Manuel d'utilisation / d'entretien du produit ATHE100 du fabricant HTC
Aller à la page of 242
www.htc.c om P ock et PC Phone User Manual.
2 Please Read Before P roceeding THE BA TTERY IS NOT FULL Y CHAR GED WHEN Y OU T AKE IT OUT OF THE BO X. DO NOT REMO VE THE BA TTERY P ACK WHEN THE DEVICE IS CHARGING. Y OUR W ARRANT Y IS INV ALID A TED IF Y OU OPEN OR T AMPER WITH THE DEVICE’S OUTER CASING.
3 Macromedia, Flash, Macromedia F lash, Macromedia Flash Lit e and Reader are trademarks and/or register ed trademarks of Macromedia Netherlands, B.V . or Adobe Syst ems Incorporated. Copyright © 2006, JA T AA YU SOFT W ARE (P) L TD . All Rights Reserved.
4 Impor tant Health Informa tion and Safety Precautions When using this product, the safety precautions below must be taken t o avoid possible legal liabilities and damages. Retain and f ollow all product safety and operating instructions. Observe all warnings in the operating instructions on the product.
5 1. Delta, Model ADP-5FH X 2. T amura, Model JHA050100Uabb 3. Phihong, Models PSAA05X -050 and PSC05R-050 Car Adapter 1. Phihong, Model CLM10D-050 2. Hwa Ying , Model AP-03 • Handle battery packs carefully This product contains a Li-ion battery . There is a risk of fire and burns if the battery pack is handled improperly.
6 PREVENTION OF HEARING LOSS CAUTION: Permanent hearing loss may occur if earphones or headphones are used at high volume for prolonged periods of time.
7 are in progr ess. Areas with a poten tially explosive atmosphere ar e often, but not always, clearly marked. These include fueling areas, below deck on boats, fuel or chemical transf er or storage facilities, and areas wher e the air contains chemicals or particles, such as grain, dust, or metal powders .
8 NONIONIZING RADIA TION This product should be operated in the suggested normal condition only to ensure the radiativ e performance and safety of the inter ferenc e.
9 • Av oid using your devic e after a dramatic change in tempera ture When you mov e your device between envir onments with very different t emperature and/or humidity ranges, condensa tion may form on or within the device. T o av oid damaging the device, allow sufficient time for the moisture t o evaporate befor e using the device.
10 • For mag netic devices Please avoid putting an y media that contains magnets, e.g. mag netic card, credit car ds, bank cards , audio/video tape or magnetic memory devices, directly on the device or keyboard without any distanc e. It is highly recommended to put the media containing magnets in a security distance of at least 5 cm.
11.
12 C ont en ts Chapter 1 Getting Star ted 17 1.1 Getting to Know Y our Device and Its Ac cessories .......... 18 1.2 About the USIM/SIM Card and Batt ery ........................... 23 1.3 Starting Up ..................................................
13 Chapter 3 Using Phone F eatures 49 3.1 Using the Phone ............................................................... 50 3.2 Making a Call .................................................................... 51 3.3 Receiving a Call ...............
14 5.5 Backing Up Data ............................................................... 93 5.6 Protecting Y our Pock et PC Phone ................................... 96 5.7 Resetting Y our Pocket PC Phone ..................................... 98 Chapter 6 Getting Connected 101 6.
15 Chapter 8 Using GPS 157 8.1 Guidelines and Prepara tion for Using GPS ................... 158 8.2 Downloading Satellite Data via QuickGPS ................... 159 8.3 Using T om T om Navigat or ............................................... 161 8.4 GPS Contr ols .
16 Appendix 225 A.1 Regulatory Notices ......................................................... 226 A.2 PC Requirement to Run A ctiveSync 4.x ........................ 231 A.3 Specifications ............................................................
Chapt er 1 Getting Star ted 1.1 Getting to Know Y our Device and Its Ac cessories 1.2 About the USIM/SIM Car d and Battery 1.3 Starting Up 1.4 The T oday Screen 1.
18 Getting Started 1.1 Getting to Know Y our Device and Its Ac cessories 3 4 1 10 5 7 8 9 6 2 11 12.
Getting Started 19 No . Item Function 1 Na vigation Contr ol/ CENTER OK button Press this multi-directional control up , down, left, or right to move through menus and program instructions; carry out the selection by pressing the CENTER OK button. 2 Notification LED 1 This LED shows battery charging status.
20 Getting Started 15 16 20 21 13 17 18 19 14 24 25 23 22 26.
Getting Started 21 No . Item Function 13 Stylus Use the stylus to write, draw , or selec t items on the touch screen. 14 CAMERA Button Press to launch the C amera; press again to take a photo or video clip, depending on the specified capture mode . 15 Speaker Listen to audio files and voice calls her e.
22 Getting Started No . Item Function 27 QWERTY keyboard This is similar to a standard PC keyboard . Connect to the device to use the keyboard (Please see chapter 2).
Getting Started 23 No . Accessory Function 1 AC adapter Recharges the battery. 2 USB Sync cable Connects your device to a PC and synchroniz es data. 3 Stereo headset Provides a volume contr ol slider and a Send/End button. Press the Send/End button t o pick up a call or put a call on hold; press and hold the button to end the call.
24 Getting Started Battery life estimates (appro ximations): • Standby time: Up to 300 hours for GSM Up to 300 hours for UMT S. • T alk time (Screen off ): Up to 5.5 hours for GSM Up to 4.5 hours for UMT S. W arning! T o reduce risk of fire or burns: • Do not attempt to open, disassemble, or service the battery pack.
Getting Started 25 • Charging the device ’ s battery by using the power adapter . • Connecting your device to a PC via the pro vided USB Sync cable. W arning! • Do not remove the battery from the device while you ar e charging it using the AC or car adapter .
26 Getting Started When the keyboard is attached to the L CD screen, pressing the POWER button toggles between turning on and off the subdisplay screen. T o specify the timeout period before your devic e goes into Sleep mode 1. T ap Star t > Settings > System tab > P ow er > Advanc ed tab.
Getting Started 27 1.4 The T o day Screen The T oday screen displays important information, such as upcoming appointments and status indicators . Y ou can tap a section on the screen to open the associated program. • T o access the T oday screen, tap Start > T oday .
28 Getting Started 12 T ap to open Calendar. 13 T ap to open Contacts. 14 T ap to open Comm Manager. 15 T ap to open the Back light Settings screen. 16 T ap to open QuickGPS 17 T ap to open and configure TV Out settings. Indicators The following ar e some of the status icons that you ma y see on the device.
Getting Started 29 Icon Description 3G UMTS network available UMTS connecting UMTS in use GPRS available GPRS connecting GPRS in use EDGE available EDGE connecting EDGE in use Roaming Connection is ac.
30 Getting Started Icon Description Alarm No USIM/SIM card inserted VueFL O activated Battery is fully charged Battery power is very low Battery charging Bluetooth headset detected QuickGPS update not.
Getting Started 31 1 T ap to star t a recently-used program. 2 T ap to switch to the T oday screen. 3 T ap to star t a program. The items display ed in the Start menu can be customized by tapping Start > Settings > Personal tab > Menus . 4 T ap to view and selec t more programs that ar e installed on your device.
