Manuel d'utilisation / d'entretien du produit BL870c du fabricant HP (Hewlett-Packard)
Aller à la page of 27
1. Four small form factor (SFF) hot-plug drive bays 4. Processor 1 of up to four Intel® Itanium® 9100 series processors 2. Three PCIe Mezzanine slots 3. Processor 0 of up to four Intel® Itanium® 9100 series processors At A Glance This document covers the HP Integrity BL870c server blade only.
Up to four Intel® Itanium® 9100 Series processors Memory: Up to 96 GB of memory. Supporting (24) DDR2-533 ECC memory DIMMS Storage Controller: Embedded LSI 1068 SAS RAID Controller integrated on sys.
The BL870c server blade plugs vertically into the BladeSystem c7000 and c3000 enclosures HP Integrity BL870c server blade is a full-height, BladeSystem c-Class form factor occupying two (2) full height slots. BL870c server blades can be configured in a fully populated rack.
Processor Intel® Itanium® Dual-Core Processors Model 9150N (1.6 GHz, 24MB L3 cache, FSB533) Intel® Itanium® Dual-Core Processors Model 9140N (1.6 GHz, 18MB L3 cache, FSB533) Intel® Itanium® Dual-Core Processors Model 9120N (1.
Fibre Channel on the HP Integrity BL870c server blade Optional Fibre Channel HBAs are supported by the HP Integrity BL870c. The mezzanine circuit board connects directly to the server blade system board.
Integrate HP Business Technology Optimization IT Management Software HP Virtual Server Environment Suite for HP-UX 11i for HP Integrity server blades Learn More HP-UX 11i on Integrity Server Blades *Fee based software products which aren't bundled with the HP-UX 11i v3/v2 Foundation OE.
The Smart Setup application is a bootable media that HP recommends to be used prior to installing the operating system distribution. This application media contains the latest documentation, firmware, and tools to help configure and optimize your system.
clusters, systems (nodes), and packages that run applications. HP Systems Insight Manager HP Systems Insight Manager (HP SIM) provides a unified, secure and extensible environment to centrally manage servers, storage and other infrastructure devices across multiple operating system platforms.
System Management Homepage please visit the management Web site at http://www.hp.com/servers/manage . Performance Manager and Agent HP Performance Manager, Agents, and Monitor combine to provide a powerful and flexible distributed management solution.
Insight Control Environment for BladeSystem Insight Control Environment for BladeSystem delivers foundation management for HP BladeSystem lifecycles, including hardware resource deployment, health monitoring, software version control, performance monitoring, and power management.
Supported Software Options HP Integrity Virtual Machines HP Integrity Essentials Virtualization Manager HP Integrity Essentials Capacity Advisor HP Secure Resource Partition HP-UX Workload Manager HP .
Availability Dual-Port Fibre Channel Mezzanine Card for redundant SAN connection Two hot-plug SAS hard drive bays and integrated RAID (LSI 1068) controller on every server blade Network adapter teamin.
Trusted Computing Services (TCS) HP-UX TCS provides software support for hardware-enforced key management on supported HP Integrity servers. By providing a low-cost embedded security chip option (know.
Software Assistant (SWA) HP-UX SWA is a command-line tool that consolidates, simplifies and helps automate patch and security bulletin management on HP-UX systems. The SWA tool is the HP-recommended utility to maintain currency with HP-published security bulletins for HP-UX software.
AAA Server HP-UX 11i AAA Server provides authentication, authorization and accounting services using the RADIUS and EAP protocols to authenticate and authorize user access to network devices and software applications. The AAA Server also generates usage logs for accounting, auditing and billing purposes.
Factory Express Portfolio for Servers and Storage HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.
levels that meet your business requirements, from basic to mission-critical. A full range of HP Care Pack hardware and software services are available including: Installation and start up Education co.
Base Model HP Integrity BL870c Base Unit AH232A Processor(s) Supports up to four (4) processors None included in base unit Cache Memory All processor models L2 cache per core; 1MB Instruction, 256KB D.
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.
Step 3: Choose Additional Options for Factory Integration Hard Drives Serial Attached SCSI (SAS) SFF Hot Plug HP 72GB 3G SAS 15K SFF SP HDD 431935-B21 HP 36GB 3G SAS 15K SFF SP HDD 431933-B21 HP 146GB.
Processors (field upgrade only) Intel® Itanium® Dual-Core Processors Model 9150N (1.6 GHz, 24MB, 533FSB, L3 cache) AH320A Intel® Itanium® Dual-Core Processors Model 9140N (1.6 GHz, 18MB, 533FSB, L3 cache) AH255A Intel® Itanium ® Dual-Core Processors Model 9120N (1.
Service and Support Offerings (HP Care Pack Services) NOTE: The HP Care Pack service part numbers below for the Integrity BL870 c-Class server blades, cover the server blade and all HP branded hardware options qualified for the server, purchased at the same time or afterwards, internal to the server.
DIMM installation guidelines: All DIMMs must be PC2-4200 DIMMs (DDR2 533MHz) 1. All four DIMM slots in a memory bank must be populated. 2. Banks must be populated in sequential numeric order, starting with bank 0. 3. All four DIMMs in a memory bank must be identical.
1-4 4 x SFF SAS Hot Plug Hard Drives Hard Drives SAS Hard Drive Quantity Supported Position Supported Controller 72GB 15,000 rpm SAS SFF 36GB 15,000 rpm SAS SFF 146GB 10,000 rpm SAS SFF 72GB 10,000 rpm SAS SFF 4 1-4 LSI 1068 QuickSpecs HP Integrity BL870c Server Blade Storage DA - 12926 Worldwide QuickSpecs — Version 1 — 2.
NOTE: To review maximum system power ratings for facilities planning purposes use the Active Answers Blade Power Sizer which is available via the online tool located at URL: http://h71019.
System Unit Dimensions Height 14.42 in (36.63 cm) Depth 20.05 in (50.93 cm) Width 4.10 in (10.41 cm) Shipping Dimensions Height 21.50 in (54.61 cm) Depth 23.
Embedded Dual Broadcom 5704 Gigabit NICs Network Interface 1000Base-Sx Compatibility IEEE 802.3ab 1000Base-Sx Data Transfer Method PCI-X 133/66MHz 64-bit Network Transfer Rate (Theoretical Maximum Val.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté HP (Hewlett-Packard) BL870c c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du HP (Hewlett-Packard) BL870c - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation HP (Hewlett-Packard) BL870c, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le HP (Hewlett-Packard) BL870c va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le HP (Hewlett-Packard) BL870c, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du HP (Hewlett-Packard) BL870c.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le HP (Hewlett-Packard) BL870c. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei HP (Hewlett-Packard) BL870c ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
