Manuel d'utilisation / d'entretien du produit DS-7308HWI-SH du fabricant Hikvision
Aller à la page of 225
User Manual of DS -7200/73 00 /8100 Series DVR 1 Digit al V ideo R ec or der U ser Manual UD.6L0202D1 966A01.
User Manual of DS -7200/73 00 /8100 Series DVR 2 User Ma nual COPYRIG HT © 2015 Hangzhou Hikvision Digi tal T echnology Co., L td. ALL RIGHT S RESER VED. Any and all information, in cluding, among o thers, w ordings, pictures, graphs are the properties of Hangzhou Hikvision Digital T e chnology Co.
User Manual of DS -7200/73 00 /8100 Series DVR 3 Regulator y Informat ion FCC Infor mation FCC compli ance: This equipment has been tested and found to com ply with the limits for a Class A dig ital device, pu rsuant to part 15 of the F CC Rules.
User Manual of DS -7200/73 00 /8100 Series DVR 4 Safety Instr uction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “W arnings” and “Cautions”.
User Manual of DS -7200/73 00 /8100 Series DVR 5 Pr eventive and C autionary T ips Before connecting and operating y our device, please be advised of the following tips: • Ensure unit is installed in a well-ventilated, dust-free environment. • Unit is designed for indoor use only .
User Manual of DS -7200/73 00 /8100 Series DVR 6 Thank you for p urchasing our product. If there is any question o r requ est, please d o not h esitate to con tact dealer .
User Manual of DS -7200/73 00 /8100 Series DVR 7 Preventive and Ca utionary Tips Before connecting and operating y our device, please be advised of the following tips: • Ensure unit is installed in a well-ventilated, dust-free environment. • Unit is designed for indoor use only.
User Manual of DS -7200/73 00 /8100 Series DVR 8 Product Key Features General Connectable to th e network cameras and network domes (th is feature is support ed by HDVR series). Connectable to the Coaxitron camera/dome for DS-7200HWI-E1(2) /C , DS-7200HWI-E1(2) /C /F , DS -7300HWI-E4/C and DS - 81 00 HWI- E4 (8)/C series.
User Manual of DS -7200/73 00 /8100 Series DVR 9 HDD group management. Support HDD standby function. HDD property: redundancy , read -only , read/write (R/W). HDD quota management; dif ferent capacity can be assigned to diff erent channel.
User Manual of DS -7200/73 00 /8100 Series DVR 10 Support alarm push notification (live video or p layback ) on the linked mobile phones when alarm event occurs. The mobile phone must b e installed with the iVMS -4500 client software and the alarm pu sh fun ction is enabled.
User Manual of DS -7200/73 00 /8100 Series DVR 11 T ABLE OF CONTENTS Product K ey Feat ures 8 Chapter 1Introducti on 15 1.1 Front Panel 16 1.2 IR Rem ote Control Oper ations 21 1.3 USB Mouse Operation 23 1.4 Input Met hod Description 23 1.5 Rear Panel 25 Chapter 2Getting S tarted 31 2.
User Manual of DS -7200/73 00 /8100 Series DVR 12 5.3 Configuring Motion Detect ion Record 87 5.4 Configuring Alarm Tri ggered Record 91 5.5 Configuring VCA Record 94 5.6 Configuring Manual Record 96 5.7 Configuring Holiday Record 97 5.8 Configuring Redundant Rec ord 99 5.
User Manual of DS -7200/73 00 /8100 Series DVR 13 9.2.2 Configuri ng PPPoE Settings 166 9.2.3 Configuri ng NTP Server 167 9.2.4 Configuri ng SNM P 167 9.2.5 Configuri ng NA T 168 9.2.6 Configure More Setti ngs 171 9.2.7 Configuri ng HTTPS S etti ngs 172 9.
User Manual of DS -7200/73 00 /8100 Series DVR 14 13.5.2 Deleting a User 218 13.5.3 Editing a User 218 Chapter 14Appendix 220 List of Compatibl e Hikvision I P Cameras 221 Glossary 222 T roubleshoot i.
User Manual of DS -7200/73 00 /8100 Series DVR 15 Chapter 1 Intr od uction.
User Manual of DS -7200/73 00 /8100 Series DVR 16 1.1 Fr o nt Panel DS -7200 : The front panel of DS-7200 series DVR is shown in Figure 1.1: Figure 1.1 Fr ont P an el of DS- 7200 Table 1.1 Descrip t ion of Cont rol Panel But tons No. Name Function Description 1 POWER POWER indicator turns green when DVR is powe red up.
User Manual of DS -7200/73 00 /8100 Series DVR 17 No. Name Function Description address from 1~254; Indicator turns red when the SHIFT button is used; Indicator does not light when the DVR is controll.
User Manual of DS -7200/73 00 /8100 Series DVR 18 No. Name Function Description Enter letters “WXYZ”; Multi-camera display in live view; In Playback mode or Menu Pl ay back T ag playback interface, this bu tton can be used to delete the selected tag.
User Manual of DS -7200/73 00 /8100 Series DVR 19 Table 1.3 Descrip t ion of Cont rol Panel But tons No. Name Function Description 1 POWER ON/OFF Power on/off sw it ch. 2 IR Receiver Receiver for IR remote control. 3 USB Connect to USB mouse or USB flash mem ory devices.
User Manual of DS -7200/73 00 /8100 Series DVR 20 No. Name Function Description in menus. In Playback mode, the Up and Down button is used to speed up and slow down recorded video.
User Manual of DS -7200/73 00 /8100 Series DVR 21 1.2 IR Remote Contr ol Operati ons The device may also be controlled with the included IR rem o te control, shown in Figure 1.4. Batteries (2× AAA) must be installed before operati on. Figure 1.4 Remote Cont rol Table 1.
User Manual of DS -7200/73 00 /8100 Series DVR 22 No. Name Description In PTZ control settings, press the REC bu tton and then you can call a PTZ preset by pressing Numeric button. 7 PLAY Button Entering the All-day Playback menu. 8 INFO Button Reserved.
User Manual of DS -7200/73 00 /8100 Series DVR 23 1.3 USB Mouse O peration A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this device. To use a USB mouse: 1. P lug USB mouse into one of the USB interf aces on the front panel of the device.
.
User Manual of DS -7200/73 00 /8100 Series DVR 25 1.5 Rear Panel DS -7204: The rear panel of DS -7204 DVR is shown in Figure 1.6. Figure 1.6 Rear P an el of DS - 7204 DS -7216: The rear panel of DS -7216 DVR is sho wn in Figure 1.7. Figure 1.7 Rear P an el of DS - 7216 The rear panel of DS -7208 provides 8 video input interfaces.
User Manual of DS -7200/73 00 /8100 Series DVR 26 DS -7232: The rear panel of DS - 7232 is shown in Figure 1.8. 1 2 3 4 5 6 7 8 9 10 11 12 13 Figure 1.8 Rear P an el of DS - 7232 The rear panel of DS -7224 provides 24 video input interfaces. Table 1.8 Description of Rear P an el No.
User Manual of DS -7200/73 00 /8100 Series DVR 27 Table 1.9 Description of Rear P an el No. Item Description 1 VIDEO IN BN C connector for analog video input. 2 MAIN VIDEO O UT BNC connector for video output. SPOT V IDEO OUT BNC connector for spot video output.
