If in doubt about the correct tightness, have them checked with a torque wrench by your authorized dealer or at a service station. 10. Remove the jack assembly and wheel blocks. W ARNING! A loose tire or jack, thrown forward in a collision or hard stop, could endanger the occupants of the ve- hicle.
1. Remove all metal jewelry such as watch bands or bracelets which might make an unintended electrical contact. 2. Park the booster vehicle within cable reach but with- out letting the vehicles touch.
W ARNING! Any procedure other than above could result in: • Personal injury caused by electrolyte squirting out the battery vent. • Personal injury or property damage due to battery explosion. • Damage to the charging system of the booster vehicle or of the immobilized vehicle.
EMERGENCY T OW HOOKS — IF EQUIPPED If your vehicle is equipped with tow hooks, they are mounted in the front and the r ear . CAUTION! T ow hooks are for emergency use only , to rescue a vehicle stranded off road. Do not use tow hooks for tow truck hookup or highway towing.
I n f o r m a t i o n P r o v i d e d b y :.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment – 3.8L .............. 3 9 5 䡵 Onboard Diagnostic System — OBD II ...... 3 9 6 ▫ Loose Fuel Filler Cap Message ........... 3 9 6 䡵 Emissions Inspection And Maintenance Programs .......
▫ Brake System ....................... 4 1 5 ▫ Automatic T ransmission — If Equipped .... 4 1 7 ▫ Hydraulic Clutch Fluid — Manual T ransmission ....................... 4 2 0 ▫ Manual T ransmission — If Equipped ...... 4 2 0 ▫ T ransfer Case — If Equipped .
ENGINE COMP ARTMENT – 3.8L 1 — Integrated Power Module 7 — W asher Fluid Reservoir 2 — Battery 8 — Engine Coolant Reservoir 3 — Automatic T ransmission Dipstick 9 — Air Cleaner Filter 4 .
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
gas cap is properly tightened. Pr ess the odometer reset button to turn the message off. If the problem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the pr ob- lem is detected twice in a row , the system will turn on the “Malfunction Indicator Light.
5. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station.
your vehicle. Refer to these manuals before attempting any procedur e yourself. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. W ARNING! Y ou can be badly injured working on or around a motor vehicle.
CAUTION! (Continued) • Y our vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air condi- tioning.
Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to the “Maintenance Schedule” in Section 8 for information on this system. NOTE: Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or six months, whichever occurs first.
Engine Oil V iscosity (SAE Grade) SAE 5W -20 engine oil is recommended for all operating temperatures. This engine oil impr oves low temperature starting and vehicle fuel economy . The engine oil filler cap also shows the recommended engine oil viscosity for your engine.
Engine Oil Filter Selection All of the manufacturer’s engines have a full-flow type disposable oil filter . Use a filter of this type for replace- ment. The quality of replacement filters varies consider- ably . Only high quality filters should be used to assur e most efficient service.
CAUTION! It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked (+) positive and negative (-) and are identified on the battery case.
W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs.
attention should also be given to hood latching compo- nents to ensure proper function. When performing other underhood services, the hood latch, r elease mechanism and safety catch should be cleaned and lubricated. The external lock cylinders should be lubricated twice a year , preferably in the Fall and Spring.
some washer fluid and apply it to a cloth or towel and wipe clean the wiper blades; this will help blade perfor - mance. T o pr event freeze-up of your windshield washer system in cold weather , select a solution or mixture that meets or exceeds the temperatur e range of your climate.
CAUTION! The catalytic converter requires the use of unleaded fuel only . Leaded gasoline will destroy the effective- ness of the catalyst as an emissions control device and may seriously reduce engine performance and cause serious damage to the engine.
W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn.
Cooling System W ARNING! Y ou or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator . If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator or coolant bottle is hot.
Cooling System — Drain, Flush, and Refill If the engine coolant (antifreeze) is dirty and contains a considerable amount of sediment, clean and flush with reliable cooling system cleaner . Follow with a thor ough rinsing to remove all deposits and chemicals.
CAUTION! (Continued) • This vehicle has not been designed for use with Propylene Glycol based engine coolant (anti- freeze). Use of Propylene Glycol base engine cool- ant (antifreeze) is not recommended. Adding Engine Coolant Y our vehicle has been built with an improved engine coolant (antifreeze) that allows extended maintenance intervals.
