Manuel d'utilisation / d'entretien du produit YTH180 du fabricant Husqvarna
Aller à la page of 52
YTH180 Owner’ s Manual.
2 Look for this symbol to point out impor- tant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED. SAFETY R ULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS.
3 PRODUCT SPECIFICA TIONS HORSEPOWER: 18.0 GASOLINE CAPACITY 3.5 GALLONS AND TYPE: UNLEADED REGULAR OIL TYPE (API-SF/SG): SAE 30 (above 32 ° F) SAE 5W-30 (below 32 ° F) OIL CAPACITY: W/ FILTER: 4.0 PINTS W/O FILTER: 3.5 PINTS SPARK PLUG: CHAMPION RV17YC (GAP: .
4 T ABLE OF CONTENTS INDEX SAFETY RULES ............................................................ 2 PRODUCT SPECIFICATIONS ...................................... 3 CUSTOMER RESPONSIBILITIES ..................... 3, 15-18 ASSEMBLY ..................
CONTENTS OF HARD W ARE P A CK 5 (2) Hex Bolts 1/4-20 x 3/4 (2) Washers 9/32 x 5/8 x 16 Ga. (2) Lock Washers 1/4 (2) Hex Nuts 1/4-20 (2) Wing Nuts 1/4-20 Parts packed separately in carton Part.
6 ASSEMBL Y STEERING WHEEL ADAPTER FIG. 1 Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor, all parts and hardware you assemble must be tightened securely.
7 ASSEMBL Y INSTALL SEAT (See Fig. 3) Adjust seat before tightening adjustment knob. • Remove cardboard packing on seat pan. • Place seat on pan and assemble shoulder bolt. • Assemble adjustment knob and flat washer loosely. Do not tighten. • Tighten shoulder bolt securely.
8 ASSEMBL Y INSTALL BATTERY (See Figs. 4 & 5) CAUTION: Do not short battery termi- nals. Before installing battery, remove metal bracelets, wristwatch bands, rings, etc. Positive terminal must be connected first to prevent sparking from acci- dental grounding.
9 ASSEMBL Y ✓ CHECKLIST BEFORE YOU OPERATE AND ENJOY YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT. PLEASE REVIEW THE FOLLOWING CHECKLIST: ✓ All assembly instructions have been completed.
10 OPERA TION KNO W Y OUR TRA CT OR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Our tractors conform to the safety standards of the American National Standards Institute. ATTACHMENT CLUTCH SWITCH : Used to engage the mower blades, or other attachments mounted to your tractor.
11 OPERA TION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recom- mend a wide vision safety mask for over the spectacles or standard safety glasses.
12 OPERA TION TO TRANSPORT (See Figs. 9 & 12) When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor. • Raise attachment lift to highest position with attach- ment lift control.
13 OPERA TION • When engine starts, slowly push choke control in. • Move throttle control to fast ( ) position. • Allow engine to warm up for a few minutes before engaging drive or attachments.
14 OPERA TION MOWING TIPS • Tire chains cannot be used when the mower housing is attached to tractor. • Mower should be properly leveled for best mowing performance. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual.
15 CUST OMER RESPONSIBILITIES BEFORE EACH USE ✔ ✔ ✔ ✔ ✔ T R A C T 0 R Adjust Motion Drive Belt(s) Tension Inspect Muffler/Spark Arrester Lubrication Chart Check Brake Operation Clean Air Fil.
16 CUST OMER RESPONSIBILITIES TRA CT OR Always observe safety rules when performing any mainte- nance. BRAKE OPERATION If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See "TO ADJUST BRAKE" in the Service and Adjust- ments section of this manual).
17 CUST OMER RESPONSIBILITIES BATTERY (See Fig. 18) Your tractor has a battery charging system which is suffi- cient for normal use. However, periodic charging of the battery with an automotive charger will extend it's life. • Acid solution level in each battery cell should be even with bottoms of vent wells.
18 CUST OMER RESPONSIBILITIES CLEAN AIR SCREEN (See Fig. 20) Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with a wire brush or compressed air to remove dirt and stubborn dried gum fibers. ENGINE COOLING FINS (See Fig.
