Manuel d'utilisation / d'entretien du produit DS-2AF7268N-A du fabricant Hikvision
Aller à la page of 43
© Hikvision IR Spee d Dome U ser Manual UD.6L0 201D1359A01.
U ser Manual of IR Speed Dome © Hikvision 1 Thank you for purchasing our product. If there is any ques tion or reques t, p lease do not hesita te to cont act the dealer .
U ser Manual of IR Speed Dome © Hikvision 2 R egulatory Inf ormation FCC Inf ormation FCC compliance: This equipment has been tes ted and f ound to c omply with the limits for a digital device, purs uant to part 15 of the FCC Rules.
U ser Manual of IR Speed Dome © Hikvision 3 Saf ety Ins truction These instructio ns are in tended to ensure that user can use the p r oduct correctly to av oid d anger or property loss. The pr ecaution meas ure is divided in to W arnings and Cautions : W arnings: Neglecting an y of the warnings ma y cause serious injury or dea th.
U ser Manual of IR Speed Dome © Hikvision 4 otherwise (which is not a malfunction how ever), an d a ffec ting the end ur ance of sensor a t the same time.
U ser Manual of IR Speed Dome © Hikvision 5 T able of Con tent s Chapter 1 Ov erview .............................................................................................................................................. 1 1.1 Description ....
U ser Manual of IR Speed Dome © Hikvision 1 Chapter 1 O v er view 1.1 D e scription Integr ate d with the bu ilt -in pan/tilt unit , the high speed dome f eatur es h ighly sensitive response and r eliable perf ormance .
U ser Manual of IR Speed Dome © Hikvision 2 In manual tracking mode, when a targ et object goes directly beneath the dome, the dome wi ll automatic ally rota te 18 0 degre es in horiz ontal dir ection to maint ain continuity o f tracking .
U ser Manual of IR Speed Dome © Hikvision 3 recalle d with a command from a contr oller or automatically by a con figured function (alarm, park, time task, o r pow er-up). By de fault the focus and iris are in auto s tatus during th e pre set is being memorize d.
U ser Manual of IR Speed Dome © Hikvision 4 the dome to perf orm panorama scan within the z one. P assword The dome fe ature s pass word pr otection to pr event unaut ho riz ed changes to the dome settings.
U ser Manual of IR Speed Dome © Hikvision 5 Chapter 2 Get ting St art e d 2.1 Power - up Actio n A fter the power is applie d, the speed dome will perform a series of self -te st actions. It performs lens actions firstly , then the pann ing moveme nt and t he tilt ing movemen t a t la st.
U ser Manual of IR Speed Dome © Hikvision 6 k eyboards, DVRs, encoder , etc. In this and t he following chapter s, oper ation o f the speed dome by the IE brow ser of a DVR will be tak en as an e xample. P anning and ti lting: Click the direction but tons to c ontrol the mov ement of t he spee d dome.
U ser Manual of IR Speed Dome © Hikvision 7 Table 2-3 Sy stem-define d Prese ts of Manches ter Code Contr ol Pro tocol Prese t NO. Function Prese t NO.
U ser Manual of IR Speed Dome © Hikvision 8 Chapter 3 Menu O per a tion The OSD menu tr ee is shown in the follow ing figure. Note: The menu v aries depending on the model of speed dome.
U ser Manual of IR Speed Dome © Hikvision 9 Before you st art : Y ou c an oper ate the speed do me using the on -scr een display menu remotely by c onnecting t o a DVR or an encoder .
U ser Manual of IR Speed Dome © Hikvision 10 1. Mov e the cursor to the targ et item and click IRIS+ button and you can see the cursor (d iamond mark ) will change to be totally hollow . 2. C lick the up/down or lef t/ righ t buttons in the PTZ control panel to ch oose the value from the selectable va lue list.
U ser Manual of IR Speed Dome © Hikvision 11 MAIN MENUS > DOME SETT INGS > S YS INFO SETTINGS SYS INFO SETTINGS SOFT ADDRESS 1 SOFT ADDR ACTIVE OFF SOFT BAUD 2400 SOFT BAUD ACTIVE OFF BROADCAST.
