Manuel d'utilisation / d'entretien du produit DS-9664NI-ST du fabricant Hikvision
Aller à la page of 152
1 DS - 9000 - ST Series Hybrid DVR DS - 9600 - ST /R T/XT Series NVR DS - 7700 NI - SP Series NVR USER ’ S MANUA L V ersion 3.1.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 2 Hikvision® Network Digital V ideo Rec order U ser ’ s Manual This manual, as well as the software described in it, is furnished under license and may b e used or copied only in accordance with the terms of such license.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 3 Preventive and Ca utionary Tips Before connecting and operating y our DVR, please be advised of the following tips: • En sure unit is installed in a we ll-ventilated, dust -free environment.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 4 CONTENTS C H A P T E R 1 Int roduction ................................................................................................................... 8 Overview ........................
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 5 Understanding the P l aybac k Interface ................................................................................................ 59 Searching for Reco rded Files ....................
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 6 Configuring E-m ail Settings ................................................................................................................... 92 Configuring H ot Spare Settings ..........
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 7 Managing eSATA ................................ ................................................................................................. 130 Configuring Q uot a Mode ...............
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 8 C H A P T E R 1 Introduction.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 9 Overview Thank y ou for your purchas e of DS-7700NI- SP/ 9000/9600 Serie s Hybrid Digital Video Recorder (HDVR)/NVR. To g et detailed information about the HDVR/N V R , please re ad through the I nstallation’s Manual and this U se r ’ s Ma nual thoroughly .
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 10 I ndepe ndent config ur ation f or each ch annel, including resol ut ion, frame rate, b it rate, im age quality, etc.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 11 Up to 16- ch s ynchronou s play back. Sm ar t playback featu re . Continuous capture of vid eo images and playback of captured pictures. Support sele ct main stream , sub stream or transcoded stream as recording stream.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 12 Rem ot ely start/stop re cor ding . Rem ot ely start/stop al arm output. Upg rade by remote FTP se rver is supported. Rem ot e PTZ control. Rem ot e JPEG capture. Two- way voice talk and v oi ce broa dcasting.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 13 2 LOOP OU T BNC connectors fo r video loop output. 3 VIDEO SPOT OUT BNC connectors fo r video outpu t. 4 VIDEO OUT BNC connector for video outpu t . 1. When both HD MI and VG A are connected, it is used for live view only; 2.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 14 16 GROUND Ground (needs to be c onnected when device starts up) . 17 AC 100V~240 V AC 100V~240 V power supply. 18 PO WER Switch for turning on/off the device. 19 USB Universal Serial Bus (USB) ports for additional devices such as USB Hard D isk Drive (HD D).
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 15 2 AUDI O OUT RCA connector for CVBS and VGA audio output. 3 LINE I N RCA connector for audio outpu t . 4 RS -232 Interface Connector for RS- 232 devices. 5 VGA DB9 connector fo r VGA output.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 16 Figure 9 Product Application Diagram Note: DS -9600NI- ST / DS -9600NI- RT /DS-9600NI- XT / DS -7700NI- SP can only connect netwo r k cam eras.
17 Operating Your DVR There are num er ous ways to nav igate and operate your D VR. You may use t he Front Panel Co ntrols, t he included IR (I nfrar ed) Rem ote , a Mouse a nd the Soft Keyboard.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 18 2. IR Receiver: Your DVR may also be contro ll ed with th e i nclud ed IR rem ote c ontrol, shown in F igure 13. Batteries (2XAA A) must be installed befo r e operat i on. 3. Front Panel Lock: You can lock or unlock the panel by t he key .
