Manuel d'utilisation / d'entretien du produit LT0B-15A1 du fabricant HANNspree
Aller à la page of 72
NTSCTVMTWEN1203 MAC-001 143 User's Manual 15" Liquid Cr ystal Display T ele vision L T0B-15A1 2F , No.362, Ruei-Guang Rd., Neihu District, T aipei City 1 14, T aiwan, R.
Table of Contents 1 1. Warranty and Service .................................................... 3 2. Preface .................................................................... ..... 4 3. Description of Warning Symbols ................. ............
Table of Contents 2 SRS ..................... .............................................. 3 7 Mute ................................................. .................. 3 8 Video Setting ........................................................... 3 9 Hue .
3 The instructions on this manual are for the model(s) listed on the front cover . Before you start reading, check your product number by looking at the rear of your TV .
4 This manual is designed to assist use rs in setting up and using t he LCD TV . Information in this document has been care fully checked for accuracy; however , no guarantee is given to the correctness of the content s. The informatio n in this document is sub ject to change without notice.
5 Electric Power Notice Electric power may cause personal inju ry and mechanical damage if it is misused. Although safety has been tak en into conside ration during the design and production of this product, electric shock or fire can result when the product is misused.
6 Power Supply Safety Notes 1. T o avoid electric shocks, do not use an extended p ower cord or an outlet that does not match this pr oduct's plug or leaves the plug exposed. 2. This product has a 3-pin gro unded plug. The th ird pin connects to ground; do not r emove it.
7 Before Y ou Proceed 1. Read the Safety Notices and the User ’s Manual carefully before turning the pro duct on. 2. Keep your User ’s Manual in a safe place for future refere nce. Keep the box and packaging in case th e product needs to be shipped in the future.
8 Optimal V iewing Dist ance 160 cm.
9 Import ant Safety Inst ructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near wa ter . 6. Clean only with a dr y cloth. 7. Do not block any ven t ilation openings.
10 10. Protect the power cord from being walked on or pinched particularly at th e plug, conve- nience receptacles, and the point where they exit from the app aratus. 1 1. Use only with a cart, stand, tripod, bracket, or table specified by the manufa cturer , or sold with the apparatus.
11 Personal Safety T o avoid overloading t he power supply , do not plug too many electrical devices into an outlet or extension cable. Dangerous high-volt age electric power compo- nents are lo cated inside the TV . T o avoid electric shock, do not disassemble the casing.
12 Inst allation T o avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vent s. Install the outdoor antenna far fr om power trans- mission lines to av oid possible danger .
13 Operation Maintenanc e This product is designed for power sources as labeled on the casing. Avoid using any other power accessories to avoid electric sho ck or other damage. The plug can be inserted into an outlet in only one direction. Notify a qualified service techni- cian if you cannot plug it in correctly .
14 FCC Compliance S t atement 1 This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may n ot cause harm- ful interference, and ( 2) this devi ce must accept any interference received, including inter ference that may cause undesired operation.
15 DOC Compliance Notice 1 This digital app aratus does not exc eed the Class B limit s for radio noise emissions from digital app aratus as set out in the Rad io Interference Regulations of the Canadian Dep artment of Communications.This device complies with Canada ICES-003 Class B.
16 Thank you for purchasing this 15-inch Liquid Crystal Display TV. Y our LCD TV is designed to be safe, versatile, and easy to use. The fun design makes it a fun addition to any room.
17 Make sure the following componen ts are included in the box. Cont act your vendor immediately if anything is missing or damaged . TV User ’ s Manual Quick St art Guide W arranty and Service Manua.
18 F r ont View Description Function 1 Power T urns the TV on an d off. 2 Select channel Changes channels.Press CH > to increase the channel number .Press CH< to decrease the chann el number . In PC or A Vmode,press either button to return to TV mod e.
19 Input and Output P or ts Description Function 1 DC IN Connects to the inclu ded power adapter . 2 VGA Connects to a PC. 3 LINE IN Connects to a PC's DVI port . 4 LINE OUT Connects to external stereo speakers . 5 AV 2 Use the included 4 -IN-1 Audio/ Vi deo cable to connect exter - nal device s, such as a VCR, VC D, or DVD player .