User Manual of DS -7200/73 00 /8100 Series DVR 28 7 HDMI HDMI video output. 8 USB Interface Connects USB mouse or USB flash mem ory devices. 9 LAN Interface RJ45 10M/100M/1000M Ethernet interface. 10 RS -232 Connector for RS-232 devices. 11 T ermination Switch RS -485 termination switch.
User Manual of DS -7200/73 00 /8100 Series DVR 29 8 VGA DB15 connector for VGA output. Display local video output and menu. 9 eSA T A Connects external SA T A HDD, DV D-R/W . 10 HDMI HDMI video output. 11 USB Interface Connects USB mouse or USB flash mem ory devices.
User Manual of DS -7200/73 00 /8100 Series DVR 30 9 HDMI HDMI video output. 10 USB Interface Connects USB mouse or USB flash mem ory devices. 11 LAN1/LAN2 Interface 2 RJ45 10M/100M/1000M Ethernet interfaces. 12 eSA T A Connects external SA T A HDD, DV D-R/W .
User Manual of DS -7200/73 00 /8100 Series DVR 31 Chapter 2 Getting S tarted.
User Manual of DS -7200/73 00 /8100 Series DVR 32 2.1 S tarting Up and Shutting Down the Device Purpose: Proper startup and shutdown procedures are crucial to expanding th e life of the d evice.
User Manual of DS -7200/73 00 /8100 Series DVR 33 2.2 Setting the Admin Passw ord Purpose: For the first-time access, you need to activate the d evice by setting an ad min p assword. No operation is allowed before activation. Y ou can also activate the device v ia W eb Browser , SADP or Client Softw are.
User Manual of DS -7200/73 00 /8100 Series DVR 34 2.3 Using the Wiz ard for Basic Configuration The Setup Wizard can walk you through some important settin gs of the device. By de fault, the Setup Wizard starts once the device has loaded. By default, the Setup Wizard starts once the device has loaded.
User Manual of DS -7200/73 00 /8100 Series DVR 35 Figure 2. 7 Network Co nfiguration The DS-7204/7208/7216 models provide one 10M/100Mbps self-adaptive network interface, the DS -7224/7232, DS-7300 an.
User Manual of DS -7200/73 00 /8100 Series DVR 36 Figure 2. 9 HDD Manag ement 7. Cli c k Next to enter the IP Came ra Management windo w (only supported by HDVR series ). Figure 2. 10 IP Camera Ma nagement 8. Cli ck Sear ch to search IP Cam era. Click Ad d to add IP Cam era (only suppo rted by HDVR series ).
User Manual of DS -7200/73 00 /8100 Series DVR 37 Figure 2. 11 Record Setti ngs 4) Click Cop y to copy the record settings of the current came ra to other camera (s) if needed. Figure 2. 12 Copy Record Settings 5) Click OK to return to the Record Settings window.
User Manual of DS -7200/73 00 /8100 Series DVR 38 2.4 Adding and Connec ting the IP Cameras This Chapter is available for the HDVR models only. Purpose: The HDVR series can be connected with the network cameras and record the video from them.
User Manual of DS -7200/73 00 /8100 Series DVR 39 Figure 2. 14 Activate the Camera 3. Set the password of the camera to activate it. Use Admin Password: when you check the checkbox, the camera (s) will b e configured w ith th e sa me admin password of the operating NVR.
User Manual of DS -7200/73 00 /8100 Series DVR 40 OPTION 1: S teps: 1. Select the Add IP Camera op tion from the ri ght-click menu in live view mode or click Menu> Camera> Camera to enter the IP camera management interfa ce. Figure 2. 16 Adding IP Camera Int erface 2.
User Manual of DS -7200/73 00 /8100 Series DVR 41 OPTION 2: S teps: 1) On th e IP Camera M anagement in terface, clic k the Custom A dding bu tton to pop up the Add IP Camera (Custom) interface.
User Manual of DS -7200/73 00 /8100 Series DVR 42 For the 4- ch HDVR, 1 IP cam era can be add ed, and for the 8-ch and 16 -ch HDVR, 2 IP came ras can be added. Table 2. 1 Explanation of the icons Icon Explanation Icon Explanation Edit basic parameters of the camera Add the detected IP camera.
User Manual of DS -7200/73 00 /8100 Series DVR 43 Figure 2. 21 Network Configuration of the Camera 2. Y ou can edit the network information and the passw ord of the camera. Figure 2. 22 Password Configuratio n of the Camera 3. Click OK to save the settings and exit the interface.
User Manual of DS -7200/73 00 /8100 Series DVR 44 2.5 Login and Logout 2.5.1 User Log in Purpose: If the device has logged out, you m ust login th e device bef ore operating the menu and other functions. S teps: 1. Select the User Name in the dropdown list.
User Manual of DS -7200/73 00 /8100 Series DVR 45 Figure 2. 25 Logout 2. Click Logout . After you have logged out the system, menu operation on the screen is invalid.
User Manual of DS -7200/73 00 /8100 Series DVR 46 Chapter 3 Live V iew.
User Manual of DS -7200/73 00 /8100 Series DVR 47 3.1 Intr oduction of Live V iew Live view shows you the video imag e getting from each camera in real tim e.
User Manual of DS -7200/73 00 /8100 Series DVR 48 3.2 Operations in Li ve V iew Mode In live view mode, the following functions can be realized: • Single Screen : showing only one screen on the monitor. • Multi-screen: showing multiple screens on the monitor simultaneously.
User Manual of DS -7200/73 00 /8100 Series DVR 49 Figure 3. 1 Right-c lick Menu Table 3. 3 Mous e Operation in Live Vie w Name Description Menu Enter the main menu of the system by right-clicking the mouse. Single Screen Switch to the single full screen by choosing channel number from the dropdown list.
User Manual of DS -7200/73 00 /8100 Series DVR 50 switch to CVBS output as the main output. S teps: 1. Use the mouse wheel to double -click on the HDMI/VGA output screen, and the following me ssage box pops up: Figure 3. 2 Switch Mai n and Aux Output 2.
User Manual of DS -7200/73 00 /8100 Series DVR 51 Close Face Detection (for DS -7200HWI-E1(2)/C/F) Instant Playback Instant Playback only shows the record in last fiv e minutes. If no record is found, it means there is no record during the last five minute s.
User Manual of DS -7200/73 00 /8100 Series DVR 52 Figure 3. 6 Image Settings 3. Adjust t he image parameters including the brightness, contrast, saturation, hue, sharpness level and denoising level by moving the sliding bar or increasing/decreasing the value.
User Manual of DS -7200/73 00 /8100 Series DVR 53 3.2.5 Face Detection Purpose: For DS -7200HWI-E1(2)/C/F series, the face detection is supported. Face detection function can be used to detect the human faces in live v iew mode and save in HDD . Before you start: Th e HDD must be in stalled to the dev ice.
User Manual of DS -7200/73 00 /8100 Series DVR 54 3.3 Configuring Live V iew Settings Purpose: Live View settings can be customized according to different needs. You can configure the output interf ace, dwell time for screen to be shown, m ute or turning on the audio, the sc reen number for each channel, etc.
User Manual of DS -7200/73 00 /8100 Series DVR 55 Main CVBS and Spot Output 1. The Spot Output 1 is provided for DS- 7300 -SH and DS- 8100 -SH models. Full Screen Monitoring Dwell Time: The time in seconds to show alarm event screen. 2. Setting Camera Order Figure 3.
