Manuel d'utilisation / d'entretien du produit Commander (2006) du fabricant Jeep
Aller à la page of 440
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................. 1 1 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ..........
I n f o r m a t i o n P r o v i d e d b y :.
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 ▫ Roll Over W arning ..................... 5 䡵 How T o Use This Manual .................. 7 䡵 W arnings And Cautions ................... 7 䡵 V ehicle Identification Number ..
INTRODUCTION Thank you for selecting a Jeep 威 Commander and wel- come to our worldwide family . This is a specialized utility vehicle designed for both on-road and off-road use. It can go places and perform tasks for which conventional two-wheel drive vehicles were not intended.
Roll Over W arning Utility vehicles have a significantly higher roll over rate than other types of vehicles. This vehicle has a higher ground clearance, higher center of gravity , and narrower track than many passenger cars. It is capable of perform- ing better in a wide variety of off-road applications.
Failure to use driver and passenger seat belts provided is a major cause of severe or fatal injury . In fact, the U.S. government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year , and could reduce disabling injuries by 2 million annually .
W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
VEHICLE IDENTIFICA TION NUMBER The vehicle identification number (VIN) is found on a label located on the left front corner of the instrument panel pad, visible fr om outside of the vehicle through the windshield. This number also appears on the Automobile Information Disclosure Label affixed to a window on your vehicle.
VEHICLE MODIFICA TIONS / AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
I n f o r m a t i o n P r o v i d e d b y :.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys .................. 1 4 ▫ Ignition Key .......................... 1 4 ▫ Key-In-Ignition Reminder ................ 1 5 䡵 Sentry Key Immobilizer System ............
▫ T ransmitter Battery Service ............... 2 4 䡵 Security Alarm System — If Equipped ......... 2 5 ▫ T o S e t T h e A l a r m ...................... 2 6 ▫ T o Disarm The System ................... 2 6 䡵 Liftgate ......................
䡵 Safety T ips ............................ 6 9 ▫ Exhaust Gas .......................... 6 9 ▫ Safety Checks Y ou Should Make Inside The V e h i c l e .............................. 7 0 ▫ Safety Checks Y ou Should Make Outside The V e h i c l e .
A WORD ABOUT YOUR KEYS The keys for your new vehicle are enclosed in a plastic bag with the key code number on it. If you received your keys without the bag, ask your authorized dealer to give you the number . The key code can also be obtained by your authorized dealer from your vehicle invoice.
Key-In-Ignition Reminder If the driver’s door is opened when the key is in the ignition and not turned to the ON position, a chime will sound to remind you to remove the key . CAUTION! Always remove the key from the ignition, and lock all doors when leaving the vehicle unattended.
If the SKIM indicator light comes on during normal vehicle operation (it has been running for longer than 10 seconds) a fault has been detected in the electronics and the vehicle should be serviced as soon as possible. NOTE: • The Sentry Key Immobilizer System is not compatible with remote starting systems.
consists of programming a blank key to the vehicle electronics. A blank key is one which has never been programmed. NOTE: When having the Sentry Key System serviced, bring all vehicle keys to the dealer . Customer Key Programming Y ou can program new keys to the system if you have two valid keys by doing the following: 1.
2. This device must accept any interference that may be received, including interference that may cause undes- ired operation. ILLUMINA TED ENTR Y The interior lights come on when you open any door . They will remain on for about 30 seconds after all doors are closed then fade to off.
CAUTION! An unlocked vehicle is an invitation to thieves. Always remove the key from the ignition and lock all of the doors when leaving the vehicle unattended. Child Protection Locks The rear doors of your vehicle are equipped with child protection locks.
Power Door Locks A door lock switch is on each front door panel. Press this switch to lock or unlock the doors. If the plunger is down when the door is closed, the door will lock. Ther efore, make sur e the keys ar e not inside the vehicle before closing the door .
Automatic Unlock on Exit Feature — Only A vailable if Auto Lock is Enabled This feature will unlock all the doors when the driver’s door is opened if the vehicle is stopped and in P (Park) or N (Neutral).
NOTE: If desired, the system can be programmed to unlock all doors on the first press of the “Unlock” button. Refer to “Remote Unlock Driver’s Door 1st” in the Personal Settings section of the “Electronic V ehicle Infor- mation Center (EVIC)”, or simply follow these steps: 1.
W ARNING! Driving with the flipper glass open can allow poi- sonous exhaust gases into your vehicle. Y ou and your passengers could be injured by these fumes.
2. While the “Unlock” button is pressed, (after 4 seconds) press the “Lock” button. Release both buttons. The “Flash Lights On Lock/Unlock” feature can be reactivated by repeating this procedure. General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada.
2. Remove and replace the battery . A void touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 3. T o reassemble the transmitter case, join the two halves of the case together .
T o Set the Alarm The alarm will set when you use the r emote keyless entry transmitter to lock the doors and liftgate or when you use the power door lock switch while the door is open.
LIFTGA TE T o open the liftgate, pull up (squeeze) on the handle and lift. Manually unlocking the vehicle doors with the plunger or a key in the lock cylinder will not unlock the liftgate. W ARNING! Driving with the liftgate open can allow poisonous exhaust gases into your vehicle.
Liftgate Flipper Glass The liftgate flipper glass is also unlocked when the liftgate is unlocked. T o open the flipper glass, push up on the window switch located on the liftgate. W ARNING! T o avoid injury stand back when opening. Glass will automatically rise.
POWER WINDOWS The power window controls are located on the driver’s door trim panel. There is a single switch on the front passenger door/rear doors which operates the fr ont passenger/rear passenger door windows. The window controls will operate only when the ignition switch is in the ON or ACCESSORY position.
Auto Down Both the driver and front passenger window switch has an “Auto Down” feature. Press the window switch past the first detent, release, and the window will go down automatically . T o cancel the “Auto Down” movement, operate the switch in either the up or down dir ection and release the switch.
W ARNING! There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closing. Resetting the Auto-Up Feature Should the Auto-Up feature stop working the window probably needs to be reset.
open or partially open positions. This is a normal occur- rence and can be minimized. If the buffeting occurs with the sunr oof open, adjust the sunr oof opening to minimize the buffeting. OCCUP ANT RESTRAINTS Some of the most important safety featur es in your vehicle are the restraint systems.
Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown from the vehicle. Seat belts reduce the possibility of ejection and the risk of injury caused by striking the inside of the vehicle.
Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the seat. 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap.
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries.
4. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap portion, pull up a bit on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision.
6. T o release the belt, push the red button marked PRESS on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow it to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection.
As a guide, if you are shorter than average, you will prefer a lower position, and if you are taller than average, you’ll prefer a higher position. When you release the anchorage, try to move it up or down to make sure that it is locked in position.
This safety belt system has a retractor assembly that is designed to release webbing in a controlled manner . This feature is designed to help reduce the belt force acting on the occupant’s chest.
Enhanced Seat Belt Use Reminder System (BeltAlert) If the driver or front passenger seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph (8 km/h), the Enhanced W arning System (BeltAlert) will alert the driver or front passenger to buckle their seat belt.
The Enhanced W arning System (BeltAlert) can be reacti- vated by repeating this procedure. NOTE: Although the Enhanced W arning System (BeltAlert) has been deactivated, the Seat Belt W arning Light will continue to illuminate while the driver or fr ont passenger seat belt remains unfastened.
Driver And Front Passenger Supplemental Restraint Systems (SRS) This vehicle has airbags for both the driver and right front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the steering wheel. The passenger side airbag is mounted in the instrument panel, above the glove compartment.
This vehicle also is equipped with window bags to protect the driver , front, and rear passengers sitting next to a window . They are located above the side windows. Their covers are also labeled SRS/AIRBAG. NOTE: Airbag covers may not be obvious in the interior trim; but they will open to allow airbag deployment.
The front airbags have a multi stage inflator design. This allows the airbag to have different rates of inflation that are based on collision severity . Along with the seat belts, front airbags work with the instrument panel knee bol- sters to provide improved protection for the driver and front passenger .
Children that are not big enough to properly wear the vehicle seat belt should be secured in the rear seat, in a child restraint or belt-positioning booster seat. Older children who do not use child restraints or belt- positioning booster seats should ride properly buckled up in the rear seat.
W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly . In some collisions the airbags won’t deploy at all. Always wear your seat belts even though you have airbags.
• Driver and Front Passenger Seat Belt Pretensioner • Occupant Classification System (OCS) — Front Pas- senger Seat Only − Occupant Classification Module − Passenger Airbag Disable (P AD) In.
W ARNING! Ignoring the “Airbag W arning Light” in your instru- ment panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have the airbag system checked right away .
The “P AD Indicator Light” should not be illuminated when teenagers, most children in a forward-facing child restraint or booster seats, most children that can properly wear the vehicle’s seat belt, and when an adult passenger is properly seated in the front passen- ger seat.
Front Passenger Seat Occupant Passenger Air- bag Disable (P AD) Indicator Light Airbag Status Adult OFF ON Grocery Bags, Heavy Briefcases and Other Rela- tively Light Ob- jects ON OFF Empty or V ery Small Objects OFF* OFF * Since the system senses weight, some small objects will turn the P AD Indicator Light on.
because this can also affect occupant classification. Also, if you fold down the rear seat check to be sure it doesn’t touch the front passenger seat. If the front passenger seat is damaged in any way , it should only be serviced by an authorized dealer .
The driver front airbag gas is vented through the vent holes in the sides of the airbag. The passenger front airbag gas is vented thr ough the vent holes in the sides of the airbag. In this way , the airbags do not interfere with your control of the vehicle.
The front passenger seat assembly contains critical com- ponents that affect the front passenger airbag deploy- ment. Correctly functioning front passenger seat compo- nents are critical for the Occupant Classification System (OCS) to properly classify the front passenger and calcu- late the proper airbag deployment.
W ARNING! Unapproved modifications or service procedures to the front passenger seat assembly , its related compo- nents, or seat cover may inadvertently change the airbag deployment in case of a frontal crash. This could result in death or serious injury to the front seat passenger if the vehicle is involved in an acci- dent.
• As the airbags deflate you may see some smoke-like particles. The particles are a normal by-product of the process that generates the nontoxic gas used for airbag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water .
Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured if the airbag system is not there to protect you.
with other data gathered during a complete accident investigation, the electronic data may be used by DaimlerChrysler Corporation and others to learn more about the possible causes of crashes and associated injuries in order to assess and improve vehicle perfor- mance.
Data Parameters that May Be Recorded: • Diagnostic trouble code(s) and warning lamp status for electronically-contr olled safety systems, including the airbag system • Airbag disable lamp status (.
W ARNING! In a collision, an unrestrained child, even a tiny baby , can become a missile inside the vehicle. The force required to hold even an infant on your lap can become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured.
W ARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint.
belt tight, however , any seat belt system will loosen with time, so check the belt occasionally and pull it tight if necessary). For the second and third row seat belts with the automatic locking ret.
