Manuel d'utilisation / d'entretien du produit PPC-1510PT du fabricant IBM
Aller à la page of 50
- 1 - Use r ’ s Manual PPC - 1510P T 15.1” TFT Low Power 667Mhz Panel PC.
- 2 - Ⅰ . Pictures of PPC - 1 57T Silver (Stainless Steel Color) VESA - 75 VESA - 100 I/O ports.
- 3 - Ⅱ . Panel PC Specifications ◆ Display - 15.1" color TF T flat panel ◆ Displa y Type - TFT LCD panel ◆ Luminance – 200 - 250 cd/m2 brightness luminance ◆ CPU - P - III equivalent.
- 4 - Ⅲ . Power Supply Input : 100 - 240 VAC ~ 2A 50/60Hz DC Output : +5V/7A, +12V/1.5A - 12V/0.3A, +5Vsb /0.75A Ⅳ . NAGASAKI Panel PC Comparison table Model no.
- 5 - Ⅴ . Touch Panel 1. Application 2. Warranty 3. Features 4. Characteristics 4.1 Usable Temperature Range 4.2 Storage Temperature Range 4.3 Input Method 5. Electrical Specifications 5.1 Linearity 5.2 Insulation Resistance 5.3 Chattering Time 6. Mechanica l Specifications 6.
- 6 - 11. Cautions 1. Application : This specification is applied to 6wire Touch Panel. 2. Warranty : TOUCH PANEL products manufactured to this specification shall be capable of meeting all characteri.
- 7 - 7. Optical Specifications 7.1 Light Transmittance ( Total Transm ittance) ： More than 78% （ Measuring apparatus ： Haze meter - made by BYK - Gardner Type ： Haze – Gard - plus 4726 Illuminant ： CIE - A Standard ： ASTM D 1003 ） 8. Reliability Item No.
- 8 - 10.2 Criterion The followings are applied to viewing area The item 10.2 (1,2,3,4) should apply to the VA (view area) unless none VA affect electrical performance (1) Scratch W i d t h 0 . 1 m m a n d l e n g t h 2 0 m m ≦ ≦ ： Accept . Width > 10 mm or Length > 20mm ： Reject (2) Granular foreign object D i a m e t e r 0 .
- 9 - Ⅵ . NASA - 6109 User ’ s Manual Copyright Notice The content of this manual has been checked for accurac y . The manufacturer assumes no responsibility for any inaccuracies that may be contained in this manual.
- 10 - CPU Supporting Embedded VIA EDEN ESP5000 (533MHz) or VIA c3 800MHz CPU LAN Adapter Realtek 8139C or Intel 82559ER Audio Adapter *Optional VGA Adapter On chip 2D/3D Graphic Controller w/ SMA up to 8MB LCD Supporting TFT TTL LCD optional LVDS l ROM - Disk Socket Yes (2 - 288MB) TV - Out Optional I/O Port 4S/2P IDE Interface U.
- 11 - with the option of the higher performed VIA C3 800MHz CPU. For e asier assembly and better integration without arranging array of cables, NASA - 6109 provides onboard connectors with a si milar conventional ATX layout. NASA - 6109 provides the option of integrating Watch Dog Timer for ideal unattended terminals.
- 12 - ◆ Windows 95 OSR - 2 VXD and integrated Windows 98 / NT5 miniport driver support ◆ BIOS shadow at 16KB increment ◆ Supports 2, 4 and 8 Mbytes of Frame Buffer with share memor y.
- 13 - ◆ LCD cable (Optional) ◆ IDE Driver includes: Drivers for Windows NT 3.x / 4.x, Windows 95, 98, 2000, Win Me, Linux, Novell Netware and AMI FLASH ROM utilities.
- 14 - Chapter 2 . Setting up the 6109 CPU board Jumpers and Connectors Jumpers/Connectors Overview: Function Jumpers/Connectors Cooling Fan Connector JFAN1, JFAN2 Power Supply: Power Good JP12: Pin 9.
