Manuel d'utilisation / d'entretien du produit IE-IMCV du fabricant IMC Networks
Aller à la page of 60
IE-iMcV-MultiWay Operation Manual.
ii FCC Radio Frequency Inter ference Statem ent Class A ( using 48V Telco type power) This eq uipment has b een t este d and found to comp ly wit h the limits fo r a Cl ass A com puting devic e, p ursuant to Pa rt 15 of the F CC Rules.
iii Table of Cont ents FCC Radio Fre quency Inter ference Stateme nt ....................................................... .... ii Warranty ............ ................................................................. ..............................
iv RS-232 Serial Console Por t........................................... ................................... 45 Product Applica tions ........................................... .................................................... 46 Glossary .......
1 Abou t the IE -iMcV -MultiW ay The IE-iMc V-MultiWay is a CPE device, availa ble as a modul ar device provi ding tw o fix ed 10/100/ 1000Base-T copper ports a nd 2 SFP ports.
2 About IE -iMcV -MultiW ay Feat ures and Config uration The IE-iMcV-Mul tiWay offers a full fea ture se t inclu ding Auto Negoti ation, Sele ctive Advertisin g, Aut oCross, VLANs, SN MP manage ment, loopba ck testin g and OAM. Uni t software updates can be d ownloaded thro ugh TFTP or iView 2 (iC onfi g view) .
3 When usin g iView 2 , the IE -iMcV-MultiW ay can be fully man aged without an IP address using a secure manage ment channel. Howeve r, an IP addre ss can be assi gned thro ugh iVi ew2 (iCo nfig v iew), the CLI or Telnet using the default IP address of 10 .
4 About iVie w 2 (iConfig view) iVie w 2 (iConfig view) is an in-band utili ty created by IMC Net works, used f or SNMP configuration for IMC Networks ’ SNMP-manag eable devices.
5 DIP Switch Selectable Mode Co nfiguration The IE-iMcV-MultiWay can be configured in one of the f ollowing ways via DIP Switc h settings (see page 6): Config uration Method Description 4-Port Switch (default) In this mode, t he unit acts as a stand ard 4-p ort MAC-layer s witch.
6 DIP Switch con figuration DIP Switch Name Description Defau lt Setting 1 Dual Enable dual cha nnel OFF 2 1+1 Provides 1+1 pro tection with non-revertive switching OFF 3 1+1 Rever t Provides 1+1 prot.
7 LED Operation Each IE-iMcV-M ultiWay includes SFP and RJ-45 LEDs. (TX 1, TX 2) LNK/ACT FDX SFP A, SFP B OAM ACTIVE LNK FLT Glows green whe n a link is established on the TX port; blinks green when activ ity is detected on th e TX port.
8 Configu ration The IE-iMcV-MultiW ay inclu des many features tha t are con figurable via a serial/Telnet se ssion (CLI) or through iView ² (SNM P Managem ent view or iConfig view). Configu ration Options The follow ing options are configurable through both the iView 2 (iConfig vie w) and Serial/Telne t.
9 Basi c Device Configura tion Using the CLI After running through an initial self tes t, th e scre en will display the foll owing message: Press Enter for Device C onfiguration.
10 This screen contains the following inf ormation and options: Saved and Current Values Sav ed values display the chang es made d uring the curr ent sessio n and cur rent valu es display the val ues .
11 sensitive and must not exceed eight c haracters or include spaces, and press Enter . This password will be requeste d whenever logging on. To remove password protection, select P and, instead of en tering a pa ssw ord, press Enter .
12 Deleting Communi ty Strings To delete all co mmunity string s, perform the follo wing: Press U . The "Are you sure y ou want to delete all future str ings?" prompt is displaye d. Press Y when promp ted to proce ed and delete all comm unity strings, N to abor t.
13 DHCP Disable (Static IP Addr essing) DHCP is disabled in the default configuration. Initially, modules are assigne d a Static default IP Address of 10.10.10. 10. Chan ges to the Static I P Address can be a dded manually throug h iView 2 (iConfig view) o r a Consol e session.
14 Commands List (Space Bar) The IE-iMcV-MultiWay also includes several device-specific options. To access these options, p ress the Space Bar from the Main Co nfiguratio n screen, type t he name of the action to be perf ormed (as shown be low) and press Enter .
15 Command Description unit Unit global settin gs, frame size selection. Un it OAM en able must be enabled for AH and A G to fu nction. port Displays the port status and allo ws chan ges to port settings, such as dupl ex status and speed. Cleand b Entering cleandb reb oots the unit with it s database cleaned depending on the option selected.
16 After the transfe r process is complete, press Enter to lo ad the conf igurat ion fi le: Once loaded into the device's SNM P memo ry area, the system prompts the use r to reboot the device to make the new configu ration active.
17 Viewi ng Port S tatist ics To v iew port statist ics on t he IE-iM cV-MultiWa y, enter ifstats . This will op en a screen displaying in form ation on packets rece ived and t ransmi tted as defined by M IB-II standard R FC 1213. Pressing the Space Bar will refresh the dat a on th e scree n.