U ser Manual of IR Speed Dome © Hikvision 12 (3) Click the up/down directi on buttons to increa se/decrea se the value. (4) Click IRIS+ butt on to confirm and e xit.
U ser Manual of IR Speed Dome © Hikvision 13 Configure the LED CONTR OL to set the LED con trol mode. The LED contr ol mode can be AUT O , F AR (far irra diation dis tance LEDs) ON , M/F (me dium and far irr adiation distance LED s) ON , MID (medium irr adiation dista nce LED s) ON , M/N (medi um and near irra diation distance LED s) ON and OFF .
U ser Manual of IR Speed Dome © Hikvision 14 CAMERA FOCUS AF ZOOM LIMIT 36 ZOOM SPEED HIGH SLOW SHUTTER ON IRCUT FILTER AUTO D/N LEVEL HIGH SHARPNESS 9 BACK EXIT CAMERA BLC/WDR OFF BLC LEVEL N/A AE M.
U ser Manual of IR Speed Dome © Hikvision 15 mode. SHUTTER: It is the shutter-priority mode. You need to adjust the shutter value manually. The iris and gain v alues will be adjus ted automa tically acc ording to the lighti ng conditions.
U ser Manual of IR Speed Dome © Hikvision 16 T ask 4: Y ou can turn INIT LENS on to t rigger a sp ont aneous lens initia tion for ensuring the normal opera tion. T ask 5: Set the sharpness level. T he sharpness function can increa se the g ain of the imag e an d sharpe n the edges in the p ictur e to enhance the pictur e details .
U ser Manual of IR Speed Dome © Hikvision 17 chroma suppr essing ef fects. Satur ation: The SA TURA TIO N val ue range s from 0 to 7. Contr ast: adj ust the image contr as t on CONTRAS T submenu between 0 and 7. Note: The selectable v alues of c ontras t and satur ation vary depending on the models of spee d dome.
U ser Manual of IR Speed Dome © Hikvision 18 surveillance ar ea from being live view ed and record ed. T he ma sk ed area s can mo ve with the panning /ti lting mov ements and automatic ally adjust the siz e as the lens z ooming in/out.
U ser Manual of IR Speed Dome © Hikvision 19 (4) T o modify the con figure d mask, click IRIS+ button to enter the SET BLANK menu and cl ick IRIS+ butto n ag ain to modify . Note: The tilt range for c onfiguring the privacy m asks is from 0° to 70 ° .
U ser Manual of IR Speed Dome © Hikvision 20 (1) Enter HALL in the T itle fi led of the softwar e, clic k OK , and you ’ ll see the cor responding codes 0 227-0 220-0231-0231 lis ted f or it. Figure 3- 11 Get the Codes of a Char acter (2) O n the SET TITLE menu, c all the p r esets st anding for each code in se quence t o e nter the codes.
U ser Manual of IR Speed Dome © Hikvision 21 3. Mov e the cursor to the targe t item and clic k IRIS+ and click u p/down direction b uttons to choose each display mode a s ON or OFF , and define each display tim e as 2 seco nd s, 5 seconds or 10 seconds.
U ser Manual of IR Speed Dome © Hikvision 22 Purpose: If you enable this function, the pan/tilt speeds change acc ording to the amount of z oom. When there is a large amount of z oom, the pan/tilt sp ee d will be slower for keepi ng the image f r om moving too f ast on the li ve view image.
U ser Manual of IR Speed Dome © Hikvision 23 Note: The new limit s tops will overwrite the e xist ed ones by def ault. 5. Y ou can clear the d e f ine d limit stops.
U ser Manual of IR Speed Dome © Hikvision 24 LABLE [PRESET 1 ] INS ZOOM+DELETE CONTENTS FOCUS+CHANGE CONTENTS FOCUS-CHANGE MARKER ROCKER CHOOSE CONTENTS OPEN: SURE CLOSE: BACK Figure 3- 15 Edit the Pre set Label(1) Steps: (1) Move the cur sor to EDIT LABL E and click IRIS+ to en ter the edit mode.