32 Getting Started 1.6 Using the P rograms The following ar e some of the programs that ar e already installed on your device. Icon Description ActiveSync S ynchronizes information between y our device and a PC or the Exchange Server . Adobe Reader LE Allows y ou to view PDF files.
Getting Started 33 Icon Description Internet Explorer Mobile Allows y ou to browse W eb and W AP sites as well as download new progr ams and files from the Internet. JETCET Print A llows you to print documents , image files, emails, W eb pages and more from your Ameo .
34 Getting Started Icon Description Sprite Backup Provides y ou with a quick and easy way to make backups of your data. STK (SIM T ool Kit) Ser vice Allows you t o access information and other services offered by your wireless service provider . Streaming Media Allows y ou to stream live or on-demand video.
Getting Started 35 1.7 Device Settings Y ou can adjust the device settings to suit the way you w ork. T o see all available settings, tap Start > Settings , then tap the Personal , S ystem , and Connections tabs located at the bottom of the scr een.
36 Getting Started Icon Description Certificates Shows information about c ertificates that are installed on your device. Clear Storage Remov es all your data and files from the memory and resets your device to factory default settings.
Getting Started 37 Icon Description T ask M anager Enables the “X” button to end running programs. TV Out Allows you to output the contents you ar e viewing on the device screen to an external display device.
38 Getting Started Icon Description Wi-F i Allows your devic e to scan for available wir eless networks. Wireless LAN Sho ws information about the active wireless network, and allows you to customiz e Wi-F i settings.
Chapt er 2 Entering and Searching for Inf ormation 2.1 Using the Har dware K eyboard 2.2 Entering Informa tion 2.3 Using the On-screen K eyboar d 2.4 Using L etter Recognizer 2.5 Using Block Rec ognizer 2.6 Using T ranscriber 2.7 Using S ymbol Pad 2.8 Using Not es to Dra w , W rite , and Record V oice Notes 2.
40 Entering and Searching for Information 2.1 Using the Hardw are K eyboard Y our device provides you with a QWERTY keyboard, which is similar to a standard keyboard on your PC. T o use the QWERT Y keyboard, attach the main unit to the keyboard (as shown in the image).
Entering and Searching for Information 41 Y ou can do the following with the QWERTY keyboard: • T o type lowercase letters, press the key s using your thumbs or fingers. • T o use all uppercase letters, press first, then press . T o change back to all lower case letters, press these buttons again.
42 Entering and Searching for Information 2.2 Entering Informa tion When you start a program or select a field that requires te xt or numbers, the Input Panel icon becomes a vailable on the menu bar .
Entering and Searching for Information 43 2.3 Using the On-screen K eyboard The on-screen K eyboard is available when text entry is possible. Y ou can enter text by tapping keys on the keyboard tha t are displayed on the screen. T o enter text using the on-screen K eyboard 1.
44 Entering and Searching for Information 2.5 Using Block Recogniz er With Block Recognizer , y ou use a single stroke to write letters , numbers, symbols, and punctuation, which are then conv erted into typed text. T o use Block Recognizer 1. Fr om a program, tap the Input Selector arrow , and tap Block Recognizer .
Entering and Searching for Information 45 T o enter punctuation and symbols T ranscriber comes with an on-screen keyboar d that provides an easy wa y to add punctuation or a special symbol to existing text. • Fr om a program, tap on the T ranscriber toolbar .
46 Entering and Searching for Information 2.7 Using S ymbol Pad Symbol Pad pr ovides a comprehensiv e list of common symbols such as parentheses, brackets , currency signs, and more , as well as punctuation marks and special characters. T ap to display the previous page of symbols.
Entering and Searching for Information 47 2.8 Using Notes t o Draw , Writ e, and Rec ord V oice Notes Using Notes , you can dra w directly on the screen, or write on the screen and save notes in y our own handwriting. Y ou can also creat e a stand-alone recording (v oice note) or you can add a r ecording to a note .
48 Entering and Searching for Information.
Chapt er 3 Using Phone F eatur es 3.1 Using the Phone 3.2 Making a Call 3.3 Receiving a C all 3.4 Making a V ideo Call 3.5 Receiving a Video C all 3.6 Smar t Dialing 3.
50 Using Phone F eatures 3.1 Using the Phone Like a standard mobile phone, y ou can use your device to make, r eceive , and keep track of calls and send SMS/MMS messages. Y ou can also dial directly from Contacts, and easily cop y phonebook entries from your SIM card to Contacts on your devic e.
Using Phone F eatures 51 Adjust the devic e volume 1. T ap the Speaker icon ( ). 2. Under V olume , do the following: • Adjust the phone volume ( ) or device volume ( ) by mo ving the slider to the desired volume lev el. • T ap On or O ff to change both the system and ringer volume settings.
52 Using Phone F eatures T alk button Phone screen Tip If you tap a wrong number , tap the Back arrow ( ) to erase each subsequent digit of a number . T o erase the entire number , tap and hold the Back arrow .
Using Phone F eatures 53 Make a call from Speed Dial Use Speed Dial to call frequently-used numbers with a single tap . F or example, if you assign a c ontact to the location 2 in Speed Dial, you can simply tap and hold on the Phone screen to dial the contact’ s number .
54 Using Phone F eatures 3.3 Receiving a Call When you receiv e a phone call, a message will appear , giving you the option to either answer or ignor e the incoming call. IMPORT ANT Y ou need to ha ve a wired or Bluetooth headset connected to your device to talk to or t o hear the other part y .
Using Phone F eatures 55 When the video call is unsuccessful, a message pops up asking you if you want to try again, make a voice call instead, or send an SMS/MMS message . Change V ideo Call settings While on a video call, you can change certain settings such as the size of the image, brightness of the image, the camera t o use, and more .
56 Using Phone F eatures Swap Image options Both parties (My video small) The other party's image is large while your image is small. This is the default setting. Both parties (My video large) The other party's image is small while your image is large.
Using Phone F eatures 57 • Last video frame . Uses the last video frame befor e you stopped the camera as your display image . • Video scr een preferenc e .
58 Using Phone F eatures 3.6 Smar t Dialing Smart Dialing is a program that makes it easy for you to dial a phone number . When y ou start entering numbers or characters, Smar t Dialing will automatic.
Using Phone F eatures 59 • Simply enter the first one or two digits to find a phone number in Call History. • Enter the first three digits or mor e if you want to find a phone number from the saved c ontacts on your device and SIM card. T o find a contact name Y ou can just enter the first letter of a contact’ s first name or surname.
60 Using Phone F eatures T ap and hold the contac t to pop up the shortcut menu • T o send a text message to the selected contact, tap and hold the contact, and tap Send T ext Message .
Using Phone F eatures 61 3.7 In-c all Options T o put a call on hold Y our device notifies you when you hav e another incoming call, and gives you the choice of rejecting or accepting the call .
62 Using Phone F eatures 3.8 Additional Dialing Informa tion Make an emergency call • Enter the international emergency number for y our locale, and tap T alk . Tip Additional emergency numbers may be included in your SIM card . Contact your service provider for details.