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 19 • Direction Butto ns: The Direction but t ons ar e used to nav igate between different fields and items in menus. I n playback mode, the Up and D own button is used to fast-forwa r d and rewind recorded v i deo.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 20 • 1/MENU : Enter num er ical “ 1 ” ; Ac cess the main menu interface. • 2ABC/F1: Enter numeral “2” ; Enter le tters “ABC”;.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 21 Figure 13 IR Remote Control The keys on the remote control closely resemble the ones found on t he front pane l. Referring to Figure 13, they include: 1. POWER: Turn on /off DVR . 2. DEV: Enable/Disab le Remote Control.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 22 Aim the rem ote control at t he IR receiver l ocated at th e front of the unit to test operation. If there is no response: 1. Using the front co ntrol panel o r the mouse, g o i nto Menu > System Confi gura tion > General > More Setting s.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 23 Figure 14 Soft Keyboard The buttons on the soft keyboard rep r esents: Switch to U ppercase : Sw itch to uppercase input. Symbols/Number : Switch to sym bols and numbers input. Backspace: Dele te the characte r in front of the cursor.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 24 C H A P T E R 2 Getting Started.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 25 Starting and Shuttin g Down Your DVR Proper startup and sh ut dow n procedures are crucia l to expanding t he life o f your DVR. Startup Your DVR Ensure the powe r supply is plug ged into an elec trical outlet.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 26 Figure 16 Shutdown Menu 2. Select the Shutdown button. 3. Click the Yes bu tton. Note: Do not press the PO WER button again when the sy st em is s hutting down. Rebooting Your DVR While in the Shu tdown menu (Figur e 16), you m ay also reboot your DVR by clic king Reboot.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 27 Setting Date & Time It is extrem ely important to setu p the system date and tim e to ac cura tely timestam p r ecord ings and events. To setup date and t ime as following step s: Steps: 1.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 28 Figure 18 DST Settings Menu 5. To acquire the t i me and da te over an NTP (Netwo rk Time Protocol) Se r ver, ch eck the Enabl e NTP checkbox. You c an set the in terval and en ter your own NTP server.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 29 2. Select the Cam era tab to en ter the Cam era Information m enu t o view the sta tus of each cam era , as shown in Figure 20 . You ca n click the refresh bu tt on to renew the inform ati on di splayed.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 30 4. Select the Alarm t ab to ente r the Alarm Information menu to v i ew the a larm inform ati on, as shown in Figure 22 . You ca n click the refresh bu tt on to renew the inform ati on di splayed.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 31 Figure 24 HDD Information Menu.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 32 C H A P T E R 3 Live Feed.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 33 Watching a Live Fe ed The Live Feed m ode is automatically started a ft er the DVR boots up. I t is also a t the very top of the menu hierarchy, thus hi t ting the E SC button multiple times (depend i ng on w hich menu you’re on) will b r ing you to the Live Feed m ode.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 34 Operating the Live Feed In Live Feed m ode, you may adjust the setting s f or indi vidual cameras by left-clicking on the desir ed display with the m ouse. The selected display will be s ur rounded w i th a g reen border, as shown in F i gure 25.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 35 PTZ Control: If the selected c amera is a P TZ camera, y ou may control it directly f rom the disp l ay . Control a PTZ camera as follow ing steps: Steps: 1. Select the display that corresponds t o a P T Z cam era.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 36 3D-Z oom Im age Centralization Menu 4. Click the Close i con to return to the Liv e Feed m ode. Note: PTZ parameters f or the ca mera must be set correctly bef ore the P T Z can be controlled.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 37 Figure 29 Analog Camera Image Settings Menu Figure 30 IP camera Image Settings Menu 3. For analog cam er a, there ar e f our prese t m odes for selection: Standard, I ndoor, Dim Light and Outdoor.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 38 Figure 31 Image Settings Menu Here we can set adv anced image parameters l ike white balance, exposure , WDR, day / night switch, dig ital noise reduction , backlight c ompensation and v ideo adjustm ent .