20 Connecting to an Antenna or Cable TV 1 Connect one end of the UHF or CA TV cable to ANT Jack (V HF/UHF IN Jack) on th e back of the TV . 2 Connect the other en d of the VHF/ UHF (Antenna) or CA TV cable to the antenna socket or CA TV cable .
21 Connecting to A V Devices Connect external devices such as a VCR, VCD or DVD player , or video game to the TV using the 4-IN-1 cable. Connecting to a V CR/VCD/DVD Player The illustration presented here shows how to connect the TV to a VCR, VCD or DVD player .
22 Connecting to a Video Camera The instructions presented he re are a gene ral guide to connecting the TV to a camcorder or other type of digit al camera. Actual connections may vary according to the mak e an d m od el of the devic e. Refer to the user ’s manual included with the camcorder or camera for more detailed instructions .
23 Connecting to a Game Device The instructions presented here ar e a general gu ide to connecting the TV to a game device using the RCA Jacks provided (some game devices may require a unique adapter that is not pr ovided). Actual co nn ections may vary according to the mak e an d m od el of the gam e de vice .
24 Connecting Exter nal Speak er s or Headphones External speakers or head phones may be used to listen t o the TV rather than using the built- in speakers. Connect external speakers or headphones to the speaker line ou t port as illustrated. Notes • E xternal speakers or headphones are not included with the product.
25 Connecting to a PC Y ou can co nnect the TV to a PC and use it as an external monito r . Connect the TV’ s VGA po rt to the PC’ s VGA por t. Connect the TV’ s line in port to the PC’s line ou t port to listen to the PC’s audio output on the TV’ s speakers.
26 Connecting the P ow er Adapter 1 Connect the power cord to the power adapter as illustrated. 2 Plug the power adapter connector in to the DC-IN input jack on the rear panel of the TV . 3 Insert the three-pronged plug at the other end of the power cord into a powe r outlet.
27 Using the Remote Co ntr ol For best results, use the remote contr ol with in a distance of 5 meters from the front of the TV’ s signal sensor . Do not exceed an angle of 30 degrees when pointing at the signal sensor . Refer to the following illustration.
28 T ur ning the TV On and Of f 1 Press the POWER button on the remote control (or control panel). The power LED on the front of the TV chan ges from red to green, indicating that the power has been turned on. 2 Press the POWE R button again; in A V mode, the power LED changes from green to red , indi - cating that the TV is in off mo de.
29 Switching Source Signals Press SOURCE to select the incoming so urce signal. The current source setting (TV/CA TV , A V1, A V2 or PC) appears on the upper lef t corner of the screen. Note The TV supports S-V ideo inpu t in addition to normal vid eo and audio signals.
30 The On-Screen Display (OSD) menu system provides a quick and simple method to adjust your TV’s settings. This chapter describ es how to change each of the available settings. The OSD can be used with either th e remote con trol or the control pan el .
31 Brightness 1 Press MENU to enter the OSD menus. 2 Press t h e CH UP button or CH DOWN b ut to n to select Brightness & Contrast. 3 Press MENU to enter the Bright - ness & Contrast menu. 4 Press t h e CH UP b ut to n to increase the brightness.
32 Contrast 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN bu tt o n to select Brightness & Contrast. 3 Press MENU to enter the Bright - ness & Contrast me nu. 4 Press MENU to select Contrast. 5 Press t he CH UP b ut to n to increase the contrast.
33 Audio Setting Press the MENU button to enter the OSD menus. 1 Press t h e CH UP button o r CH DOWN b ut to n to select Audio Setting. 2 Press MENU to ente r the Audio Setting menu.
34 Tr e b l e 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN button to s e le c t Au d i o Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press t he CH UP b ut to n to increase the treble. Press t he CH DOWN but - t on to decrease the treble.
35 Bass 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN button to s e le c t Au d i o Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press MENU to select Bass. 5 Press t he CH UP b ut to n to increase the bass. Press t he CH DOWN bu t - t on to decrease the bass.
36 Balance 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN button to s e le c t Au d i o Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press MENU to select Balance. 5 Press t he CH UP b ut t on to change the balance to t he right speaker .