Using Phone F eatures 63 3. On the BT Remote SIM Acc ess screen, select the Remote SIM Acc ess check box then tap Done . 4. Connect the car kit phone to your device via Bluetooth.
64 Using Phone F eatures.
Chapt er 4 S ynchronizing Inf ormation and Setting Up E-mail S ecurity 4.1 Setting Up ActiveS ync 4.2 Synchr onizing Information 4.3 Synchr onizing via Bluetooth 4.
4.1 Setting Up ActiveS ync Microsoft ActiveSync synchroniz es information on your device with information on your PC, such as Microsoft Outlook content.
If you do not know the Exchange server address and the domain name, check with your network administrat or , or do the follo wing to find them in your computer: a. In Outlook, click T ools > E-mail Accounts . b . Select View or change existing e-mail accounts .
e. T o check the domain name, click Start > Settings > Control Panel , then double-click System . f . In the System Properties dialog box, click the Computer Name tab. Y ou will then see the domain name. 6. On your device, y ou also need to enter the Ex change server settings.
Information types on the PC and Exchange Server 9. Click Next . 10. Click F inish . When you finish the wizard , ActiveSync synchroniz es your device automatically .
4.2 Synchr onizing Information When you connect your device to the PC using a USB cable or a Bluet ooth connection, ActiveSync will immediately synchroniz e. While your devic e is connected, ActiveSync synchr onizes every time you make a change on either the PC or your device.
synchronizing with multiple computers , the items that you synchroniz e will appear on all of the computers with which they are synchr onized. F or example, if you ha ve set up synchronization with tw.
Synchroniz e Outlook information with Ex change Server Y ou can set up synchronization with Exchange Server on your device, if it is available to you thr ough your company or wir eless service provider .
Schedule synchronization with Ex change Server Y ou can schedule information to be synchronized automa tically between your device and the Exchange Server , or schedule synchronization at regular time intervals. Choose between these two methods, depending on your e-mail volume and which method you think is more cost-effective.
Using ActiveS ync to enable Direct Push 1. In ActiveSync on your device , tap Menu > Schedule . 2. Select As items arrive in the Peak times and Off-peak times bo xes.
4.3 Synchr onizing via Bluetooth Y ou can connect and synchronize your device with the PC using Bluetooth. T o synchronize with a computer via Bluetooth 1. Follo w the instructions in ActiveSync Help on the computer for configuring Bluetooth on your computer t o support ActiveSync.
• Inser t a storage card int o your device (32MB or larger is recommended). • Set up a sync partnership bet ween the storage card and Windows Media Player Mobile.
4.5 Setting Up E-mail Security Windows Mobile on y our device protects your Outlook e-mails through Secure/Multipurpose Internet Mail Extension (S/MIME), which allows you to digitally sign your messages as w ell as encrypt them.
4. Do one or both of the following: • T o sign all your outgoing e-mail messages so that recipients can be certain that the messages were sent by you and ha ve not been altered in any w ay , select the Sign all outgoing e-mail messages check box.
Chapt er 5 Managing Y our P ock et PC Phone 5.1 P ersonalizing Y our P ocket PC Phone 5.2 Adding and Remo ving Progr ams 5.3 Managing Memor y 5.4 Cop ying F iles 5.
80 Managing Y our Pocket PC Phone 5.1 P ersonalizing Y our P ocket PC Phone Cust omize the T oday screen The T oday screen shows y our upcoming appointments, active tasks , and information about incoming messages. Y ou can customize the T oday screen on your device.
Managing Y our Pocket PC Phone 81 • Select Next appointment to show only the next appointment in your schedule, or Upcoming appoin tments to show multiple appointments. • Clear the Display all day ev ents check box if y ou do not want to display all-day events.
82 Managing Y our Pocket PC Phone Wh y is the device name important? The device name is used to identify the device in the f ollowing situations: • Synchronizing with a PC • Connecting to a network • Restoring information from a backup Note If you synchronize multiple devices with the same PC, each devic e must have a unique name.
Managing Y our Pocket PC Phone 83 5. T ap the alarm icon ( ) to specify the type of alarm you want. Y ou can choose a flashing light, a single sound, or a repeating sound ,. 6. If you choose to play a sound, tap the list next to the Pla y sound check box and tap the sound you wan t.
84 Managing Y our Pocket PC Phone T o use TV O ut T V Out lets you output the contents y ou are viewing on the device scr een to an external display device (e.g . projector). This is useful when you ar e doing a presentation or when you ar e sharing your videos or photos with people.
Managing Y our Pocket PC Phone 85 3. T urn off the external viewing device and then unplug the power cor d. 4. Disconnect the VGA cable ’ s smaller end from the device and then disconnect the external viewing device’ s cable from the VGA out cable.
86 Managing Y our Pocket PC Phone T o increase or decrease the size of te xt on the screen 1. T ap Star t > Settings > System tab > Screen > T ext Size tab. 2. Move the slider to increase or decr ease the text size. T o choose how to be notified about events or actions 1.
Managing Y our Pocket PC Phone 87 T o adjust the brightness of the backlight 1. T ap the batter y icon ( ) on the T oday screen. 2. On the Po wer settings screen, tap Menu > Backlight . 3. On the Brightness tab, mo ve the slider right to increase the brightness, or left to decrease the brightness.
88 Managing Y our Pocket PC Phone trouble accomplishing tasks that r ely on tones from your phone such as accessing messages from an answ ering machine. If set to Short tones, the tone is heard only for one or two sec onds. If set to Off, no tone will be hear d.
Managing Y our Pocket PC Phone 89 5.2 Adding and Remo ving Progr ams Before you pur chase additional programs f or your device, y ou should note the model name of your device, the v ersion of Window s Mobile software running on it, and the type of processor .
90 Managing Y our Pocket PC Phone T o remove pr ograms Y ou can only remove prog rams that you installed. P rograms that c ome with your device cannot be remo ved. 1. T ap Star t > Settings > System tab > Remo ve Pr ograms . 2. In the Programs in storage memory list, select the program y ou want to remov e, and tap Remov e .
Managing Y our Pocket PC Phone 91 • Delete unnecessary files. T ap Star t > Programs > F ile Explorer . T ap and hold the file, and tap Delete . • Delete large files. T o find your largest files , tap Start > Programs > Search . In the T ype list, tap Larger than 64 KB , and tap Search .
92 Managing Y our Pocket PC Phone Note If you want to automatically update inf ormation on both your device and PC, synchronize the information inst ead. F or more information about copying and synchronizing files, see ActiveS ync Help on your PC. T o copy files to a stor age card or Microdrive 1.
Managing Y our Pocket PC Phone 93 2. In the Save to box, select the storage car d or the Microdrive to automatically save new files on the st orage card or Microdrive. 3. T ap OK . Note In the file or note list, a symbol is displayed next to the names of files saved on a storage car d/Microdrive.
94 Managing Y our Pocket PC Phone Basic mode Advanced mode Basic mode Basic mode is the default mode, and allows y ou to easily back up your entire Pocket PC with the tap of a button. Note T o change backup options or location, you will need to do it in Advanced mode.