Older Children and Child Restraints Children who weigh more than 20 lbs (9 kg) and who are older than one year can ride forward-facing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing direction, are for chil- dren who weigh 20 to 40 lbs (9 to 18 kg), and who are older than one year .
LA TCH — Child Seat Anchorage System (Lower Anchors and T ether for CH ildren) Y our vehicle’s second r ow seat is equipped with the child restraint anchorage system called LA TCH.
The second row outboard seating positions have lower anchorages that are capable of accommodating LA TCH- compatible child seats having flexible, webbing-mounted lower attachments. Child seats with fixed lower attach- ments must be installed in the outboard positions only .
In addition, there ar e tether strap anchorages behind each rear outboard seating position located on the back of the seat. Many , but not all restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjusting the tension in the strap.
hook for attachment to the tether strap anchorage and a means of adjusting the tension of the strap. Y ou will first loosen the adjusters on the lower straps and on the tether strap so that you can more easily attach the hooks or connectors to the vehicle anchorages.
If the seat belt has a automatic locking retractor , it will have a distinctive label. Pull the belt from the retractor until there is enough to allow you to pass through the child restraint and slide the latch plate into the buckle. Then, pull the belt until it is all extracted from the retractor .
Route the tether strap over the seat back and attach the hook to the tether anchor located on the back of the seat. For the outboard seating positions, route the tether over the head rests, and attach the hook to the tether anchor located on the back of the seat.
The engine oil installed in the engine at the factory is a high quality energy conserving type lubricant. Oil changes should be consistent with anticipated climate conditions under which vehicle operations will occur . The r ecommended viscosity and quality grades are shown in Section 7 of this manual.
• Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for a extended period.
Defrosters Check operation by selecting the defrost mode and place the blower control on high speed. Y ou should feel the air directed against the windshield. Safety Checks Y ou Should Make Outside The V ehicle T ires Examine tires for excessive tread wear or uneven wear patterns.
I n f o r m a t i o n P r o v i d e d b y :.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 M i r r o r s ............................... 7 8 ▫ Inside Day/Night Mirror ................. 7 8 ▫ Inside Automatic Dimming Mirror — If Equipped .......................... 7 9 ▫ Exterior Mirrors Folding Feature .
▫ Front Seat Adjustment — Recline .......... 1 0 6 ▫ Manual Lumbar Support Adjustment ....... 1 0 6 ▫ Head Restraints ...................... 1 0 7 ▫ 8 - W ay Driver’s Power Seat .............. 1 0 8 ▫ 4 - W ay Passenger’s Power Seat — If Equipped .
▫ Lights-On Reminder ................... 1 2 5 ▫ Fog Lights — If Equipped ............... 1 2 6 ▫ T urn Signals ......................... 1 2 6 ▫ High Beam Switch .................... 1 2 6 ▫ Passing Light ........................ 1 2 6 ▫ Headlight T ime Delay .
䡵 Electronic Speed Control .................. 1 4 8 ▫ T o Activate .......................... 1 4 9 ▫ T o Set At a Desired Speed ............... 1 4 9 ▫ T o Deactivate ........................ 1 4 9 ▫ T o Resume Speed ..................... 1 4 9 ▫ T o V ary The Speed Setting .
▫ Sunroof Fully Closed ................... 1 6 1 䡵 Command-V iew™ Skylights — If Equipped .... 1 6 1 䡵 Power Outlet .......................... 1 6 2 䡵 Cup Holders .......................... 1 6 4 䡵 Cargo Area Features ...................
MIRRORS Inside Day/Night Mirror The mirror should be adjusted to center on the view through the rear window . A two-point pivot system allows for horizontal and vertical adjustment of the mirror . The mirror should be adjusted while set in the day position (toward windshield).
Inside Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for annoying headlight glare from vehicles behind you. Y ou can turn the feature on or off by pressing the button at the base of the mirror . A light next to the button will indicate when the dimming feature is activated.
Exterior Mirrors Folding Feature All exterior mirrors are hinged and may be moved either forward or rearwar d to resist damage. The hinges have three detent positions; full forward, full rearwar d, and normal.
Power Remote Control Outside Mirrors The power mirror switch is located on the driver’s door trim panel next to the power door lock switch. A rotary knob selects the left mirror , right mirror , or off position. After selecting a mirror move the knob in the same direction you want the mirror to move.
Lighted V anity Mirrors — If Equipped T o access a lighted vanity mirror , flip down one of the visors. Lift the cover to reveal the mirror . The light will turn on automatically . Sun V isor Extension This feature has a pull out extension on the sun visor for increased coverage.
UConnect™ allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle, and enables you to mute the system’s micro- phone for private conversation. The UConnect™ phonebook enables you to stor e up to 32 names and four numbers per name.
The UConnect™ system can be used with any Hands- Free Profile certified Bluetooth™ cellular phone. See www .chrysler .com/uconnect for supported phones. If your cellular phone supports a differ ent profile (e.g., Headset Profile), you may not be able to use any UCon- nect™ features.
example, you can either use the combined form voice command ⬙ Phonebook New Entry , ⬙ or you can break the combined form command into two voice com- mands: ⬙ Phonebook ⬙ and ⬙ New Entry .
NOTE: • www .chrysler .com/uconnect • www .dodge.com/uconnect • www .jeep.com/uconnect The following are general phone to UConnect™ System pairing instructions: • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing.
phones are present in the vehicle, the UConnect™ system will use the priority 3 cellular phone when you make a call. Y ou can select to use a lower priority cellular phone at any time (refer to ⬙ Advanced Phone Connectivity ⬙ ). Dial by Saying a Number • Press the ’Phone’ button to begin.
• After the ⬙ Ready ⬙ prompt and the following beep, say the name of the person you want to call. For example, you can say ⬙ John Doe, ⬙ where John Doe is a previ- ously stored name entry in the UConnect™ phone- book. Refer to ⬙ Add Names to Y our UConnect™ Phonebook, ⬙ to learn how to store a name in the phonebook.
four associated phone numbers and designations. Each language has a separate 32 name phonebook accessible only in that language. Edit Entries in the UConnect™ Phonebook NOTE: Editing phonebook entries is recommended when vehicle is not in motion. • Press the ’Phone’ button to begin.
• After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete. Y ou can either say the name of a phonebook entry that you wish to delete or you can say ⬙ List Names ⬙ to hear a list of the entries in the phonebook from which you choose.
• T o call one of the names in the list, press the ⬙ V oice Recognition’ button during the playing of the desired name and say ⬙ Call. ⬙ NOTE: the user can also exercise ⬙ Edit ⬙ or ⬙ Delete ⬙ operations at this point. • The UConnect™ system will then prompt you as to number designation you wish to call.
Making a Second Call while Current Call in Progress T o make a second call while you are currently in a call, press the ’V oice Recognition’ button and say ⬙ Dial ⬙ or ⬙ Call ⬙ followed by the phone number or phonebook entry you wish to call.
Call T ermination T o end a call in progr ess, momentarily press the ⬘ Phone’ button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. Redial • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Redial.
• After the ⬙ Ready ⬙ prompt and the following beep, say the name of the language you wish to switch to (English, Espanol, or Francais, if so equipped). • Continue to follow the system prompts to complete language selection. After selecting one of the languages, all prompts and voice commands will be in that language.
Y our phone must be turned on and paired to the UCon- nect™ system to allow use of this vehicle feature in emergency situations when the cell phone has network coverage and stays paired to the UConnect™ system. T owing Assistance If you need towing assistance, • Press the ’Phone’ button to begin.
When calling a number with your UConnect™ system that normally r equires you to enter in a touch-tone sequence on your cellular phone keypad, you can push the ’V oice Recognition’ button and say the sequence you wish to enter followed by the word ⬙ Send.
Dialing Using the Cellular Phone Keypad Y ou can dial a phone number with your cellular phone keypad and still use the UConnect™ system (while dialing via the cell phone keypad, the user must exercise caution and take precautionary safety measures).
Information Service When using A T&T W ireless Service, dialing to phone number ⬙ #121, ⬙ you can access voice activated automated system to receive news, weather , stocks, traffic, etc.
Select another Cellular Phone This feature allows you to select and start using another phone with the UConnect™ system. The phone must have been previously paired to the UConnect™ system that you want to use it with. • Press the ’Phone’ button to begin.
Things Y ou Should Know About Y our UConnect™ System V oice Recognition (VR) • Always wait for the beep before speaking. • Speak normally , without pausing, just as you would speak to a person sitting approximately eight (8) feet away from you. • Make sur e that no one other than you is speaking during a voice recognition period.
• Y ou can say ⬙ O ⬙ (letter ⬙ O ⬙ ) for ⬙ 0 ⬙ (zero). ⬙ 800 ⬙ must be spoken ⬙ eight-zero-zer o. ⬙ • Even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported.
102 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 103 3 I n f o r m a t i o n P r o v i d e d b y :.
104 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
North American English Primary Alternate(s) Zero Oh Add location Add new All All of them Confirmation prompts Confirmations prompts Delete a name Delete Language Select language List names List all List paired phones List phones Pager Beeper Phone pairing Pairing Phonebook Phone book Return to main menu Return.
Front Seat Adjustment — Recline T o adjust the seatback, lift the lever located on the outboard side of the seat, lean back, and release the lever at the desired position. T o return the seatback, lift the lever , lean forward, and release the lever .
Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear . Adjustable head restraints should be adjusted so that the upper edge is as high as practical. The head restraints have a locking button which must be pushed in to lower the head restraint to all positions.
8 - W ay Driver’s Power Seat The driver’s power seat switches are located on the outboard side of the driver’s seat lower side trim. The bottom switch controls up/down, forwar d/rearward, and tilt adjustment. The top switch controls the seatback recline adjustment.
indicate the level of heat in use. T wo LEDs are illumi- nated for high, one for low , and none for off. Pr essing the switch once will select high-level heating. Pressing the switch a second time will select low-level heating. Pressing the switch a third time will shut the heating elements off.
1. Pull up on the seatback lever located on the outboard side of the seat. NOTE: Also, pulling upward on this handle allows the outboard seating positions to be reclined. 2. Fold the seatback down, and tumble the seat forward. W ARNING! Do not drive the vehicle with the outer second row seats in the tumbled position.
NOTE: If sitting in the third row seat, pull rearward on the r elease strap located at the r ear of the seat and tumble the seat forward. Fold and T umble Seat Release Strap UNDERST ANDING THE FEA TUR.
Folding Middle Seatback (Second Row Seat) 1. Pull the release strap. 2. Lower the center seatback. Center Seat Armrest (Second Row Seat) — If Equipped The second row center seat may be equipped with a armrest.
50/50 Third Row Folding Seat T o Lower Rear Seat Either side of the third row seat can be lowered to allow for extended cargo space, and still maintain some rear seating room. 1. Open the tailgate. 2. Push the seatback r elease handle (towar d rear of vehicle), and lower the seatback using the pull strap.