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 39 Figure 33 Handle Settings b. Handling : Click the check boxes to select different ways to notify user that transactions beg in. Figure 34 Handle Settings c. P TZ Linking: Selec t the PTZ(s) which will start action (preset, pat rol and pattern) during the transaction.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 40 Figure 35 PTZ Linking d. Overlay Zone: Use mouse to choo se where on the screen should POS information be displayed.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 41 Figure 37 Live Feed Display Menu Menu: Click to g o t o DVR Main Menu. I f the system is locked, you m ust enter the current Adm in password to ex it out of the Liv e Feed. Single Screen/Mul ti -Scree n: Click to switch th e display mode.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 42 Previous Screen / Next Scr ee n: Click to v i ew the prev i ous/next set of di splay. I n a 2x2 mode, this will show the next four d isplay. In a 3x3 mode, this wi ll sho w the next nine dis pl ay.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 43 Before you start Au t o-switc h, you should set D well Tim e i n Live View setting menu by g oi ng to Menu > System C onf iguration > L ive View > Gene ral .
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 44 CVBS Output S t andard: Selec t the output s tandard to NTSC o r PAL, which must be the same with the v ideo input standard. Resolution: Selec t the appropriate re solution. Mouse Pointer Sp eed: Set the speed of mouse pointer and 4 levels are configurable.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 45 Figure 40 Live View Menu The settings av ailable to config ure for each video ou tput include: Video Output Interface: Designates the output i ncluding Main CVBS, HDMI, VGA, and Spot Output1, Spot Output2, Spot Ou t put3 and Spot Output4.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 46 1. Enter the Live View menu, shown in F i gure 41 by going t o Menu > Sy st em C onfiguration > Live View. 2. Select the View t ab. 3. Select the Video Ou tput Interface to configure cam er a order fo r.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 47 2. Check the check box t o ena ble event hint, as show n in figure 43 . Figure 43 Event Hint Setting Menu 3. Select the Event Ty pe Setting s t o configure. The ev ent t ypes inclu de: HDD Full: I f selected, display ev ent information when HDD is full.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 48 C H A P T E R 4 Record Settings.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 49 Configuring Set tings for Recording There are m ul tiple ways to setup your DVR for recordi ng.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 50 7) Set the video qua lity using the Video Qua l ity sl ider. Increasing th e vid eo quality wil l also increase the m ax. bit rate recomm ended. T he m ax. bit rate ca n be ad justed according t o this recomm end .
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 51 Note: You must click t he Apply button after adjus ting the configuration of eac h t ab be fore you m o ve on to adjust another one.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 52 4. Check the Enable Schedule checkbox to ena bl e th e record schedu l e. I f the checkbox is unchecked, the rec or d sche dule will be disabl ed.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 53 Figure 50 Edit Schedule Menu 2) Select a day from Monday to Sunday . 3) Setup time periods fo r sche dule. If the All Day ch eckbox is checked, rec ord i ng w ill occur over the entire day .