- 15 - Function Jumpers/Connectors External Speaker JP12: Pin 3, Pin 6 Buzzer On/Off JP12: Pin 4, Pin 5 Hardware Reset Switch JP12: Pin 7, Pin 8 External Power Good JP12: Pin 9, Pin 10 Internal Power .
- 16 - JP9 (COM1, 2) / JP4 (COM3, 4) Voltage Selector: Voltage COM1(JP9) COM2(JP9) COM3(JP4) COM4(JP4) +12V(dc) 1 - 2 7 - 8 1 - 2 7 - 8 R.I. 3 - 4 9 - 10 3 - 4 9 - 10 +5V(dc) 5 - 6 11 - 12 5 - 6 11 - .
- 17 - 7 - 8 Hardware RESET Reserved 9 - 10 10 - 11 Reserved 12 - 13 ATX Power On/Off 14 - 15 Power LED (14:LED+, 15:LED - ) Close for PS/2 Power 16 - 17 17 - 18 Close for ATX Power 19 - 20 Close: Enable WDT functio n J1: IR Pin Header. Pin No. Function 1 +5V(DC) 2 N.
- 18 - 17 JBCY 18 JAB2 19 JBCX 20 JAB1 21 JACY 22 JBB2 23 JACX 24 JBB1 25 MSO 26 MSI CN7: Pin Header for PS2 KB / MS Pin No. Signal (KB) Pin No. Signal(MS) 1 KB Data 2 MS Data 3 KEY 4 KEY 5 GND 6 GND 7 +5V(DC) 8 +5V(DC) 9 KB_CLK 10 MS_CLK Printer (LPT1/LPT2) Port Pin No.
- 19 - Close for Normal Type * Caution: Improper setting will damage LCD panel. C N5: LCD - LVDS Output. Pin No. Signal Pin No. Signal 1 Y0 - 2 Y2 - 3 Y0+ 4 Y2+ 5 Y1 - 6 Rc v . Voltage 7 GND 8 Y3 - 9 Y1+ 10 Y3 11 CK - 12 VDD_PNL 13 CK+ 14 DISP_OFF 15 VBL 16 GND LCD_CON1: TFT LCD Panel Port Pin No.
- 20 - 31 FPD 1 32 FPD 0 33 GND 34 GND 35 P_CLK 36 FLM 37 DE 38 LP 39 GND 40 PBKL 41 PNKL 42 KEY 43 VCC 44 VCC * Please make sure the Pin 1 location before inserting the LCD connector.
- 21 - There are two different riser cards that can be fitted to NASA - 6109 CPU board. The first one is a 98pin ISA only Bus riser card (traditional IS A Bus riser card), the second one is a 188pins PCI/IS A riser card. P lease note: PCI/IS A riser cards jumper settings have to be matched with the motherboard INT/AD - select jumper.
- 22 - An IRQ number is automatically assigned to PCI expansion cards after those used by Legacy and PnP IS A cards. In the PCI Bus design, the BIOS is automatically assigned an IRQ to a PCI slot that has a card in it which requires an IRQ.
- 23 - Chapter 3. AMI BIOS SETUP AMI BIOS Setup Main Menu Standard CMOS Setup Advanced CM OS Setup Advanced Chipset Setup Power Management Setup PCI / Plug and Play Setup Peripheral Setup Hardware Mon.
- 24 - Choose “ Auto Configuration with Optimal Setting ” from the menu for loading the defaults parameters that is set by the manufacturer for the most stable normal configuration. Press F10 or “ Save Setting and Exit ” to save the changes and reboot the system.
- 25 - D400, 16k Shadow Disabled D800, 16k Shadow Disabled DC00, 16k Shadow Disabled S.M.A.R. T . For Hard Disks Set this option to “ Enabled ” to permit AMIBIOS to use the SMART (System Management System Management and Reporting Technologies) protocol for reporting server system information over a network.
