Manuel d'utilisation / d'entretien du produit WHF6123 / 966947007 du fabricant Husqvarna
Aller à la page of 56
English Operator's Manual WHF5223 / 966947006 WHF6123 / 966947007 Please read the operator’ s manual car efully and mak e sur e you understand the instructions bef ore using the machine.
©2009 HTC. All rights reserved. Beatrice, NE. Printed in U.S.A. In order to implement improvements, specications and designs can be altered without prior notication. Note that no legal demands can be placed based on the information contained in these instructions.
CONTENTS INTRODUCTION ............................................................... 5 General ....................................................................... 5 Driving and T ransport on Public Roads ...................... 5 Operating .......
W ARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower .
INTRODUCTION Husqvarna-5 Congratulations Thank you for purchasing a Husqvarna W alk-Behind mower . This machine is built for superior efciency to rapidly mow primarily large areas. A control panel easily accessible to the operator and a transmission regulated by steering controls both contribute to the machine’s performance.
INTRODUCTION 6 - Husqvarna Good Service Husqvarna’s products are sold through out the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer .
SYMBOLS AND DECALS Husqvarna-7 These symbols are found on the machine and in the operator ’s manual. Study them carefully so that you know what they mean. W ARNING! Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx . IMPORT ANT INFORMA TION Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx.
SAFETY 8 - Husqvarna 801 1-632 Never take passengers These instructions are for your safety . Read them carefully . General Operation Read, understand, and follow all instructions • on the machine and in the manual before starting. Do not put hands or feet near rotating parts • or under the machine.
SAFETY Husqvarna-9 801 1-670a Personal protective equipment Personal Safety Equipment Make sure rst aid equipment is close at • hand when using the machine. Never use the machine when barefoot. • Always wear protective shoes or boots, preferably with steel toe caps.
SAFETY 10 - Husqvarna 801 1-635 Be extra cautious when driving on slopes 801 1-636 Never allow children to operate the machine Keep all movement on the slopes slow and • gradual. Do not make sudden changes in speed or direction, which could cause the machine to roll over .
SAFETY Husqvarna-1 1 801 1-637 Never ll the fuel tank indoors Safe Handling of Gasoline T o avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely ammable and the vapors are explosive. Extinguish all cigarettes, cigars, pipes, and • other sources of ignition.
SAFETY 12 - Husqvarna 801 1-638 Never operate the machine in an enclosed space General Maintenance Never operate machine in a closed area. • Keep all nuts and bolts tight to be sure the • equipment is in safe working condition. Never tamper with safety devices.
SAFETY Husqvarna-13 The machine is tested and approved only • with the equipment originally provided or recommended by the manufacturer . Only use approved repair parts for the machine. The mulch blades should only be used in • familiar areas when higher quality mowing is desired.
CONTROLS 14 - Husqvarna This operator ’s manual describes the Husqvarna W alk- Behind Mower . The machine is tted with a Kawasaki four-stroke overhead valve engine. Control Locations Fuel Cap/T ank 1. Throttle Control 2. Choke Control 3. Ground Speed Control 4.
CONTROLS Husqvarna-15 8062-003 Ignition key 8062-004 Drive levers Drive Levers The machine’s speed and direction are continuously variable using the two motion control levers. By releasing both controls an equal amount the machine moves in a straight line forward.
CONTROLS 16 - Husqvarna 8062-004 Operator presence levers Operator Presence Levers Located on the handle, the Operator Presence System levers serve as an additional safety feature. An electrical interlock safety system is activated by depressing either one or both of the Operator Presence Levers at the handle grips.
CONTROLS Husqvarna-17 Throttle Control The throttle control regulates the engine speed and thereby the rate of rotation of the blades, assuming the blade engagement control is engaged (pulled up). In order to increase or decrease the engine speed, the control is moved forward or backward respectively .
CONTROLS 18 - Husqvarna Blade Engagement Control The blade engagement control is on the center control panel. In order to engage the blades, pull the control upwards. The blades are disengaged when the lever is pushed down. 8062-003 Blade control Service Meter Optional The optional service meter displays the total operating time.
CONTROLS Husqvarna-19 W ARNING! Fill to bottom of ller neck. Do not overll. Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open ame.
OPERA TION 20 - Husqvarna The neutral locks for the drive levers should be in • locked position. Before Starting Read the sections on Safety and Controls before • starting the machine. Perform the daily maintenance before starting (see • Maintenance Schedule).