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 54 4) Click the Apply but ton to save the set tings or click to exit without sav i ng. 6. Repeat the abov e steps to s et record schedu le for other channels. If the same schedule can b e applied to other ch annels, click th e Copy button to pop -up a Copy to box, as shown in F igure 52.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 55 Configuring Holida y Settings Follow the steps to configure the ho li day se ttings. Steps: 1. Enter the Holiday menu, shown in F i gure 53 by g oi ng to M enu > Recording C onfiguration > Holiday.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 56 Configuring Set tings for Capturin g Configuring Captur e Quality Settings Follow the introd uctions to config ure c aptu re quality setting s.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 57 Figure 56 Capture Schedule Configuration Menu 3. Select the cam er a to con figure from the c amera dropdown list. 4. Check the Enable Schedule checkbox to ena bl e th e capture schedule. I f t he check box is unchecked, the cap t ure schedule w ill be disab led.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 58 C H A P T E R 5 Playback.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 59 Playing Back a Reco rding Previously reco r ded file s can be played back using the Play back Interfac e.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 60 Figure 58 shows som e of th e main features o f the Playback Interface , w hich include: Channel Selector : Select the channel to search for rec ordi ngs on. Calendar: Selec t the date to sea r ch for rec ordings on.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 61 To playback re corded files: 1. Search and selec t recording t o play back in t he Playbac k Interface. 2. Click the Play Forwa r d butt on t o beg in playback of sel ec ted recor ding and the Pau se button to pause playback.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 62 3. In Full-Screen m ode, you may select additional c hannels to play back by clicking t he checkbox next to the desired ca m era in the Channel Se lector panel. P layback will beg i n simultaneou sl y on the selected channe l s.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 63 Figure 61 Smart Playback Menu Smart search In order to locate m oti on de t ection ev ent easily and accurately in the playback progress l.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 64 Figure 62 Picture Playback Interface 3. Select channel on C hannel the dro pdown list. 4. Select picture ty pe for Continues, Ev ent , Captur e or All. 5. Select the start tim e and stop time.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 65 Figure 64 Tag Playback Interface 2. Select channel on th e Channel dropdown list. 3. Select tag type fo r Tag Keyw ord or All. 4. If tag ty pe was Keyword, Key word area was editab le to allow use r to set key words for fast searching.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 66 9. Drag the tim eline to the place y ou want to play. 10. Click to enable or disable t he a udio. 11. Click to play back th e pictures in Full Screen m ode . 12. Click to export sel ected tag s.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 67 In full-screen m ode, if you want to hide the POS infor mation, click on t he button to disable the overlay functi on, as shown below.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 68 C H A P T E R 6 Backup.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 69 Backing up Video Clips Video clips can be backed up to various dev ices, such as USB f lash dr i ves, USB HDDs or a DVD writer.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 70 3. Select the starting position of the video clip by clicking t he desired lo cation on th e bl ue recordings bar. 4. Click the Start but t on. 5. Select the ending position of the video clip, the sam e as starting position.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 71 2. If video clips we re successf ully saved to th e HDD using t he Playback I nterface, they will be listed in the Clip s Export interface. T he cam era number as well as t he tim e range and clip size would be listed.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 72 Backing up Recor ded Files Not only can v i deo clips be backed up, full r ecorded fil es can also be back ed up to a storag e medium. To back up recor ded files: 1. Search for reco rded files using t he File Man agement menu (See Searching fo r Recorded F i les on Page 60 ).
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 73 C H A P T E R 7 System Configura tion.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 74 Configuring Netw ork Settings Network setting s must be configured before y ou’r e able to u se your D V R ov er the network . Configuring Gene ral Settings To configure netwo rk general settings: 1.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 75 3. If you hav e a DHCP server running and would like your DVR to automatically obtain a n IP address and othe r network s ettings from t hat server, check the DHCP check box.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 76 1) Enter Serv er Address for N O -I P. 2) Enter th e domain obtained from the DynDN S website (www.no-ip.com ) in the Do main Name textbox. 3) Enter th e User Nam e a nd Passwor d r egiste r ed in the NO-IP website.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 77 2. Check the Enable UPnP checkbox. 3. Select the Mapp ed Type. There are two types: Auto : Autom at ic mapping port 8000, 80, 554, 443. Manual : Edit the port by click . 4. C lick the Apply button t o sav e the settings.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 78 Enable Telnet: Che ck the Enable Telnet check box. Telnet is used mainly for system maintenance an d debugging . 4. C lick Apply to sav e the network settings and click to return to the p revious menu .