User Manual of DS -7200/73 00 /8100 Series DVR 56 3.4 Channel-zer o Encoding Purpose: Sometimes you need to get a remote view o f many channels in real tim e from web browser or CMS (Client Management.
User Manual of DS -7200/73 00 /8100 Series DVR 57 3.5 Manual V ideo Quality Dia gnostics Purpose: The video q uality o f the analog cameras can be diagnosed manually and you can view th e diagnostic results from a list. The DS -7200HWI-E1(2)/C/F does not support video quality diagnostics.
User Manual of DS -7200/73 00 /8100 Series DVR 58 Chapter 4 PTZ Contr ols.
User Manual of DS -7200/73 00 /8100 Series DVR 59 4.1 Configuring PTZ Setting s (A) This section is applied to the Netw ork HDVR an d Network DVR series . Purpose: Follow the procedure to set the parameters for PTZ. The configuring of the P TZ param eters should be done before you control the PTZ camera.
User Manual of DS -7200/73 00 /8100 Series DVR 60 Cust o mizing Pr eset s Purpose: Follow the steps to set the Preset location which you want the PTZ came ra to poin t to when an event takes place. Steps: 1. Enter th e PTZ Control interfac e. Menu>Camera>PTZ>More Settings Figure 4.
User Manual of DS -7200/73 00 /8100 Series DVR 61 1. Enter th e PTZ Control interfac e. Menu>Camera>PTZ>More Settings 2. Check the round icon before Call Preset .
User Manual of DS -7200/73 00 /8100 Series DVR 62 2. Choo se C am era in the list on the menu. 3. Choo se preset in the Preset list. Cust o mizing P at r ol s Purpose: Patrols can be set to move the PTZ to diff erent key points and have it stay there f or a set duratio n before moving on to the next key point.
User Manual of DS -7200/73 00 /8100 Series DVR 63 Repeat the above steps to add more key points. You can also delete all the key points by clic king the trash icon Figure 4. 8 KeyPoints Del etion Calling Patrols Purpose: Calling a patrol makes the PTZ to move accordin g the predefined patrol path.
User Manual of DS -7200/73 00 /8100 Series DVR 64 Steps: 1. Press PTZ control on the IR remote, or click PTZ Control icon on the quick setting toolbar, to show the PTZ control toolbar . 2. Choose Patrol on the control bar . 3. Click the patrol you want to call.
User Manual of DS -7200/73 00 /8100 Series DVR 65 3. Click , and u se your mouse to drag the image or click the eight directional button s in the control box under the image to move the PTZ cam era. The movement of the PTZ is recorded as the pattern. 4.
User Manual of DS -7200/73 00 /8100 Series DVR 66 4.2.2 PTZ Control Panel In the Live V iew mode, you can press th e PTZ Control button on the IR remote control, o r choose th e PTZ Control icon to enter the PTZ toolbar . Figure 4. 14 PTZ Toolbar Table 4.
User Manual of DS -7200/73 00 /8100 Series DVR 67 4.2 Configuring PTZ Setting s (B) This section is applied to the Smart/Coaxitron HDVR and Sm art DVR /HDVR series . Purpose: Follow the procedure to set the parameters for PTZ. The configuring of the P TZ param eters should be don e before you control the PTZ came ra.
User Manual of DS -7200/73 00 /8100 Series DVR 68 Figure 4. 16 RS -485 Settings All the parameters should be exactly the same as the PTZ camera parameters. Only P TZ Protocol can be configured for network cameras. Example: If the PTZ camera has a Baud rate as 1 15200, you should input 1 15200 in the Baud Rate field.
User Manual of DS -7200/73 00 /8100 Series DVR 69 4.2.1 Setting PTZ Presets, Patrols & Patterns Before you start: Make sure that the presets, patrols and patterns should be supported by PTZ protocols. Cust o mizing Pr eset s Purpose: A preset is a predefined image positio n which contains informa tion of pan, tilt, focus and other parameters.
User Manual of DS -7200/73 00 /8100 Series DVR 70 Calli ng Pres et s Purpose: The view angle of the PTZ camera w ill be moved to the predefined position when you call a preset.
User Manual of DS -7200/73 00 /8100 Series DVR 71 Figure 4. 19 PT Z Settings-Customize P atrol 2. Select the camera for PTZ setting from the drop-down list. 3. Select patrol number from the drop -down list. 4. Click the button S et under the Patrol item to open Key Point settings interface.
User Manual of DS -7200/73 00 /8100 Series DVR 72 1. Click the button in the lower-right corner of the PTZ setting interf ace; or press the PTZ button on the front panel; or click the PTZ Control icon.
User Manual of DS -7200/73 00 /8100 Series DVR 73 Figure 4. 22 PT Z Settings-Customize P attern 2. Select the camera for PTZ setting from the drop-down list.
User Manual of DS -7200/73 00 /8100 Series DVR 74 Figure 4. 23 Control P anel-Call Pattern 4.2.2 Configuring Line ar Scan Cust o mizing Li near Scan Purpose: T wo limit points can be set for the view of the PTZ camera, and then the PTZ camera can horizontally auto scan between the two predefined limits.
User Manual of DS -7200/73 00 /8100 Series DVR 75 3. Use the directional and zoom / focus / iri s buttons on the PTZ control panel to steer the came ra to th e desired view, and click the button Left Limit / Right Lim it to set th e left / right limit point.
User Manual of DS -7200/73 00 /8100 Series DVR 76 4. There are 3 one-touch park types selectable. Click the corresponding button to activate the p ark action. Park (Quick Patrol): The PTZ camera starts the quick patrol (from preset 1 to preset 32 in order) automatically after the park time.
User Manual of DS -7200/73 00 /8100 Series DVR 77 Figure 4. 27 PT Z Panel Table 4. 2 Descrip tion of the PT Z panel icons Icon Description Icon Description Icon Description Direction button and auto-c.
User Manual of DS -7200/73 00 /8100 Series DVR 78 Chapter 5 Record Settings.
User Manual of DS -7200/73 00 /8100 Series DVR 79 5.1 Co nfiguring Encoding P arameters Purpose: By configuring the encoding parameters you can define the transmission stream type, the resolution and so on. Before you st art: 1. Make sure that th e HDD has already been installed.
User Manual of DS -7200/73 00 /8100 Series DVR 80 Figure 5. 3 (1) Encodin g Parameters-M ain Stream (A nalog Camera) Figure 5. 4 (2) Encodin g Parameters-M ain Stream (IP Ca mera) 2. Set encod ing param eters for main stream 1) Select Record to enter the main stream settings interface.
User Manual of DS -7200/73 00 /8100 Series DVR 81 (Event) : S tream T ype: Set the stream type to be V ideo or V ideo & Audio. Resolution: Se t recording at resolution of WD1, 4CIF , 2CIF , CIF or QCIF . Bitrate T ype: Set the bitrate type to be V ariable or Constant.
User Manual of DS -7200/73 00 /8100 Series DVR 82 Enable 960M ode: Enable the enc oding at WD1 (P AL: 960× 576, NTSC: 96 0× 480 ) resolution for the analog cameras.
User Manual of DS -7200/73 00 /8100 Series DVR 83 5.2 Configuring Recor d Schedule Purpose: Set th e record schedule, and then the camera automatically start s/stops recording according to the configured schedule. Steps: 1. Enter th e Record Schedule interf ace.