U ser Manual of IR Speed Dome © Hikvision 25 through a w eb brow ser , and cli ck the arr ow to cal l a user-defi ned pre set. 3.4.3 Configuring P atr ols Purpose: A patr ol is a memoriz ed series of pre set function. It can be set an d p r eviewed on the patrol settings interf ace.
U ser Manual of IR Speed Dome © Hikvision 26 NUM PRESET DWELL SPEED 1 0 6 30 2 0 6 30 3 0 6 30 4 0 6 30 5 0 6 30 6 0 6 30 7 0 6 30 DONE: OPEN QUIT:CLOSE Figure 3- 18 Edit the Pa trol (2) Click up/ down dir ection butt ons to position the pr eset to b e e dite d .
U ser Manual of IR Speed Dome © Hikvision 27 3.4.4 Configuring P att erns Purpose: A pa ttern is a memoriz ed, repea tab le series of panning , ti lting, zooming and prese t movemen ts that can be recalle d by a command or automatic ally p erf ormed by a configu red function (alarm, park, time task, and pow er-up) .
U ser Manual of IR Speed Dome © Hikvision 28 (2) Click the PT Z con trol buttons and di rection butt ons t o pan, tilt, or zoom in/out the speed dome to dra w a movem ent pa th . The speed dome can automatic ally memoriz e the path you opera ted as a patt ern.
U ser Manual of IR Speed Dome © Hikvision 29 (3) Click IRIS+ ag ain to c onfirm and ex it edit mode of this c olumn. Note: Y ou can c onfigure up to 8 tasks. TIME TASK TASK NUM 1 TASK STATE ON TASK ACTION NONE TASK TIME TASK PREVIEW TASK CLEAR BACK EXIT Figure 3- 21 T ime T ask Con figuration Menu 3.
U ser Manual of IR Speed Dome © Hikvision 30 T ask 2: Previ ew t he t ask. Move the cursor to T A SK PREVIEW and click IRIS+ to view t he time, action and st at us of t he schedule d task.
U ser Manual of IR Speed Dome © Hikvision 31 choose the zone n umber to be configur ed. Note: Y ou can configure up to 8 zones. 3. E dit the label of the z one. Please r ef er to Step 3. E dit the label of the prese t in Section 3.4. 2. 4. Con figu r e the zone are a.
U ser Manual of IR Speed Dome © Hikvision 32 temper ature, the lowes t temperat ure, the occurrences of video loss, low voltage, dome reboot, panning loss, tilting loss and communicat ion loss . Note: Panning loss and tilting loss ref er to the failure s of panning and ti lting, for diagn osing the el ectric motor o f the speed dome.
U ser Manual of IR Speed Dome © Hikvision 33 (3) Click IRIS+ ag ain to c onfirm and exit e dit mode of this column. Note: Y ou can configure up to 7 alarms. 3. Con figu r e the alarm input. Steps: (1) Move the cur sor to AL ARM INPUT a nd click the IRIS+ to en ter edit mode.
U ser Manual of IR Speed Dome © Hikvision 34 Notes : If the spee d dome is moving when a linkag e action is triggere d, it will stop at the current position and re sume f r om this position aft er the linkag e action f inishe s. The speed dome can be configured to re sume the PTZ positions, focus and iris value.
U ser Manual of IR Speed Dome © Hikvision 35 Chinese or in English. 3.6.2 Configuring Dome Authentic ation Purpose: Y ou can chang e and enable/disable t he pa sswor d to set t he dome authen tication t o pr event unauthorize d changes to t he dome set tin gs.
U ser Manual of IR Speed Dome © Hikvision 36 P arame ters Def ault V alue Dome addr ess 0 Baudra te 2400bps 120Ω matchi ng resis tance O ff Soft addr ess O ff Initial Positi on Zer o angle Soft Baudra te O ff Focus Semi-auto Zoom limit Max.
© Hikvision.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Hikvision DS-2AF7268N-A c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Hikvision DS-2AF7268N-A - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Hikvision DS-2AF7268N-A, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Hikvision DS-2AF7268N-A va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Hikvision DS-2AF7268N-A, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Hikvision DS-2AF7268N-A.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Hikvision DS-2AF7268N-A. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Hikvision DS-2AF7268N-A ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