OPERA TION Husqvarna-21 8062-007 Fuel shut off valve - open Starting Engine Open fuel shut-off valve. 8062-010 Set throttle control Set throttle control at the lowest position and engage the choke (if needed). Do not use choke when the engine is warm.
OPERA TION 22 - Husqvarna 8062-005 Parking brake Release the parking brake by pivoting the pedal back and downwards until it clears the brake shaft. T urn ignition key to ON position.
OPERA TION Husqvarna-23 8062-004 Operator presence levers Running Depress one operator presence lever and move the speed control to the desired speed. Pull the blade engagement control upwards. Set the desired rpm with the throttle. The best cutting and bagging is obtained with engine at top rpm.
OPERA TION 24 - Husqvarna 8062-01 1 Mowing pattern 8062-012 Clean mower deck after each use Mowing Tips Observe and mark rocks and other xed objects in • order to avoid collisions. Properly level the cutting deck for best mowing • performance. The blades should be parallel to the ground or slightly tipped down in the front.
OPERA TION Husqvarna-25 T ransport The machine is heavy and can cause serious • crushing injuries. Be extra cautious when it is loaded on or unloaded from a vehicle or trailer .
OPERA TION 26 - Husqvarna 8062-003 Ignition key T urn the ignition key to the stop position. Remove the ignition key . 8062-007 Fuel shut off valve - closed (OFF) Shut OFF the fuel valve.
OPERA TION Husqvarna-27 Cutting Height Adjustment 8062-024 Remove spark plug wires 8062-034 1. Deck latch 2, Latch pin 3. Retainer pin 4. Height rod Height adjustment 1 2 3 4 IMPORT ANT INFORMA TION T o achieve the best quality cut, the blades should be level with the ground or slightly tipped forward.
MAINTENANCE 28 - Husqvarna Maintenance Schedule The following is a list of maintenance procedures that must be performed on the machine. For those points not described in this manual, visit an authorized service workshop.
MAINTENANCE Husqvarna-29 Maintenance Before After Daily Weekly At least once each year Maintenance interval in hours 25 50 100 300 Check/adjust throttle and choke cables Check the condition of belts, .
MAINTENANCE 30 - Husqvarna Ignition System The engine is equipped with an electronic ignition system. Only the spark plugs require maintenance. For recommended spark plugs, see T echnical 1. Data. Remove the ignition cable boot and clean around 2. the spark plug.
MAINTENANCE Husqvarna-31 Engine Cooling Air Intake Check that the engine’s cooling air intake is free from leaves, grass, and dirt. If the cooling air intake is clogged, engine cooling deteriorates, which can lead to engine damage.
MAINTENANCE 32 - Husqvarna Air Filter Heavy duty air lter If the engine seems weak or runs unevenly , the air lter may be clogged. If running with a dirty air lter , the spark plugs can become fouled.
MAINTENANCE Husqvarna-33 Replacing the Fuel Filter Replace the line-mounted fuel lter every 100 hours (once per season) or more regularly if it is clogged. T o replace the lter: Move the hose clamps away from the lter . Use 1. at-nosed pliers.
MAINTENANCE 34 - Husqvarna Tire Pressures All tires should be at 15 psi / 103 kPa / 1 bar . 8062-026 Tire pressures Deck belt Check every 100 hours of operation. Check for severe cracking and large nicks. NOTE: The belt will show some small cracks in normal operation.
MAINTENANCE Husqvarna-35 Cutting Blades W ARNING! Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling. IMPORT ANT INFORMA TION The sharpening of blades should be carried out by an authorized service workshop.
MAINTENANCE 36 - Husqvarna Cleaning Under side of rear deck Remove grass and debris. W ashing Regular cleaning and washing, especially under the mower deck, will increase the machine’s lifespan. Make it a habit to clean the machine directly after use, before the dirt sticks.
MAINTENANCE Husqvarna-37 General Remove the ignition key to prevent unintentional movements during lubrication. When lubricating with an oil can, it must be lled with engine oil. When lubricating with grease, unless otherwise stated, use a high grade molybdenum disulphide grease.
LUBRICA TION 38 - Husqvarna Cables If possible, grease both ends of the cables and move the controls to end stop positions when lubricating. Ret the rubber covers on the cables after lubrication. Cables with sheaths will bind if they are not lubricated regularly .
LUBRICA TION Husqvarna-39 Engine Oil 5. The engine oil should be changed for the rst time after 8 hours of operation. Thereafter , it should be changed every 100 hours. Place the machine on a at surface. Place a container under the engine where • the oil drain valve exits.