Managing Y our Pocket PC Phone 95 the data and files on your device . T ap the ‘+’ symbol at the lef t of an item to view its sub-items. Use the check bo xes to select or exclude items for backup . 3. T ap Backup and follow the on-screen instructions to complete the backup.
96 Managing Y our Pocket PC Phone T o schedule automatic backups 1. T ap Options > S cheduled Backup , then tap Change Scheduling . 2. Select the Enable Scheduled Backup check box, and set the frequency of backups to per form, date and time , and other options.
Managing Y our Pocket PC Phone 97 is required. In the P assword type bo x, select the type of password you would like to use . Enter the passwor d and, if necessary, c onfirm the password. If your device is configur ed to connect to a network, use an alphanumeric password for incr eased security for your device.
98 Managing Y our Pocket PC Phone 4. On the Options tab, select the Notes check box. 5. T ap OK . Tip T o display owner information on the T oday screen, tap Start > Settings > Personal tab > T oday . On the Items tab , select the Owner Info check box.
Managing Y our Pocket PC Phone 99 T o per form a hard reset W arning! Y our device will be set back to factor y default settings. Please ensure an y additional installed programs and/or user data hav e been backed up before a hard reset is performed. 1.
100 Managing Y our Pocket PC Phone.
Chapt er 6 Getting Connected 6.1 Connecting to the Internet 6.2 Using V ueFL O 6.3 Internet Explorer Mobile 6.4 Opera Bro wser 6.5 Using C omm Manager 6.
102 Getting Connected 6.1 Connecting to the Internet Y our device is equipped with powerful network ing functions that enable you to connect to the Internet through Wi-Fi, GPRS (General P acket Radio Service) or the mobile phone net work.
Getting Connected 103 5. Enter the Acc ess point name, then tap Next . 6. Enter the user name and password , only if required . 7. T ap Finish . Notes • T o view help information for any screen, tap the help icon ( ).
104 Getting Connected T o set up a dial-up connection to your ISP When you use your device t o dial up to your ISP and connect to the Internet, you will be billed by the number of minutes that y ou use. T o establish a dial-up connection on your device, you need the same settings that you normally use when you dial up from y our computer .
Getting Connected 105 If you have set up multiple types of connections on your device, y ou can manually start a connection. 1. T ap Star t > Settings > Connections tab > Connections . 2. T ap Manage existing connections . 3. T ap and hold the name of the desired connection, then tap Connect .
106 Getting Connected 6.3 Internet Explorer Mobile Internet Explorer is a full-featur ed Internet browser , optimized for use on your device. T o start Internet Explorer • T ap Star t > Internet Explorer . T o set a Home page 1. In the address bar on top of the Internet Explorer screen, ent er the desired W eb page address.
Getting Connected 107 T o delete a favorite or f older 1. In Internet Explorer Mobile, tap Menu > F avorit es > Add/Delete tab . 2. Select the item you want to delete, and tap Delet e . T o change the size of text on W eb pages • In Internet Explorer Mobile, tap Menu > Zoom , and tap the size you want.
108 Getting Connected T o delete temporary Internet files Y our device temporarily stores W eb pages that you fr equently visit or have visited recently t o speed up the display of these W eb pages when you access them. Y ou may want t o delete these files to free storage spac e.
Getting Connected 109 Opera Browser 3. T ap ( ) to go back to the previous page. 4. T ap ( ) to refresh the web page on the scr een. 5. T ap Action > Go to homepage to go back to the Home page. 6. T ap Action > B ookmark this page to add the current web page to the Bookmarks folder .
110 Getting Connected 6.5 Using C omm Manager Comm Manager acts like a central switch that lets you enable or disable phone features as w ell as manage your data connections easily . T o open Comm Manager • T ap the Comm Manager icon ( ) on the T oday screen.
Getting Connected 111 6.6 Using Bluetooth Bluetooth is a short-range wireless communications technology . D evices with Bluetooth capabilities can exchange inf ormation within a distance of about 10 meters without requiring a physical c onnection.
112 Getting Connected Note By default, Bluetooth is turned off. If you turn it on, then turn off y our device, Bluetooth also turns off. When you turn on your device again, Bluetooth automatically turns on. T o turn Bluetooth on and make your devic e visible 1.
Getting Connected 113 9. Select the check boxes of services that you want to use from the paired device. 10. T ap Finish . T o accept a Bluetooth partnership 1. Ensure that Bluetooth is turned on and in visible mode. 2. T ap Y es when prompted to establish a partnership with the other device.
114 Getting Connected Connect a Bluetooth hands-free or ster eo headset For hands-fr ee phone conv ersations, you can use a Bluetooth hands-fr ee headset such as a car kit with your device. Y our device also supports A2DP (Advanced Audio Distribution Pr ofile) which is for stereo audio o ver Bluetooth.
Getting Connected 115 7. T ap Finish . Note If the Bluetooth stereo headset becomes disconnected, turn the headset on and repeat steps 1 to 3 abov e. T ap and hold the name of the Bluetooth stereo headset and tap Set as W ireless Ster eo .
116 Getting Connected • I f the Bluetooth adapter on your comput er was installed using a third-party provided driver , open the Bluetooth software that came with the Bluetooth adapter . This software varies by manufacturer , but in most cases, you will find a Bluetooth Configura tion utility which you can open from the Contr ol Panel .
Getting Connected 117 T o receive a Bluet ooth beam Y our device will not detect and notify you of incoming Bluetooth beams unless you set it up to do this. 1. T ap Star t > Settings > Connections tab > Beam . 2. Select the Receive all incoming beams check box.
118 Getting Connected 3. If there are files contained in the Bluetooth shar ed folder on the other device, you will be able t o see them on the Bluetooth Explorer screen. Select one or more files, then tap Menu > Edit and choose to cut or copy the files.
Getting Connected 119 c. The Add Bluetooth Device W izard opens. Select the My device is set up and ready to be found check bo x, then click Next . d. The wizard then detects your device and displays its name in the dialog box. Select the device name, then click Next .
120 Getting Connected Use another Bluetooth phone as a modem Y ou can use another phone that has Bluetooth as a modem for your device to browse the Internet or to tr ansfer other information. T o do this, create a Bluetooth modem connection on your device and then send information to the phone by using Bluet ooth.
Getting Connected 121 6.7 Using Wi-F i Wi-F i provides wir eless Internet access over distances of up t o 100 meters. T o use W i-Fi on y our device, you need ac cess to a wireless acc ess point of your service provider .
122 Getting Connected 5. If the wireless LAN is secured by a network key , enter this key , then tap Connect . Next time you use your device t o detect wireless networks, you will not see the pop-up m.
Getting Connected 123 F or example, mov e the slider to the left (Best Performance) to have the optimal WLAN performance; move to the right (Best Battery) to obtain the maximum battery usage.
124 Getting Connected Wi-FI: Wir elss tab Wireless LAN: Main tab • T o connect to a wireless network in the list, tap and hold on the desired network, then tap Connect . • T ap a wireless network in the list to view or change its connection settings.
