Manuel d'utilisation / d'entretien du produit ICE0250 Series du fabricant Ice-O-Matic
Aller à la page of 164
SERVICE AND INSTALLATION MANUAL THE ICE SERIES CUBERS ICE0250 through ICE2100 SERIES* *Includes Undercounter and 22 Inch Series ICE-O-Matic 11100 East 45th Ave Denver, Colorado 80239 Part Number 90812.
ICE Series Notes Table of Contents Table of Contents P a g e A 1 General Information How To Use This Manual Page A2 Model And Serial Number Format Page A3 Electrical And Mechanical Specifications Page.
ICE Series Table Of Contents Page A1 Table of Contents Table of Contents P a g e A 1 General Information How To Use This Manual Page A2 Model And Serial Number Format Page A3 Electrical And Mechanical.
ICE Series General Information Page A2 How To Use This Manual Ice-O-Matic provides this manual as an aid to the service technician in installation, operation, and maintenance of the ICE Series (electro-mechanical) cube ice machines.
ICE Series General Information Page A3 Model and Serial Number Format Model Numbers ICE 040 0 H A Condenser Type: A=Air W=Water R=Remote T=Top Discharge Air Cooled Cube Size: H=Half (3/8 X 7/8 X 7/8) .
ICE Series General Information Page A4 Model and Serial Number Format Since all Enodis companies will eventually be utilizing same operating system, a company wide format for serial numbers has been designed. This format is 14 characters long and begins with a date code followed by the Ic e-O-Matic identifier, and then a sequential number.
ICE Series General Information Page A5 24 Hour Capacity Wires Max Min. Voltage @ 90/70 Including Fuse Circuit Comp. **Refrigerant Model Hz/Phase Lbs. Kg. BTUH Ground Size Amp s RLA Typ e Oz. Grams ICEU150*A1 115/60/1 117 53 3148 3 15 9.6 6.8 R404A 13 369 ICEU150*W1 115/60/1 166 75 3392 3 15 7.
ICE Series General Information Page A6 24 Hour Capacity Wires Max Min. Voltage @ 90/70 Including Fuse Circuit Comp. **Refrigerant Model Hz/Phase Lbs. Kg. BTUH Ground Size Amp s RLA Type Oz. Grams ICE0500*A1 115/60/1 461 210 10843 3 20 24.8* 18.5 R404A 37 1049 ICE0500*A-T1 115/60/1 455 207 10736 3 20 24.
ICE Series General Information Page A7 24 Hour Capacity Wires Max Min. Voltage @ 90/70 Including Fuse Circuit Comp. **Refrigerant Model Hz/Phase Lbs. Kg. BTUH Ground Size Amp s RLA Type Oz. Grams ICE1406*A1 208-230/60/1 1122 510 22590 3 30 20.2 13.8 R404A 108 3062 ICE1406*W1 208-230/60/1 1187 540 22529 3 20 15.
ICE Series General Information Page A8 50 hz. 24 Hour Capacity Wires Max Min. Voltage @ 90°/70° Including Fuse Circuit Comp. **Refrigerant Model Hz/Phase Lbs. Kg. BTUH Ground Size Amp s RLA Ty pe Oz. Grams ICE0305*A2 230/50/1 266 121 7079 3 15 12.4 8.
ICE Series General Information Page A9 Installation Guidelines Note: Installation should be performed by an Ice-O-Matic trained Service Technician. For proper operation of the Ice-O-Matic ice machine, the followi ng installation guidelines must be followed.
ICE Series General Information Page A10 Electrical and Plumbing Re quirements: ICEU150, ICEU220, ICEU205 and ICEU206.
ICE Series General Information Page A11 Electrical and Plum bing Requirements: ICEU150, 220, 225 and 226 Note: The ICEU150, ICEU220, ICEU22 5 and ICEU226 do not have a splash curtain. These models utilize a thermostatic bin control in place of a mechanical bin switch.
ICE Series General Information Page A12 Electrical and Plum bing Requirements: ICEU300 and 305 305 Note: The ICEU300 does not hav e a splash curtain. This model utilize a thermostatic bin control in place of a mechanical bin sw it c h .
ICE Series General Information Page A13 Electrical and Plumbing Requi rements: ICE0250, ICE0400, ICE0500, ICE0606, ICE0806 and ICE1006 (30 Inch Wide Cubers).