NOTE: Mixing engine coolant (antifr eeze) types will decrease the life of the engine coolant (antifreeze) and will require more frequent engine coolant (antifreeze) changes.
to r emain in puddles on the gr ound. If ingested by a child or pet, seek emergency assistance immediately . Clean up any ground spills immediately . Engine Coolant Level The coolant bottle provides a quick visual method for determining that the coolant level is adequate.
• Check the engine coolant (antifr eeze) fr eeze point in the radiator and in the coolant r ecovery bottle. If engine coolant (antifreeze) needs to be added, the contents of the coolant recovery bottle must also be protected against fr eezing.
W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear , and possible brake damage. Y ou would not have your full braking capacity in an emergency .
W ARNING! (Continued) • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. • Use only brake fluid that has been in a tightly closed container (both as to bottles and the master cylinder remaining covered) to avoid contamina- tion from foreign matter or moisture.
CAUTION! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder . Using a transmission fluid other than the manufacturer’s recommended fluid will result in more frequent fluid and filter changes.
adding any quantity of oil through the dipstick tube, wait a minimum of two minutes for the oil to fully drain into the transmission before r echecking the fluid level.
CAUTION! Do not use chemical flushes in your transmission as the chemicals can damage your transmission compo- nents. Such damage is not covered by the New V ehicle Limited W arranty . Hydraulic Clutch Fluid — Manual T ransmission The clutch hydraulic system is a sealed maintenance-free system.
Adding Fluid Fluid should be added only at filler hole until fluid begins to run out of the hole. Drain First remove the fill plug (B), then the drain plug (C). The recommended tightening torque for the drain and fill plugs is 15 to 25 ft lbs (20 to 34 N·m).
Selection of Lubricant Use only manufacturer’s recommended fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type.
corrosive to the metal in your vehicle. Outside parking, which exposes your vehicle to airborne contaminants, road surfaces on which the vehicle is operated, extreme hot or cold weather and other extreme conditions will have an adverse effect on paint, metal trim, and under- body protection.
• A void using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish. CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder , which will scratch metal and painted surfaces.
• Use MOP AR 威 T ouch-Up Paint or equivalent on scratches or chips as soon as possible. Y our authorized dealer has touch-up paint to match the color of your vehicle. Wheel and Wheel T rim Care All wheels and wheel trim, especially aluminum and chrome-plated wheels, should be cleaned regularly with a mild soap and water to pr event corrosion.
Interior Care Use MOP AR 威 T otal Clean or equivalent to clean fabric upholstery and carpeting. Interior T rim should be cleaned starting with a damp cloth, a damp cloth with MOP AR 威 T otal Clean or equiva- lent, then MOP AR 威 Spot & Stain Remover or equivalent if absolutely necessary .
Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, car e must be taken to avoid scratching the plastic. 1. Clean with a wet, soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners.
• Be especially car eful when washing the windows by following the directions for “Care of Fabric T op W indows.” W ASHING — Use MOP AR 威 Car W ash or mild soap suds, lukewarm water , and a brush with soft bristles.
Care of Fabric T op W indows CAUTION! Y our vehicle’s fabric top has pliable plastic windows which can be scratched unless special care is taken by following these directions: 1.
experienced, work the MOP AR 威 Soft T op Zipper Cleaner and Lubricant into the zipper slide. Several applications may be requir ed before the zipper comes fr ee. 6. Never paste stickers, gummed labels or any tape to the windows. Adhesives are hard to remove and may dam- age the windows.
Cavity Cartridge Fuse Mini Fuse Description J4 25 Amp Natural Driver Door Node J5 25 Amp Natural Passenger Door Node J6 40 Amp Green Anti-Lock Brake System (ABS) Pump Feed/ESP J7 30 Amp Pink Anti-Lock.
Cavity Cartridge Fuse Mini Fuse Description M1 15 Amp Blue Center High-Mounted Stop Light (CHMSL)/ Switch Stop Lamp Feed M2 20 Amp Y ellow Relay T railer Lighting (Stop) M3 20 Amp Y ellow Frt/Rear Axl.
Cavity Cartridge Fuse Mini Fuse Description M13 20 Amp Y ellow Ignition Off Draw— Cabin Compartment Node (IOD-CCN), W ireless Control Mod- ule (WCM), SIREN, Multifunction Control Switch (MUL TIFCTN .
Cavity Cartridge Fuse Mini Fuse Description M16 10 Amp Red Occupant Restraint Controller (ORC) M17 15 Amp Blue Left T ail/License/Park Lamp (L T -T AIL/LIC/ PRK LMP) M18 15 Amp Blue Right T ail/Park/R.