T o Raise Rear Seat 1. Open the tailgate. 2. Detach pull strap from back of seat, and pull seatback upward until it locks into place. Reattach strap. 3.
Y our vehicle may have been delivered with two Remote Keyless Entry transmitters. One or both transmitters can be linked to either memory position. The memory system can accommodate up to four transmitters, each one linked to either of the two memory positions.
5. T urn on the radio and set the radio station presets (up to 10 AM and 10 FM stations can be set). 6. T urn the ignition switch to the OFF position and remove the key . 7. Press and release the SET (S) button located on the driver’s door . 8. W ithin 5 seconds, press and release memory button 1 or 2 on the driver’s door .
T o recall the memory settings for driver one, press memory button number 1 on the driver’s door or the “Unlock” button on the Remote Keyless Entry transmit- ter linked to memory position 1.
NOTE: Once programmed, all transmitters linked to memory can be easily enabled or disabled at one time. Refer to Remote Linked to Memory under ⬙ Electronic V ehicle Information Center (EVIC) — Customer Pro- grammable Features ⬙ in Section 4 for more information.
NOTE: The Easy Entry Easy Exit feature is not enabled when the vehicle is delivered from the factory . The Easy Entry Easy Exit feature is enabled (or later disabled) through the programmable features in the Electronic V ehicle Information Center (EVIC).
Then, reach under the hood, move safety latch to the left, and lift the hood. T o prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center of the hood to ensure that both latches engage. W ARNING! If the hood is not fully latched, it could fly up when the vehicle is moving and block your forward vision.
Courtesy/Reading Lights Each light can be turned on by pressing the recessed area of the lens. T o turn these lights of f, press the r ecessed area of the lens a second time. There are also reading lights located above the rear doors. Each light can be turned on by pressing the front recessed area of the lens.
Multi-Function Control Lever The multi-function control lever controls the operation of the headlights, turn signals, headlight beam selection, instrument panel light dimming, passing light, interior courtesy/dome lights, and optional fog lights.
Automatic Headlight System — If Equipped T urn the end of the multi-function control lever to the third detent to activate the automatic headlight system.
NOTE: When your headlights come on during the daytime, the instrument panel lights will automatically dim to the lower nighttime intensity . Refer to “Instru- ment Panel and Interior Lights” below for setting the instrument panel lights to full daytime intensity .
headlights to remain on longer (closer to the vehicle). Also, dirt, film, and other obstructions (sticker , toll box, etc.) on the windshield or camera lens will cause the system to function improperly .
Fog Lights — If Equipped The fog light switch is located in the multi- function control lever . T o activate the fog lights, turn on the park/turn lights, low beam headlights, or “Auto” headlights and pull out the end of the multi- function control lever .
Headlight Time Delay There is also a feature that delays turning off the vehicle lights for 30, 60, or 90 seconds after the ignition switch is turned OFF . T o activate the headlight delay , the multi- function control lever must be rotated to the “Off” position after the ignition switch is turned OFF .
T o use the washer , pull the lever toward you and hold while spray is desired. If the lever is pulled while in the delay range, the wiper will operate for several seconds after the lever is released, and then resume the intermit- tent interval previously selected.
Rain Sensing Wipers—If Equipped This feature senses moistur e on the windshield and automatically activates the wipers for the driver . The feature is especially useful for road splash or overspray from the windshield washers of the vehicle ahead. Rotate the end of the multi-function lever to one of five settings to activate this feature.
driver desires more sensitivity . Place the wiper switch in the OFF position when not using the system. NOTE: • The rain sensing feature will not operate when the wiper switch is in the LOW or HIGH speed position. • The rain sensing feature may not function properly when ice, or dried salt water is present on the wind- shield.
TIL T STEERING COLUMN T o tilt the column, push down on the lever below the turn signal control and move the wheel up or down, as desired. Pull the lever back towards you and firmly push the lever until it is above the lower surface of the shroud to lock the column in place.
ABS (Anti-Lock Brake System) This system aids the driver in maintaining vehicle control under adverse braking conditions. The system controls hydraulic brake pressur e to prevent wheel lock-up and help avoid skidding on slippery surfaces during braking.
TCS (T raction Control System) This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressur e is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability .
W ARNING! BAS (Brake Assist System) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. BAS cannot prevent accidents, in- cluding those resulting from excessive speed in turns, driving on very slippery surfaces, or hydro- planing.
NOTE: Anytime the ESP system is in the “Full Off” mode, ERM is disabled. Refer to ESP (Electronic Stability Program) for a complete explanation of the available ESP modes. W ARNING! Many factors, such as vehicle loading, road condi- tions and driving conditions, influence the chance that wheel lift or rollover may occur .
• Understeer - when the vehicle is turning less than appropriate for the steering wheel position. The ⬙ ESP/TCS Indicator Light ⬙ located in the instrument cluster , starts to flash as soon as the tir es lose traction and the ESP system becomes active.
High Range (4WD Models) or 2WD Models On This is the normal operating mode for ESP in 4WD high range and in 2WD vehicles. Whenever the vehicle is started or the transfer case (if equipped) is shifted from 4WD low range or neutral back to 4WD high range, the ESP system will be in this mode.
NOTE: T o improve the vehicle’s traction when driving with snow chains, or starting off in deep snow , sand, or gravel, it may be desirable to switch to the “Partial Off” mode by pressing the ESP switch.
W ARNING! W ith the ESP switched off, the enhanced vehicle stability offered by ESP and ERM are unavailable. In an emergency evasive maneuver , the ESP and ERM systems will not engage to assist in maintaining stability . The “Full Off” ESP mode is intended for off-highway or off-road use only .
Electronic V ehicle Information Center (EVIC). Refer to “Electronic V ehicle Information Center (EVIC)” in Sec- tion 4 of this manual. (See page 186 for more informa- tion.) T o turn ESP on again, momentarily depress the “ESP Control Switch”. This will restore the normal “Par- tial Off” mode of operation in 4wd low range.
If the “ESP/BAS W arning Lamp” comes on continuously with the engine running, a mal- function has been detected in either the ESP or the BAS system, or both.
Rear Park Assist Sensors The four Rear Park Assist Sensors, located in the rear fascia, monitor the area behind the vehicle that is within the sensors’ field of view . The monitored area seems oval in shape. The sensors can detect obstacles from approximately 1 1.
When the obstacle is detected at a distance of about 59 inches (150 cm) from the rear fascia, the outermost LEDs of the warning display will be ON with increased bright- ness. Along with the LED, a half second tone will occur . As the distance of the detected obstacle to the rear fascia decreases, mor e LEDs ar e illuminated.
Enable/Disable the Rear Park Assist System The Rear Park Assist System can be enabled and disabled with a switch located in the switch bank of the instru- ment panel. When the switch is pressed to disable the system, the instrument cluster will display the ⬙ P ARK ASSIST DIS- ABLED ⬙ message.
Service the Rear Park Assist System When the Rear Park Assist System is defective, the instrument cluster will actuate a single chime, once per ignition cycle, and it will display the ⬙ SER VICE P ARK ASSIST SYSTEM ⬙ message. Refer to “Electronic V ehicle Information Center (EVIC)” in Section 4 of this manual.
W ARNING! • Drivers must be careful when backing up even when using the Rear Park Assist System. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before back- ing up.
ADJUST ABLE PEDALS — IF EQUIPPED This feature allows both the brake and accelerator pedals to move toward the driver to provide improved position with the steering wheel. The adjustable pedal system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position.
• The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in R (Reverse) or when the Speed Contr ol is ON. A message will be displayed in the Electronic V ehi.
T o Activate Press the ON·OFF button to turn the system ON. T o turn the system OFF , press the ON·OFF button again. The system should be turned OFF when not in use. The CRUISE indicator light in the instrument cluster will illuminate when the system is ON.
T o V ary the Speed Setting When the Speed Control is ON, speed can be increased by pressing and holding the RES·ACCEL button. When the button is released, a new set speed will be estab- lished. T apping the RES·ACCEL button once will result in a 2 mph (3 km/h) (3.
W ARNING! Leaving the Speed Control ON when not in use is dangerous. Y ou could accidentally set the system or cause it to go faster than you want. Y ou could lose control and have an accident.
OVERHEAD CONSOLE — IF EQUIPPED The overhead console contains an optional universal garage door opener (HomeLink 威 ), storage for sunglasses, and optional power sunroof switches.
W ARNING! A moving garage door can cause injury to people and pets in the path of the door . People or pets could be seriously or fatally injured. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by federal safety stan- dards.
Programming HomeLink NOTE: When programming a garage door opener , it is advised to park outside the garage. It is also recom- mended that a new battery be placed in the hand-held transmitter of the device being pr ogrammed to HomeLink for quicker training and accurate transmis- sion of the radio-frequency signal.
2. Position the end of your hand-held transmitter 1-3 inches (3-8 cm) away from the HomeLink buttons. 3. Simultaneously press and hold both the HomeLink button that you want to train and the hand-held trans- mitter buttons. Do not release the buttons until step 4 has been completed.
NOTE: T o program the remaining two HomeLink but- tons, begin with ⬙ Programming ⬙ step two. Do not repeat step one. NOTE: If your hand-held transmitter appears to pro- gram the universal transcei.
Canadian Programming/Gate Programming Canadian radio-frequency laws require transmitter sig- nals to ⬙ time-out ⬙ (or quit) after several seconds of transmission which may not be long enough for HomeLink to pick up the signal during programming. Similar to this Canadian law , some U.
• Press and hold the two outer HomeLink buttons and release only when the EVIC display shows “CHAN- NELS CLEARED” (after 20 seconds). Release both buttons. Do not hold for longer that 30 seconds. HomeLink is now in the train (or learning) mode and can be programmed at any time beginning with ⬙ Pro- gramming ⬙ - Step 2.
HomeLink 威 is a trademark owned by Johnson Controls, Inc. POWER SUNROOF — IF EQUIPPED The power sunroof switch is located on the overhead console. W ARNING! • Never leave children in a vehicle, with the keys in the ignition switch.
Opening Sunroof - Express Press the switch rearward and release, and the sunroof will open automatically from any position. The sunroof will open fully , then stop automatically . This is called Express Open. During Express Open operation, any movement of the sunroof switch will stop the sunroof.
Sunshade Operation The sunshade can be opened manually . However , the sunshade will open automatically as the sunroof opens. NOTE: The sunshade cannot be closed if the sunroof is open. Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter type sound in the ears.
NOTE: Hold onto shade handle until shade is com- pletely open or closed. POWER OUTLET T o the right of the convenience tray (lower center of instrument panel) is an outlet for electrically powered accessories. Pull lightly on the tab of the plastic cover to access the outlet.
