Manuel d'utilisation / d'entretien du produit N6010 du fabricant HP (Hewlett-Packard)
Aller à la page of 32
HP Scanj et N6 010 Us er Guide.
.
Contents 1 Introduction to the H P Scanjet N6010 scanner .............. .......................... ...........2 Scanner hardware...................................................... .............................................2 Scanning software....
1 Introduction to the HP Scanjet N6010 scanner This user guide tel ls you what you need to know about using t he HP Scanjet N6010 scanner. ● Scanner hardware ● Scanning software ● Where to get a.
opened in your d efault PDF view er. 4 Scan Business C ard (lower-right button) Scans a business card. By default, this button will scan to the NewSoft Presto! B izCard applicat ion.
Scanning software The scanner includes a CD with scanning and document-man agement programs, as shown in th e following ta ble. Programs Software use HP Scanning Soft ware The HP scanni ng software incl udes the Scanne r Tools Utility, the HP Docu ment Copy Utility, the HP PDF writer, and the TWAI N scanner drivers.
● PDF Settings tab ● Mainte nance tab Buttons tab You can use the Scanner Too ls Utility to change the def ault scan application s used by the front-panel b uttons. Use the steps that follow to change the default appli cation for any of these butto ns: 1.
In the Save As settings a rea, set up the default f ile name and location that is used when saving a PDF file. The following settings can be speci fied: ● File name: Select one or more of the check boxes to specify the defaul t file name for PDFs. Th e following options can be used: – File Name : Type in the default na me of the PDF fi le.
● Feed-Roller As sembly Maintenance: This section indica tes when the scanner feed rollers were last repl aced and lets you know when it is tim e for them to be replaced. The recommend ed replacement interval will vary based on number of pages scanned, number of pap er jams, and paper errors.
3. Click th e languag e that you want. A list of guides is d isplayed. 4. Click Setup and Support Guide . Online help The following sources of information are a vailable online: ● Scanner Tools Util.
Disabling the scanne r buttons To prevent butto ns from being accidentally pu shed, you can use the Scanner Tools Utility to disable the bu ttons. Use the same utili ty to re-enable the buttons. To disable the scanner bu ttons, complete the follo wing steps: 1.
2 Scan and copy This section contai ns the following topi cs: ● Load origina ls ● Basic scanning ● Basic copying steps ● Use the scanner but tons ● Scan from other softw are programs Load originals This section explains how to load originals in the document feeder.
Load originals in the document feeder 1. Extend the output tray. For long er paper sizes, extend the document f eeder extension at the t op of the scanner. 2. Place the stack of pa ges face down. The top of the page s should point down ( ). 3. Adjust the paper g uides to center the origina l.
Basic scanning 1. Load the origina ls. For more information, see Load originals . 2. Do one of the fo llowing: – Press the scanne r button for the task you wa nt to perform. F or more informati on see Use the s canner buttons . – Open a scanning softw are program and start the scan from the so ftware.
Note If you do not have Ne wSoft Presto! PageManager installed, you are prompted for which p rogram to use for the scan. When the scan is complete, the sca nned image is displayed on the screen. You can save the scan by draggin g it to a location in the folder tree on the left-ha nd side of the screen.
Scan to PDF button Use the lower -left Scan to PDF ( ) button to scan an item a nd save it as a PDF file. The file is autom atically opened into Adobe Acroba t or your default PDF reader.
To scan a busine ss card, adjust the paper guid es to the width of t he card and insert it as follows: ● vertically ● face down into t he document feeder When you press the Scan Busine ss Card button, the NewSoft Presto! BizCard program automatically laun ches and scans the card.
front-panel bu ttons, to map the sc anner buttons to di fferent appl ications, or to view scanner maintenance information. For more informati on, see Scanner Tools Utility or the Scanner Tools Utili ty online Help. Cancel button Use the far-left up per Cancel ( ) button t o cancel a scan that is in progress.
3 Care and maintenance This section presents informat ion about how to care for and m aintain the scanner. ● Scanner Tools Util ity ● Order maintenance an d scanning supplies ● Clean the scanner.
To clean the strips of glass, follow these steps: 1. Disconnect the USB cable and power supply from the scanner. 2. Open the scanner h atch. 3. Clean the glass by usin g a soft, lint-free cloth that has b een sprayed with a mild gl ass cleaner. Caution Use only glass cleaner to clean the scan ner glass.
3. Place the unfolde d cloth into the document feede r. 4. Press the Scan Documen t button. Caution Wait two minutes for the componen ts to dry before proceeding to the next step. 5. Place u p to five pag es of printed paper in the s canner. Scan an d view the results.
3. Use an HP paper-p ath cleaning cloth to clea n the feed roller and th e small rubber pad that is loca ted below it. Note If you do not have a n HP paper-path cleaning cloth, use a lint-free cloth that has be en dampened with isopropyl alcohol. 4. Wipe the area ar ound the small rubber pad to remove any paper dust.
4 Troubleshooting This section contai ns solutions for common problems wit h the scanner. ● Scanner LEDs ● Scanner initializa tion or hardware problems ● Scanner operation p roblems ● Scanner paper path prob lems ● Contact HP Support For additional troubleshooting, see the help for th e scanning program that you are using.
LED indi cation Scanner action o r condition The Power LED is lit with a steady, dim amber light. The scanner i s in Power Save mode . The Power LED is lit with a steady green light . The scanner is on and read y to scan. The Power LED blinks green at a medium speed.
4. A software conflict m ight exist on your computer. Yo u might need to uninstall and then reinstall the scanner soft ware. a. Click Start , click Settings , and then click Control Pane l . (In Windows XP, click Start , and then click Control Panel .
Scanner operation problems ● Scanner will not turn on ● Scanner does not scan right away ● Scanned image is fuzzy ● Scanner is scanning items very slowly ● Scanned images are not stra ight .
Scanner b uttons are no t working correctl y After each step, start a scan to see if th e buttons are working. If the problem persists, proceed with the next step. 1. A cable might be loos e. Ensure that the USB cable and the power sup ply are securely connected.
● The document fe eder or output tray might contain more than the maximum number of pages. Load fewe r pages in the document feeder, and re move pages from the output tray. ● Check to se e that the scanner hatch is fully closed. ● Clean the scanner pap er path to help reduce misfeeds.
Clear jam s from the s canner pape r path 1. Open the scanner h atch. 2. Remove the originals or an y obstructions from the paper path. 3. Remove any debris (paper, staples, cl ips, etc.) that you see in the paper path. 4. Close the scanner hatch. 5. Reload the u nscanned originals in the do cument feeder.
If you have your product name or model number, you can enter it here. A list displays of available parts for that device that you can order. If you do not find what you are look ing for, return to the fi rst Web page and look for th e list of available part services or resellers in your region, or co ntact your local HP dealer.
Index A accessibility 8 applications, scan from 16 B blurry images 24 business cards load in document feeder 10 scan 14 scan button 3 software 4 buttons about 2 disable 9 troubleshoot 25 use 12 C cabl.
parts, order 27 PDF files HP PDF writer software 4 scan to 14 Scan to PDF button 2 settings 4 Setup and Support Guide, printable 7 user guide, printab le 7 Power LED 21 power switch locate 3 troublesh.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté HP (Hewlett-Packard) N6010 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du HP (Hewlett-Packard) N6010 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation HP (Hewlett-Packard) N6010, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le HP (Hewlett-Packard) N6010 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le HP (Hewlett-Packard) N6010, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du HP (Hewlett-Packard) N6010.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le HP (Hewlett-Packard) N6010. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei HP (Hewlett-Packard) N6010 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