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 79 Figure 80 Edit User Menu 2. Enter the old password i n t he Old Password t extbox. 3. Check the Change Pa ss word check box. 4. Enter the new passwo rd in the Pas sword textbox. 5. You can also enter t he User ’ s MAC o r I P Address of the remote PC.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 80 2. Enter the inform ation for new user, including U ser Nam e, Password, Level and User ’ s MAC or IP Address. Level: Set the user l evel to Guest or Opera t or. Differen t user levels have differen t default operating perm i ssion.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 81 Local Con f iguration: Local Log Search : Searching and viewing logs and system i nformation of D VR. Local Param et ers Settings: C onfiguring param et ers, re storing factory defau lt param eter s and importing/expor ting configuration files.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 82 Editing a User To edit a user: 1. Enter the User m enu, shown in Figure 79 by g oing to Menu > Sy st em Configuration > Us er . 2. Select a user and cl ick to edit user. 3. Edit user info rmation including user name, passwo rd, level and MAC address.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 83 Configuring PTZ Ca meras Configuring Basic PTZ Settings Settings for a P TZ camera m ust be configured before it can be used. Befor e proceeding, verify that the PTZ and RS- 485 of the DV R are connected pro perly.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 84 Figure 86 More Settings of PT Z Configuration 3. Select the cam er a to test in the Camera dropdown list. 4. Using the Direct i onal butto ns and other P TZ control butto ns (Zoom +/-, Focus +/-, Iris +/-, the speed of the PTZ movement), test the functionality of the P TZ camera.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 85 5. To test the newly configured preset, first m ove the PTZ camera to a different p osition. Select Recall Preset an d click on t he preset num ber. The camera s hould m ove to the location that w as set for the selected pres et number.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 86 Configuring Alar ms and Exceptions Setting up Motion Detec tion Set up properly , usi ng m oti on detected recording w i ll increase the num ber of day s your DVR is able to record.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 87 Figure 89 Trigger Channel Settings Menu 1) Select the Trigg er Channel tab and check the checkbox of channe ls which you wa nt the motion detection event to tr igger recording. Click Apply to sav e t he setting .
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 88 Figure 91 Handing Settings Menu To set other action s, including : Full Screen Mon it oring : DVR will display the video i m age in full screen when m otion is detect ed .
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 89 Configuring Alarm I nputs Certain actions can also be perform ed i f an a larm input is triggered. To se t up trig ger actions : 1. Enter the Trig ger menu, shown in Figure 93 by g oing to Menu > R ecording Conf iguration > Trigger.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 90 2) Select the Arm ing Schedule tab. Choose one day in a week and se t an arming schedule. If the schedule can als o be applied to other day s, click Copy. Click Apply to sa ve the se ttings.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 91 4. Edit the Alarm Name. 5. Select the Dwe ll Time. 6. Setup arming sc hedule for t he alarm output by click Handing Set. Choose one day in a week and set an arm i ng schedule. I f the schedule can a lso be applied to other day s, click Copy .
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 92 Record/Captur e E xception: I f sel ected, t rigger action when record / captu re exception is detected. Hot Spare Except i on: I f selected, trigg er acti on when Hot Spare Exception is det ected.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 93 Enable Server Au t hentica tion: Enable if email server requires authent i cation. En abling Server Authentic ating will ena ble the Use r Nam e and Password fields. User Name: User n ame to use for server auth entication.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 94 2. Choose the work mode of current DVR. Norm al Mode indicates this DVR wo rk as usual way.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 95 Figure 101 RS232 Setting b. For the TCP Li sten mode, Click Set to en ter TCP L i sten Setting s as follows. Figure 102 TCP Setting Note: The IP Addre ss should be ex actly the same as the IP Addr ess of POS terminal.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 96 c. For the TCP Rec eive mode, Cl ick Set to Netwo rk Receive Se ttings as follows. Note: The port shou ld be exactly the same as the po rt of POS terminal ; you can click and edit it via virtual keyboard ( The default port numbe r is 10000).