The rear power outlet (if equipped) is located in the left rear cargo area. The power outlets are a direct feed from the battery so they receive power whether the ignition is in the ON or OFF position. All accessories connected to this outlet should be re- moved or turned off when the vehicle is not in use to protect the battery against discharge.
CAUTION! Electrical Outlet Use W ith Engine Off • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e., cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting.
NOTE: The cup holder insert is removable, from the console, for cleaning. It can be reinstalled with the larger cup depression towards the passenger seat, but the top surface will not be flush with the console surface. Cup Holders (Second Row Seat) The second row seat has two cup holders in the center armrest.
Cup Holders (Third Row Seat) The third row seat passengers have cup holders on the left and right rear trim panels. CARGO AREA FEA TURES Cargo Load Floor The panel in the load floor is reversible for added utility . One side is carpeted and the other side features a plastic lined tray which holds a variety of items.
NOTE: The cargo load floor latches should not be used as cargo tie-downs. 1. Flip up pull loop(s) so they ar e perpendicular (straight up) to the top surface of the tray . 2. Pull up on loop(s) and twist 90 degrees, so they are parallel to the slotted hole in tray .
5. Push loop(s) back down, so they are parallel to the top of the tray . REAR WINDOW FEA TURES Rear Window Wiper/W asher A switch on the right side of the steering column controls operation of the rear wiper/washer function. Rotating the center of the switch up to the DEL (Delay) position or the ON position will activate the wiper .
the rear wiper switch or the ignition switch needs to be turned OFF and ON to restart the rear wiper . Adding W asher Fluid The fluid reservoir for the windshield washers and the rear window washer is shared. It is located in the front of the engine compartment on the passenger side and should be checked for fluid level at regular intervals.
NOTE: If the rear cross rail (or any metallic object) is placed over the satellite radio antenna (if equipped), you may experience interruption of satellite radio reception. For improved satellite radio reception, place the rear cross rail in detent position #4 when not in use.
W ARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the roof rack “Cautions” when carrying cargo on your roof rack.
I n f o r m a t i o n P r o v i d e d b y :.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel And Interior Controls ....... 1 7 6 䡵 Instrument Cluster ...................... 1 7 7 䡵 Instrument Cluster Description ............. 1 7 8 䡵 Electronic V ehicle Information Center — If Equipped .
▫ Operation Instructions - (CD Mode For CD Audio Play) ........... 2 0 6 ▫ Load/Eject Button (CD Mode For CD Audio Play) ........... 2 0 8 ▫ Notes On Playing MP3 Files ............. 2 1 0 ▫ Operation Instructions - (CD Mode For MP3 Audio Play) .
▫ Selecting Satellite Mode In REF Radios ...... 2 2 7 ▫ Selecting Satellite Mode In RAQ Radios ..... 2 2 7 ▫ Selecting a Channel .................... 2 2 8 ▫ Storing And Selecting Pre-Set Channels ...... 2 2 8 ▫ Using The PTY (Program T ype) Button — If Equipped .
INSTRUMENT P ANEL AND INTERIOR CONTROLS 176 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :.
INSTRUMENT CLUSTER UNDERST ANDING YOUR INSTRUMENT P ANEL 177 4 I n f o r m a t i o n P r o v i d e d b y :.
INSTRUMENT CLUSTER DESCRIPTION 1. Speedometer Indicates vehicle speed. 2. Brake W arning Light The BRAKE warning light will come on when the ignition is first turned on, and stay on briefly as a bulb check. If the bulb does not come on during starting, have the bulb re- paired promptly .
engine start. If the bulb does not come on when turning the key from OFF to ON, have the condition checked promptly . Certain conditions such as a loose or missing gas cap, poor fuel quality , etc. may illuminate the light after engine start. The vehicle should be serviced if the light stays on through several of your typical driving cycles.
If the ABS light is on, the brake system should be serviced as soon as possible to restor e the benefits of Anti-Lock brakes. If the ABS light does not turn on when the Ignition switch is turned to the ON position, have the light inspected by an authorized dealer .
prevailing road conditions. The “ESP/TCS Indicator Light” will flash any time the ESP or TCS is active and helping to improve vehicle stability . If the “ESP/TCS Indicator Light” is on solid, the ESP system has been turned off by the driver or a temporary condition exists that will not allow full ESP function.
13. T emperature Gauge The temperature gauge shows engine coolant tempera- ture. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily . The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather , up mountain grades, or when towing a trailer .
14. Electronic V ehicle Information Center Display When the appropriate conditions exist, this display shows the Electronic V ehicle Information Center (EVIC) messages. Refer to “Electronic V ehicle Information Cen- ter” later in this section. (See page 186 for more informa- tion.
or remain on continuously . Refer to ⬙ Enhanced Driver Seat Belt Reminder System (BeltAlert) ⬙ in the Occupant Restraints section for more information. 19. Cruise Indicator Light This indicator lights when the speed control system is turned ON. 20.
when the engine is running, immediate service is re- quired and you may experience reduced performance, an elevated/rough idle or engine stall and your vehicle may requir e towing. The light will come on when the ignition is first turned on and remain on briefly as a bulb check.
ELECTRONIC VEHICLE INFORMA TION CENTER — IF EQUIPPED The electronic vehicle information center (EVIC) located in the instrument cluster , when the appropriate condi- tions exist, will display the following messages and symbols. Some of the messages are accompanied by a chime.
• LIFTGA TE/DOOR OPEN (with graphic) • LIFTGA TE/DOORS OPEN (with graphic) • LIFTGLASS OPEN (with graphic) • HOOD OPEN (with graphic) • HOOD/DOOR OPEN (with graphic) • HOOD/DOORS OPEN (wit.
• CHECK GAS CAP • ESP OFF • MEMOR Y #1 POSITIONS SET • MEMOR Y #2 POSITIONS SET • MEMOR Y SYSTEM DISABLED — SEA TBEL T F AS- TENED (with graphic) • MEMOR Y SYSTEM DISABLED — VEHICLE NO.
Customer Programmable Features Press the MENU button until one of the display choices following appears: Language? When in this display you may select one of three lan- guages for all display nomenclature, including the trip computer functions. Press the STEP button while in this display selects English, Espanol, or Francais.
Display U.S. or Metric? Pressing the STEP button when in this display selects US or Metric. The overhead console and instrument panel displays will be in the selected units. Auto Door Locks? When this feature is selected, all doors and the liftgate lock automatically when the speed of the vehicle reaches 15 mph (25 km/h).
memory set position using the door mounted switch. Pressing the STEP button when in this display will select “Y es” or “No.” Sound Horn W ith Lock? When this feature is selected a short horn sound will occur when the remote keyless entry “Lock” button is pressed.
this display will select “Low Beam” or “Low/High Beam.” Refer to “Lights — SmartBeams” in Section 3 of this manual. NOTE: System will activate at or above 20 mph (32 km/h).
Easy Entry/Exit Seat? (A vailable with Memory Seat Only) This feature provides automatic driver’s seat positioning which will enhance driver mobility out of and into the vehicle. The Easy Entry/ Easy Exit feature is not enabled when the vehicle is delivered fr om the factory .
W ARNING! Even if the display still reads a few degrees above 32°F ( 0°C), the road surface may be icy , particularly in woods or on bridges. Drive carefully under such conditions to prevent an accident and possible per- sonal injury or property damage.
T rip Computer This feature, located in the instrument cluster , displays the following information when the display is in the “Compass/T emperature” mode and the STEP button is pressed: Step Button Press the STEP button to cycle through all of the Compass/Mini-T rip Computer displays.
Reset Button Press the RESET button to reset the display you are in. Press and hold the RESET button (for 2 seconds) to reset all of the displays. A verage Fuel Economy Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will read “RESET” or show dashes for two seconds.
Elapsed T ime Shows the accumulated ignition ON time since the last reset. T ire Pressure Display — If Equipped Shows the current pressure of all 4 road tires. NOTE: T ires heat up during normal driving conditions. Heat will cause the tire pressur e to increase from 2 to 6 psi (14 to 41 kPa) during normal driving conditions.
NOTE: T o ensure proper compass calibration, make sure the compass variance is properly set before manu- ally calibrating the compass. Refer to V ariance Map. T o Put Into a Calibration Mode Start the engine and leave the transmission in the P (Park) position.
T o set the variance: T urn the ignition ON and set the display to “Compass/T emperature.” Press the C/T but- ton for approximately 5 seconds. The last variance zone number will be displayed. Press and hold the STEP button for 1 second to select the new variance zone and press the RESET button to resume normal operation.
T wo T ypes of Signals There are two basic types of radio signals... AM or Amplitude Modulation, in which the transmitted sound causes the amplitude, or height, of the radio waves to vary ... and FM or Frequency Modulation, in which the frequency of the wave is varied to carry the sound.
Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOL control to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio.
SEEK Button (Radio Mode) Press and release the SEEK button to search for the next listenable station in either AM/FM or Satellite (if equipped) mode. Pr ess the right side of the button to seek up and the left side to seek down. The radio will remain tuned to the new station until you make another selec- tion.
2. Adjust the hours by turning the right side T une / Audio control. 3. After the hours are adjusted, press the right side T une / Audio control to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side T une / Audio control.
Press the r otary TUNE control a fifth time and F ADE will display . T urn the TUNE control to the left or right to adjust the sound level between the front and rear speak- ers. Press the rotary TUNE control again to exit setting tone, balance and fade.
Nostalgia Nostalgia Oldies Oldies Personality Personality Public Public Rhythm and Blues Rhythm_and_Blues Religious Music Religious_Music Religious T alk Religious_T alk Rock Rock Soft Soft Soft Rock .
Y ou may add a second station to each push-button by repeating the above procedur e with this exception: Press the SET/DIR button twice and SET 2 will show in the display window .
CAUTION! This CD player will accept 4 3/4 inch (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. Y ou may eject a disc with the radio OFF . If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc.
LOAD/EJECT Button (CD Mode for CD Audio Play) LOAD/ EJECT - Load Press the LOAD/ EJECT button and the push- button with the corresponding number where the CD is being loaded. The radio will display PLEASE W AIT and prompt when to INSER T DISC. After the radio displays ⬙ LOAD DISC ⬙ insert the CD into the player .
TIME Button (CD MODE for CD Audio Play) Press this button to change the display from a large CD playing time display to a small CD playing time display . R W/FF (CD MODE for CD Audio Play) Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or another CD button is pressed.
Notes On Playing MP3 Files The radio can play MP3 files, however , acceptable MP3 file recording media and formats are limited. When writing MP3 files, pay attention to the following restric- tions. Supported Media (Disc T ypes) The MP3 file recor ding media supported by the radio are CD-ROM, CD-R and CD-R W .
Supported MP3 File Formats The radio will recognize only files with the *.mp3 exten- sion as MP3 files. Non-MP3 files named with the *.mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
LOAD / EJECT - Eject Press the LOAD/ EJECT button and the push- button with the corresponding number where the CD was loaded and the disc will unload and move to the entrance for easy r emoval. Radio display will show ⬙ EJECTING DISC ⬙ when the disc is being ejected and prompt the user to remove the disc.