18 Version Entering version will display the version of the firmware operat ing the IE-iMcV- MultiWay. Settings s hould be s aved prior t o reboot. Reboot Entering reboot will s ave se ttings and rebo ot the IE-iMcV -Multi Way. Viewi ng SFP Stat istics To view SFP stat istics on the IE -iMcV-MultiW ay, enter sfpstats.
19 Port Configura tion Serial/Telnet sessions display port status as well as allowing conf iguration of some port features. Type por t and press Enter to be take n to the Port screen. From this screen, vi ew the po rt speed , dupl ex and li nk statu s.
20 Adv erti s e Flo wC and Force FlowCtrl - This is the FlowC ontrol feature . • When using FlowControl fun ctionality on any port, e nable Gl obal FlowCon trol. Th en, configu re each po rt ind ividua lly. • Whe n usi ng Auto Nego tiat ion and Flow Cont ro l, set Advertise FlowC to Advertis e Flow and set Force FlowCtrl to Flow Auto.
21 Operat ional Mode Con figuration Th ere are two modes of operati on that can b e configur ed through th e Seria l/Telnet session: Mode 1, which supports a mixture of tagged an d unta gged traffic, an d Mode 2 Extra ta gging. The configuration screen is acce ssed by typing vlan and pressing Enter from the Additional Commands screen.
22 Operation Mode 2 Port Based Xtra Tagging Any port can be con figure d for extra t ags on t he fram es. Press the down arrow on the computer ke yboard to access the add itional configuration comm an.
23 VLAN Configuration The ports can b e assigne d as a tr unk or acce ss port. When configuring a tr unk port, an Ethertype ca n be user-defined (a trunk port is also define d a s a pro vi der p ort bas e d on 8 02.
24 OAM AH (Operation and Admi nistration Management) Two modes of operations c ontrol the OAM fun ction, Passive and Active. Passive mode is the defa ult mode. OAM AH passive/active is available on the fiber SFP ports and TX ports • Supports Discovery functions on the SFP ports.
25 Usi ng iV iew 2 iVi ew² is IMC Networ ks’ management softw are, prov iding network management in an easy to use Graphical User Interface (G U I). Once iVie w² is installe d on a n etwork management PC using a Windows operating system, use the Start menu to ac cess iView².
26 The fo llowing functions can be performed via iView 2 : Func ti on Descri ption Unit Configuration Display/modify unit information. Port Configuratio n Display/modify port data. Tables Displ ay statistic s tables, in cluding Unit and Port table s, RMON statis tics, MIB-II if Table and SFP Info.
27 Port Configuration Select Po rt Configur ation t o display/modify po rt informa tion including description and flow cont rol:.
28 Tables Selec t tables to displa y a screen fr om which to select the specific statistics to be viewe d : Select Unit and Port Tables to display the follow ing information:.
29 Enter a VLAN ID between 1 and 4,094 ; possible prio ri ty set tings a re 0 (l owest pr iori ty) thro ugh 7 (highest priority). Advanced Select Advanced to reboot the mod ule :.
30 OAM AH Selec t OAM AH to di splay th e followi ng scre en and monit or the st atus, co nfigura tion, loop back, ev ent log and st atistics :.
31 From the above screen, sele ct Configuration to display state and event configuration info rmation as well as OAM supported functions: Sele ct Loo pba ck to disp lay loo pba ck dat a an d de fine h.
32 Selec t Event Log to di splay the OAM ev ent log showi ng chang es that have occurr ed via OA M configuratio n: Select Statistics to display OAM statistics:.
33 OAM CFM Select OAM C FM to dis play t he followin g screen a nd perform a dministrative co ntrol for Maintenance Domain s (MD s), Mainte na nce Assocations (M As) and Mainten ance Association End Points (MEPs).
34 For the first-time configuration, the user mu st fi rst create an MD , then an MA, then local and peer MEPs can be adde d. To create an MD, select the "C onfigure MD' button to dis pla y .
35 For the first c onfiguration, create an MA after the MD . Select "Configure M A" to disp lay the OAM CF M Maintenance Asso ci ation Configuration screen as shown below: NOTE iView 2 will a utomatically d isplay this pa ge if there is no MA yet defined when the user attempts to access any othe r menu control .
36 Select the MD, MA, enter the MEP ID, select the appropriate type, port an d direct ion, an d se lec t the Primary VID , if app licable. To cancel the MEP wi thout saving, se lect Delete .
37 The M EP Instance Conf iguration page offers mor e details about an individu al MEP as shown below: From this sc reen, t he user can perfo rm the following functio ns: Func ti on Description Contin uity Check Enable/disable CCMs an d verify the number of CCMs that have been sent .
38 Agent Info Selec t Agent I nfo to dis play SNMP agent dat a :.
39 Connecting th e IE-iMcV-MultiWay to an iMcV-Giga-FiberLinX-II If the IE-iMc V-MultiWay is b eing set up as a Re mote (CPE) to a Hos t connection with an iMcV-Giga -FiberLinX-II, i View 2 provides su pport fo r SNMP manage ment of the pair. Sever al pa irs can b e manage d via UM A th rough t he SNM P manageme nt module on the same IP addre ss.