Cavity Cartridge Fuse Mini Fuse Description M30 15 Amp Blue W iper Motor Frt, J1962 Diagnostic Feed M31 20 Amp Y ellow Backup Lamps (B/U LAMPS) M32 10 Amp Red Occupant Restraint Controller (ORC), TT E.
CAUTION! • When installing the Integrated Power Module cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in an electrical system failure.
REPLACEMENT BULBS — IF EQUIPPED Interior Lamps Bulb T ype Auto. T rans. Indicator Lamp ................. 6 5 8 Heater Control Lamps (2) ................... 1 9 4 Rocker Switch Indicator Lamp (Rear W indow Defogger , and Rear W ash/W ipe) ...........
4. T urn both park and turn signal socket assemblies 1/4 turn counterclockwise and r emove. 5. Remove the four screws holding the metal retaining ring. 6. Remove the lamp from the collar . 7. Grasp the bulb and turn 1/4 turn counterclockwise. 8. Pull the bulb from the housing.
Front Side Marker 1. Reach under the front fender flare and locate the front side marker socket. 2. T urn the socket assembly counterclockwise 1/3 turn and r emove it fr om the housing. Pull the bulb straight from the socket to r eplace. Front Fog Lamp 1.
3. Rotate the appropriate socket 1/4 turn counterclock- wise, then remove it fr om the housing. 4. Pull the bulb straight from the socket to replace. Center High-Mounted Stop Lamp (CHMSL) The stop lamp is mounted on a bracket that extends upward from the tailgate behind the spare tire.
FLUID CAP ACITIES U.S. Metric Fuel (Approximate) — 2 Door Models 18.5 Gallons 70 Liters Fuel (Approximate) — 4 Door Models 22.5 Gallons 85 Liters Engine Oil with Filter 3.
FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology) Engine Oil Use API Certified SAE 5W -20 Engine Oil, meeting the r equirements of Chrysler Material Standard MS-6395.
Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission MOP AR 威 A TF+4 Automatic T ransmission Fluid Manual T ransmission MOP AR 威 Manual T ransmission Lubricant or equivalent (meeting the re- quirements of Chrysler Material Standar d MS-9224).
I n f o r m a t i o n P r o v i d e d b y :.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 4 4 6 䡵 Maintenance Schedule .................. 4 4 6 ▫ Required Maintenance Intervals .
EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued pr oper functioning of the emissions control system.
• Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or six months, which- ever comes first. Y our dealer will reset the oil change indicator message after completing the scheduled oil change.
• Check all lights and other electrical items for correct operation. At Each Oil Change • Change the engine oil filter . • Inspect the brake hoses and lines. • Check the manual transmission fluid level. CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle.
6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the front & rear axle fluid, change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing.
30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter .
36,000 Miles (60,000 km) or 36 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter , replace if necessary .
48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter , replace if necessary .
60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter .
66,000 Miles (1 10,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter .
96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter , replace if necessary .
108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter , replace if necessary .
120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace accessory drive belt(s). ❏ Inspect the brake linings, replace if necessary .
126,000 Miles (210,000 km) or 126 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the front & rear axle fluid, change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing.
138,000 Miles (230,000 km) or 138 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
150,000 Miles (250,000 km) or 150 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter .
† This maintenance is r ecommended by the manufacturer to the owner , but is not required to maintain emissions warranty . W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 4 6 7 ▫ Prepar e For The Appointment ........... 4 6 7 ▫ Prepar e A List ...................... 4 6 7 ▫ Be Reasonable W ith Requests .
䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 4 7 3 ▫ T readwear ......................... 4 7 3 ▫ T raction Grades .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty .
This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- ship.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center .
W e appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you ar e absolutely delighted with the ownership experience. Y ou’ll be pleased with their sincere efforts to r esolve any warranty issues or related concerns.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer , and the manufacturer .
These comprehensive Service Manuals provide the information that students and professional technicians need in diagnosing/troubleshooting, pr oblem solving, maintaining, servicing, and repairing Chrysler LLC vehicles.
DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tir e grading categories were established by the National Highway T raffic Safety Administration. The specific grade rating assigned by the tir e’s manufactur er in each category is shown on the sidewall of the tires on your vehicle.
T emperature Grades The temperature grades are A (the highest), B, and C, repr esenting the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10 I n f o r m a t i o n P r o v i d e d b y :.