User Manual of DS -7200/73 00 /8100 Series DVR 84 The VCA recordin g type is supported by the Smart DVR/HDVR series only . The Alar m, Motion/Alarm and Motion & Alarm recording ty pes are supported by the DS -7224/7232, DS-7300 and DS-8100 series only .
User Manual of DS -7200/73 00 /8100 Series DVR 85 Figure 5. 11 Holiday Setti ngs 6) Click OK to save setting and back to upper level menu. T ask 2: Draw the Schedule S teps: 1) Click the icon on the right to select a record type . Different recording types are available for diff erent models.
User Manual of DS -7200/73 00 /8100 Series DVR 86 3) Y ou can repeat the above steps to set schedule for other channels. If the settings can also be used to other channels, click Copy to enter th e Copy Camera in terface and then choose the channel to which you want to copy .
User Manual of DS -7200/73 00 /8100 Series DVR 87 5.3 Configuring Motion Detection Recor d Purpose: Follow th e steps to set the m otion detection parameters. In th e live view mode, once a motion detection event takes place, the device can analyze it and perf orm some re sponse actions to handle it.
User Manual of DS -7200/73 00 /8100 Series DVR 88 Figure 5. 15 Motion Detecti on- Mask 4) Click the beside Settings and the message box for channel information will pop up. Figure 5. 16 Motion Detecti on Handling The IP Camera is supported by HDVR series only.
User Manual of DS -7200/73 00 /8100 Series DVR 89 Figure 5. 17 Record Schedul e The VCA record ing type is supported by the Sm art DVR/HDVR series only .
User Manual of DS -7200/73 00 /8100 Series DVR 90 Figure 5. 19 Copy Sch edule to Other Days 7) Click OK to back to upper level menu. If you can to copy th e same schedule settings to o ther camera (s), click Co py to enter the Copy Camera interface , and then select the camera (s) you want to copy .
User Manual of DS -7200/73 00 /8100 Series DVR 91 5.4 Configuring Alarm T rigger ed Record This section is available for DS -7224/7332 , DS -7300 , DS -8100 and HDVR models only . Purpose: Follow the procedure to configure alarm triggered recording. S teps: 1.
User Manual of DS -7200/73 00 /8100 Series DVR 92 Figure 5. 23 Al arm Handling The IP Camera is supported by HDVR series only. 5) Choo se the alarm triggered recording channel. 6) Check the checkbox to select channel. 7) Click Apply to save settings. 8) Click OK to back to the upper level menu.
User Manual of DS -7200/73 00 /8100 Series DVR 93 Figure 5. 25 Record Schedul e The VCA record ing type is supported by the Sm art DVR/HDVR series only .
User Manual of DS -7200/73 00 /8100 Series DVR 94 5.5 Configuring VCA Record Purpose: The face dete ction VCA event is su pported by DS -7200 HWI-E1(2)/C/F , and the line crossing detection and intrusion d etection are supported by other smart DVR/HV R models.
User Manual of DS -7200/73 00 /8100 Series DVR 95 Figure 5. 27 Set T rigger Camera of VCA Alarm The PTZ Linking function is only available for the VCA settings of IP ca meras. 4. Enter Record Schedule settings in terface (Menu> Record> Schedule>Record Schedu le), and then set VCA as the record type.
User Manual of DS -7200/73 00 /8100 Series DVR 96 5.6 Configuring Manu al Record Purpose: Follow the steps to set p arameters for the manual record . When u sing manual record, you need to manually cancel the record. The m anual recording is prior to the scheduled recording.
User Manual of DS -7200/73 00 /8100 Series DVR 97 5.7 Configuring Holi day Record Purpose: Y ou may want to h ave different p lan for recording o n holiday . Follow the steps to c onfigure the record schedule on holiday . S teps: 1. En ter the Record setting interface.
User Manual of DS -7200/73 00 /8100 Series DVR 98 5) Click Apply to save settings. 6) Click OK to exit the Edit interface. 4. En ter Record Schedule settings interface. Menu> Record> Schedule 1) Select Record. 2) Check the checkbox after Enable Schedule .
User Manual of DS -7200/73 00 /8100 Series DVR 99 5.8 Configuring Redund an t Record Purpose: Enabling redundant record ing, wh ich means saving the record files not only in the R/W (read/write) HDD b ut also in the redundant HDD, will eff ectively enhance the data safety and reliability .
User Manual of DS -7200/73 00 /8100 Series DVR 100 Figure 5. 35 Encoding Reco rd 2) Select Camera you want to configure. 3) Check the checkbox of the Redundant Record . The Redundant Record option is only available when the HDD mode is Gr oup. The redundant record is used when you want to save the record files in the redundant HDD.
User Manual of DS -7200/73 00 /8100 Series DVR 101 5.9 Configuring HDD Gr oup for Record Purpose: Y ou can group the HDDs and save the record files in certain HDD group. S teps: 1. En ter HDD setting interface . Menu>HDD Figure 5. 36 HDD -General 2.
User Manual of DS -7200/73 00 /8100 Series DVR 102 After having configured the HDD groups, you can co nfigure the Recordin g settings following th e p rocedure provided in Chapter 5.
User Manual of DS -7200/73 00 /8100 Series DVR 103 5.10 Files Pr otection Purpose: Y ou can lock the recorded files or set th e HDD property to Read -only to protect the record files from being overwritten. Protec t file by locking the reco rd files: S teps: 1.
User Manual of DS -7200/73 00 /8100 Series DVR 104 5. P rotect the record files. 1) Find the record f iles you want to pro tect, a nd then click th e icon which will tu rn to , indicating that the file is locked. The record files of which the recording is still not compl eted can’t be locked.
User Manual of DS -7200/73 00 /8100 Series DVR 105 Figure 5. 42 HDD Gen eral- Editing 3. S et the HDD to Read-only . 4. Cli ck OK to save settings and back to the upper level menu. Y ou can’t save any files in a Read -only HDD. I f you want to save files in the HDD, change th e property to R/W .
User Manual of DS -7200/73 00 /8100 Series DVR 106 Chapter 6 Playback.
User Manual of DS -7200/73 00 /8100 Series DVR 107 6.1 Playing Back Recor d Files 6.1.1 Playing Back by Channel Purpose: Play back the recorded video files of a specific channel in the live view mode.
User Manual of DS -7200/73 00 /8100 Series DVR 108 Figure 6. 2 Right- click Menu under Liv e View The Add IP Camera item is available for the HDVR only. Press PLA Y button on the IR remote control to play back rec ord files of the chann el under single-screen live view .
User Manual of DS -7200/73 00 /8100 Series DVR 109 Figure 6. 3 Playbac k Interface Check the checkboxes to select the channel(s), and then the video from the selected channels will be played back sy nchro nously. Up to 16 channels can be set for synchronous playback.
User Manual of DS -7200/73 00 /8100 Series DVR 1 10 time bar Exit V ideo type bar Normal playback : P layback progress bar: u se the mouse to click any point of the progress bar or drag the progress bar to locate special frames.
User Manual of DS -7200/73 00 /8100 Series DVR 111 Playback by alarm input search is supported by DS -7224/7232, DS -7300 and DS-8100 models only. The VCA type is supported by smart DVR/HDV R models only. Steps: 1. Enter th e play back interface.