40 Configu ration File Sa ve/R estore Functi on Requir ements The Configuration File Save /Res tore Function allows a use r the ability to backup all the config uration settin gs of a u nit. Wit h th is back up, a user can restore settings to a unit if necess ary or u se this ba ckup t o apply the same settings to a different unit.
41 Savi ng a Co nf ig urat io n F ile t o D isk : From th e Administration Tab i n iView 2 (iConfi g view) clic k the Save Con figurati on button: The user is prompte d for a filename :.
42 Th e user is prompt ed to enter an y notes to th e header of the saved f ile for futur e reference when uploading the file through iVie w 2 (iConfig view): After the file transfer from the device t.
43 Uploading a Saved Conf iguration F ile through iV iew 2 (iConfig view) From th e Administration Tab i n iView 2 (iConfi g view) clic k the Upload Configuration button: The user will be promp ted t o select a config uration f ile.
44 SFP Ports The IE-iMcV-Mul tiWay SFP p orts sup port gig abit fiber S FPs and 100M bps fiber SFPs, with or without Digital Diagnostics Monit oring Information (DD MI) as well as copper SFPs avail able in 10/1 00/1000Mbp s and 100 0Mbp s.
45 RJ-45 Data Port Pinout The fo llowing tabl e lists th e pin configuration fo r the RJ-45 Data conne ctor. Pin Signal Name 1000M Signal Direction 10/100M 1 TXD1+ Out* 2 TXD1- Out* 3 RXD2 + In* 4 D3+.
46 Product Applicat ions For a detaile d description of the product applic ations, please refer to t he IE-iMcV- MultiWay dat a sheet at http://ww w.imcnetworks .
47 Glossary The following are terms and phrases used with in this manual, or which are found in docu ments as sociat ed with this equipment . Term/Acronym Def inition 1+1 Th e Term “1+1” r efers to line pro tection where ide ntical information is transmitted on two redundant lin es.
48 Term/Acronym Def inition MDI/MDIX Media-Depen dent Inte rface/ M edia-Depe ndent Interface Crossover. The ability of an Ethe rnet port to au tomatical ly de tect and configure its cabling connect ion s to acc omm odate cr osso ver or no n-crosso ver wirin g, dependi ng on its li nk partne r and cabling.
49 Trouble shoot ing If a fiber co nnectio n cannot be est ablis hed, per form th e followi ng to mak e sure th at the fi ber transc eiver s on the IE- iMcV-Mult iWay are not over/under drivin g the fiber receivers: 1. Make sure th e fiber wavele ngth on bo th connected devices matc h (i.
50 Spec if icat io ns Ethernet Connections • SFP 1000 Base -X • SFP 100 Base –FX • SFP 10/1 00/1000 C opper ( SGMII) • 10/100/1000 BaseT (Fixe d Copper ports) • Auto Nego tiation • Auto-C ross • Flo w C ont ro l • Up to 10,240 MT U • Full L ine -Rat e F orwa rdin g Power Consumption (Typical) 3.
51 IMC Networks Technical Suppor t Tel: (949) 465-3000 or (800 ) 624-1 070 (in the U.S. and Canada); +32-16-550 880 (Europe) Fax: (9 49) 465-3 020 E-Mail: techsuppor t@im cnetwork s.
52 Fiber Op tic Cleaning Guidelines Fiber Optic tran smitters and rece ivers are extrem ely susceptibl e to contamination by particles of d irt or dust, which can obst ruct the optic path and cause performance degradation. Good system performan ce requires clean optics and c onnector ferrules.
53 El ectro stati c Dis charg e Preca utions Electrostatic discharge (ESD) can cause dama ge to any product, add- in module s or stand alone units, containing ele ctronic componen ts. Always observe the following precauti ons when installing or han dling these kinds of produc ts 1.
54 Notes.
55 Certi fic at ions CE: The products describe d herein co mply with the Council Directive on Electromagne tic Compat ibility (2004/ 108/EC). European Directive 2002/96/EC (WEEE) requir es that any equipment that bears this symbol on product or pa ckagin g must n ot be d ispose d of wi th unsor ted muni cipal waste.
19772 Pauling y Foothill Ranch, CA 92610-2611 USA TEL: (949) 46 5-3000 y FAX: (949) 465 -302 0 www.imcnetworks.com © 2011 I MC Networks. Al l rights r eserved. The info rmation in this docum ent is subject to change with out no tice. IMC Networks assumes no responsibi lity for any errors that may appear in this docume nt.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté IMC Networks IE-IMCV c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du IMC Networks IE-IMCV - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation IMC Networks IE-IMCV, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le IMC Networks IE-IMCV va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le IMC Networks IE-IMCV, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du IMC Networks IE-IMCV.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le IMC Networks IE-IMCV. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei IMC Networks IE-IMCV ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