ICE Series General Information Page A14 Electrical and Plumbing Requirements: ICE1406, ICE1806, ICE2106 (48 Inch Wide Cubers) Prior to January 2008.
ICE Series General Information Page A15 Electrical and Plumbing Requi rements: ICE0320 and ICE0520 (22 Inch Wide Cubers).
ICE Series General Information Page A16 Electrical and Plumbing Requi rements: ICE1400, ICE1800 and ICE2100 Revision 3 (From January 2008).
ICE Series General Information Page A17 Electrical and Plum bing Requirements: ICE1506 Remote.
ICE Series General Information Page A18 Remote Condenser Installation For proper operation of the Ice-O-matic ice machine, the followi ng installation guidelines must be followed. Failure to do so may result in lo ss of production capacity, pr emature part failure, and may void all warranties.
ICE Series General Information Page A19 The following remote ice makers incorporate the mixing valve in the condenser. This configuration allows up to a 100 foot calculated remote line set run. Reference the diagram below to calculate the maximum 100 foot line set run.
ICE Series General Information Page A20 How the ICE Machine Works A general description of how the ICE Series cubers work is given below. The remainder of the manual provides more detail abo ut the components and systems.
ICE Series General Information Page A21 Undercounter Bin Removal-ICEU300 Series The storage bin can be removed by: 1 Remove the lower grill. 2. Remove two screws secu ring bin to cabinet base. 3. Remove the thumbscrews fr om the back wall of the bin. 3.
ICE Series General Information Page A22 Undercounter Bin Removal-ICEU150/200 Series The storage bin can be removed by: 1. Remove the two screws at the rear of the top panel. 2. Remove the two screw s from the front panel. 3. Remove two screws secu ring bin to cabinet base.
ICE Series General Information Page A23 Warranty Information Every Ice-O-Matic machine is backed by a warrant y that provides both parts and labor coverage.
ICE Series General Information Page A24 Ice-O-Matic Parts and Labor Domestic & International L imited Warrant y Mile High Equipment LLC (the “Company”) warr ants Ice-O-Matic brand ice machines.
ICE Series Scheduled Maintenance Page B1 Maintenance Note: Maintenance should be performed by an Ice-O-Matic trained Service Technician. Electrical shock and/or injury from moving parts inside this machine can cause serious injury. Disconnect electrical supply to machine prior to performing any adjustments or repairs.
ICE Series Scheduled Maintenance Page B2 Cleaning and Sanitizing (continued) 5. Add recommended amount of approved Nickel Safe ice machine cleaner to the water trough according to label instructions on the container. 6. Initiate the wash cycle at the ICE/OFF/WASH switch by placing the switch in the “WASH” position.
ICE Series Winterizing Procedures Page B3 Winterizing Procedures Important! Whenever the ice machine is taken out of operat ion during the winter mont hs, the procedure below must be performed. Failure to do so may cause serious damage and will void all warranties.
ICE Series Cabinet Care Page B4 Cleaning stainless steel Commercial grades of stainless steel are susceptible to rusting. It is important that you properly care for the stainless steel surfaces of your ice machine and bin to avoid the possibility of rust or corrosion.
ICE Series Troubleshooting Trees Page C1 How To Use The Troubleshooting Trees The troubleshooting trees were developed to be used in conjunction with the service information in the sections that follow.
ICE Series Troubleshooting Trees Page C2 Troubleshooting Trees Table Of Contents Machine Does Not Run C3 Machine Runs, Does Not Make Ice C4 – C5 Slow Production (Cube Formation Good) C6 L o w S u c .
ICE Series Troubleshooting Trees Page C3 Machine Does Not Run Check for correct power supply to the machine YES NOT OK NO OK Is the selector switch set to ICE ? Check High Pressure Safety Control Chec.
ICE Series Troubleshooting Trees Page C4 Machine Runs, Does Not Make Ice YES GO TO PA GE C5 NO YES Is water running over the evaporator? Check for power to the compressor contactor coil Check contactor for bad contactor or coil.
ICE Series Troubleshooting Trees Page C5 Machine Runs, Does Not Make Ice (continued) HIGH OR NORMAL SUCTION Check refrigerant pressures, see page E1 If head pressure is also high, make sure Condenser .