User Manual of DS -7200/73 00 /8100 Series DVR 1 12 Figure 6. 7 Select Cha nnels for Synchronous Pla yback 6. Event playback interface. The toolbar in the bottom part of Playback interface can be used to control playing process.
User Manual of DS -7200/73 00 /8100 Series DVR 1 13 Figure 6. 9 Toolbar of Playback by Ev ent Table 6. 2 Deta iled Explana tion of Playback - by -event I nterface Button Operation Button Operation But.
User Manual of DS -7200/73 00 /8100 Series DVR 1 14 Figure 6. 10 Interface of No rmal Playback Click button to add default tag. Click b utton to add custom ized tag and input tag name. Max. 64 tags can be added to a single video file. 2. Tag management.
User Manual of DS -7200/73 00 /8100 Series DVR 1 15 2. Select to enter the Tag Playback interface. 3. Select the channels from the list, and specify the start time and end time for search. 4. Optionally, you can input the keyword of the tag name in the Keyword text field to narrow the search.
User Manual of DS -7200/73 00 /8100 Series DVR 1 16 Playback progress bar: use the mouse to click any point of the progress bar or drag the progress bar to locate special frames. About video type bar: represents normal rec ording (manual or schedule); represents event recording ; represents smart search recording.
User Manual of DS -7200/73 00 /8100 Series DVR 1 17 Figure 6. 15 Draw A rea for Smart Search (2) The VCA event o f face d etection is supported by DS -7200 HWI-E1(E2)/C/F series, and th e line crossing detection and intrusion detection are supported by the smart DVR/HDVR models with no /F suffix.
User Manual of DS -7200/73 00 /8100 Series DVR 1 18 Figure 6. 16 Smart Pla yback Interface Playback progress bar: use the mouse to click any point of the progress bar or drag the progress bar to locate special frames.
User Manual of DS -7200/73 00 /8100 Series DVR 1 19 Figure 6. 17 Log Search Int erface 2. Specify the start time and end time for search. 3. Select the major type of the log from the drop-down list. 4 major types are selectable: Alarm, Exception, Operation and Information.
User Manual of DS -7200/73 00 /8100 Series DVR 120 Figure 6. 19 Interface of Playback by Log 6.1.7 Playing Back Externa l Files Purpose: The record files stored in the external storage devices, e.g., USB flash drives, USB HDDs, can b e searched and played back.
User Manual of DS -7200/73 00 /8100 Series DVR 121 6.2 Auxiliary Functions o f Playback 6.2.1 Playing Ba ck Frame by Fra me Purpose: Play video files frame by frame, in order to check im a ge details of the video when abnormal events happen. Steps: Using a Mous e: Go to Playback interface.
User Manual of DS -7200/73 00 /8100 Series DVR 122 6.2.3 Reverse Play back of Multi -channel Purpose: You can play back record files of m ulti-ch annel reversely. Steps: 1. Enter t he Playbac k interface. Menu>Playback 2. Check checkbox to select the channel(s) and double-click to select a date on the calendar.
User Manual of DS -7200/73 00 /8100 Series DVR 123 2. Select the camera from the dropdown list. The face detection is supported by the analo g cameras 01~0 2 only . Figure 6. 23 Fac e Search Interface 3. Specify the start time and end time for search the captured pictures.
User Manual of DS -7200/73 00 /8100 Series DVR 124 Figure 6. 25 Export Files.
User Manual of DS -7200/73 00 /8100 Series DVR 125 Chapter 7 Backup.
User Manual of DS -7200/73 00 /8100 Series DVR 126 7.1 Backing up Record Fil es Before you st art: Please insert the backup device(s) into the device. 7.1.1 Quick Export Purpose: Ex port record files to backup device(s) quickly . Steps: 1. Enter Vid eo Export interfac e.
User Manual of DS -7200/73 00 /8100 Series DVR 127 Figure 7. 2 Quick Expo rt using USB1- 1 3. In th e Export interface, choose bac kup device and click Ex port button to start exporting. Here we use USB Flash Drive and please refer to the next section Norm al Backup for more backup devices supported by the device.
User Manual of DS -7200/73 00 /8100 Series DVR 128 writer) , SA T A writer or eSA T A H DD . The eSA T A writer is supp orted by DS -7300 and DS-8100 models only . Backup using USB flash drives, USB HDDs, USB w riter , SATA writer or eSATA H DD . Steps: 1.
User Manual of DS -7200/73 00 /8100 Series DVR 129 Figure 7. 5 Resul t of Normal Video Sear ch for Backup 4. Export the record files. Click Export button and start backup. If the inserted device is not recognized: • Click the Refresh button. • Reconnect d evice.
User Manual of DS -7200/73 00 /8100 Series DVR 130 Stay in the Exporting interface until all record f iles are exported with pop - up message box “Export finished ”. 5. Check backup result. Choose the record file in Export interface and click button to check it.
User Manual of DS -7200/73 00 /8100 Series DVR 131 The VCA event o f face d etection is supported by DS -7200 HWI-E1(E2)/C/F series, and the line crossing detection and intrusion detection are supported by the smart DVR/HDVR models with no /F suff ix.
User Manual of DS -7200/73 00 /8100 Series DVR 132 6. Select record files to export. You can use the following two ways to enter the Export interface. Select motion detection event (s) from the list and click Quick Export button to enter the Export interface, as shown in Figure 7.
User Manual of DS -7200/73 00 /8100 Series DVR 133 Figure 7. 11 Export by Event Using USB F lash Drive Stay in the Exporting interface until all record f iles are exported with pop - up message “Export finished ”. 8. Check backup result. Choose the record file in Export interfac e and click button to check it.
User Manual of DS -7200/73 00 /8100 Series DVR 134 The eSA T A writer is supp orted by DS-7300 and DS-8100 models only . Steps: 1. Enter Playback interface. Please refer to Chapter 6 . 2. During playback, use buttons and in the playback toolbar to start or stop clipping record file(s).
User Manual of DS -7200/73 00 /8100 Series DVR 135 Stay in the Exporting interface until all record f iles are exported with pop - up message “Export finished ”. Figure 7. 15 Export Finish ed 5. After the backup is complete, the exported record files will be display ed i n a list on the Export interface.
User Manual of DS -7200/73 00 /8100 Series DVR 136 7.2 Managing Backup De vices Management of USB flash drive , USB HDD and eS ATA HDD. The eSATA HDD is supported by DS-7300 and DS-8100 models only. Steps: 1. Enter th e Export interfac e of backup device.
User Manual of DS -7200/73 00 /8100 Series DVR 137 Click the button Erase , and you can erase the files from a re-writab le CD/DVD. If the inserted device is not recognized, you can perform the following steps: Click the button Refresh . Reconnect device.
User Manual of DS -7200/73 00 /8100 Series DVR 138 Chapter 8 Alarm Settings.
User Manual of DS -7200/73 00 /8100 Series DVR 139 8.1 Setting Motion Detecti on Steps: 1. Enter Motion Detection interface and choose a camera you want to set m otion detection. Menu> Camera> Motion Figure 8. 1 Motion De tection Setup Int erface 2.
User Manual of DS -7200/73 00 /8100 Series DVR 140 Figure 8. 3 Set Trigg er Camera of Motion D etection 4. Set up arming schedule of the channel. 1) Select Arming Schedule tab to set the channel’s arming schedule. 2) Choose one day of a week a nd up to eight time periods can b e set w ithin each day.