37 SRS This option enables the 3D Surround Sound feature . 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN button to s e le c t Au d i o Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press MENU to select SRS. 5 Press t he CH DOWN button to t u r n the SRS on.
38 Mute 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN button to s e le c t Au d i o Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press MENU to select Mute. 5 Press t he CH DOWN button to t u r n the mute on. Press t he CH UP but - t on to turn the mute off.
39 Video Setting Press the MENU button to enter the OSD menus. 1 Press t h e CH UP button o r CH DOWN b u t to n to select Video Setting. 2 Press MENU to ente r the Video Settin g menu.
40 Hue 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN button to se l e c t Vi d e o Setting. 3 Press MENU to enter the Video Setting menu . 4 Press t he CH DOWN button to increase the red hue. The image becomes more red. Press t he CH UP button t o in c r e as e t h e green hue.
41 Saturation 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN button to se l e c t Vi d e o Setting. 3 Press MENU to enter the Video Setting menu . 4 Press MENU to select Saturation. 5 Press t he CH UP b ut to n to increase the saturation.
42 Sharpness 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN button to se l e c t Vi d e o Setting. 3 Press MENU to enter the Video Setting menu . 4 Press MENU to select Sharpness. 5 Press t he CH UP b ut to n to increase the sharpness.
43 Color T emperature 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN button to se l e c t Vi d e o Setting. 3 Press MENU to enter the Video Setting menu . 4 Press MENU to select Color T emp. The following choices are available.
44 TV Setting Press the MENU button to enter OSD menus. 1 Press t h e CH UP button o r CH DOWN b u t to n to select TV Setting. 2 Press MENU to ente r the TV Setting menu.
45 TV/CA TV 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN button to s e le c t TV Se t t i n g . 3 Press MENU to enter the TV Set - ting menu. 4 Select one of the following choices. Receiving Air TV Press the CH UP button or CH DOWN button to select AIR TV when using an antenna to receive TV .
46 MTS 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN button to s e le c t TV Se t t i n g . 3 Press MENU to enter the TV Set - ting menu.
47 DUAL Press the CH UP button or CH DOWN button to select Dual, which enables broadcast of the main signal on one speaker , and the alternate audio signal on the other sp eaker . 5 Press MENU to select Ret urn. 6 Press t he CH DOWN button to e x i t the TV Setting menu.
48 Auto Program 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN button to s e l e c t T V S e t t i n g . 3 Press MENU to enter the TV Set - ting menu. 4 Press MENU to select Auto Pr o - gram. 5 Press t he CH DOWN button t o s e l e c t Ye s .
49 Manual Program This function allows you to search preset channels and era se ch an n els. 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN button to s e le c t TV Se t t i n g . 3 Press MENU to enter the TV Set- ting menu.
50 Channel Add/Erase After you have fou nd a channel using Man ual Program, follo w the fol lowing instruction to add or erase the chann el . 1 Press MENU to select Add/Erase. 2 Select one of the following options. Add Channel Press the CH DOWN button to select Add.
51 PC Setting Press the MENU button to enter the OSD menus. 1 Connect product to a PC. 2 Press SOURCE to select PC. 3 Press the CH UP or CH DOWN button to se lect PC. 4 Press MENU to ente r the PC menu. CH MENU V V PC PC Setting Return Select Menu OK H.
52 Horizontal Position 1 Press MENU to enter the OSD menus. 2 Press t h e CH UP button or CH DOWN button to s e l e c t P C S e t t i n g . 3 Press MENU to enter the PC Set - ting menu. 4 Press t h e CH UP button to m o v e t h e display to the r ight.
53 V ertical Position 1 Press MENU to enter the OSD menus. 2 Press t h e CH UP button or CH DOWN button to s e l e c t P C S e t t i n g . 3 Press MENU to enter the PC Set - ting menu. 4 Press MENU to select V .Position. 5 Press t h e CH UP button to m o v e t h e display up.
54 Phase 1 Press MENU to enter the OSD menus. 2 Press t h e CH UP button or CH DOWN button to s e l e c t P C S e t t i n g . 3 Press MENU to enter the PC Set - ting menu. 4 Press MENU to select Phase. 5 Press t h e CH UP b ut to n to increase the phase.