ICE Series Troubleshooting Trees Page C6 Slow Production (Cube Formation Good) NO YES Does installation meet guidelines? Check refrigeration system, Section E Check for excessive head pressure OK Chec.
ICE Series Troubleshooting Trees Page C7 Low Suction Pressure NO YES Does installation meet guidelines? Check TXV for moisture based restriction Check for correct head pressure, see page E10 NO Check for refrigerant tubing restriction, crimps, etc.
ICE Series Troubleshooting Trees Page C8 High Suction Pressure NO YES Have you checked the “Slow Production” Tree? Evacuate and recharge system Check Hot Gas Valve, see page E5 NO Check for leakin.
ICE Series Troubleshooting Trees Page C9 Cubes Are Hollow YES Is the water temperature above 100°F (38°C)? Go to the “Poor Water Distribution Over Evaporator” Troubleshooting Tree, page C13 NO Y.
ICE Series Troubleshooting Trees Page C10 Uneven Bridge Thickness HIGH Make sure supply water temperature is below 100°F (38°C) Check for water leaking out of Purge Drain NO YES YES Problem in wate r sys t em , see pages D1 and D2.
ICE Series Troubleshooting Trees Page C11 Ice bridge Thickness Varies Cycle To Cycle NOT OK Is air and water temps consistent and with in guidelines? Check the Purge Valve for water leaks NO YES O K C.
ICE Series Troubleshooting Trees Page C12 Machine Produces Cloudy Ice Is water running evenl y across the evaporator? NO YES See “Poor Water Running Over Evaporator Troubleshooting Tree page C13 NO .
ICE Series Troubleshooting Trees Page C13 Poor Water Distribution Over The Evaporator YES Is the machine level? Check Water Distribution Tube for obstructions or improper assembly See Section D NO YES.
ICE Series Troubleshooting Trees Page C14 Machine Does Not Enter Harvest YES Will suction pressure drop below cut-in of Timer Initiate? Check Purge Valve to make sure it is not leaking, if it is repla.
ICE Series Troubleshooting Trees Page C15 Machine Enters Harvest, Then Returns To Freeze Prematurely YES Is the Harvest Assist working properly? See page F6 Check the Manual Purge Switch N ormally C losed contacts. See page F1 Purge Switch is defective OPEN Adjust as required or replace defective part Check High Temperature Safety Control.
ICE Series Troubleshooting Trees Page C16 Length Of Harvest Excessive YES Does the machine meet installation guidelines? Correct installation deficiency NO Check Harvest Assist Assembly for proper ope.
ICE Series Troubleshooting Trees Page C17 Ice Does Not Release From Evaporator YES Clean the Evaporator, see page B2 NO OK YES Level the machine Set proper bridge thickness, see page F4 Does water run.
ICE Series Troubleshooting Trees Page C18 Hot Evaporator, Low Suction And Discharge Pressure (Remote Only) YES Correct installation deficiency Does the machine have the proper refrigeration charge? NO.
ICE Series Water System Page D1 Water Distribution and Components Water enters the machine through the float valve located in the water trough . The water trough holds water used for ice making. The float valve is used to maintain the proper water level in the water trough.
ICE Series Water System Page D2 Water Distribution Tube Water is pumped to a distribution tube located at the t op of the evaporator and is used to distribute water evenly over the evaporator. The distri bution tube can be removed and dissembled for cleaning if the hole becomes plugged or if there is excessive miner al build-up in the water system.
ICE Series Water System Page D3 Water Splash Curtain The water splash curtain covers the evaporator to prevent water from splashing into the bin and is also used to actuate the bin switch. When the bin becomes full of ice, the splash curtain is held open when the ice drops off of the evaporator.
ICE Series Water System Page D4 Water Purge Valve When the machine enters the harvest cycle, the water pump continues to ru n and the purge valve opens. This allows mineral laden water to be pumped from the water trough to the drain. This helps keep the water system clean.
ICE Series Water System Page D5 Water Trough The water trough can be easily removed by the following procedures: Mounting Screws ICEU150/200 Models 1. Disconnect power to the ice machine. 2. Shut the water supply off to the ice machine. 3. Remove water splash curtains when applicable.
ICE Series Refrigeration System Page E1 Refrigerant Cycle and Components Before diagnosing the refrigeration system, it is very important that the refrigerant charge be correct. Whenever the refrigeration system has been opened, the filter-drier must be replaced and the proper refrigerant charge must be weighed in.