User Manual of DS -7200/73 00 /8100 Series DVR 141 The Trigger Alarm Output option is available for DS -722 4/7232, DS-7300, DS-8100 and HDVR models only .
User Manual of DS -7200/73 00 /8100 Series DVR 142 8.2 Setting Sensor Alarms This section is available for DS -7224/7232, DS-7300, DS-8100 and HDVR models only . Purpose: You can s et handling method of an external sensor alarm. Steps: 1. Enter Alarm Settings interface and select an alarm input.
User Manual of DS -7200/73 00 /8100 Series DVR 143 Time periods shall not be repeated or overlapped. 5. Select the Lin ka ge Action tab to set alarm response actions of the alarm input ( please refer to Chapter 8.6 ). Figure 8. 9 Set Arming Schedule of Alar m Input 6.
User Manual of DS -7200/73 00 /8100 Series DVR 144 Figure 8. 11 Copy Setti ngs of Alarm Input.
User Manual of DS -7200/73 00 /8100 Series DVR 145 8.3 Detecting V ideo Loss Purpose: Detect video loss of a channel and take alarm response a ction(s). Steps: 1. Enter Vid eo Loss interfac e of Camera Management. Menu> Camera> Video Loss Figure 8.
User Manual of DS -7200/73 00 /8100 Series DVR 146 8.4 Detecting V ideo T a mpering Purpose: Trigger alarm when the lens is covered and take alarm response action(s). Steps: 1. Enter Video Tampering interface of Camera Management. Menu> Camera> Video Tampering Detection Figure 8.
User Manual of DS -7200/73 00 /8100 Series DVR 147 8.5 Detecting VCA Alarm 8.5.1 Line Crossing and Intrusion Detection The line crossing detection and intrusion detection are supported b y th e Smart DVR/HDVR models with no /F suffix.
User Manual of DS -7200/73 00 /8100 Series DVR 148 left. And you can set the duration for the alarm respo nse actions, such as full screen monitoring, audible warning, etc.
User Manual of DS -7200/73 00 /8100 Series DVR 149 3) Select Linkage Action tab to set up alarm response actions of the alarm input (please refer to Chapter 8.7 Setting Alarm Response Actions ). 4) Click th e OK button to com plete the V CA alarm settings of the chann el.
User Manual of DS -7200/73 00 /8100 Series DVR 150 Figure 8. 21 Set Intrusion Detection 4) Set th e time threshold to 0-10 sec. When the duration of the object in the defined detection area is longer than the set time, the alarm will be triggered.
User Manual of DS -7200/73 00 /8100 Series DVR 151 8.5.2 Face Detecti on The face detection is supported by DS -72 00HWI-E1(2)/C/F models only . Purpose: The Steps: 1. Enter Face Detection interface of Camera Manageme nt and select a camera you want to detect.
User Manual of DS -7200/73 00 /8100 Series DVR 152 8.6 Handling Exc eptions Purpose: Exception settings refer to the handling method of various exceptions, e.g., • HDD Fu ll: The HDD is full. • HDD Error : Writing HDD error, unformatted HDD, etc. • Network Disconnected: Disconnected network cable.
User Manual of DS -7200/73 00 /8100 Series DVR 153 Figure 8. 24 Exception Settings Interf ace.
User Manual of DS -7200/73 00 /8100 Series DVR 154 8.7 Setting Alarm Response Actions Purpose: The alarm response actions will be activated when an exception occurs, including Ful l Screen Monitoring, Audible Warning, Notify Surveillance Center, an d Send Email.
User Manual of DS -7200/73 00 /8100 Series DVR 155 If “Manually Clear” is selected in the dropdown list o f Dwell Time, you can clear it only b y going to M enu> Manual> Alarm and clicking Clear All . Figure 8. 25 Ala rm Output Settings I nterface 2.
User Manual of DS -7200/73 00 /8100 Series DVR 156 8.8 T riggering or Clearing Alarm Output Manually This se ction is available for DS -7224/7232, DS-7300, DS-8100 and HDV R models only .
User Manual of DS -7200/73 00 /8100 Series DVR 157 Chapter 9 Network Setting s.
User Manual of DS -7200/73 00 /8100 Series DVR 158 9.1 Configuring General Settings Purpose: Network settings must be properly con figured before you operate device over network. S teps (for DS-7200, DS-7300 an d DS-8104/8108): 1. Enter th e Network Settings interface.
User Manual of DS -7200/73 00 /8100 Series DVR 159 If the DHCP server is available, you can click the check box of DHCP to automatically obtain an IP address and other network settings from that server. When th e DHCP is failed, the defa ult IP address (192.
User Manual of DS -7200/73 00 /8100 Series DVR 160 Load Balance Mode: B y u sing the same IP address, two NIC cards share the load o f the total bandwidth, which enables the system to provide two Gigabit network capacity .
User Manual of DS -7200/73 00 /8100 Series DVR 161 Configuring EZVIZ Cl oud P2P Purpose: EZVIZ Cloud P2P p rovides the mobile phone application and as well th e service platform page to access and manage your connected DVR, which enables you to get a convenient remotely access to the surveillance system.
User Manual of DS -7200/73 00 /8100 Series DVR 162 Configuring DDNS Pu rpose: If your d evice is set to u se PPPoE as its default network connection, y ou may set Dynamic DNS (DDNS) to be used for network access. Prior registration with your ISP is required before configuring the system to use DDNS.
User Manual of DS -7200/73 00 /8100 Series DVR 163 Figure 9. 10 DynDNS Set tings Interface • PeanutHull: Enter User Name and Password o btained from the PeanutHull website. Figure 9. 11 Peanut Hul l Settings Interfac e • NO -IP: Enter the account information in the corresponding f ields.
User Manual of DS -7200/73 00 /8100 Series DVR 164 Figure 9. 13 HiDDNS Sett ings Interface Register the device on the HiDDNS server. 1) Go to the HiDDNS website: www.hik-online.co m . Figure 9. 14 Login Interface 2) Click to register an account if you do not have o ne and use the account to log in.
User Manual of DS -7200/73 00 /8100 Series DVR 165 3) In the Device Management interface, click to register the device. Figure 9. 16 Register the Device 4) Input Device Serial No ., Device Doma in ( Device Na me ) and HTTP Port . And click OK to add the device.
User Manual of DS -7200/73 00 /8100 Series DVR 166 Figure 9. 17 Access Device via iVMS-4200 5. Cli ck the Apply button to save and exit the interface. 9.2.2 Configuring PP PoE Settings Purpose: Y our device also allows access by Point- to -Point Protocol over Ethernet (PPPoE).
User Manual of DS -7200/73 00 /8100 Series DVR 167 connection. Please refer to Chapter 12.1Viewing System Information for PPPoE status. 9.2.3 Configuring NTP Se rver Purpose: A Network T ime Pro tocol (NTP) Server can be co nfigured on your device to ensure the accuracy of system date/time.
User Manual of DS -7200/73 00 /8100 Series DVR 168 Figure 9. 21 SNMP Setti ngs Interface 3. Ch eck the SNMP checkbox to enable this feature. 4. Co nfigure the SNMP settings. Figure 9. 22 Configure SNMP Settings 5. Cli ck the Apply button to save and exit the interface .
User Manual of DS -7200/73 00 /8100 Series DVR 169 Figure 9. 23 UPnP ™ Settings Interface 3. Check checkbox to enable UPnP ™ . 4. Select the mapped type to Auto o r Manual. T ask1: Auto If you select Auto, the Port Mapping item s are read -only , and the external p orts are set by the router automatically .