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 97 Figure 105 POS Setting 2) End Line Identifi er : You can edit the End Line I dent ifier string when the transac tion data should be finished t o display on the video.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 98 Figure 106 POS Setting 7) Ignore Line: Cl ick to select how m any strings of transactional dat a shall be ig nored to display on the v i deo (Maxi mum is four). And then clic k lower blank to edit the ignore character throug h t he virtua l keyboard as fol lows.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 99 Key Mode String Mode Value Mode.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 100 Once selected th e filter, click Up and Down to mov e the filter up and down i n the list. The upper the filter, the hi gher the priority th is filter has. I f a POS event matches some fi lters, it will be labeled by the filter name which is l isted on the top.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 101 C H A P T E R 8 Camera Managem ent.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 102 Configuring Camera s Adding and Remov ing IP Cameras Depending on the m odel of your DVR, IP cam eras can be setup and used i n conju nction with reg ular analog cameras. Before configur i ng I P ca m eras, please ensure the netw ork settings for your D VR is properly setup.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 103 Figure 111 Protocol Management Settings Menu 8. If the I P camera is not onlin e, you can enter th e IP addr ess, protocol, config uration port, camera user name and oth er inform ation on the left side of the interface.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 104 Figure 113 IP Camera Management Menu The added cameras will display in a list. You can also configure the added cam er a. To config ure added camera: 1. Click in the added cam era list to pop up an Ed it IP C amera menu, as shown in Fi gure 114.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 105 Figure 115 Advance Settings Menu 5. Select the Network t ab to m odif y the I P Ca m era Address and Config ur ation Por t . Click Apply to save the setting s. 6. Select Password t ab to chan ge the password.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 106 Adding and Remov ing Analog Cameras Analog cam er as can be ena bl ed and disabled in the Ca meras m enu. To manage ana log cameras : 1. Enter the Cam er as menu by going to Menu > Cam eras Setup > Cameras.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 107 IP cameras List Imp ort and Export The added I P camera list can be im ported and export ed in the Cam er a menu. To export I P camera list: 1. Enter the Cam er as menu by going to Menu > Cameras Setup > Cameras.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 108 PoE Information Detailed PoE powe r consum pti on inform ation and configuratio n can be accesse d in this tab. To access the PoE in f orm ation: 1. Enter the Cam er as menu by going to Menu > Cameras Setup > Cameras.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 109 Configuring Privac y Ma sk Privacy Mask can be setup to mask off sensi tive or priv ate a reas in the field of v i ew of a c amera. To configure privacy zones: 1. Enter the Priv acy Mask m e nu, shown in F i gure 120 by going to Menu > Cameras Setup > Privacy Mask .
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 110 Figure 121 Video Tamper-proof Detection Menu 2. Select the cam er a to setup video tampering detection in using the camera dropdo wn l ist. 3. Check the Enable T am per-proof checkbox. 4. Adjust the Sensi t ivity fo r video tam pering detection.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 111 Configuring Vi deo Loss Video loss detec t ion can be enabled on any of the chan nels on your DVR t o dete ct the loss of vide o. To configure video l oss det ec tion: 1. Enter the Video Los s menu, shown in Figure 122 by g oing to Menu > Cam eras Setup > Video Loss.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 112 Figure 123 OSD Configuration Menu 2. Select the cam er a to setup OSD configuration in using the camera dropdown list. 3. Configure OSD s ettings, in cluding: Camera Name : Name of selected cam era.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 113 Figure 124 Video Quality Diagnosis Configuration Menu 5. Select the cam er a to setup Vid eo Quality D iagnosis configuratio n in using the c am er a dropdown list. 6. Check the Enable Video Quality Diagnosis check box to enable this function.