ICE Series Refrigeration System Page E8 Refrigerant Refrigerant in a high-pressure liq uid form is fed to an expansion valve where the refrigerant is reduced to a low-pressure liquid. Under this low pressure, the liquid will absorb heat from the evaporator causing the liquid to change to a vapor.
ICE Series Refrigeration System Page E3 Thermostatic Expansion Valve (TXV) The thermostatic expansion valve meters the flow of refrigerant into the evaporator changing its state from a high-pressure liquid to a low-pressure liquid. This drop in pressure causes the refrigerant to cool.
ICE Series Refrigeration System Page E4 Thermostatic Expansion Valve (Continued) A dual evaporator machine will have one TXV fo r each evaporator. If one TXV sticks open and the other is operating normally, the suction pressu re will be higher than normal and both evaporators will build thick ice.
ICE Series Refrigeration System Page E5 Note: Permanent discoloration of the evaporator plating is normal and will cause no problems with harvesting the ice or sanitary conditions. Befo re condemning the evaporator for plating problems, be certain it is not just discolo ration.
ICE Series Refrigeration System Page E6 Remote Condenser (Continued) If the airflow is restricted or the condenser is di rty, the head pressure will be excessive ly high, slow production will result and the compressor may overheat and eventually become damaged.
ICE Series Refrigeration System Page E7 Pump Down System (Remot e Only) The pump down system prevents li quid refrigerant from migrat ing to the evaporator and compressor during the off cycle and prevents the co mpressor from slugging or starting under an excessive load.
ICE Series Refrigeration System Page E8 Refrigerant Refrigerant in a high-pressure liq uid form is fed to an expansion valve where the refrigerant is reduced to a low-pressure liquid. Under this low pressure, the liquid will absorb heat from the evaporator causing the liquid to change to a vapor.
ICE Series Refrigeration System Page E9 If the refrigeration system is ex tremely wet, use radiant heat to raise the temp erature of the system. This action will cause the moistu re to vaporize at less of a vacuum.
ICE Series Refrigeration System Page E10 Electrical and Mechanical Specificat ions, “ICE ” Series 60 Cycle Machine Model Ref. Typ e Charge Ounces Back Press. Approx. Head Press. Approx. Timer Initiate Setting Cycle Time Approx. Minutes 70/50-90/70 Batch Weight Pounds Volt.
ICE Series Refrigeration System Page E11 Electrical and Mechanical Specificat ions, “ICE ” Series 60 Cycle Machine Model Ref. Typ e Charge Ounces Back Press. Approx. Head Press. Approx. Timer Initiate Setting Cycle Time Approx. Minutes 70/50-90/70 Batch Weight Pounds Volt.
ICE Series Refrigeration System Page E12 Model Ref. Typ e Charge Ounces Back Press. Approx. Head Press. Approx. Timer Initiate Setting Cycle Time Approx.
ICE Series Refrigeration System Page E13 Model Ref. Type Charge Ounces Back Press. Approx. Head Press. Approx. Timer Initiate Setting Cycle Time Approx.
ICE Series Refrigeration System Page E14 ICEU150A Ambients Refrigeration Pressures PSIG Compressor Temps °F Cycle Times °F Discharge Suction Discharge Suction Minutes' Seconds" Air/Water S.
ICE Series Refrigeration System Page E15 ICEU226A Ambients Refrigeration Pressures PSIG Compressor Temps °F Cycle Times °F Discharge Suction Discharge Suction Minutes' Seconds" Air/Water S.
ICE Series Refrigeration System Page E16 ICE0320W Ambients Refrigeration Pressures PSIG Compressor Temps °F Cycle Times °F Discharge Suction Discharge Suction Minutes' Seconds" Air/Water S.
ICE Series Refrigeration System Page E17 ICE0500W3 Ambients Refrigeration Pressures PSIG Compressor Temps °F Cycle Times °F Discharge Suction Discharge Suction Minutes' Seconds" Air/Water .
ICE Series Refrigeration System Page E18 ICE0606A3 Ambients Refrigeratio n Pressure s PSIG Compressor Temps °F Cycle Times °F Discharge Suction Discharge Suction Minutes' Seconds" Air/Wate.