AM/FM Button (CD Mode for MP3 Play) Switches back to Radio mode. RND/ PTY Button (CD Mode for MP3 Play) Pressing this button plays files randomly . SET/DIR Button (CD Mode for MP3 Play) Press the SET/DIR Button to display folders, when playing an MP3 discs that have a file/folder structure.
Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOL control to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio.
SEEK Button (Radio Mode) Press and release the SEEK button to search for the next listenable station in either AM/FM or Satellite (if equipped) mode. Pr ess the right side of the button to seek up and the left side to seek down. The radio will remain tuned to the new station until you make another selec- tion.
2. Adjust the hours by turning the right side T une/ Audio control. 3. After the hours are adjusted, press the right side T une/Audio control to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side T une/Audio control.
Press the r otary TUNE control a fifth time and F ADE will be displayed. T urn the TUNE control to the left or right to adjust the sound level between the front and rear speak- ers. Press the tune control again or wait 5 seconds to exit setting tone, balance, and fade.
Inserting The Compact Disc (Single CD Player) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD Player and the CD icon will illuminate on the radio display . If the volume control is ON, the unit will switch to CD mode and begin to play .
EJECT Button (CD Mode) Press this button and the disc will unload and move to the entrance for easy removal. The unit will switch to the last selected mode. If you do not r emove the disc within 15 seconds, it will be reloaded. The radio mode will continue to appear .
Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device such as an MP3 player , cassette player or microphone and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers.
TIME Button (Auxiliary Mode) Press this button to change the display from elapsed playing time to time of day . The time of day will be displayed for 5 seconds.
Satellite Navigation Radio with CD Player with MP3 Capability (REC) - combines a Global-Positioning System-based navigation system with an integrated color screen to provide maps, turn identification,.
VIDEO ENTERT AINMENT SYSTEM (SALES CODE XRV) — IF EQUIPPED The optional VES™ (V ideo Entertainment System) con- sists of a DVD player and LCD (liquid crystal display) screen, a battery-powered remote control, and two head- sets.
The LCD screen is located on the headliner behind the front seats. Lowering the Display Screen Remote Control Location UNDERST ANDING YOUR INSTRUMENT P ANEL 225 4 I n f o r m a t i o n P r o v i d e d.
SA TELLITE RADIO — IF EQUIPPED Satellite radio uses direct satellite to receiver broadcast- ing technology to provide clear digital sound, coast to coast.
first four digits are displayed. The radio will exit the ESN/SID mode when any other button is pushed, the ignition is turned OFF , or 5 minutes has passed since any button was pushed.
Selecting a Channel Press and release the SEEK or TUNE buttons to sear ch for the next channel. Press the top of the button to search up and the bottom of the button to sear ch down. Holding the TUNE button causes the radio to bypass channels until the button is released.
NOTE: Pr essing the ⬙ SEEK ⬙ or ⬙ SCAN ⬙ button while performing a music type scan will change the channel by one and stop the search. Pressing a pre-set memory button during a music type scan, will call up the memory channel and stop the search.
REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls ar e located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. The right hand control is a rocker type switch with a push-button in the center and controls the volume and mode of the sound system.
The button located in the center of the left hand control will tune to the next preset station that you have pro- grammed in the radio preset push-button.
RADIO OPERA TION AND CELLULAR PHONES Under certain conditions, the cellular phone being On in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio.
Press this button to turn on and off the air condi- tioning. Cool dehumidified air comes through the outlets selected by the mode selector . Press the button a second time to turn off the air conditioning. The button includes an LED that illuminates when compres- sor operation is selected.
T emperature Control The temperature of air can be selected by rotating the center temperature control knob. The coldest temperature setting is on the extreme left and the warmest setting on the extreme right of the rotation. The knob can be posi- tioned at any point on the dial.
Bi-Level Air flows both through the outlets located in the instrument panel and those located on the floor . Air flows through the registers in the back of the center console, and under the front seats to the rear seat passengers. These registers can be closed to partially block airflow .
Operating Tips 236 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :.
Automatic T emperature Control — If Equipped The Infrared Dual-Zone Climate Control System auto- matically maintains the interior comfort level desired by the driver and passenger . This is accomplished by a dual sun-sensor in the top of the instrument panel, and an infrared sensor located in the face of the control unit.
LO AUTO position should be used for front seat occu- pants only . The HI AUTO position should be used when more air flow is desired, or when rear seat occupants are present. Dial in the comfort setting you would like the system to maintain by rotating the driver’s or passenger’s control knob.
NOTE: • The surface of the climate control panel, and the top center of the instrument panel should be kept free of debris due to the climate control sensor’s location.
240 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :.
NOTE: Regardless of the type of operation, when a temperature knob is set to the full clockwise or full counterclockwise position, the system will deliver full hot or full cold air out of the ducts, respectively .
Air flows through the registers in the back of the center console, and under the front seats to the rear seat passengers. These registers can be closed to block airflow . The center console outlets deliver conditioned air while the floor outlets deliver heated air .
This button can be used to block out smoke, odors, dust, high humidity , or if rapid cooling is desired. The recir culation mode should only be used temporarily . The button includes an LED that illuminates, which indicates that the recir cula- tion mode is active.
Rear Mode Control If rear heating/cooling is desir ed, pr ess the “Rear On/Off Switch” (located in the upper switch bank above the controls) and select “Floor” “Bi-Level” or “Panel” from the Rear Control Panel (right knob located on the right rear quarter trim panel).
• Bi-Level Air flows through both the outlets located in the rear quarter trim panels, and the one located on the floor . The rear quarter trim panel outlets can be closed to block airflow . • Panel Air flows through the outlets located in the rear quarter trim panels.
• When the temperature knob is in the cold (Blue) position, cold air will be delivered from the outlets. As the temperature knob is turned towards the hot (Red) position, the air will get warmer .
Window Fogging Interior fogging on the windshield can be quickly re- moved by turning the mode selector to Defrost, and turning on the high blower . The Defrost/Floor mode can be used to maintain a clear windshield and provide sufficient heating. If side window fogging becomes a problem increase blower speed.
I n f o r m a t i o n P r o v i d e d b y :.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es ..................... 2 5 3 ▫ Normal Starting ...................... 2 5 3 ▫ Extreme Cold W eather (Below –20°F (–29°C) . . 254 ▫ If Engine Fails T o Start ................. 2 5 4 ▫ After Starting .
䡵 Anti-Lock Brake System .................. 2 7 1 䡵 Power Steering ........................ 2 7 4 䡵 On-Road Driving T ips ................... 2 7 5 䡵 Off-Road Driving T ips ................... 2 7 6 ▫ When T o Use 4WD Low Range — If Equipped .
䡵 T ire Pressur e Monitor System (TPMS) ........ 2 9 7 ▫ Base System ......................... 2 9 7 ▫ Premium System ...................... 2 9 9 ▫ General Information ................... 3 0 3 䡵 T ire Chains ........................... 3 0 3 䡵 T ire Rotation Recommendations .
▫ T owing – 2WD Models ................. 3 2 3 ▫ T owing — Quadra-T rac I (Single-Speed T ransfer Case) 4WD Models .... 3 2 3 ▫ T owing — Quadra–T rac II /Quadra–Drive II 4WD Models ........................ 3 2 4 䡵 Snow Plow ........
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! Do not leave children or animals inside parked vehicles in hot weather . Interior heat build up may cause serious injury or death.
W ARNING! Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury .
After Starting The idle speed will automatically decrease as the engine warms up. CAUTION! Long periods of engine idling, especially at high engine speeds can cause excessive exhaust tempera- tures which can damage your vehicle. Do not leave your vehicle unattended with the engine running.
TRANSMISSION SHIFTING 5–Speed Automatic T ransmission The electr onically controlled transmission provides a precise shift schedule. The transmission electronics are self-calibrating; therefore, the first few shifts on a new vehicle, may be somewhat abrupt.
W ARNING! It is dangerous to shift the selector lever out of P (Park) or N (Neutral) if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle and hit someone or something.
W ARNING! Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should apply the park brake, shift the transmission into P (Park), and remove the key from the ignition.
shifter is in the D (Drive) position, allowing the selection of the desired top gear . For example, if the driver shifts the transmission into 3 (third gear), the transmission will never shift above third gear , but can shift down to 2 (second) or 1 (first), when needed.
NOTE: If the vehicle is started in extremely cold tem- peratures, the transmission may not shift into Overdrive and will automatically select the most desirable gear for operation at this temperature. Normal operation will resume when the transmission fluid temperature has risen to a suitable level.
overheating or failure due to excessive shifting. When operating in “TOW/HAUL” mode, the transmission will shift to 3rd gear and 4th will be enabled under steady cruise conditions. The “TOW/HAUL” light will illuminate in the instru- ment cluster to indicate when the switch has been activated.
4. W ait approximately 10 seconds, then restart the en- gine. 5. Move the shift lever to the desired gear range. If the problem is no longer detected, the transmission will return to normal operation. If the pr oblem persists, P (Park), R (Reverse), and N (Neutral) will continue to operate.
cause damage to the transmission. The torque converter will refill within five seconds of shifting from Park into any other gear position. Rocking the V ehicle If the vehicle becomes stuck in snow , sand, or mud, it can often be moved by a rocking motion.
FOUR-WHEEL DRIVE OPERA TION Quadra-T rac I 姞 Operating Instructions/Precautions — If Equipped The Quadra-T rac I 威 is a single speed (HI range only) transfer case which provides convenient full-time 4–wheel drive. No driver interaction is requir ed.
road surfaces only . Driving in the 4 LOW position on dry hard surfaced roads may cause increased tire wear and damage to driveline components. When operating your vehicle in 4 LOW , the engine speed is approximately three times that of the 4 HI position at a given road speed.
N (Neutral) Neutral — Disengages both the fr ont and r ear driveshafts from the powertrain. T o be used for flat towing behind another vehicle. Refer to “Recreational T owing” in Sec- tion 5 of this manual. 4 LOW Four Wheel Drive Low Range — Low speed 4 wheel drive.
4L O Wt o4H I W ith the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), key ON or engine running, shift the transmission into N (Neutral), and raise the transfer case T -handle. The “4WD LOW Indicator Lamp” in the instrument cluster will flash and go out when the shift is complete.
Neutral (N) Shift Procedure 1. Key ON, engine off. 2. V ehicle stopped, with foot on brake. 3. Place transmission in N (Neutral). 4. Hold down N (Neutral) “pin” switch (with a pen, etc.) for 4 seconds until the LED lamp by the switch starts to blink indicating shift in pr ogress.
NOTE: If shift conditions/interlocks are not met, a “CHECK SHIFT PROCEDURES” message will flash fr om the EVIC (Electronic V ehicle Information Center). Refer to “Electronic V ehicle Information Center (EVIC)” in Section 4 of this manual. (See page 186 for mor e information.