Getting Connected 125 • If you want to use a USB cable connection, you must first install Microsoft ActiveSync version 4.2 or lat er on the computer . • Before using Internet Sharing, disable A ctiveSync on your computer . T o set up your device as a USB modem 1.
126 Getting Connected recently connected to a server . 4. Select the Limit size of server desktop to fit on this screen check box if you wan t to use programs that ha ve been specifically sized for use with your device.
Chapt er 7 Ex changing Messages and Using Outlook 7.1 E-mail and T ext Messages 7.2 MMS Messages 7.3 P ocket MSN 7.4 Calendar 7.5 Con tacts 7.6 T asks 7.
128 Exchanging Messages and Using Outlook 7.1 E-mail and T ext Messages Messaging is where all of your e-mail accounts and your text message account are locat ed.
Exchanging Messages and Using Outlook 129 2. Disconnect your device from your c omputer or LAN. (If you have an over-the-air connection, there is no need to disconnect).
130 Exchanging Messages and Using Outlook If Auto configur ation was successful, the Y our name and User name fields automatically get populated. T ap Next , then F inish to complete setting up your account, or tap Options under Server informa tion to access additional settings.
Exchanging Messages and Using Outlook 131 Outgoing server settings: User name Enter your user name for the out going e-mail ser ver . Passwor d Enter your passwor d for the outgoing e-mail server. Domain Enter the domain of the outgoing e-mail ser ver .
132 Exchanging Messages and Using Outlook T o reply to or forward a message 1. Open the message and tap Reply , or Menu > Reply All , or Menu > Forward . 2. Enter your response . T o quickly add common messages, tap Menu > My T ext and tap a desired message.
Exchanging Messages and Using Outlook 133 attachments automatically with your messages if y ou have an Ex change Server mail account. If you have an Outlook e-mail account, do the following: 1. T ap Star t > Programs > A ctiveSync . 2. T ap Menu > Options .
134 Exchanging Messages and Using Outlook T o download messages from the server T o send and receive e-mail messages for an e -mail account that y ou have with an ISP or that you access using a VPN ser ver connection (typically a work account), y ou first need to connect to the Internet or your corporate network, depending on the account.
Exchanging Messages and Using Outlook 135 Digitally signing a message applies your certificate with the authorization key to the message. This proves to the recipient that the message is fr om you and not from an imposter or a hacker , and that the message has not been altered.
136 Exchanging Messages and Using Outlook Manage folders Each Messaging account has its own f older hierarchy with fiv e default Messaging folders: Inbox, Outbox, Deleted Items, Dr afts, and Sent Items. The messages you rec eive and send through the accoun t are stored in these folders.
Exchanging Messages and Using Outlook 137 7.2 MMS Messages Creating and sharing multimedia messages ( MMS ) with your friends and family are easy with your device .
138 Exchanging Messages and Using Outlook When you purchase y our device, it is already pr eset with your wireless service provider ’ s MMS ser ver setings. If you acciden tally lost the preset settings or you changed to another wireless service provider , follow the steps below to configur e MMS settings.
Exchanging Messages and Using Outlook 139 • Server address . URL address of the MMS server . • Connect via . Select the connection that your device uses for MMS. • Sending size limitation . Select the maximum MMS message size allowed by y our wireless service provider .
140 Exchanging Messages and Using Outlook • T ap to take a photo and insert it into the MMS message. • T ap to recor d an MMS video clip and insert it into the MMS message. • T ap the Exit icon to quit selection and return to the MMS message. 6.
Exchanging Messages and Using Outlook 141 T o create an MMS message from a templa te • While on an MMS message, tap Menu > T emplate > Ne w from T emplate to compose a message using a predefined t emplate. Note T o save a message as a template, open the message and tap Menu > T emplate > Save as T emplate .
142 Exchanging Messages and Using Outlook • T o record a new audio clip and add it to your MMS message , tap . The Record pop-up window then opens. T ap Record t o start recording , and Stop to end the rec ording. T ap Play to list en to the recorded audio clip , then tap Done .
Exchanging Messages and Using Outlook 143 Before you can use MSN Messenger , your device must be connected to the Internet. For inf ormation about setting up an Internet connection, see “Connecting to the Internet” in Chapter 6. Note Y ou must have either a Microsoft .
144 Exchanging Messages and Using Outlook 7.4 Calendar Use Calendar to schedule appointments , including meetings and other events. Y our appointments for the day can be displayed on the T oday screen. If you use Outlook on your PC, you can synchr onize appointments between your device and PC.
Exchanging Messages and Using Outlook 145 6. T ap OK . 7. The meeting request will be sent to the att endees the next time you synchronize your devic e with your PC. Note When attendees accept your meeting r equest, the meeting is automatically added to their schedules.
146 Exchanging Messages and Using Outlook Tips • If someone who is not in your list of contacts calls you, you can crea te a contact from Call History by tapping and holding a phone number and then tapping Save to C ontacts from the shortcut menu.
Exchanging Messages and Using Outlook 147 • T o see a list of contacts employed by a specific company , tap Menu > View B y > Compan y , then tap the company name . T o copy SIM contacts to y our device If you have sav ed contacts on your SIM card, y ou can copy them into Contacts on your device.
148 Exchanging Messages and Using Outlook T o find a contact on your device There are sev eral ways to find a c ontact when your contact list is long. 1. T ap Star t > Contacts . 2. If you are not in Name view , tap Menu > V iew By > Name . 3.
Exchanging Messages and Using Outlook 149 • In a new meeting request using Calendar , tap Attendees and then tap Menu > Find Online . 4. Enter the part or full contact name and tap Find . T ap Selec t to choose the desired contact(s) from the list.
150 Exchanging Messages and Using Outlook 7.6 T asks Use T asks to keep track of things you need to do . A task can occur once or repeatedly (recurring). Y ou can set reminders for your tasks and you can organize them using categories . Y our tasks are displayed in a task list.
Exchanging Messages and Using Outlook 151 Note The new tasks must have due da tes set in order for the reminder t o take effect. T o show start and due dates in the task list 1. T ap Star t > Programs > T asks . 2. T ap Menu > Options . 3. Select the Show start and due dates check box.
152 Exchanging Messages and Using Outlook T o set the default input mode for Notes If you frequently add drawings t o your notes, y ou may find it helpful to set Writing as the default input mode . If you prefer typed text, select T yping . 1. T ap Star t > Programs > Notes .
Exchanging Messages and Using Outlook 153 Drawing on the screen 4. A selection box appears around your dra wing. 5. When finished, tap OK to return t o the note list. Note T o selec t a drawing (for example , to copy or delete it), tap and hold the drawing briefly .
154 Exchanging Messages and Using Outlook 9. If you are creating a stand-alone r ecording, the r ecording will appear in the note list. Tip T o quickly create a recording , press and hold the VOICE COMMAND butt on, then you can begin to rec ord after a beep sound.
Exchanging Messages and Using Outlook 155 T o play back a voic e recording 1. On the V oice Recorder screen, select the voice r ecording you w ant to play back. 2. T ap . Y ou can also double-tap the voice recor ding to play it back. Notes • Tap to increase the volume; Tap to decrease the volume .
