Manuel d'utilisation / d'entretien du produit XP-P5IM800GV du fabricant Intel
Aller à la page of 26
M - 050401 XP-P5IM800GV Intel ® Pentium ® 4 LGA775 Processor Motherboard User's Manual.
Motherboard XP-P5IM800GV May 27, 2005 May 27, 2005 XP-P5IM800GV Motherboard Copyright Declaration © 2005 Gigatrend Technology Co., Ltd. All rights reserved. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without express permission from Gigatrend Technology.
Contents Motherboard Layout ........................................................................ 4 1. Product Introduction .................................................................. 5 1.1. Feature Summary ..................................
4 English Motherboard Layout KB_MS COMA ATX LPT CPU_FAN SYS_FAN FDD F_PANEL F_USB1 PWR_LED PCI3 CODEC CD_IN LGA775 USB LAN BAT ICH5 PCI1 PCI2 SmSC LPC47M997-NR BIOS XP-P5IM800GV VGA ATX_12V Intel 865G.
English 5 CPU LGA775 for Intel ® Pentium ® 4 Processor Intel ® Pentium ® 4 533/800MHz FSB L2 cache depends on CPU Chipset North Bridge: Intel ® 865 G V South Bridge: Intel ® I CH 5 Memory 2 184-pin DDR DIMM sockets, supports up to 2GB DRAM (Max) Supports dual channel DDR400/DDR333 DIMM Supports only 2.
6 English 1.2. I/O Back Panel and Connectors&Jumper Setting 1.2.2. Connectors&Jumper Setting FDD (Floppy Disk Drive Connector) The FDD connector is able to connect a single floppy disk drive via a FDD cable. Usually one edge of the FDD cable is marked in red, please attach this marked edge to position 1 on the connector.
English 7 CPU_FAN (CPU Fan Power Connector); SYS_FAN (System Fan Power Connector) The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin(only for CPU_FAN) power connector and possesses a ful-proof connection design. Most coolers are designed with color-coded power connector wires.
8 English F_AUDIO (Front Audio Connector) Connects to the audio connector located on the front panel of the system casing (dependent on case design). When use of the front panel audio connector is required, please remove the 5-6 pin, 9-10pin jumper.
English 9 2. Hardware Installation 1. Please make sure that the CPU used is supported by your motherboard. 2. Please be aware of the placement position of the CPU. If the CPU does not insert properly, do not apply force but check the placement position.
10 English 2.1. Installation of a LGA775 Pentium 4 CPU and Fan Sink 2.1.1. Installation of a LGA775 CPU 3. Hold the CPU with your thumb and index fingers (do not touch the bottom of the CPU when holding it). Align notchs on the two sides of the CPU with the small sockets of the CPU socket and place the CPU straight down.
English 11 2.2. Installation of Memory 1. Before installing or removing memory, please make sure that the computer power is turned off to prevent hardware damage. 2. Please make sure that the memory used is supported by the motherboard. 3. Memory modules have a foolproof insertion design.
12 English 2.4.1. Graphics Card Support List (The items below are all supported under the Windows XP operating system. When using an add-on graphics card, please first delete the onboard graphics driver before installing the driver for the add-on graphics card.
English 13 Graphics Chip Maker Model Name Nvidia Gigabyte GV-N4464D Gigabyte GV-N4064T Gigabyte GV-N52128DE Gigabyte GV-N55128DP Gigabyte GV-N57L128D Gigabyte GV-N57128DE Gigabyte GV-N57128DP Gigabyte.
14 English.
English 15 3. BIOS Setup BIOS (Basic Input and Output System) stores all the information of the motherboard settings that is needed for system initiation within the CMOS. The CMOS SETUP utility allows the user to make changes in BIOS configurations that are required or to activate certain features.
16 English <F6> Gives the list of options available for each item <F7> Return to Optimized default values (not applicable to main setup screen) <F8> Enters Expert-Flash feature <F9> Displays system information <F10> Saves settings and exits setup 3.
English 17 n IDE Channel 2/3 Master [IDE Device Setup] IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.
18 English " # " If the installed CPU is an Intel Pentium 4 CPU supporting Hyper-Threading Technology, the system will automatically provide this option. 3.3. Advanced BIOS Features ø Allows the configuration of advanced settings such as boot sequence, password check, etc.
English 19 3.4. Integrated Peripherals ø This menu allows you to control the various ports of the computer such as IDE, SATA, USB, IEEE1394, COM port, LPT port, AC97 audio, etc. n On-Chip Primary PCI IDE Allows the user to enable or disable the first onboard IDE channel.
20 English n On-Chip SATA Options: Disabled (Disable this function.) Auto (When there is no device connected to IDE1 or IDE 2 channel, SATA will be configured as IDE mode.) Manual (Manually configure SATA mode via the "SATA Port0 configure as" option.
English 21 3.5. Power Management Setup ø This is used to control the various power saving features of the PC. n ACPI Suspend Type Allows user to select the Advanced Configuration and Power Interface(.
22 English 3.6. PnP/PCI Configuration ø This menu allows you to configure your PCI slots. You can assign IRQ's for various PCI slots. n PCI 1 IRQ Assignment Allows you to assign an IRQ for the first PCI slot. Options: Auto,3,4,5,7,9,10,11,12,14, 15 (default:Auto) n PCI 2 IRQ Assignment Allows you to assign an IRQ for the second PCI slot.
English 23 3.7. PC Health Status ø This menu displays the current CPU temperature, the fan speeds, voltages etc. n Current CPU / System Temperature Automatically checks CPU & System temperature n Current Voltage(V) Vcore / DDR25V / +3.
24 English 3.8. Frequency/Voltage Control ø This allows user to configure CPU frequency and voltage settings. n CPU Clock Ratio Allows user to set the CPU Clock Ratio. If the CPU used locks this feature, then it will not be displayed or will not function.
English 25 3.9. Load Fail-Safe Defaults ø Use this option to reset your BIOS settings to the system defaults. You should only use this if you are encountering serious problems.
26 English 4. Driver Installation Driver installation for the Windows 98/98SE/2000/ME/XP operating systems is simple. Once you insert the provided driver disks into your optical drive, the AUTORUN screen will appear. If this screen does not appear, you can use "D:setup.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Intel XP-P5IM800GV c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Intel XP-P5IM800GV - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Intel XP-P5IM800GV, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Intel XP-P5IM800GV va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Intel XP-P5IM800GV, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Intel XP-P5IM800GV.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Intel XP-P5IM800GV. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Intel XP-P5IM800GV ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