NOTE: The instrument cluster “Brake W arning Light” indicates only that the parking brake is applied. It does not indicate the degree of brake application. Before leaving the vehicle parked on a hill, you must make sure the parking brake is fully applied and place the gear selector in the P (Park) position.
W ARNING! • Leaving children unattended in a vehicle is dan- gerous for a number of reasons. A child or others could be injured. Children should be warned not to touch the parking brake or the gear selector lever . Don’t leave the keys in the ignition.
W ARNING! Significant over or under inflation of tires, or mixing sizes of tires or wheels on the vehicle can lead to loss of braking effectiveness. The Anti-Lock Brake System conducts a low-speed self- test at about 12 mph (20 km/h). If you have your foot lightly on the brake while this test is occurring you may feel slight pedal movement.
W ARNING! • The Anti-Lock Brake System (ABS) cannot pre- vent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded.
• Do not “ride” the brakes by resting your foot on the pedal. This could overheat the brakes and result in unpredictable braking action, longer stopping dis- tances, or brake damage. • When descending mountains or hills, repeated brak- ing can cause brake fade with loss of braking control.
NOTE: Increased noise levels at the end of the steering wheel travel ar e considered normal and does not indicate that there is a problem with the power steering system. Upon initial start-up in cold weather , the power steering pump may make noise for a short period of time.
conventional 2-wheel drive vehicles any more than low- slung sports cars are designed to perform satisfactorily in off-r oad conditions. If at all possible, avoid sharp turns or abrupt maneuvers. As with other vehicles of this type, failure to operate this vehicle correctly may result in loss of control or vehicle rollover .
caution and maintain a steady controlled speed less than 5 mph (8 km/h) in deep water to minimize wave effects. Flowing W ater If the water is swift flowing and rising (as in storm run-of f) avoid crossing until the water level recedes and/or the flow rate is reduced.
Hill Climbing NOTE: Before attempting to climb a hill, determine the conditions at the crest and/or on the other side. Before climbing a steep hill, shift the transmission to a lower gear and shift the transfer case to 4WD LOW . Use first gear and 4WD LOW for very steep hills.
T raction Downhill Shift the transmission into a low gear and the transfer case to 4WD LOW range. Let the vehicle go slowly down the hill with all four wheels turning against engine compression drag. This will permit you to control the vehicle speed and direction.
W ARNING! Abrasive material in any part of the brakes may cause excessive wear or unpredictable braking. Y ou might not have full braking power when you need it to prevent an accident. If you have been operating your vehicle in dirty conditions, get your brakes checked and cleaned as necessary .
TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger)-Metric tir e sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tire sizing is based on European design standards.
T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ ....blank.... ⴖ = Passenger car tire based on European design standards LT = Light T ruck tire based on U.
EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry . H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire however the date code may only be on one side. T ires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire.
Tire Loading and Tire Pressure T ire Placard Location NOTE: The proper cold tire inflation pressur e is listed on either the face of the driver’s door or the driver’s side “B” pillar .
3) the tire size designed for your vehicle 4) the cold tire inflation pressures for the front, rear and spare tires. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle.
4. The resulting figure equals the available amount of cargo and luggage load capacity . For example, if “XXX” amount equals 1400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available car go and luggage load capacity is 650 lb.
288 ST ARTING AND OPERA TING I n f o r m a t i o n P r o v i d e d b y :.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
2. Economy— Improper inflation pr essures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tr ead life r esulting in a need for earlier tire replacement. Under inflation also increases tire r olling resistance and results in higher fuel consump- tion.
check tire pressur e. Do not make a visual judgement when determining pr oper inflation. Radial tir es may look properly inflated even when they are under inflated. CAUTION! After inspecting or adjusting the tire pressure al- ways reinstall the valve stem cap–if equipped.
Tire Pressures for High Speed Operation The manufactur er advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressur e is very important.
Radial-Ply Tires W ARNING! Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle poorly . The instability could cause an accident. Al- ways use radial tires in sets of four . Never combine them with other types of tires.
T read Wear Indicators T read wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves and will appear as bands when the tread depth becomes 1/16 inch (2 mm).
W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose control and have an accident result- ing in serious injury or death.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combina- tions of unapproved tires and wheels may change suspension dimensions and performance charac- teristics, resulting in changes to steering, han- dling, and braking of your vehicle.
Improper alignment will not cause vehicle vibration. V ibration may be a result of tire and wheel out-of- balance. Proper balancing will reduce vibration and avoid tire cupping and spotty wear .
NOTE: For vehicles with optional wheel/tire sizes and significantly different tire placard pressur es, the placard pressur e value and the low-pr essure threshold value is re-pr ogrammable at your authorized dealer to accommo- date the customer selected wheel/tire combinations rec- ommended by DaimlerChrysler Corporation.
CAUTION! After inspecting or adjusting the tire pressure al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the wheel rim sensor . NOTE: • The TPMS can inform the driver of a low tire pressure condition.
when a system fault is detected. The flash cycle will repeat every ten minutes or until the fault condition is removed and reset. The T ire Pressur e Monitor System (TPMS) consists of the following co.
T elltale Light” will illuminate continuously (solid) and shall remain illuminated until the warning condition is removed/r eset. NOTE: The “T ire Pressure Monitoring T elltale Light” will only illuminate for the four active road tires.
CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equip- ment that is not of the same size, type, and/or style.
General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired op- eration.
TIRE ROT A TION RECOMMENDA TIONS T ires on the front and rear axles of vehicles operate at differ ent loads and perform different steering, handling, and braking functions. For these reasons, they wear at unequal rates, and develop irregular wear patterns.
FUEL REQUIREMENTS 3.7/4.7L Engines (If Equipped) All engines (except 5.7L engines) are de- signed to meet all emissions regulations and provide excellent fuel economy and performance when using high quality un- leaded “regular” gasoline having an oc- tane rating of 87.
Over 40 auto manufacturer’s world wide have issued and endorsed consistent gasoline specifications (the W orld- wide Fuel Charter , WWFC) to define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle.
MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT . Gasoline blended with MMT reduces spark plug life and reduces emission system performance in some vehicles.
• An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may require immediate service.
• Guard against carbon monoxide with proper mainte- nance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repair ed promptly .
CAUTION! Damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impurities into the fuel system. Also, a poorly fitting after- market cap can cause the MIL (Malfunction Indica- tor Light) to illuminate, due to fuel vapors escaping from the system.
Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a “CHECK GAS CAP” message will be displayed in the EVIC (Electronic V ehicle Information Center). Refer to “Electronic V ehicle Information Center” in Section 4 of this manual.
W ARNING! A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. Y ou could be burned. Always place gas containers on the ground while filling. TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle.
Gross Combination W eight Rating (GCWR) The gross combination weight rating (GCWR) is the total permissible weight of your vehicle and trailer when weighed in combination. (Note that GCWR ratings in- clude a 150 lbs (68 kg) allowance for the presence of a driver).
hitches are the most popular on the market today and they’re commonly used to tow small- and medium-sized trailers. W eight-Distributing Hitch A weight-distributing hitch includes a receiver attache.
T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ T ransmission Model GVWR (Gross V e- hicle Wt. Rating) GCWR (Gross Com- bined Wt. Rating) Frontal Area Max.
Note 1 – The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the T ire and Loading Information placard. Refer to the T ire– Safety Information Section in this manual.
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer-installed options, must be considered as part of the total load on your vehicle.
W ARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control.
2. GTW 3. GA WR 4. T ongue weight rating for the trailer hitch utilized (This requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight). T owing Requirements — T ires − Do not attempt to tow a trailer while using a compact spare tire.
− An electronically actuated trailer brake contr oller is requir ed when towing a trailer with electr onically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required.
NOTE: Do not cut or splice wiring into the vehicles wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector . Refer to the following illustrations. T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic.
If using a manual transmission vehicle for trailer towing, all starts must be in FIRST gear to avoid excessive clutch slippage. T owing T ips — Automatic T ransmission The “D” range can be selected when towing.
− City Driving When stopped for short periods of time, put transmission in neutral and increase engine idle speed. − Highway Driving Reduce speed. − Air Conditioning T urn off temporarily . − refer to Cooling System Operating information in the Maintenance section of this manual for more informa- tion.
T owing — Quadra–T rac II /Quadra–Drive II 4WD Models CAUTION! Front or rear wheel lifts should not be used. Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when recreational towing.
“Electronic V ehicle Information Center (EVIC)” in Sec- tion 4 of this manual. (See page 186 for more informa- tion.) 5. Start engine. 6. Shift transmission into D (Drive). 7. Release brake pedal and ensur e that ther e is no vehicle movement. 8. Shut the engine off.
CAUTION! T ransmission damage may occur if the transmission is shifted into P (Park) with the transfer case in N (Neutral) and the engine running. With the transfer case in N (Neutral) ensure that the engine is OFF prior to shifting the transmission into P (Park) (refer to step s7–8 above).
5. Shift transmission into P (Park). 6. Start the engine. 7. Shift transmission into D (Drive). NOTE: When shifting out of transfer case N (Neutral), turning the engine OFF may be required to avoid gear clash.
CAUTION! Do not use a bumper mounted clamp-on tow bar on your vehicle. The bumper face bar will be damaged. SNOW PLOW Snow plows, winches, and other aftermarket equipment should not be added to the front end of your vehicle. The airbag crash sensors may be affected by the change in the front end structur e.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flashers ................. 3 3 0 䡵 If Y our Engine Overheats ................. 3 3 1 䡵 Jacking And T ire Changing ................ 3 3 2 ▫ Jack Location ........................ 3 3 2 ▫ Spare T ire Stowage .
HAZARD W ARNING FLASHERS Y our vehicle’s hazard warning flasher is an emergency warning system. When you activate it, all front and rear directional signals will flash intermittently . Use it when your vehicle is disabled on or near the road. It warns other drivers to steer clear of you and your vehicle.
IF YOUR ENGINE OVERHEA TS In any of the following situations, you can reduce the potential for overheating by taking the appropriate ac- tion. • On the highways — Slow down. • In city traffic — While stopped, put transmission in N (Neutral), but do not increase engine idle speed.
JACKING AND TIRE CHANGING W ARNING! • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift.
Spare Tire Stowage The spare tire is stowed under the rear of the vehicle by means of a cable winch mechanism. T o remove or stow the spare, use the jack handle to rotate the “spare tire drive” nut. The nut is located under a plastic cover at the center-r ear of the cargo floor area, just inside the liftgate opening.
Spare Tire Removal Fit the jack handle extension over the drive nut. Use the Lug W rench to rotate the nut counter clockwise until the spare is on the ground with enough slack in the cable to allow to pull the tire out from under the vehicle. CAUTION! The winch mechanism is designed for use with the jack extension tube only .