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 114 Figure 125 VCA Menu 12. Select the cam er a to setup VCA in using the cam er a dropdown list. 13. Click Enable VCA . 14. Press the Handing Set butto n to set up handing method. 3) Select the Arm ing Schedule tab to set the arm ing schedule.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 115 C H A P T E R 9 RAID Configurat ion.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 116 Configuring Array a nd Virtual Disk RAID (redundan t array of independ ent disks) is a storag e tec hnolog y that combines m ultiple disk drive components into a l ogical unit.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 117 Figure 127 One-touch Array Configuration 3. Edit the array nam e in t he Array Name text box and cl ick OK to start con figuratio n the array. 4. There will pop- up an Attention box when the array configuration is com pleted.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 118 3. Edit the Array N ame. 4. Select the RAI D Level from RAI D 0, RAID 1, RAID 5 and RAI D 10. 5. Check the check box of corresponding disk to selec t the Phy si cal Disk tha t you want to con fi gure array.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 119 15. After the virtual di sk has been initia l ized, the status will chang e f rom Uninitialized to Normal. 16. Enter the Physical Di sk interface t o configure the hot spare disk if y ou have installed the fourth disk.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 120 Note: The device suppo rts creating at m ost 8 virtual disks. Note: It is recomm eded to create one virtual disk of an array. Rebuilding Array The working sta tus of array includes Functiona l , Degra ded and Offline.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 121 If there is no hot s pare disk after r ebuilding , it is recom mended to install a HDD into th e device and set is as a hot spare disk to ensure the high security and r eliability of the array.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 122 1. Enter the Virtual Di sk interface by going t o Menu > S ystem Configuration > RAID > Virtual Disk Figure 137 Virtual Disk Interface 2. Click to repair the v ir tual d i sk. 3. After successfu lly repairing , t he following attention box will pop up.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 123 Note: Deleting array will cause to delete all the da ta in the array . Migrating and Expa nding When the rem ai ning storag e space is lower than the ac t ual needs, y ou can take array m igration and online expansion to enla rge the capaci ty of the virtua l disk.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 124 8. Enter the HDD Inform at ion interface afte r rebooting by going t o Menu > Sy st em C onfiguration > HDD > HD D Information. 9. Select an expandab l e virtua l disk and click th e Expand button to expand the c apacity of the virtual disk.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 125 1. Enter the Firm ware i nterface to c hec k th e information of t he f irmware, includi ng the version, maximum physical disk quantity , maxim u m array quantity , aut o-rebuild status, et c.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 126 C H A P T E R 10 Disk Manageme nt.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 127 Managing Disks Checking Disk Status The status of all i nstalled h ard disk drives (HDD) and Network hard dr i ves can be checked und er the HD D menu. To check the s tatus of insta l led disk s: 1.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 128 Figure 149 Add NetHDD Menu 3. Select the num ber and the type of network hard d r ive. Then enter in the I P address and the directory of netw ork hard d rives. 4. If you do not k now the directory of network hard d rives, you can cli ck Search after y ou ent er t he IP address.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 129 Formatting Disk A newly installed hard disk driv e (HDD) m ust be first form at ted befor e it can be used wi t h your D V R. Formatting the di sk will era se all data on it. To format a new di sk: 1.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 130 4. Click the Apply but ton. 5. Click to exit. Enabling HDD Sleepin g mode Enabling HDD sleeping mode will allow the H DD enter low pow er cost w ork m ode when no recording work is detected.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 131 Export: Use the eSA TA for backup. Record/Captur e: Use the eSATA f or record/cap ture. 4. C lick the Apply button t o sav e the settings. Configuring Qu ota Mode Each camera can b e configured with al located quota for recor d or picture capture .