19 SER VICE AND ADJUSTMENTS CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: • Depress clutch/brake pedal fully and set parking brake. • Place motion control lever in neutral (N) position. • Place attachment clutch in "DISENGAGED" position.
20 SER VICE AND ADJUSTMENTS NUT “E” TRUNNION NUT “F” FRONT LINKS FIG. 27 BOTH FRONT LINKS MUST BE EQUAL IN LENGTH FIG. 26 MANDREL “D” “D” TO LEVEL MOWER HOUSING Adjust the mower while tractor is parked on level ground or driveway. Make sure tires are properly inflated (See “PRODUCT SPECIFICATIONS” on page 3 of this manual).
21 SER VICE AND ADJUSTMENTS TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 28) The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake. BELT REMOVAL - • Remove mower from tractor (See “TO REMOVE MOWER” in this section of this manual).
22 SER VICE AND ADJUSTMENTS TO REPLACE MOTION DRIVE BELT (See Fig. 31) Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest. • Remove mower (See “TO REMOVE MOWER” in this section of this manual.
23 SER VICE AND ADJUSTMENTS WASHERS RETAINING RING SQUARE KEY WHEEL COVER (REARWHEELONLY) TO ADJUST STEERING WHEEL ALIGNMENT If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.
SER VICE AND ADJUSTMENTS 24 TO REPLACE FUSE Replace with 30 amp automotive-type plug-in fuse. The fuse holder is located in the engine compartment, directly in front of the dash. TO REPLACE HEADLIGHT BULB • Raise hood. • Pull bulb holder out of the hole in the backside of the grill.
25 SER VICE AND ADJUSTMENTS ACCELERATION TEST - • Move throttle control lever from slow ( ) to fast ( ) position. If engine hesitates or dies, turn idle mixture screw out (counterclockwise) 1/8 turn. Repeat test and continue to adjust, if necessary, until engine acceler- ates smoothly.
26 ST ORA GE Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. CAUTION: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark.
TROUBLESHOOTING POINTS 27 Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly. 2. See “TO START ENGINE” in Operation section. 3. Engine flooded. 3. Wait several minutes before attempting to start. 4. Bad spark plug.
TROUBLESHOOTING POINTS 28 PROBLEM CAUSE CORRECTION Engine continues to run 1. Faulty operator-safety presence control system. 1. Check wiring, switches and connections. If not when operator leaves seat corrected, contact an authorized service center/ with attachment clutch department.
29 18 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) SCHEMATIC BATTERY G B S L M IGNITION SWITCH FUSE 30 AMP. 2 3 4 IGNITION UNIT SPARK PLUGS RED BLUE BLUE 12.
30 REP AIR P AR TS 18 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) ELECTRICAL DEPRESS FOOT PEDAL DISENGAGE ATTACHMENT CHECK OIL FUEL 22 Comm Harness 141571 21 40 26 51 34 50 29 3.
31 REP AIR P ARTS 18 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) ELECTRICAL 1 532121537 Battery 2 874760412 Bolt, Hex Head 1/4-20 x 3/4 3 819091016 Washer 9/32 x 5/8 x 16 Gauge 4 810040400 .
32 REP AIR P ARTS 18 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) CHASSIS AND ENCLOSURES 81 3 2 3 38 39 35 26 3 3 13 35 26 33 10 34 1 3 11 3 59 9 15 64 76 25 26 71 69 71 70 82 83 84 24 26 91.
33 REP AIR P ARTS 18 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) CHASSIS AND ENCLOSURES 69 532106784 Strap Assembly, Hinge, Rear 70 532104618 Strap Assembly, Hinge, Front 71 873640400 Nut, .
34 REP AIR P ARTS 18 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) DRIVE 88 86 87 51 32 61 30 52 61 58 32 45 59 42 42 51 31 81 38 61 49 19 27 37 41 42 40 44 48 45 19 97 16 73 18 103 102 94 3 .
35 REP AIR P ARTS 18 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) DRIVE KEY PART NO. NO. DESCRIPTION KEY PART NO. NO. DESCRIPTION 1 532144436 Transaxle Assembly 2 532142431 Spring, Return, B.