156 Exchanging Messages and Using Outlook T o set the voice rec ording as a ring tone 1. On the V oice Recorder screen, select the voice r ecording you w ant to set as your device ’ s ring tone. 2. T ap Menu > S et as Ringtone . T o rename or move a r ecording 1.
Chapt er 8 Using GPS 8.1 Guidelines and Prepar ation for U sing GPS 8.2 Downloading Satellite Da ta via QuickGPS 8.3 Using T om T om Naviga tor 8.4 GPS Con trols.
158 Using GPS 8.1 Guidelines and Prepar ation for U sing GPS • Do not operate the GPS system while driving. • The plotted GPS route is only for driving ref erences. It should not affect actual driving behavior . • Please use the GPS system cautiously.
Using GPS 159 • Signal reception may be affected by obstructions such as high-rise buildings, tunnels, bridges, f orests, w eather (rainy or cloudy day s), etc. If the vehicle ’ s visor contains metal, it will be difficult for the GPS signal to pass through.
160 Using GPS On the screen, initially , you will see the Valid time of the downloaded data to be 3 days . As days and time pass, the r emaining days and time of validity will be shown. T o speed up GPS positioning, download the latest Ephemeris data when the validity of the data expires.
Using GPS 161 • Autodownload when da ta expires . Allow s Ephemeris data to be automatically updated onto y our device when the data has expired . • Autodownload when c onnected to PC via ActiveSync . Allo ws Ephemeris data to be automatically downloaded via A ctiveSync to your device when your devic e is connected to your computer .
162 Using GPS A Download Wizard then opens and allo ws you to download a map of y our choice for free . After the download is completed , the map is automatically added to T om T om Navigator . For more information about the st eps on downloading the free map , refer t o the Quick Start Guide.
Using GPS 163 6 Shows the name of the next street to turn onto . 7 Shows information about y our journey and the strength of the GPS signal. T ap this area to view a route summary . Main Menu T ap anywhere on the map in the Driving V iew screen to open the Main Menu .
164 Using GPS • T om T om PL US services . Provides e xtra ser vices that you can subscribe to, and allo ws you to download maps and v oices to your device after you have pur chased them. • Call number . Allows y ou to search for phone numbers of the plac es that are categorized under point of in terests.
Using GPS 165 After you have set y our destination, Navigator asks y ou whether you need to arrive at a particular time. After you tap YES and en ter an arrival time, Navigator shows y ou whether you will arrive on time or not. F or more information about arrival times, ref er to the software manual on disc.
166 Using GPS 3. Y ou can then select one of the following location as a favorite: Home , Address , Rec ent destination , or P oint of interest . 4. Use the default name or enter a name for the fa vorite. 5. T ap Done . T o navigate to a fa vorite 1. T ap the Driving View scr een to open the Main Menu.
Using GPS 167 POI locations POI categories T o add a point of interest 1. T ap the Driving View scr een to open the Main Menu. 2. T ap Change preferences > Manage POIs . 3. Before you can add a POI, y ou have to cr eate a category first. Y ou can only add your POIs to a POI category you have cr eated yourself .
168 Using GPS Advanc ed planning It is recommended to plan in advance befor e you start on the journey. Y ou can use the Advanc ed planning function to find out which is the fastest or shortest route between your starting point and destination. T o plan a route in advance 1.
Using GPS 169 6 2 1 5 3 4 7 1 This Scale Bar shows the distance range shown on the map based on the current zoom scale. 2 This is your current position on the map. Tap on another location to move to a diff erent part of the map. 3 T ap to center the map on your current position.
170 Using GPS Setting Description Safety preferences Allows you to enable Safety lock , which tempor arily hides some buttons and features of Na vigator while you ’ re driving, and gives you the option to t emporarily T urn off map display so that you see only the inf ormation about the next instruction.
Using GPS 171 8.4 GPS Con trols When a map or menu is shown on the T om T om NA VIGA T OR, use the following contr ols on your device to na vigate: • On the Map Browser screen, pr ess NA VIGA TION up to zoom in, press NA VIGA TION down to zoom out on a map .
172 Using GPS.
Chapt er 9 Experiencing Multimedia 9.1 Using C amera 9.2 Using P ictures & V ideos 9.3 Using Windo ws Media Pla yer Mobile 9.4 Using A udio Manager 9.
174 Experiencing Multimedia 9.1 Using C amera T ak ing photos and recording video clips along with audio ar e easy with your device ’ s built-in camera.
Experiencing Multimedia 175 The available capture modes of the camer a are as follow s: • Photo : Captures standar d still images. • Video : C aptures video clips, with or without accompan ying audio . • MMS Video : C aptures video clips suitable for sending via MMS.
176 Experiencing Multimedia • Press the CAMERA button or the CENTER OK butt on to take a photo or contacts picture. • Press the CAMERA button or the CENTER OK butt on to start recording video; press it again to stop r ecording. • Press the CAMERA button or the CENTER OK butt on each time when taking photos for a picture theme or panorama.
Experiencing Multimedia 177 Picture Theme mode 18 16 17 1 M ode Switching con trol . T apping the left/right arrow ( / ) on the screen allows y ou to switch the capture mode. 2 Camera S witching control . The camera icon ( / / ) indicates the current camera being used.
178 Experiencing Multimedia 9 Brightness . T apping the minus/plus icon ( / ) decreases or increases the brightness level. 10 Metering Mode . T ap to toggle the metering mode between Center Area ( ) and Av erage ( ). 11 Flash Ligh t . T ap to turn on or off the flash light that is located at the back of your device.
Experiencing Multimedia 179 While capturing an image in the Picture Theme captur e mode, you can select a preset template. T o view and select from differ ent templates, tap on the Camera screen. Depending on the chosen templat e, one or more photos may need to be taken f or the template.
180 Experiencing Multimedia The Review scr een After taking a still image or recording a video clip , you can view the image or video clip on the Review screen . In addition, you can tap the icons at the bottom of the Review screen to delete a captur ed image or video, send it via e-mail or MMS, and more.
Experiencing Multimedia 181 6 Brow se . After you have taken phot os in Sports or Burst mode, the total number of consecutive shots is shown in the lo wer right corner of the Review screen. T ap the up/down arrow ( ) to browse through the sequence of photos.
182 Experiencing Multimedia Capture mode Capture size setting Zoom range MMS Video Medium (176 x 144) 1.0x to 2.0x Small (128 x 96) 1.0x to 2.0x Contacts Picture Large (640 x 480) 1.0x to 4.0x Medium (320 x 240) 1.0x to 8.0x Small (160 x 120) 1.0x to 8.
Experiencing Multimedia 183 The Camer a Settings screen Camera Settings screen in Photo mode While capturing a still image or video clip using any capture modes, tap the T ool icon ( ) to access the Camera Settings screen. The Camera Settings screen allows you to configure the capture settings.
184 Experiencing Multimedia 3 3 T ap or press the CENTER OK button to select a setting and close the submenu. Alternatively , press NA VIGA TION up/down to select a setting, then press NA VIGA TION left to close the submenu. For mor e information about the differ ent menus and settings, see the succeeding sections.