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 132 Figure 155 Group Mode Settings Menu 4. Click the Apply but t on to p op up an attention box as shown bel ow: Figure 156 Attention for reboot 5. Click Yes to reboo t and mak e t he settings ef fective.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 133 At least 2 hard d i sks m ust be installed when you w ant to set a HDD t o Redundan cy mode and one of them with R/W property . Disk Clone Internal HDDs ca n be backup to e xternal eSATA H DDs intact using t his funct ion.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 134 HDD Detect The device prov ides the HD D detection function such as the ad opting of the S.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 135 Figure 160 Bad Sector Detection Interface 3. Select the HDD y ou want to configure in the d ropdown list. 4. Choose Key Area De t ect ion or All De tection. 5. Click the Detect button to start the de t ect ion.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 136 Managing Files Searching for Record ed Files Previously reco r ded file s can be searched by criteria in the File Managem ent menu. To search for al l recorded f iles: 1. Enter the File Manag ement menu, shown in F i gure 161 by going to Menu > Fil e Managem ent > Record.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 137 Figure 162 Search Result Interface 8. You may now pl ay the selected file by clicking the Play button next to the fi le. 9. The record ed fi les can also be exported into a USB storag e device.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 138 If you select t ype Motion: 1) First you need to choose the cam eras that you would lik e t o include in the search. Analog cameras are lis ted on the first row , preceded wi th the letter A.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 139 Searching for POS event files Search and view POS ev ents stored in HDD. To search for spe cified POS events: 1. Enter File Managem ent menu by going to Menu>File Managem ent>POS. Figure 165 POS events a.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 140 Approx i mate mat ch Click to selec t Approximat e match, and then type in t he k eywords you want to search.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 141 d. The search result wi l l show l ike the in t erface b el ow. Figure 166 POS search result 1) All results not confirmed w ill be mark e.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 142 Figure 167 POS event flag Cl ick on Event Flag to ch oose kind of Flag w hich indicates the att ribute of this P OS record. You can also leav e notes in Notes box, which can be s ea rched by keyw ords in file m ana gem ent system and playback feature.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 143 Locking and Unlocki ng Recorded Files To lock and unlo ck recorded fi les: 1. Search for reco rded files using the F i le Manag ement menu. 2. Select the file y ou would li ke to lock/unlock.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 144 C H A P T E R 1 1 DVR Manageme nt.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 145 Managing System Upgrading the System Firmware The system firm ware for your DVR can b e updated fro m a USB storage device or FTP. To update the syst em firmw ar e from a USB storage dev i ce: 1.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 146 Figure 170 FTP Upgrade Menu 3. Enter the FTP Se rver Address. 4. Click the Upg r ade button t o upgrade the D VR. The DVR will autom atically reboot after the upgrade is com pl eted. Restoring Default Se ttings To restore fac tory default setting s t o your D V R: 1.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 147 Figure 171 Factory Default Menu 2. Select the OK bu t ton to re store factory defaults or selec t to return to the previous menu. Note: Network inform at ion such as IP address, subnet m ask and gateway will not be restore d.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 148 Exporting & Importi ng Configuration Configuration in formation f rom your DVR can be expo rted to a USB storag e de vic e and imported into another DVR. T his will al low you to ef ficiently setup the s ame configur ation on n umerous DVRs.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 149 Viewing System Log s Many events of y our DVR are logged into the sy st em logs. To access the syst em logs and search for these events: 1. Enter the System Logs menu, shown in Figure 173 by going t o Menu > Main t enance > Syst em Logs.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 150 Figure 174 Log Search Results 6. Click under the De tail item to view th e detail information, as shown i n Figure 175. Figure 175 Log Information 7. Click Previous/Nex t to v iew the previous/nex t log inform at ion.
151 Network detection You can view the n et work t raffic to obtain real-time inform at ion and con necting st atus of your D VR. To view netwo rk traffic: 1. Enter the Netwo rk Detection m enu by going t o Menu > System Ma intenance > Network Detection.
DS -7700NI-SP/ 90 00/9600 Series HDVR/NV R User’s Manual 152 3. Enter the destina tion address in the text field of Destin ation Address. 4. Click the Test bu t ton to st art testing network average delay and p acket loss rate. The testing resu lt will pop up on the win dow.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Hikvision DS-9664NI-ST c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Hikvision DS-9664NI-ST - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Hikvision DS-9664NI-ST, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Hikvision DS-9664NI-ST va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Hikvision DS-9664NI-ST, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Hikvision DS-9664NI-ST.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Hikvision DS-9664NI-ST. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Hikvision DS-9664NI-ST ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