ABS (Anti-Lock Brake System) ............ 203,314 Adding Fuel ........................... 3 5 7 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 403 Air Conditioner Maintenance ............... 4 0 4 Air Conditioning ..................... 264,268 Air Conditioning Controls .
Battery ............................... 4 0 3 Emergency Starting ..................... 3 8 8 Keyless T ransmitter Replacement (RKE) ....... 2 3 Belts, Seat ............................ 39,74 Body Mechanism Lubrication ............... 4 0 5 Brake Assist System .
Child Seat .............................. 6 4 Climate Control ......................... 2 6 2 Clock ........................ 218,232,236,245 Compact Disc (CD) Maintenance ............. 2 6 1 Compass .............................. 2 1 2 Compass Calibration .
Disposal Engine Oil ........................... 4 0 2 Used Coolant (Antifreeze) ................ 4 1 3 Door Locks ............................. 3 0 Doors ................................. 2 6 Driver’s Seat Back T ilt ..................... 8 5 Driving .
Fuel Requirements .................. 353,441 Jump Starting ......................... 3 8 8 O i l .............................. 400,441 Oil Disposal .......................... 4 0 2 Oil Filter ............................ 4 0 2 Oil Selection .........
Fog Lights ........................... 95,439 Fold and T umble Rear Seat .................. 8 8 Folding Rear Seat ........................ 9 1 Folding W indshield ...................... 1 8 5 Four Wheel Drive ....................... 2 8 9 Shifting ...
Hard T op, Modular ...................... 1 1 4 Hard T op Removal ....................... 1 1 8 Hazard W arning Flasher ................... 3 8 2 Head Restraints .......................... 8 7 Head Rests ............................. 8 7 Headlights Bulb Replacement .
Jacking Instructions ...................... 3 8 5 Jump Starting .......................... 3 8 8 Key , Programming ........................ 1 6 Key , Replacement ........................ 1 5 Key , Sentry (Immobilizer) ................... 1 4 Key-In Reminder .
Exterior .............................. 7 5 F o g .............................. 95,439 Hazard W arning Flasher ................. 3 8 2 Headlight Switch ....................... 9 4 Headlights ........................... 4 3 7 High Beam ...............
Maintenance Schedule .................... 4 4 6 Malfunction Indicator Light (Check Engine) . . 209,397 Manual, Service ......................... 4 7 1 Manual T ransmission .................. 279,420 Fluid Level Check ..................... 4 2 0 Lubricant Selection .
Operator Manual (Owner’s Manual) ............ 6 Outside Rearview Mirrors .................. 8 2 Overheating, Engine ................... 205,382 Owner’s Manual (Operator Manual) ......... 6,471 Paint Care ............................. 4 2 2 Paint Damage .
Refrigerant ............................ 4 0 5 Release, Hood ........................... 9 3 Reminder , Lights On ...................... 9 5 Reminder , Seat Belt ....................... 4 6 Remote Control Door Locks ........................... 1 9 Remote Keyless Entry (RKE) .
Seats ................................. 8 3 Adjustment ........................... 8 3 Easy Entry ............................ 8 5 Fold and T umble Rear ................... 8 8 Head Restraints ........................ 8 7 Height Adjustment ...........
Cold W eather ......................... 2 7 6 Engine Block Heater .................... 2 7 9 Engine Fails to Start .................... 2 7 6 Manual T ransmission ................... 2 7 5 Remote .............................. 2 4 Steering Power .....
Load Capacity ..................... 335,336 Pressur e Monitor System (TPMS) ........... 3 4 7 Pressur e W arning Light .................. 2 0 6 Quality Grading ....................... 4 7 3 Radial .............................. 3 4 3 Replacement .....
Maintenance ....................... 417,420 Manual ............................. 2 7 9 Range Indicator ....................... 2 0 6 Shifting ............................. 2 8 3 T ransmitter Battery Service (Remote Keyless Entry) .................... 2 3 T ransporting Pets .
W indshield, Folding ...................... 1 8 5 W indshield W ashers .................... 98,406 Fluid ............................... 4 0 6 W indshield W iper Blades .................. 4 0 6 W indshield W ipers ....................... 9 8 W iper , Rear .
INST ALLA TION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed pr operly by trained person- nel.
I n f o r m a t i o n P r o v i d e d b y :.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Jeep Wrangler (2009) c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Jeep Wrangler (2009) - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Jeep Wrangler (2009), vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Jeep Wrangler (2009) va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Jeep Wrangler (2009), mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Jeep Wrangler (2009).
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Jeep Wrangler (2009). Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Jeep Wrangler (2009) ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