36 REP AIR P ARTS 18 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) STEERING ASSEMBLY 5 9 5 7 7 9 4 33 35 34 33 3 34 35 32 43 6 43 8 17 18 19 22 21 20 8 27 23 11 12 24 29 25 5 8 10 12 11 11 38.
37 REP AIR P ARTS 18 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) STEERING ASSEMBLY KEY PART NO. NO. DESCRIPTION 1 532124415 Wheel Steering Auto Grey 2 532142033 Axle Asm Fr LT W/gzks 38/42 .
38 REP AIR P ARTS 118 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) SEAT ASSEMBLY KEY PART NO. NO. DESCRIPTION 16 532123740 Spring Cprsn 1 310 Blk Pnt 17 532123976 Nut Lock 1/4 Lge Flg Gr 5 Z.
39 REP AIR P ARTS 118 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) DECALS 11 14 9 10 3 8 4 14 7 5 2 1 532138956 Decal Instruction Dash Eng/fr 2 532132507 Decal HP Engine 3 532140855 Decal Ho.
40 REP AIR P ARTS 18 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) ENGINE 24 23 32 31 34 33 37 33 41 40 39 17 3 14 38 15 16 17 2 1 7 OPTIONAL EQUIPMENT Spark Arrester 29 35 36 10 8 9 4 11 .
41 REP AIR P ARTS 18 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) ENGINE KEY PART NO. NO. DESCRIPTION NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm 1 532137214 Control RH Blk Flg 37 88 2 817720410 Screw Hex Thd Cut 1/4-20x5/8 T 3 - - - - - - - - Engine Kohler, Model No.
42 REP AIR P ARTS 18 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) MOWER LIFT ASSEMBLY 44 15 20 16 17 18 20 20 15 20 4 5 6 2 3 1 6 5 4 7 8 10 21 22 23 24 25 26 27 28 29 30 46 48 42 43 47 45 1.
43 REP AIR P ARTS 18 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) MOWER LIFT ASSEMBLY KEY PART NO. NO. DESCRIPTION 1 532136971 Wire Asm Inner W/plunger 20 56 2 532136968 Shaft Asm Lift RH w/.
44 REP AIR P ARTS 18 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) 42" MOWER 15 14 12 13 11 10 9 8 16 68 30 31 32 33 35 54 34 55 56 40 40 17 1 46 44 21 22 24 25 26 27 2 28 29 23 21 21 21.
45 REP AIR P ARTS 18 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) 42" MOWER KEY PART NO. NO. DESCRIPTION KEY PART NO. NO. DESCRIPTION 1 532144393 Deck Asm MWR 42"weldment 2 8721405.
REP AIR P ARTS 18 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) HYDR O-GEAR TRANSAXLE - - MODEL NUMBER 310-0750 46.
47 REP AIR P ARTS 18 HP 42" TRA CT OR - MODEL NO . YTH180 (954001172A) HYDRO-GEAR TRANSAXLE - - MODEL NUMBER 310-0750 KEY PART NO. NO. DESCRIPTION 1 532142930 Housing, Lower 2 532142931 Assembly,.
48 SER VICE NO TES.
49 SER VICE NO TES.
50 15° MAX. SIGHT AND HOLD THIS LEVEL WITH SKY LINE OR TREE. CUT OUT ON DOTTED LINES THIS IS A 15° SLOPE SIGHTING GUIDE ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION Operate your Tractor up and down the face of slopes (not greater than 15°), never across the face.
51 Effective May 1, 1992 W ARRANTY ST A TEMENT (2) Failure to operate or maintain the unit in accordance with the Owner’s/Operator’s manual or instruction sheet furnished by Husqvarna.
532145464 07.15.94 Printed in U.S.A..
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Husqvarna YTH180 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Husqvarna YTH180 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Husqvarna YTH180, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Husqvarna YTH180 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Husqvarna YTH180, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Husqvarna YTH180.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Husqvarna YTH180. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Husqvarna YTH180 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