ICE Series Refrigeration System Page E19 ICE0806W Ambients Refrigeration Pressures PSIG Compre ssor Temps °F Cycle Times °F Discharge Suction Discharge Suction Minutes' Seconds" Air/Water .
ICE Series Refrigeration System Page E20 ICE1006R Ambients Refrigeration Pressures PSIG Compressor Temps °F Cycle Times °F Discharge Suction Discharge Suction Minutes' Seconds" Air/Water S.
ICE Series Electrical System Page F1 Control Circuit All machines in this manual are electro-mechanical controlled; howev er the control circuitry on the single evaporator units diffe rs from the dual evaporator units and is detailed below.
ICE Series Electrical System Page F2 Compressor Check (Continued) If all starting components are good, check th e voltage from the common terminal of the compressor, making sure proper voltage is supplied to the compressor and all wiring is properly connected.
ICE Series Electrical System Page F3 Untimed Freeze Cycle During the freeze cycle the compressor, water pump and condenser fan motor(s) (if used) are running. On remote systems the liquid line solenoid is also energi zed, see Refrigeration System. As ice forms on the evaporator, the suction pressure drops.
ICE Series Electrical System Page F4 Timed Freeze When the freeze timer is energized, the machine is in the timed portion of the freeze cycle. The freeze timer will time out the remainder of the freeze cycle. Once the time has passed, the machine will enter the harvest cycle.
ICE Series Electrical System Page F5 Harvest Cycle Single Evaporator Machines Once the freeze timer has timed out, power is sent to relay 1 and the machine enters the harvest cycle. Once in harvest motor, the purge valve, hot gas valve and harvest motor are energized.
ICE Series Electrical System Page F6 Harvest Assist Assembly The harvest assist assembly has several purposes: to assist in moving the ice off of the evaporator, to control the length of harvest and to terminate harvest. When the machine enters harvest, power is sent to the harvest motor which turns a slip clutch.
ICE Series Electrical System Page F7 Probe Tip and Swivel The probe tip is attached to the clutch and makes contact with the back of the ice slab during harvest. The swivel allows the probe tip to pivo t as the clutch turns so that the probe is pushed straight through the evaporator probe guide.
ICE Series Electrical System Page F8 Cam Switch Adjustment Check the cam switch for proper adjustment by slowing turning the clutch by hand in a counterclockwise direction while listening for the switch contacts to change. The switch should have an audible “click” as the roller reaches the high part of the cam.
ICE Series Electrical System Page F9 Undercounter machines: A thermostatic bin control is used on the undercounter models. The bin thermostat is located in the c ontrol box with a capillary tube, wh ich is in a brass thermo-well mounted to the water trough.
ICE Series Electrical System Page F10 Electrical Sequence for the ICE1400 Series Version 3 , ICE1800 Series Version 3 and the ICE2100 Series Version 3 Cubers. (Manufactured from January, 2008) ICE1400A/W3, 1800W3 and 2100W3 Electrical Se quence (Includes 50 hz.
ICE Series Electrical System Page F11 Electrical Sequence for the ICE1400 Series Version 3 , ICE1800 Series Version 3 and the ICE2100 Series Version 3 Cubers. (Manufactured from January, 2008) ICE1400R3, 1800R3 and 2100R3 Electrical Sequence (Includes 50 hz.
ICE Series Electrical System Page F12 Electrical Sequence for theICE1506 Series Version 3 (Manufactured from January, 2008) This unit incorporates a timer upstream of the Low Pressure Control for Low Ambients.
ICE Series Wiring Diagram Page G1 ICEU150/200/205/206 Air and Water Wiring Diagram.
ICE Series Wiring Diagram Page G2 ICEU150/200/205/206 Air and Water Wiring Schematic.
ICE Series Wiring Diagram Page G3 ICEU150/220/225/226 Air and Water Wiring Diagram.
ICE Series Wiring Diagram Page G4 ICEU150/220/225/226 Air and Water Wiring Schematic.
ICE Series Wiring Diagram Page G5 ICE0250 Air and Water Wiring Diagram.
ICE Series Wiring Diagram Page G6 ICE0250 Air and Water Wiring Schematic.
ICE Series Wiring Diagram Page G7 ICE0400 Air and Water Wiring Diagram.