For example, if changing the right front tire, block the left rear wheel. • Passengers should not remain in the vehicle when the vehicle is being jacked.
4. Locate the jack as shown. For the front axle, place it under the front lower control arm as shown. For the rear axle, place it under the axle near the wheel to be changed. Ensure the jack is closest to the inside of the wheel when jacking on the rear axle.
W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6. Remove the lug nuts and wheel. 7. Position the spar e wheel/tire on the vehicle and install the lug nuts with the cone-shaped end toward the wheel.
NOTE: T ire should be stowed with the “beauty” side up. Storing the tire upside down may result in scratching or damage to the wheel face. Continue winching up the tire until you hear the winch “ratchet” three times. Double check to ensure the tire is snug against the underbody of the vehicle.
5. Connect the other cable, first to the negative terminal of the booster battery and then connect the other end to a non-paint metal surface on the engine of the vehicle with the discharged battery . Make sure you have a good contact on the engine. 6.
• Be sure your vehicle is not touching the jump start vehicle. • Observe all Battery W arnings in Section 7 of this manual, while jump starting your vehicle.
W ARNING! Stand clear of vehicles when pulling with tow hooks. T ow straps and chains may break, causing serious injury . TOWING A DISABLED VEHICLE 2WD Models Only Provided the transmission is operable, tow only in N (Neutral) at speeds not exceeding 30 mph (48 km/h), for distances of not more than 15 miles (24 km).
I n f o r m a t i o n P r o v i d e d b y :.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 3.7L Engine ........................... 3 4 5 䡵 4.7L Engine ........................... 3 4 6 䡵 5.7L Engine ........................... 3 4 7 䡵 Onboard Diagnostic System — OBD II ........ 3 4 8 ▫ Loose Fuel Filler Cap Message .
▫ Air Conditioner Maintenance ............. 3 6 0 ▫ Power Steering Fluid Check .............. 3 6 1 ▫ Body Lubrication ..................... 3 6 3 ▫ W indshield W iper Blades ................ 3 6 3 ▫ W indshield W ashers — Front And Rear .
3.7L ENGINE MAINT AINING YOUR VEHICLE 345 7 I n f o r m a t i o n P r o v i d e d b y :.
4.7L ENGINE 346 MAINT AINING YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
5.7L ENGINE MAINT AINING YOUR VEHICLE 347 7 I n f o r m a t i o n P r o v i d e d b y :.
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
cap until a ⬙ clicking ⬙ sound is heard. This is an indication that the gas cap is pr operly tightened. Pr ess the odometer reset button to turn the message off. If the problem persists, the message will appear the next time the vehicle is started.
4. As soon as you turn your key to the ON position, you will see your MIL symbol come on as part of a normal bulb check. 5. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn off the ignition key or start the engine.
DEALER SERVICE Y our dealer has the qualified service personnel, special tools and equipment to perform all service operations in an expert manner . Service Manuals are available which include detailed service information for your vehicle. Refer to these manuals before attempting any procedur e yourself.
could adversely affect the engine or vehicle performance. These items should be inspected if a malfunction is observed or suspected. Engine Oil Checking Oil Level T o assure proper engine lubrication, the engine oil must be maintained at the correct level.
• More than 50% of your driving is at sustained high speeds during hot weather , above 90°F (32°C) • T railer towing • T axi, Police, or delivery service (Commercial Service) • Off road or d.
American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only recommends API Certified engine oils that meet the requirements of DaimlerChrysler Material Stan- dard MS-6395.
Materials Added to Engine Oils The manufacturer strongly recommends against the ad- dition of any additives (other than leak detection dyes) to engine oil. Engine oil is an engineered product and it’s performance may be impaired by supplemental addi- tives.
Belts should be inspected for evidence of cuts, cracks, glazing, or frayed cords and replaced if there is indication of damage which could result in belt failure. Low gen- erator belt tension can cause battery failure. Also, check belt routing to make sure there is no inter- ference between the belts and other engine components.
CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involv- ing engine misfire or other apparent loss of perfor- mance, have your vehicle serviced promptly .
T o minimize the possibility of catalytic converter damage: • Do not shut off the engine or interrupt the ignition when the transmission is in gear and the vehicle is in motion.
W ARNING! The air cleaner can provide protection in the case of engine backfire. Do not remove the air cleaner unless it is necessary for repair or maintenance. Make sure that no one is near the engine compart- ment before starting the vehicle with the air cleaner removed.
T o determine the battery charge, check the battery test indicator (if equipped) on top of the battery . Refer to the illustration. CAUTION! It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post.
W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs.
CAUTION! Do not use Automatic T ransmission Fluid (A TF) or other types of power steering fluids when servicing the power steering system of this vehicle. Damage to the power steering system can result from the use of the wrong power steering fluid. Checking the power steering fluid level at a defined service interval is not required.
Body Lubrication Locks and all body pivot points, including such items as seat tracks, doors, tailgate and hood hinges, should be lubricated periodically to assure quiet, easy operation and to protect against rust and wear .
The fluid reservoir for the windshield washers and the rear window washer is shared. It is located in the front of the engine compartment (on the driver side), and should be checked for fluid level at regular intervals.
Cooling System W ARNING! Y ou or others can be badly burned by hot antifreeze/ coolant or steam from your radiator . If you see or hear steam coming from under the hood, don’t open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator or coolant bottle is hot.
Cooling System — Drain, Flush, And Refill At the intervals shown in the appropriate “Maintenance Schedule,” the system should be drained, flushed, and refilled. If the solution is dirty and contains a considerable amount of sediment, clean and flush with r eliable cooling system cleaner .
Adding Engine Coolant Y our vehicle has been built with an impr oved antifreeze/ coolant that allows extended maintenance intervals. This antifreeze/coolant can be used up to 5 Y ears or 100,000 miles before replacement.
The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces. W ARNING! The warning words DO NOT OPEN HOT on the cooling system pressure cap are a safety precaution. Never add antifreeze/coolant when the engine is overheated.
When additional antifreeze/coolant is needed to main- tain the proper level, it should be added to the coolant bottle. Do not overfill. Points T o Remember NOTE: When the vehicle is stopped after a few miles (kilometers) of operation, you may observe vapor coming from the front of the engine compartment.
ONL Y the correct type thermostat. Other designs may result in unsatisfactory cooling performance, poor gas mileage, and increased emissions. Hoses and V acuum/V apor Harnesses Inspect surfaces of hoses and nylon tubing for evidence of heat and mechanical damage.
Brake and Power Steering System Hoses When servicing the vehicle for scheduled maintenance, inspect surface of hoses for evidence of heat and me- chanical damage. Hard and brittle rubber , cracking, tears, cuts, abrasion, and excessive swelling suggest deteriora- tion of the rubber .
fluid reservoir . W ith disc brakes, fluid level can be expected to fall as the brake pads wear . However , low fluid level may be caused by a leak and a checkup may be needed. Use only manufacturer’s recommended brake fluid, refer to Fluids, Lubricants, and Genuine Parts for correct fluid type.
for corr ect fluid type. It is important that the transmission fluid be maintained at the prescribed level using the recommended fluid. CAUTION! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder .
5. Remove the dipstick, wipe it clean and reinsert it until seated. 6. Remove the dipstick again and note the fluid level on both sides. The fluid level should be between the “HOT” (upper) reference holes on the dipstick at normal operat- ing temperature.
Special Additives The manufacturer recommends against the addition of any additives to the transmission. Exception to this policy is the use of special dyes to aid in detecting fluid leaks. T ransfer Case Fluid Level Check Inspect the transfer case for fluid leaks.
Front/Rear Axle Fluid Front Axle Fluid Level Check Lubricant should be to the bottom of the oil fill hole. Rear Axle Fluid Level Check Lubricant should be 1/2” (1 cm) below the oil fill hole. Adding Fluid Add lubricant only at the fill hole and only to the level specified above.
CAUTION! Under frequent heavy-duty driving conditions, change all lubricants and lubricate body compo- nents, all driveline joints and steering linkage more often than in normal service to prevent excessive wear .
• If insects, tar , or other similar deposits have accumu- lated on your vehicle, use Mopar 威 Super Kleen Bug and T ar Remover to remove. • Use Mopar 威 Cleaner W ax to remove road film, stains, and to protect your paint finish. T ake care never to scratch the paint.
• Aluminum wheels should be cleaned regularly with a mild soap and water to prevent corrosion. T o remove heavy soil, use Mopar 威 Wheel Cleaner or select a nonabrasive, non-acidic cleaner . Do not use scouring pads, steel wool, a bristle brush or metal polishes.
do not use polishes, oils, cleaning fluids, solvents, deter- gents, or ammonia based cleaners to clean your leather upholstery . Application of a leather conditioner is not requir ed to maintain the original condition. W ARNING! Do not use volatile solvents for cleaning purposes.
Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage will also weaken the fabric. If the belts need cleaning, use Mopar 威 T otal Clean, a mild soap solution, or lukewarm water .
Cavity Fuse/Color Description 1 30 Amp Pink Audio Amp (B+) 2 15 Amp Blue Sunroof (B+) 3 10 Amp Red Htd Mirror (EBL) 4 20 Amp Y ellow Rr Pwr Out (B+) 5 10 Amp Red Rr HV AC (R/O) 6 10 Amp Red OCM (B+) 7.
Underhood Fuses (Power Distribution Center) Cavity Fuse/Color Description 1 40 Amp Green HV AC Blower 2 30 Amp Pink Power Outlets 3 30 Amp Pink Rr W iper/Ign R/O Cavity Fuse/Color Description 4 30 Amp.
Cavity Fuse/Color Description 20 20 Amp Y ellow PCM Batt (Gasoline Only) 21 30 Amp Pink ABS V alves 22 Spare 23 20 Amp Y ellow FDCM 24 20 Amp Y ellow Fuel Pump 25 20 Amp Y ellow FDCM/E-Diff.
Underhood Fuses (Integrated Power Module) Cavity Fuse/Color Description 1 Micro Relay W iper On/Off Rly 2 Micro Relay W iper Hi/Lo Rly 3 Micro Relay Horn Rly Cavity Fuse/Color Description 4 Micro Rela.
Cavity Fuse/Color Description 20 20 Amp Y ellow FCM Batt #3 21 20 Amp Y ellow Rt T -T ow Stop/T urn 22 30 Amp Pink FDCM Mod 23 50 Amp Red Rad Fan 24 Mini Relay Rad Fan Lo Rly 25 Micro Relay Ft Fog Lamps Rly 26 Micro Relay Adjustable Pedal Rly 27 15 Amp Blue IOD #1 28 20 Amp Y ellow IOD #2 (Audio) 29 10 Amp Red ORC (Ign R/.
REPLACEMENT BULBS Interior Lights Bulb T ype Glove Box Light ......................... 1 9 4 Grab Handle Light ................ L002825W5W Overhead Console Reading Lights .......... VT4976 Rear Cargo Light ....................... 214–2 V isor V anity Light .
FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 20.6 Gallons 78 Liters Engine Oil with Filter 3.7 Liter Engine (5W -30, API Certified) 5 Qts 4.7 Liters 4.7 Liter Engine (5W -30, API Certified) 6 Qts 5.7 Liters 5.7 Liter Engine (5W -20, API Certified) 7 Qts 6.
FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant Mopar 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) Engine Oil (3.
Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission Mopar 威 A TF+4 Automatic T ransmission Fluid T ransfer Case (3.7L Engines) Mopar 威 A TF+4 Automatic T ransmission Fluid T ransfer Case (4.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance ........ 3 9 2 䡵 Maintenance Schedules ................... 3 9 2 ▫ Schedule “B” .
EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued proper functioning of the emission control system.
• T axi, police, or delivery service (commercial service) • Off-r oad or desert driving • If equipped for and operated with E-85 (ethanol) fuel. NOTE: Most vehicles are operated under the conditions listed for Schedule “B.
• Check the windshield washer solvent, add as r equired. Once a Month • Check the tire pressure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of the coolant reservoir , brake master cylinder , and transmission, and add as needed.
Schedule “B” Follow this schedule if you usually operate your vehicle under one or more of the following conditions. • Day or night temperatures are below 32°F (0°C) • Stop and go driving • Excessive engine idling • Driving in dusty conditions • Short trips of less than 10 miles (16.
Miles 3,000 6,000 9,000 12,000 15,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X Check spare tire for proper pressur e and correct stowage.
Miles 18,000 21,000 24,000 27,000 30,000 (Kilometers) (30 000) (35 000) (40 000) (45 000) (50 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X X Check spare tire for proper pressur e and correct stowage.
Miles 33,000 36,000 39,000 42,000 45,000 (Kilometers) (55 000) (60 000) (65 000) (70 000) (75 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X Check spare tire for proper pressur e and correct stowage.
Miles 48,000 51,000 54,000 57,000 60,000 (Kilometers) (80 000) (85 000) (90 000) (95 000) (100 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X X Check spare tire for proper pressur e and correct stowage.
Miles 63,000 66,000 69,000 72,000 75,000 (Kilometers) (105 000) (1 10 000) (115 000) (120 000) (125 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X Check spare tire for proper pressur e and correct stowage.
Miles 78,000 81,000 84,000 87,000 90,000 (Kilometers) (130 000) (135 000) (140 000) (145 000) (150 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X X Check spare tire for proper pressur e and correct stowage.
Miles 93,000 96,000 99,000 102,000 105,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X Check spare tire for proper pressur e and correct stowage.
Miles 108,000 1 1 1,000 1 14,000 117,000 120,000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X X Check spare tire for proper pressur e and correct stowage.
Miles 108,000 1 1 1,000 1 14,000 117,000 120,000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Flush and replace the engine coolant/anti-freeze at 120 months, if not replaced at 102,000 miles (170 000 km). X Inspection and service should also be performed anytime a malfunction is observed or suspected.
Schedule “A” Miles 6,000 12,000 18,000 24,000 30,000 (Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) [Months] [6] [12] [18] [24] [30] Change the engine oil and engine oil filter . X X X X X Rotate the tires. X X X X X Check spare tire for proper pressur e and correct stowage.
Miles 36,000 42,000 48,000 54, 000 (Kilometers) (60 000) (70 000) (80 000) (90 000) [Months] [36] [42] [48] [54] Change the engine oil and engine oil filter . X X X X Rotate the tires. X X X X Check spare tire for proper pressur e and correct stowage.
Miles 60,000 66,000 72,000 78,000 (Kilometers) (100 000) (1 10 000) (120 000) (130 000) [Months] [60] [66] [72] [78] Change the engine oil and engine oil filter . X X X X Rotate the tires. X X X X Check spare tire for proper pressur e and correct stowage.
Miles 84,000 90,000 96,000 102, 000 (Kilometers) (140 000) (150 000) (160 000) (170 000) [Months] [84] [90] [96] [102] Change the engine oil and engine oil filter . X X X X Rotate the tires. X X X X Check spare tire for proper pressur e and correct stowage.
Miles 108,000 1 14,000 120,000 (Kilometers) (180 000) (190 000) (200 000) [Months] [108] [1 14] [120] Change the engine oil and engine oil filter . X X X Rotate the tires. X X X Check spare tire for proper pressur e and correct stowage. X X X Inspect the engine air cleaner filter , and replace if necessary .
* This maintenance is not requir ed if the belt was previously replaced. W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V e h i c l e .............................. 4 1 2 ▫ Prepar e For The Appointment ............ 4 1 2 ▫ Prepar e A List ........................ 4 1 2 ▫ Be Reasonable W ith Requests .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager .
technicians, special tools, and the latest information to assure your vehicle is fixed correctly and in a timely manner . This is why you should always talk to your dealer’s service manager first.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center .
W ARRANTY INFORMA TION (U.S. V ehicles Only) See the W arranty Information Booklet for the terms and provisions of DaimlerChrysler’s warranties applicable to this vehicle. MOP AR 姞 P ARTS Mopar 威 fluids, lubricants, parts, and accessories are available from your dealer .
PUBLICA TION ORDER FORMS T o order the following manuals, you may use either the website or the phone numbers listed below . V isa, Mas- tercar d, American Express, and Discover orders are ac- cepted. If you prefer mailing your payment, please call for an order form.
Call T oll Free at: • 1–800–890–4038 (U.S.) • 1–800–387–1 143 (Canada) Or V isit us on the W orld Wide W eb at: • www .techauthority .
on specified government test surfaces of asphalt and concrete. A tir e marked C may have poor traction perfor- mance. W ARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.
INDEX 10 I n f o r m a t i o n P r o v i d e d b y :.
ABS (Anti-Lock Brake System) ............ 179,271 Adding W asher Fluid ..................... 1 6 9 Adjustable Pedals ....................... 1 4 7 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 358 Air Conditioner Maintenance ............... 3 6 0 Air Conditioning .
Autostick ............................. 2 5 8 Auxiliary Electrical Outlet (Power Outlet) ...... 1 6 2 Auxiliary Power Outlet ................... 1 6 2 Battery ............................... 3 5 9 Emergency Starting ..................... 3 3 8 Keyless T ransmitter Replacement (RKE) .
Chains, T ire ............................ 3 0 3 Changing A Flat T ire ..................... 3 3 2 Chart, T ire Sizing ........................ 2 8 2 Checks, Safety ......................... 7 0 , 7 1 Child Restraint .................... 5 8 , 5 9 , 6 4 , 6 6 Child Restraint T ether Anchors .
Defroster , Rear W indow ................... 2 3 3 Defroster , W indshield ................ 7 1 , 234,241 Diagnostic System, Onboard ................ 3 4 8 Dimmer Switch, Headlight ................. 1 2 6 Dipsticks Automatic T ransmission ............
Block Heater ......................... 2 5 5 Break-In Recommendations ................ 6 8 Compartment ......................... 3 4 6 C o o l i n g ............................. 3 6 5 Exhaust Gas Caution .................. 6 9 , 3 0 8 Fails to Start .
Fluid Leaks ............................. 7 1 Fluid Level Checks Automatic T ransmission ............... 372,373 Engine Oil ........................... 3 5 2 Power Steering ........................ 3 6 1 Fluids, Lubricants and Genuine Parts ..........
Gear Ranges ........................... 2 5 7 General Information .................... 2 4 , 3 0 3 Glass Cleaning .......................... 3 8 0 Gross Axle W eight Rating .................. 3 1 3 Gross V ehicle W eight Rating ................ 3 1 2 Hands-Free Phone (UConnect™) .
Interior Lighting ........................ 1 2 0 Interior Lights ....................... 120,125 Intermittent W ipers (Delay W ipers) ........... 1 2 8 Introduction ............................. 4 Jack Location ........................... 3 3 2 Jack Operation .
Dimmer Switch, Headlight ............. 122,126 Electronic Stability Program (ESP) Indicator ........................ 140,180,183 Electronic Throttle Control W arning ......... 1 8 4 F o g ............................. 126,185 Four-Wheel Drive Indicator .
Liftgate, T ailgate ........................ 1 8 Power Door ........................... 2 0 Lower Anchors and T ether for CHildren (LA TCH) ............................ 6 3 , 6 4 Lubrication, Body ....................... 3 6 3 Luggage Rack (Roof Rack) .
Occupant Classification System (OCS) .......... 4 8 Occupant Restraints ....................... 3 2 Octane Rating, Gasoline (Fuel) .............. 3 0 5 Odometer .......................... 183,184 T r i p ................................ 1 8 3 Off-Pavement Driving (Off-Road) .
P o l i s h i n g a n d W a x i n g ..................... 3 7 8 Power Distribution Center ..................... 3 8 3 Door Locks ........................... 2 0 M i r r o r s .............................. 8 1 Outlet (Auxiliary Electrical Outlet) ....
Recorder , Event Data ...................... 5 6 Recreational T owing ...................... 3 2 3 Shifting into T ransfer Case Neutral (N) ....... 3 2 4 Shifting out of T ransfer Case Neutral (N) ..... 3 2 6 Reformulated Gasoline ....................
Reminder ............................ 1 8 3 Shoulder Belt Anchorage .................. 3 7 Seats ................................. 1 0 5 Adjustment .......................... 1 0 5 Cleaning ............................ 3 7 9 Easy Entry ...............
O i l ................................ 3 5 3 Speed Control (Cruise Control) .............. 1 4 8 Speedometer ........................... 1 7 8 Starting ............................... 2 5 3 Automatic T ransmission ................. 2 5 3 Cold W eather .
Inflation Pressur es ..................... 2 9 0 Jacking ............................. 3 3 2 L i f e o f T i r e s .......................... 2 9 4 Load Capacity ..................... 285,286 Pressur e Monitor System (TPMS) ........... 2 9 7 Pressur e W arning Light .
T ransmission Automatic ........................ 256,372 Maintenance .......................... 3 7 2 Range Indicator ....................... 1 8 4 S h i f t i n g ............................. 2 5 6 T ransmitter Battery Service (Remote Keyless Entry) .
W indows Power ............................... 2 9 W indshield Defroster ................ 7 1 , 234,241 W indshield W ashers ...................... 1 2 7 F l u i d ............................... 3 6 3 W indshield W iper Blades .................. 3 6 3 W indshield W ipers .
438 INDEX I n f o r m a t i o n P r o v i d e d b y :.
NOTES I n f o r m a t i o n P r o v i d e d b y :.
NOTES I n f o r m a t i o n P r o v i d e d b y :.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Jeep Commander (2006) c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Jeep Commander (2006) - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Jeep Commander (2006), vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Jeep Commander (2006) va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Jeep Commander (2006), mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Jeep Commander (2006).
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Jeep Commander (2006). Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Jeep Commander (2006) ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