User Manual of DS -7200/73 00 /8100 Series DVR 170 Figure 9. 25 External Po rt Settings Dialog Box 2) Click Apply to save the settings. 3) Y ou can click Refresh to get the latest status of the port mapping.
User Manual of DS -7200/73 00 /8100 Series DVR 171 Figure 9. 27 External Port Settin gs Dialog Bo x 5. Click OK to save the setting for the current port and return to the upper-level menu. 6. Click Apply button to save the settings. 7. Enter the virtual server setting page o f ro uter .
User Manual of DS -7200/73 00 /8100 Series DVR 172 3. Co nfigure the remote alarm host, serv er port, HTTP port, multicast, RTSP port or telnet. Alarm Host IP/Port : With a remote alarm h ost configured, the device will send the alarm event or exception message to the host when an alarm is triggered.
User Manual of DS -7200/73 00 /8100 Series DVR 173 Example: If you set th e port No. as 445 and the IP address o f the device is 1 92.0.0.64, you can access the device by inputting https://192.0.0.64:445 in the web browser. S teps: 1. Access the device via the web browser and enter the HTTPS settings interface.
User Manual of DS -7200/73 00 /8100 Series DVR 174 Figure 9. 33 Installed Certificate Property 4. Check the checkbox to enable the HTTPS function. The HTTPS Port should be set to the range of 1-65535.
User Manual of DS -7200/73 00 /8100 Series DVR 175 Figure 9. 35 Email Settings Interface 5. Co nfigure the following Email settings: Enable Server Authentication (optional): Check th e checkbox to enable the server authentication feature. User Name : The user account of sender’s Email for SMTP server authentication.
User Manual of DS -7200/73 00 /8100 Series DVR 176 6. Cli ck the Apply button to save the Em ail settings. 7. Yo u can click the Test button to test whether your Ema il settings work.
User Manual of DS -7200/73 00 /8100 Series DVR 177 9.3 Checking Network T r affic Purpose: Y ou can check t he network traffic to o btain real -time information of device such as linking status, MTU, sending/receiving rate, etc. S teps: 1. En ter the Network Traffic interface.
User Manual of DS -7200/73 00 /8100 Series DVR 178 9.4 Network Detection Purpose: Y ou can obtain network connecting status of device through the network detection function, including network delay , packet loss, etc. 9.4.1 T esting Netw ork Delay and P acket Loss S teps: 1.
User Manual of DS -7200/73 00 /8100 Series DVR 179 3. Select the backup device from the dropdown list of Device Name. Click the Refresh button if the connected local backup device cannot be displayed. W hen it fails to detect the backup device, please check whether it is compatible with the device .
User Manual of DS -7200/73 00 /8100 Series DVR 180 Figure 9. 43 Checking N etwork Status If the network is normal the corresponding message box pops out. If the message box pops out with oth er information instead of this one, you can click Network button to show the quick setting interface of the network parame ters.
User Manual of DS -7200/73 00 /8100 Series DVR 181 Figure 9. 45 Network Stat. Interface 3. View the bandwidth o f Rem ote Live View, bandwidth of Remote Playback, bandwidth of Net Total Idle information. 4. Click Refresh button to get the latest bandwidth statistics.
User Manual of DS -7200/73 00 /8100 Series DVR 182 Chapter 10 HDD Mana gement.
User Manual of DS -7200/73 00 /8100 Series DVR 183 10.1 Initializing HDDs Purpose: A newly installed hard disk drive (HDD) must be initialized before it can be used w ith your device. S teps: 1. En ter the HDD Informa tion interface. Menu > HDD>General Figure 10.
User Manual of DS -7200/73 00 /8100 Series DVR 184 Figure 10. 3 HDD Status Cha nges to Nor mal Initializing the HDD will erase all data on it..
User Manual of DS -7200/73 00 /8100 Series DVR 185 10.2 Managing Network HD D Purpose: You can add the allocated NAS or disk of I P SAN to device, and use it as network HDD. S teps: 1. Enter the HDD Inform ation in terface. Menu > HDD > General Figure 10.
User Manual of DS -7200/73 00 /8100 Series DVR 186 5. Co nfigure the NAS or IP SAN se ttin gs. • Add NAS disk: 1) Enter th e NetHDD IP address in t he text field. 2) Click Search to search the available NAS disks. 3) Select the NAS disk from the list shown below.
User Manual of DS -7200/73 00 /8100 Series DVR 187 Figure 10. 7 Add IP SAN Disk 6. After having successfull y added the NAS or IP SAN disk, return to the HDD Information menu. The added NetHDD will be displaye d in the list. If the added NetHDD is uninitialized, please select it and click the Init button for initialization.
User Manual of DS -7200/73 00 /8100 Series DVR 188 10.3 Managing HDD Gr oup 10. 3.1 Setting HDD Gr oups Purpose: Multiple HDDs can be managed in groups. Video from specified channels can be recorded ont o a particular HDD group through HDD settings. S teps: 1.
User Manual of DS -7200/73 00 /8100 Series DVR 189 Menu > HDD > General 6. S elect HDD from the list and click the icon to enter the Local HDD Settings interfac e. Figure 10. 11 Local HDD Settings Int erface 7. S elect the Group number for the current HDD.
User Manual of DS -7200/73 00 /8100 Series DVR 190 Figure 10. 13 Set HDD Property 3. S et the HDD property to R/W, Read-only or Redundancy. 4. Cli ck the OK button to save the settings and exit the interface. 5. In the HDD Informa tion menu, the HDD property will be displayed in the list.
User Manual of DS -7200/73 00 /8100 Series DVR 191 10.4 Configuring Quota Mode Purpose Each camera can be configured with allocated quota for the storage of recorded files. S teps 1. En ter the Storage Mode interfac e. Menu > HDD > Advanced 2. S et the Mode to Quota .
User Manual of DS -7200/73 00 /8100 Series DVR 192 10.5 Checking HDD S tatus Purpose: You may check the status of the installed HDDs on device so as to take imme diate check and maintenance in case of HDD failure. Checking HDD S tatus in HDD Information Interface S teps: 1.
User Manual of DS -7200/73 00 /8100 Series DVR 193 10.6 Checking S.M.A.R.T . Informati on Purpose: The S.M.A.R.T . ( Self-Monitoring, Analysis and Reporting T echnology ) is a monitoring system for HDD to detect a nd report on various indicators o f reliability in the hopes of anticipating failures.
User Manual of DS -7200/73 00 /8100 Series DVR 194 10.7 Detecting Bad Sector Purpose: The bad sectors of a HDD may cause the system to slow down when reading or w riting data. Y ou can detect the bad sectors of the HDD and thus to take immediate measures to repair it.
User Manual of DS -7200/73 00 /8100 Series DVR 195 10.8 Configuring HDD Err o r Alarms Purpose: Y ou can configure the HDD error alarms when the HDD status is Uninitiali zed or Abnormal . S teps: 1. En ter the Exception interface. Menu > Configuration > Exceptions 2.
User Manual of DS -7200/73 00 /8100 Series DVR 196 Chapter 11 Came ra Settings.
User Manual of DS -7200/73 00 /8100 Series DVR 197 11.1 Configuring OSD Settin gs Purpose: Y ou can configure the OSD (On-screen Display) settings for the camera , including date /time, camera name, etc. S teps: 1. Enter th e OSD Conf iguration interface.