- 26 - AGP Mode 4x AGP Read Synchronization Enabled AGP Fast Write Disabled AGP Aperture Size 128MB AGP Master 1 W/S Write Disabled AGP Master 1 W/S Read Disabled PCI Delay Transaction Enabled USB Con.
- 27 - This function allows adjusting AGP Aperture Size from 2MB to 256MB to increased VG A performance. AGP Master 1 W/S Write Allows you to enable / disable the AGP Master Write with 1 wait state AG.
- 28 - SB IRQ Select 5 SB DMA Select 1 MPU - 401 Enabled MPU - 401 I/O Address 330h - 333h FM Port (388h - 38Bh) Enabled Game Port (200h - 207h) Enabled Onboard FDC Set th is option to “ Enabled ” to enable the floppy drive controller on the motherboard.
- 29 - EPP Version This option s pecifies the Enhanced Parallel Port specification version number that is used in the system. This option only appears if the Parallel Port Mode option is set to EP P . The settings are 1.7 or 1.9. Parallel Port IRQ This option spe cifies the IRQ used by the parallel port.
- 30 - Allows you to Enable / Disable onboard MIDI port, Game Port (200h - 270h) This option allows configuring onboard Game port address. The choices: Disabled; 200h; 207h 3 - 6.
- 31 - This o ption specifies the power conserving state that the hard disk drive enters after the specified period of hard drive inactivity has expired. The settings are Disabled, Standb y , or Suspend. Standby/Suspend Timer Unit This option specifies the unit of time used for the Standby and Suspend timeout periods.
- 32 - DMA Channel 6 PnP DMA Channel 7 PnP IRQ3 ISA/EIS A IRQ4 SA/EISA IRQ5 PCI/PnP IRQ7 ISA/EIS A IRQ9 PCI/PnP IRQ10 PCI/PnP IRQ 11 PCI/PnP IRQ14 PCI/PnP IRQ15 PCI/PnP Plug and Play Aware O/S Set this option to Yes to inform AMIBIOS that the operating system can handle plug and Pla y (PnP) devices.
- 33 - These options allow you to specify the bus type used by each DMA channel. The settings are PnP or ISA/EISA . 3 - 8. Hardware Monitor Setup Provide some info rmation such as CPU temperature, speed of cooling fan and usage voltage of CPU for use r.
- 34 - external LVDS transmitters to support TFT LCD Panel with LVDS built - in. The flat panel interface provides or supports the following f unctions for various panels: - Generates flat panel inter.
- 35 - JP15 Memory Address 1 - 2 0C800H - 0C9FFH 1 - 2 0CC00H - 0CDFFH 3 - 4 0DCCCH - 0D1FFH 3 - 4 0D400H - 0D5FFH 5 - 6 0D800H - 0D9FFH 4 - 5. Driver Utility Installation Guide 1.
- 36 - 4. Select VI A 4in1 service pack driver install to the system 5. The Screen will appear VIA 4in1 driver setup screen, please press “ NEXT ” to continue. Please follow the steps instructed by each screen for the installation of the VI A 4in1 driver.
- 37 - Chapter 5 . LAN Adapter The on - board LAN adapter use of Single Chip Fast Ethernet Controlle r , that is highly integrated and requires no “ glue ” logic external memory on board. It runs in the bus master mode and directly sending/receiving Ethernet packet to/from memor y .
- 38 - Twisted Pair Number Pin Number Signal Description To Pin Number Signal Description 1 1 2 TD+ TD - à 1 2 TD+ TD - 2 3 6 RD+ RD - à 3 6 RD+ RD - RJ - 45 Connector Pin Assignments Figure A - 1 shows the RJ - 45 Connector pin ass ignments 5 - 3.
- 39 - 10Mbps network onl y. - Category 5 cable is also good for 10Mbps operation. Use UTP Category 5 cable for the versatility to operate the network at either 100Mbps or 10Mbps speed without changing cable. - Two pairs of wiring are required. - Depending on building codes, different insulation materials may be required.