Experiencing Multimedia 185 Flash Light menu • Flash Light . Set this option to On to turn on the flash light (locat ed at the back of your device) so that you can shoot phot os or video clips in a dark-lit environmen t. This also allows the camera t o give off a flash when taking photos.
186 Experiencing Multimedia Advanc ed menu T ap the lef t/right icon in this bar to switch between the menu pages in the Advanced menu. Alternatively , when using the Navigation Control buttons , keep pressing down until this bar is selected (bar changes color).
Experiencing Multimedia 187 • Review Duration . Set a time length f or displaying the captured image/video on the Review screen before aut omatically saving it and returning to the live Camer a screen. Select No Limit if you do not want to impose a time limit.
188 Experiencing Multimedia 2 3 4 1 5 1 In the submenu, tap one of the properties to adjust. Alternatively , press NA VIGA TION up/down to select a property. 2 T o increase/decrease the value, tap the plus/minus icon or press NA VIGA TION left/right. T he live Camera screen on the backg round immediately displays the effect of changes.
Experiencing Multimedia 189 • Copy the pictures, GIF animation files , and video files from your PC or a storage card to the My P ictures folder on your device . ( Y ou can also copy video files to the My Videos f older .) For mor e information about copying files fr om your PC to y our device, see ActiveSync Help on your PC.
190 Experiencing Multimedia 2. T o find the video clips that you captured, tap the down arro w ( ) next to the My Pictures folder and tap My Documents. Next, tap My Videos. Video clips are displayed as thumbnails by default, which appear with a media icon ( ).
Experiencing Multimedia 191 T o delete a picture or video clip Do any of the following t o remove a picture or a video clip: • Select a pic ture or video clip on the Pictures & Videos screen, and tap Menu > Delete . • T ap and hold the thumbnail of the pic ture you want t o delete, then tap Delete .
192 Experiencing Multimedia T o send pictures and video clips via e -mail Y ou can send pictures and video clips to other devices via e-mail. 1. First, set up Messaging t o send and receive messages . 2. Fr om the program, select the item you wan t to send.
Experiencing Multimedia 193 9.3 Using Windo ws Media Pla yer Mobile Y ou can use Microsoft Windo ws Media Player Mobile 10 for P ocket PC to play digital audio and video files that are st ored on your device or on a network, such as on a W eb site . Using Window s Media Player Mobile, y ou can play both audio and video files.
194 Experiencing Multimedia About the contr ols The following ar e available contr ols on the Windows Media Pla yer Mobile. 1 2 3 5 6 7 8 4 9 This contr ol Does this 1 Plays/P auses a file. 2 Displays the video in full screen. 3 Displays a W eb site where you can find music and videos to play .
Experiencing Multimedia 195 About the screens and menus Windows Media Pla yer Mobile has three primary screens: • Playback screen . The default screen that displays the playback controls (such as Pla y , Pause , Next, Previous , and Volume) and the video window .
196 Experiencing Multimedia Cop y media files to your de vice Use the latest version of the deskt op Player (Windows Media Player 10 or later) to synchroniz e digital media files to your device (instead of dr agging a file from a folder on y our PC to a folder on your devic e, for example).
Experiencing Multimedia 197 • In the Playlist which is the leftmost pane, select a desired playlist. • In the File List which is the middle pane, multi-select desired files then drag them to the Sync List. • Click the Start Sync button found at the bottom of the S ync List.
198 Experiencing Multimedia 3. In most cases, Windows Media Pla yer Mobile automatically updates the library. How ever , you can manually update the library to ensure that it contains new files that you r ecently copied to y our device or storage card.
Experiencing Multimedia 199 In W indows Media Play er Mobile on your device, y our playlists are available in the Library under the My Playlists category. Ther e is also a temporary playlist, called Now Playing , which lists the currently playing file , as well as any files that hav e been queued up to play next.
200 Experiencing Multimedia 9.4 Using A udio Manager Audio Manager is a music brow ser and player in one. It gives y ou access to all the music files on your device , and allows you to easily br owse for the music that you want to pla y by organizing music into cat egories such as title, artist, album, etc.
Experiencing Multimedia 201 No . Description 1 Opens the All Songs submenu where you can bro wse music files by file name or song title. 2 Opens the Playlists submenu where you can cr eate playlists and play them back. 3 Opens a submenu where you can bro wse music files by the selected category.
202 Experiencing Multimedia Music Play er Music Player is integrated within A udio Manager , and it lets you play back music files. After selecting a song in the Library, Music Play er opens and automatically plays it. Use the av ailable buttons to contr ol the playback.
Experiencing Multimedia 203 Playlists A playlist is a list of music files that play in a sequential or der . The Playlists screen shows the curren t playlists that are f ound on your device and memory card. There are two types of playlists that will be sho wn on the Playlists screen: • Windo ws Media Play er playlists .
204 Experiencing Multimedia T o create a playlist 1. On the Library ’ s M ain screen, tap Playlists . 2. On the Playlists screen, tap Menu > New . 3. Enter a Playlist name and tap OK . 4. On the Playlists screen, tap the playlist y ou have just cr eated and tap Edit .
Experiencing Multimedia 205 Set music as ring tone Audio Manager allows you t o select your favorite music and set it as a ring tone for your devic e. 1. Use the NA VIGA TION Contr ol to select a song in the Library, or tap a song to play it in Music Play er .
206 Experiencing Multimedia 9.5 Using Str eaming Media The Streaming Media prog ram allows you to str eam live broadcasts or on-demand media content from the W eb . Y ou do not have to wait until the entire media conten t is completely downloaded befor e watching the video or hearing the sound.
Experiencing Multimedia 207 The Streaming Media progr am allows you to pla y 3GP and MPEG-4 files. It also suppor ts playback of SDP (Session Description Protocol) files .
208 Experiencing Multimedia T o view streaming video file information Y ou can view the properties and general information of a streaming video clip, such as file f ormat, audio codec, dimension, frames , and duration of the video. • T ap Menu > Proper ties from the progr am.
Chapt er 10 Using Other Applications 10.1 W ord Mobile 10.2 Ex cel Mobile 10.3 V iewing Slide Show s with P ow erP oint Mobile 10.4 Using A dobe Reader LE 10.
210 Using Other Applications 10.1 W ord Mobile W ord Mobile is a streamlined version of Microsoft W ord . W ord documents created on your PC can be opened and edit ed on your device. Y ou can also create and edit documents and templa tes in W ord Mobile and save them as *.
Using Other Applications 211 10.2 Exc el Mobile Exc el Mobile makes it easy for you to open and edit Ex cel workbooks and templates creat ed on your PC. Y ou can also create new w orkbooks and templates on your devic e. T o create an Ex cel file 1. In Excel Mobile, tap New .
212 Using Other Applications • Notes. Notes written f or slides will not be visible. • Rearranging or editing slides . P owerP oint Mobile is a viewer only . • Some file formats. F iles creat ed in *.ppt format earlier than Po werPoin t '97 and HTML files in *.