55 Clock 1 Press MENU to enter the OSD menus. 2 Press t h e CH UP button or CH DOWN button to s e l e c t P C S e t t i n g . 3 Press MENU to enter the PC Set - ting menu. 4 Press MENU to select Cloc k. 5 Press t h e CH UP b ut to n to increase the clock.
56 Color T emperature 1 Press MENU to enter the OSD menus. 2 Press t h e CH UP button or CH DOWN button to s e l e c t P C S e t t i n g . 3 Press MENU to enter the PC Set - ting menu. 4 Press MENU to select the More option. 5 Press t h e CH UP b ut to n to enter the Color T emp menu.
57 User The User option enables users to make their own color settings. Press the CH UP butt on to select User . The user menu appears. – Press MENU to select User R, User G , or User B. – Press the CH UP button or the CH DOWN button to increa se or decrease the selected color tem - perature.
58 Miscellaneous Setting Press the MENU button to enter the OSD menus. 1 Press t h e CH UP button o r CH DOWN b u tt on to select Miscellaneous. 2 Press MENU to enter the Mis- cellaneous menu.
59 Language 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN button to s e le c t Miscellaneous. 3 Press MENU to enter the Miscella - neous menu. 4 Press t he CH UP button or CH DOWN button to select Chinese or English. 5 Press MENU to select Ret urn.
60 Sleeper The Sleeper turns the TV off automatically af ter a set period of time . 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN button to s e le c t Miscellaneous. 3 Press MENU to enter the Miscella- neous menu. 4 Press MENU to select Sleeper .
61 OSD Display When set to Off, the OSD disp lay (source data on top lef t corner of the TV screen) tu rns off after approxim ately 5 seconds. When se t to On, the OSD does not turn off automatically . 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN button to s e le c t Miscellaneous.
62 Time Setting This setting allows you to set the TV clock . 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN button to s e le c t Miscellaneous. 3 Press MENU to enter the Miscella- neous menu. 4 Press MENU t o s e l e c t Tim e S e t t i n g .
63 OSD Background This setting allows you to make the OSD background tra nsparent or opaque . 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button o r CH DOWN button to s e le c t Miscellaneous. 3 Press MENU to enter the Miscella- neous menu.
64 Reset The Reset function returns all of your TV’s user settings to their factory defaults. W arning: The reset fun ction will erase all of your custom and favorite channel settings, and will reset all displa y settings (such as contrast, bright- ness, etc.
65 By default, OFF is already selected (highlighted in ye llow). The TV imme- diately resets when ON is selected and you see the messa g e on the screen. 8 Press MENU to select Ret urn. 9 Press t he CH DOWN button to e x i t the More Option menu. Reset .
66 T urn the power off b efore you begin cleaning the TV. For best results, use a clean lens cloth to remove dust and fingerprint s from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid dam- aging the finish.
67 Situation Solution No picture and sound. • Connect the power cord properly . • Press the POWER button on the control panel or remote control. • Press the SOURCE button to cycle through connected video sources. •P r e s s CH UP or CH DOWN to switch to other TV stations.
68 No sound but have image. • Make sure the source device is functioning properly . • Set the volume to a higher level. • Make sure the audio cable is connected securely . • T urn the mute off. Screen image turns over . • Make sure the video signal cable is con- nected properly .
69 L T0B-15A1 LCD Panel Size 15-inch TFT Aspect Ratio 4:3 Best Resolution 1024 (horizontal) x 768 (vertical) Maximum Display Area 304.1 mm (H) x 228.1 mm (W) TV System NTSC Video System VGA input (15 .
70 Aspect Ratio The ratio of width to height of a film, image or displ ay scree n. Broadcast TV Broadcasting video signals using high-frequency ele ctromagnetic waves to distribute television ch annels to viewers (standard TV broadcast). CA TV Community Antenna T elevision, the original name for cable TV .
is a trademark of SRS Labs, Inc. SRS technology is incorpo- rated under license from SRS Labs, Inc..
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté HANNspree LT0B-15A1 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du HANNspree LT0B-15A1 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation HANNspree LT0B-15A1, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le HANNspree LT0B-15A1 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le HANNspree LT0B-15A1, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du HANNspree LT0B-15A1.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le HANNspree LT0B-15A1. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei HANNspree LT0B-15A1 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