User Manual of DS -7200/73 00 /8100 Series DVR 198 11.2 Configuring Privacy Mask Purpose: Y ou are allowed to configure the four-sided privacy mask zones that cannot be viewed by the operator . S teps: 1. Enter th e Privacy Mask Settings interface. Menu > Camera > Privacy Mask 2.
User Manual of DS -7200/73 00 /8100 Series DVR 199 11.3 Configuring V ideo Paramete rs S teps: 1. Enter th e Imag e Settings interface. Menu > Camera > Image 2. Select the camera to set image parameters. 3. Set the period of a day for configuring independent image parameters so as to satisfy different light conditions, e.
User Manual of DS -7200/73 00 /8100 Series DVR 200 11.4 Configuring V ideo Quality Diagn ostics Purpose: When th e video quality is d iagnosed ab normal (e.
User Manual of DS -7200/73 00 /8100 Series DVR 201 6. Configure the threshold of the three exception types: Blurred Image, A bnormal Brightn ess and Color Cast. The value can be set to 0~100. When th e actual value exceeds the configured threshold, the video quality diagnostics alarm will be triggered and linked with the response actions.
User Manual of DS -7200/73 00 /8100 Series DVR 202 Chapter 12 Device Manag ement and Maintenance.
User Manual of DS -7200/73 00 /8100 Series DVR 203 12.1 V iewing System Inform at ion S teps: 1. Enter th e Sy stem Information interface. Menu > Maintenance > System Info 2. You can click the Device In fo , Camera , Record , Alar m , Netw ork and HDD tabs to view the system information of the device.
User Manual of DS -7200/73 00 /8100 Series DVR 204 2. Set the log search conditions to refine your search, including the Start Tim e, End Time, Major Type and Minor Type. 3. Click the Search button to start search in g log files. 4. The matched log files will be displayed on the list shown below.
User Manual of DS -7200/73 00 /8100 Series DVR 205 6. If you want to export the log files, click the Export button to enter the Export menu. You can also export all the log files stored in the HDD. (1) Enter the Log Exp ort interface. Menu > Maintenance > Log Information>Log Export Figure 12.
User Manual of DS -7200/73 00 /8100 Series DVR 206 device can be imported to multiple device devices if they are to be configured with the same parameters. S teps: 1. Enter th e Import/Export Conf iguration File interface. Menu > Maintenance > Import/Export Figure 12.
User Manual of DS -7200/73 00 /8100 Series DVR 207 12.4 Upgrading System Purpose: The firmware on your device can be upgraded by local backup device or rem ote F TP server . 12. 4.1 Upgrading by Lo cal Backup Device S teps: 1. Conn ect your device with a local backup d evice where the upd ate firmware file is located.
User Manual of DS -7200/73 00 /8100 Series DVR 208 Figure 12. 9 FTP Upgrade Interface 3. Enter th e FTP Serve r Address in the text field. 4. Cl ick the Upgrade button to start upgrading. 5. After the upgrading is complete, reboot the device to activate the new firmware.
User Manual of DS -7200/73 00 /8100 Series DVR 209 12.5 Restoring Default Settings S teps: 1. En ter the Default interface. Menu > Maintenance > Default Figure 12. 10 Restore Defaults 2. S elect the restoring type from the following three options.
User Manual of DS -7200/73 00 /8100 Series DVR 210 Chapter 13 Others.
User Manual of DS -7200/73 00 /8100 Series DVR 211 13.1 Configuring General Set tings Purpose: You can configure the BNC output standard, VGA/HDMI output resolution, mouse pointer speed, etc. S teps: 1. En ter the General Settings interface. Menu > Configuration > General 2.
User Manual of DS -7200/73 00 /8100 Series DVR 212 13.2 Configuring RS-232 Serial Port The RS-232 serial port is provided by DS-7300 and DS-8100 models only . Purpose: The RS-232 port can be used in tw o ways: • P arameters Configuration: Connect a PC to the device through the PC serial port.
User Manual of DS -7200/73 00 /8100 Series DVR 213 13.3 Configuring DST Settings Steps: 1. En ter the General Settings interface. Menu >Configuration>General 2. Ch oose DST Settings tab. Figure 13. 3 DST Settings Interface You can check the checkbox before the Auto DST Adjustment item.
User Manual of DS -7200/73 00 /8100 Series DVR 214 13.4 Configuring Mor e Settings S teps: 1. En ter the General Settings interface. Menu > Configuration > General 2. Cli ck the More Settings tab to enter the More Settings interface. Figure 13. 4 More Setti ngs Interface 3.
User Manual of DS -7200/73 00 /8100 Series DVR 215 13.5 Managing User Accounts Purpose: There is a def ault account in the devi ce : Administrator . The Administrator user name is admin and the password i s set when y ou start the device f or the first time.
User Manual of DS -7200/73 00 /8100 Series DVR 216 User’s MA C Address . Password : S et the password for the user acco unt. STRONG PASSWO RD RECOMM ENDED – We highly r ecomme nd you cr eate a str.
User Manual of DS -7200/73 00 /8100 Series DVR 217 Figure 13. 8 User Permission Settings Interface b) Set the operating p ermi ssion of Local Configuration, Rem ote Configurati on and Cam era Configuration for the user. Local Config uration • Local Log Search: Searching and viewing logs and sy stem information of dev ice.
User Manual of DS -7200/73 00 /8100 Series DVR 218 capturing and alarm output of the select ed camera ( s). • Local Playback: L ocally playi ng back recorded fi les of the select ed camera ( s). • Remote Play back: Remotely playing back recorde d files of the sel ected cam era (s).
User Manual of DS -7200/73 00 /8100 Series DVR 219 Figure 13. 10 Edit User Interface 4. Edit the correspondi ng param eters. • Operator and Guest You can edi t the user infor mation, includi ng user nam e, password, perm ission level and MAC address.
User Manual of DS -7200/73 00 /8100 Series DVR 220 Chapter 14 Append ix.
.
User Manual of DS -7200/73 00 /8100 Series DVR 222 Glossary • Dual Stream: Dual stream is a technology used to record high resolution video locally w hile transmitting a lower resolution stream ove r the n etwork.
User Manual of DS -7200/73 00 /8100 Series DVR 223 T roubles hooting No image displayed on the monitor after the device is star ting up normally. Possible Reasons a) No VGA or HDMI connections. b) Conn ection cable is dam aged. c) In put mode of the monitor is inco rrect.
User Manual of DS -7200/73 00 /8100 Series DVR 224 4. Ch eck if the fault is solved by the step 1 to step 3. 1) If it is solved, finish the process. 2) If not, please contact the engineer from our company to do the further process.
User Manual of DS -7200/73 00 /8100 Series DVR 225 2) When the IPC is offline, please try the ping command on PC to check if the PC connects with the IPC. 3. V erify the network between IPC and HDVR is stable. 1) When the IPC is offline, connect PC and HDVR with the RS-232 cable.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Hikvision DS-7308HWI-SH c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Hikvision DS-7308HWI-SH - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Hikvision DS-7308HWI-SH, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Hikvision DS-7308HWI-SH va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Hikvision DS-7308HWI-SH, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Hikvision DS-7308HWI-SH.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Hikvision DS-7308HWI-SH. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Hikvision DS-7308HWI-SH ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