ICE Series Wiring Diagram Page G8 ICE0400 Air and Water Wiring Schematic.
ICE Series Wiring Diagram Page G9 ICE0405/0406 Air and Water Wiring Diagram.
ICE Series Wiring Diagram Page G10 ICE0405/0406 Air and Water Wiring Schematic.
ICE Series Wiring Diagram Page G11 ICE0500 Air and Water Wiring Diagram.
ICE Series Wiring Diagram Page G12 ICE0500 Air and Water Wiring Schematic.
ICE Series Wiring Diagram Page G13 ICE0500 Remote Wiring Diagram.
ICE Series Wiring Diagram Page G14 ICE0500 Remote Wiring Schematic.
ICE Series Wiring Diagram Page G15 ICE0605/0606/0805/0806/1005/ 1006 Air and Water Wiring Diagram.
ICE Series Wiring Diagram Page G16 ICE0605/0606/0805/0806/1005/ 1006 Air and Water Wiring Schematic.
ICE Series Wiring Diagram Page G17 ICE0605/0606/0805/0806/ 1005/1006 Remote Wiring Diagram.
ICE Series Wiring Diagram Page G18 ICE0605/0606/0805/0806/ 1005/1006 Remote Wiring Schematic.
ICE Series Wiring Diagram Page G19 ICE1007 Air and Water Wiring Diagram.
ICE Series Wiring Diagram Page G20 ICE1007 Air and Water Wiring Schematic.
ICE Series Wiring Diagram Page G21 ICE1007 Remote Wiring Diagram.
ICE Series Wiring Diagram Page G22 ICE1007 Remote Wiring Schematic.
ICE Series Wiring Diagram Page G23 ICE1405/1406/1806/2005/ 2106 Air and Water Wiring Diagram.
ICE Series Wiring Diagram Page G24 ICE1405/1406/1806/2005/2106 Air and Water Wiring Schematic.
ICE Series Wiring Diagram Page G25 ICE1405/1406/1806/2005/2106 Re mote Wiring Diagram.
ICE Series Wiring Diagram Page G26 ICE1405/1406/1806/2005/2106 Remo te Wiring Schematic.
ICE Series Wiring Diagram Page G27 ICE1407/1807/2107 Air and Wa ter Wiring Diagram.
ICE Series Wiring Diagram Page G28 ICE1407/1807/2107 Air and Wa ter Wiring Schematic.
ICE Series Wiring Diagram Page G29 ICE1407/1807/2107 Remote Wiring Diagram.
ICE Series Wiring Diagram Page G30 ICE1407/1807/2107 Remote Wiring Schematic.
ICE Series Wiring Diagram Page G31 ICE1606 Remote Wiring Diagram.
ICE Series Wiring Diagram Page G32 ICE1606 Remote Wiring Schematic.
ICE Series Wiring Diagram Page G33 ICE0320 Air and Water Wiring Diagram.
ICE Series Wiring Diagram Page G34 ICE0320 Air and Water Wiring Schematic.
ICE Series Wiring Diagram Page G35 ICE0520 Air and Water Wiring Diagram.
ICE Series Wiring Diagram Page G36 ICE0520 Air and Water Wiring Schematic.
ICE Series Wiring Diagram Page G37 ICE0325/0525 Air and Water Wiring Diagram.
ICE Series Wiring Diagram Page G38 ICE0325/0525 Air and Water Wiring Schematic.
ICE Series Wiring Diagram Page G39 ICE0305 Air and Water Wiring Diagram.
ICE Series Wiring Diagram Page G40 ICE0305 Air and Water Wiring Schematic.
ICE Series Wiring Diagram Page G41 ICE1506 Remote.
ICE Series Wiring Diagram Page G42 ICE1506 Remote.
ICE Series Wiring Diagram Page G43 ICEU300 Air and Water.
ICE Series Wiring Diagram ICEU300 Air and Water Page G44.
ICE Series Wiring Diagram Page G45 ICEU305 Air and Water.
ICE Series Wiring Diagram Page G46 ICEU305 Air and Water.
ICE Series Wiring Diagram Page G47 ICE0500 Remote Wiring Diagram (R3).
ICE Series Wiring Diagram Page G48 ICE0500 Remote Wiring Schematic (R3).
ICE Series Wiring Diagram ICE0605/0606/0806/1006 Remote Wiring Diagram (R3) Page G49.