Using Other Applications 213 T o navigate through a PDF file Y ou can do any of the following: • T ap the Up, Down, Right, and L eft arrow keys on the horizontal and vertical scrollbars to move to the desir ed direction of the page. • Press NA VIGA TION up, do wn, right, and left to move up or down a page or scroll through the pages.
214 Using Other Applications Notes • A dobe Reader LE displays a bookmark pane for the PDF files that contain bookmarks. Y ou can tap the book marks to go to a specific section/page within the file. • Adobe Reader LE supports password protected PDF files with up to 128-bit encryption.
Using Other Applications 215 10.5 Using MIDlet Manager MIDlets are Java applications that can run on mobile devic es. Y our device supports Java™ 2 Micro Edition, J2ME™. T he MIDlet Manager allows you to download Java applications , such as games and tools that are specifically designed for mobile devices .
216 Using Other Applications T o run MIDlets on your device 1. T ap Star t > Programs > MIDlet Manager . 2. T ap a MIDlet to run. T o view the MIDlets currently running • T ap the down arrow on the top left of the MIDlet Manager screen, then tap Running .
Using Other Applications 217 T o change the display name of a MIDlet 1. T ap and hold a MIDlet, and tap Rename . 2. Enter a new name for the MIDlet, then tap OK . Note Y ou cannot change the name of a MIDlet suite. T o uninstall a MIDlet/MIDlet suite Before you uninstall a MIDlet/MIDlet suit e, make sure that it is not running .
218 Using Other Applications Security Option Description Net Acc ess Determines whether a MIDlet/MIDlet suite can access the Internet. Local Connectivity Enables a MIDlet/MIDlet suite to access services, such as Bluetooth. App Auto Run Enables a MIDlet/MIDlet suite to run at specified times, or any time.
Using Other Applications 219 • T ap and hold a file and tap Open Archive . • Double -tap a file. Note Y ou cannot select multiple ZIP files. 2. The files contained in the zip file are then displa yed. Select files by doing one of the following: • T ap to select a file.
220 Using Other Applications 10.7 Using V oice Speed Dial Y ou can record voice tags so tha t you can dial a phone number or launch programs simply by speaking a word . Creat e voice tag f or a phone number 1. T ap Star t > Contacts to open the Contacts list.
Using Other Applications 221 • T ap the Delete button ( ) to delete the voice tag . Tip T o ensure voice recognition accuracy , please record y our voice in a quiet place. Creat e voice tag f or a program 1. T ap Star t > Settings > Personal tab > V oice Speed Dial .
222 Using Other Applications 10.8 Using JET CET Print JETCET Prin t lets you print image files or documents from y our device straight to a printer . Y ou can also print e -mails, e-mail attachments, Web pages, contacts, tasks, and appoin tments. JETCET P rint options When JETCET Print opens, a list of printing options is displa yed.
Using Other Applications 223 Tip Y ou can also print document and image files from File Explorer . T o print, use File Explor er to locate the file you want to print . After locating, tap and hold the item and on the menu that opens, tap Prin t . Print a w eb page 1.
224 Using Other Applications.
Appendix A.1 Regulatory Notices A.2 PC Requirement to Run A ctiveS ync 4.x A.3 Specifications.
226 Appendix A.1 Regula tory Notices Regulatory Agency Identifications For r egulatory identification purposes, your product is assigned a model number of A THE100 . T o ensure continued reliable and safe oper ation of your device, use only the accessories listed below with your A THE100 .
Appendix 227 • ETSI EN 301 489-17 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment.
228 Appendix Safety Precautions for RF Exposur e Use only original manufacturer-approv ed accessories, or acc essories that do not contain any metal . Use of non-original manufacturer-approved accessories ma y violate your local RF exposure guidelines and should be avoided .
Appendix 229 • Should use the ear opposite the pacemaker to minimize the potential for interference . If you have any r eason to suspect that interference is taking place, turn the phone OFF immediately . Hearing Aids Some digital wireless phones may interfere with some hearing aids.
230 Appendix WEEE Notice The Directive on W aste Electrical and Electronic Equipment ( WEEE), which entered into f orce as Eur opean law on 13th F ebruary 2003, resulted in a major change in the treatment of electrical equipment at end-of-life.
Appendix 231 A.2 PC Requir ement to Run A ctiveSync 4.x T o connect your device to the PC, you must have Microsoft® ActiveSync® program installed on your PC.
232 Appendix A.3 Specifica tions Syst em Information Processor Baseband: QUAL COMM ® MSM 6275 CPU: 624 MHz with A Ti TM Graphic Chip W2284 Memory - ROM: 128 MB - RAM: 64 MB SDRAM (Figures ar e the total ROM and RAM memory available for use and storage.
Appendix 233 Cellular Radio Module Functionality HSDP A/UMTS (2100 for Eur ope, 850/1900 for USA) GSM/GPRS/EDGE (850, 900, 1800, and 1900) Mode Dual (GSM) Internal Antenna Y es Physical Dimensions 133.
234 Appendix Controls and Ligh ts Navigation Buttons • 5-way navigation con trol/Enter button • Comm Manager/Voice Recorder • Camera button • OK button • Start button • Internet Explorer/V.
Inde x.
236 I ndex A A2DP 114 About licenses and protected media 195 ActiveSync - Comm Manager 110 - copy files 91 - install and set up 66 - overview 32 - synchronize 70 Add and remov e programs 89 Add attac.
Ind ex 237 Change - device name 82 - screen text size 86 Clock & Alarms 36, 82 Close program 91 Comm Manager 37, 110 Compose messages 131 Confer ence call 61 Connect device to Internet - set up di.
238 I ndex Find c ontact - online 148 - on device 148 Format Microdriv e 36, 83 Forward message 132 G Games 32 GIF animation 189 GPRS 102 GPS 33, 36, 158, 159 H Hardware keyboar d 40 Hard reset 99 Hel.
Ind ex 239 - overview 33, 215 - uninstall MIDlets/MIDlet suites 217 MMS 137 - add audio clip 141 - add emoticon 141 - add photo/video 139 - add text 141 - add W eb page address from F avorites 141 - c.
240 I ndex - Excel Mobile 32, 211 - File Explor er 32 - Format Microdriv e 36 - Games 32 - Help 32 - Internet Explorer Mobile 33, 106 - Internet Sharing 124 - JETCET Print 33 - Messaging 33, 128 - MID.
Ind ex 241 Settings (Personal tab) - Buttons 35 - Input 35 - Lock 35 - Menus 35 - MSN Options 35 - Owner Information 35 - Phone 35 - Sounds & Notifications 35 - T oday 35 - V oice Speed Dial 35 S.
242 I ndex T T asks 34, 150 T asks search 47 T ask Manager 37, 85 T emporar y Internet files (Internet Explorer) - delete 108 T erminal Ser vices Client 125 T ext size - screen 86 - W eb pages 107 Tim.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté HTC ATHE100 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du HTC ATHE100 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation HTC ATHE100, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le HTC ATHE100 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le HTC ATHE100, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du HTC ATHE100.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le HTC ATHE100. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei HTC ATHE100 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