LUBRICA TION 40 - Husqvarna Engine Oil Levels Check the oil level in the engine when the machine is standing level and the engine is stopped. Remove the dipstick, wipe it clean, and then replace it. The dipstick should not be screwed into place. T ake the dipstick out again and read the oil level.
TROUBLESHOOTING Husqvarna-41 Problem Cause Engine will not start. • Mower deck control is engaged. • Speed control not in the start position. • Spark plug wire is off. • Contamination in the carburetor or fuel line. • Fuel shutoff valve is closed.
TROUBLESHOOTING 42 - Husqvarna Problem Cause • Clogged air intake. • Engine overloaded. • Poor ventilation around engine. • Defective engine speed regulator . • T oo little or no oil in the engine. • Fouled spark plugs. Engine overheats. Machine moves slowly , unevenly .
ST ORAGE Husqvarna-43 Winter Storage At the end of the mowing season (or if it will not be in use for longer than 30 days), the machine should be readied for storage. Fuel allowed to stand for long periods of time (30 days or more) can leave sticky residues that can plug the carburetor and disrupt engine function.
SCHEMA TICS 44 - Husqvarna Lower Harness 7.0 1.0 2.0 3.0 2.0 5.0 2.5 1.50 8.00 22.50 26.50 Red Violet Gray White Blue Black Red White Gray Violet White Red Red Wh it e B la ck CONVOLUTED TUBING OR NYL.
SCHEMA TICS Husqvarna-45 Upper Harness .50 6.50 9.50 3.00 3.00 4.50 2.50 .50 17.00 21.00 26.00 33.00 8.25 30.00 8.00 1.50 Brown B r o w n R e d G r e e n Re d Blac k Green Black Black Green Blue Whit .
TECHNICAL DA T A 46 - Husqvarna WH5223 WH6123 Engine Manufacturer Kawasaki Kawasaki T ype FH680V FH680V Power 23 hp* / 17.2 kW 23 hp* / 17.2 kW Oil capacity excluding lter 1.8 qt / 1.7 liter 1.8 qt / 1.7 liter Oil capacity including lter 2 qts / 1.
TECHNICAL DA T A Husqvarna-47 T orque Specications Engine crankshaft bolt 50 ft/lb (67 Nm) Deck pulley bolts 150 ft/lb (203 Nm) Lug nuts 75 ft/lb (100 Nm) Blade bolt 90 ft/lb (122 Nm) Standard ¼&q.
48 - Husqvarna CONFORMITY CERTIFICA TES USA requirements Labels are placed on the engine and/or in the engine compartment stating that the machine will fulll the requirements. This is also applicable to special requirements for any of the states, (California emission rules etc.
Husqvarna-49 SER VICE JOURNAL Action Date, mtr reading, stamp, sign Delivery Service Mount caster wheels. 1. □ Adjust tire pressure of all wheels according to T echnical Data. 2. □ Check that the right amount of oil is in the engine. 3. □ Adjust the position of the drive levers.
50 - Husqvarna SER VICE JOURNAL Action Date, mtr reading, stamp, sign 25-Hour Service Check the fuel pump air lter . 1. □ Check the tire pressures. 2. □ Check/clean the engine’s cooling air intake. 3. □ Clean the air cleaner ’s prelter (foam).
Husqvarna-51 SER VICE JOURNAL Action Date, mtr reading, stamp, sign 300-Hour Service Inspect the machine. Come to agreement with the customer 1. □ as to additional work to be carried out. Perform the 25-hour service. 2. □ Perform the 50-hour service.
52 - Husqvarna SER VICE JOURNAL Action Date, mtr reading, stamp, sign At Least Once Each Y ear Clean the engine’s cooling air intake (25 hours). 1. □ Replace the air cleaner ’s prelter (foam) (300 hours). 2. □ Replace the air lter paper cartridge (200 hours).
Husqvarna-53 SER VICE JOURNAL Action Date, mtr reading, stamp, sign.
.
.
P/N 1 15 149527 R1 08/15/09.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Husqvarna WHF6123 / 966947007 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Husqvarna WHF6123 / 966947007 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Husqvarna WHF6123 / 966947007, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Husqvarna WHF6123 / 966947007 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Husqvarna WHF6123 / 966947007, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Husqvarna WHF6123 / 966947007.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Husqvarna WHF6123 / 966947007. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Husqvarna WHF6123 / 966947007 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