ICE Series Wiring Diagram Page G50 ICE0605/0606/0806/1006 Remote Wiring Schematic (R3).
ICE Series Wiring Diagram Page G51 ICE1007 Remote Wiring Diagram (R3).
ICE Series Wiring Diagram Page G52 ICE1007 Remote Wiring Schematic (R3).
ICE Series Wiring Diagram Page G53 ICE0250 Air4 and Water4, ICE0400 Ai r3 and Water3 Wiring Diagram.
ICE Series Wiring Diagram Page G54 ICE0250 Air4 and Water4, ICE0400 Ai r3 and Water3 Wiring Schematic.
ICE Series Wiring Diagram Page G55 ICE0320 Air3 and Water3, ICE0520 Ai r3 and Water3 Wiring Diagram.
ICE Series Wiring Diagram ICE0320 Air4 and Water4, ICE0520 Ai r3 and Water3 Wiring Schematic Page G56.
ICE Series Wiring Diagram Page G57 ICE0406/405 Air3 and Water3, ICE0305 Air3 and Water3 Wiring Diagram.
ICE Series Wiring Diagram Page G58 ICE0406/405 Air3 and Water3, ICE0305 Air3 and Water3 Wiring Schematic.
ICE Series Wiring Diagram Page G59 ICE0325 Air3 and Water3, ICE0525 Ai r3 and Water3 Wiring Diagram.
ICE Series Wiring Diagram ICE0325 Air3 and Water3, ICE0525 Ai r3 and Water3 Wiring Schematic Page G60.
ICE Series Wiring Diagram ICE0500 Air3 and Water3 Wiring Diagram Page G61.
ICE Series Wiring Diagram Page G62 ICE0500 Air3 and Water3 Wiring Schematic.
ICE Series Wiring Diagram Page G63 ICE0500 Remote4 Wiring Diagram.
ICE Series Wiring Diagram Page G64 ICE0500 Remote4 Wiring Schematic.
ICE Series Wiring Diagram ICE0606 Air3 and Water3, ICE0605 Ai r3 and Water3 Wiring Diagram Page G65.
ICE Series Wiring Diagram Page G66 ICE0606 Air3 and Water3, ICE0605 Air3 and Water3.
ICE Series Wiring Diagram ICE0606 Remote4 and ICE0605 Remote4 Wiring Diagram Page G67.
ICE Series Wiring Diagram Page G68 ICE0606 Remote4 and ICE0605 Remote4 Wiring Schematic.
ICE Series Wiring Diagram Page G68 ICE0606 Remote4 and ICE0605 Remote4 Wiring Schematic.
ICE Series Wiring Diagram ICE1405/6A3/W3, ICE1806W3 and ICE2106W3 Wiring Diagram Page G69.
ICE Series Wiring Diagram Page G70 ICE1405/6A3/W3, ICE1806W3 and ICE2106W3 Wiring Schematic.
ICE Series Wiring Diagram ICE1407A3/W3, ICE1807W3 and ICE2107W3 Wiring Diagram Page G71.
ICE Series Wiring Diagram Page G72 ICE1407A3/W3, ICE1807W3 and ICE2107W3 Wiring Schematic.
ICE Series Wiring Diagram Page G73 ICE1405/6R3, ICE1806R3 and ICE2106R3 Wiring Diagram.
ICE Series Wiring Diagram Page G74 ICE1405/6R3, ICE1806R3 and ICE2106R3 Wiring Schematic.
ICE Series Wiring Diagram Page G75 ICE1407R3, ICE1807R3 and ICE2107R3 Wiring Diagram.
ICE Series Wiring Diagram Page G76 ICE1407R3, ICE1807R3 and IC E2107R3 Wiring Schematic.
ICE Series Wiring Diagram Page G77 ICE1506R3 Wiring Diagram.
ICE Series Wiring Diagram Page G78 ICE1506R3 Wiring Schematic.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Ice-O-Matic ICE0250 Series c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Ice-O-Matic ICE0250 Series - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Ice-O-Matic ICE0250 Series, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Ice-O-Matic ICE0250 Series va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Ice-O-Matic ICE0250 Series, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Ice-O-Matic ICE0250 Series.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Ice-O-Matic ICE0250 Series. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Ice-O-Matic ICE0250 Series ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