- 40 - 5 - 7. LED Indicators The system board comes with two LED indicators on the edge of the motherboard that indicates the network system status. If you experience any problems with the adapte r , .
- 41 - >> A: REST8139.EXE <ENTER> 1. View Current Configuration This allows you to find the PCI Fast Ethernet adapter current configuration in your system.
- 42 - Software Installation Examples Before installing the driver programs, please refer to each directory that contains a README file, which provides detailed installation instructions, or to execu te the HELP8139.
- 43 - ---- Screen Message ---- DOS/4G Protected Mode Run - time Version 2.01a Copyright © Tenberry Softwar e, Inc. 1996 Please wait for loading BIOs ROM …. AMI Flash Utility V8.27.25 Flash ROM Programming report Chipset Vendor Chipset Code ROM Filename Boot Block Programming : VIA : VIA686A/B : xxxx.
- 44 - D - SUB Type Connector for COM port (RS232); Pin No. Description Pin No. Description 1 DCD 6 DSR 2 RX D 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 GND Box Header Type Connector for COM port (RS232); Pin No. Description Pin No. Description 1 DCD 2 DSR 3 RXD 4 RTS 5 TXD 6 CTS 7 DTR 8 RI 9 GND 10 N.
- 45 - Pin No. Description Pin No. Description 2 GREEN 10 GND 3 BLUE 11 N.C 4 N.C 12 DDC D AT 5 GND 13 H.Sync 6 GND 14 V .Sync 7 GND 15 DDC CLK 8 GND FDD Connector Pin No. Description Pin No. Description 1,3,5,7 GND 14 DSA# 9, 11,13 GND 16 MOB# 15,17,19 GND 18 DIR 21,23,25 GND 20 STEP# 27,29,31 GND 22 WD# 33 GND 24 WE# 2 RWC# 26 TRAK0 4,6 N.
- 46 - 11 CK - 12 VDD_PNL 13 CK+ 14 DIS P_OFF 15 VBL 16 GND TFT LCD Panel Port Connector (LCD - CON1) Pin No. Signal Pin No. Signal 1 VBL 2 VBL 3 GND 4 GND 5 VDDLCD 6 VDDLCD 7 ENPVEE 8 GND 9 FPD 23 10.
- 47 - USB PORT Pin No. D escription 1 2 USB VCC 3 4 USB D ATA - (0,1/2,3) 5 6 USB D AT A+(0,1/2,3) 7 8 USB_GND 9 10 USB_GND Audio Output Port Connector (CN1) Pin No. Function Pin No. Function 1 BITCLK 2 GND 3 SDIN 4 N.C. 5 SDIN2 6 N.C. 7 SDOUT 8 N.C.
- 48 - IDE1, IDE2 Connector Pin No. Des cription Pin No. Description 2,19,22 GND 13 IDE data2 24.26.30 GND 14 IDE data13 40 GND 15 IDE data1 20,21,28 N.
- 49 - Pin No. Description A Description B Description E Description F 11 AEN - SMEMW GND GND 12 SA19 - SMEMR PCLKE - REQ1 13 SA18 - IOW GND AD31 14 SA17 - IOR AD30 AD29 15 SA16 - DACK3 PCLKG N.
- 50 - Pin No. Description C Description D Description G Description H 8 LA17 - DACK0 AD13 AD10 9 - MEMR DRQ0 AD 11 AD8 10 - MEMW - DACK5 AD9 AD7 11 SD8 DRQ5 - CBE0 AD5 12 SD9 - DACK6 AD6 AD3 13 SD10 .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté IBM PPC-1510PT c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du IBM PPC-1510PT - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation IBM PPC-1510PT, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le IBM PPC-1510PT va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le IBM PPC-1510PT, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du IBM PPC-1510PT.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le IBM PPC-1510PT. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei IBM PPC-1510PT ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
