Manuel d'utilisation / d'entretien du produit ST28FMMR du fabricant Hanns.G
Aller à la page of 51
S_ST28 F _UM_US_V0 1 _H 28” Liq uid Cr yst al Dis pla y T ele vis ion Tél évi seu r à Éc ran à Cri sta ux Liq uid es TV de Pan tal la de Cri sta l L íqu ido 1506-0CDL000.
Table of Contents 1 Regulatory Information ............................................. ................... 3 Description of Warning Sy mbols ....................... ........... .............. .. 4 Safety Notices .............. ........... ..........
Table of Contents 2 2.3.6 Editing Channel Table or Favorite Channel .............. 2 7 3. Adjusting On-Screen Display (OSD) Settings .......................... 2 8 3.1 OSD Setting Menus ............................ ............................. 2 9 3.
3 English R e gula tor y Infor ma tion FCC Compliance Sta tement 1 This device complies with part 15 of the FCC Rules. Operati on is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
4 English Description of W ar ning Symbols W ARNING: Keep out of reach of young children. Please do not allow young children to use this device unattended. Do not lean on or tip or lean objects against the device, as it may fall and cause physical injury .
5 English Saf ety Notices Inst allation Safety Notes Location Avoid allowing the TV to get prolong ed exposure to sunlight or other strong sources of heat. Leave sufficient distance between the TV and the wall to provide enough space for the emission of heat.
6 English Impor tant Safety Instr uctions 1. 2. 3. 4. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
7 English 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel.
8 English Personal safety Inst allation 1. T o avoi d overloading the power s upply , never plug t oo many electr ical devices into an outl et, power strip, or exten sion cable. 2. Dangerous high-voltage electric power component s are located inside the TV .
9 English Preface Thank you for purchasing a Hannspree Liquid Crystal Display T elevision (LCD TV). Y our new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology . Please carefully read this manual in its entirety before setting up, using or operating your TV .
10 English Recycling Infor mation We care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life.
11 English T rademark Notice Hannspree products incorporate High-Definition Multimedia Interface (HDMI™) technology . HDMI, the HDMI logo and High-Definition Multimedi a Interface are trademarks or registered trademarks of HDMI Licensing LLC. License Notice and T rademark Acknowledgment Manufactured under license from Dolby Laboratories.
12 English 1 Getting Star ted 1.1 P ackage Conte n ts Make sure the following co mponents are included in the box. Please contact Hannspree Customer Service immediate ly if anything is missing or damaged.
13 English 1.2 Introducing the TV Y ou can watch NTSC /A TSC broadcast, ca ble, or digital television channels, and easily connect a VCR, STB or DVD player to the standard CVBS, S-Video, component, and HDMI inpu t ports (location of these ports depends on model).
14 English 1.3 Control Panel Description Button Function Power Power button. Press to turn the TV on or off. Input source INPUT Press to open the input source list or mark an item on the OSD menu. Menu MENU Press to turn the on-screen display (OSD) on / off.
15 English 1.4 Input and Output Jac ks Description Connector Function Power connector Connect to the included pow er cord. HDMI 1 i nput Connect to an external device, such as a DVD pl ayer , Set-T op-Box, o r a PC’s DVI/ HDMI port. HDMI 2 i nput Connect to an external device, such as a DVD player , a Set-T op-Box, or a PC’s DVI/ HDMI port.
16 English 1.5 R emote Control Description Icon Function Power Press to turn the TV on or off. Input source INPUT Press to open the input source list. Keypad Use to select a channel directly . Press 0-9 to enter the program numbers (press 1 and 0 for channel 10).
17 English Sleep timer Press repeatedly to set the sleep time (Sleep off, 15, 30, 45, 60, 90, or 120 minutes). A Sleep Info appears on the midd le of the screen to show the remaining time. Cancel the timer by pressing the button to sleep off mode. Mute Press to eliminate audi o.
18 English Note: • For best results, use the remote control within a proper distance from the front of the TV . Do not exceed an angle of 30 degre es when pointing at TV. • The operational distance may be shortened when the sign al sensor is directly exposed to strong light.
19 English 1.6 Inser ting the Remote Control Batteries 1 Open the battery compartment cover at the back of the remote con trol (A). 2 Insert the batteries paying attention to the polarity markings inside the battery compartment (B). 3 Close the battery compartment cover (C).
20 English 2 Setting up y our TV 2.1 Basic Connections 2.1.1 Po wer Connection 1 Connect the p ower cord to the AC IN in put jack on t he rear of the TV .
21 English 2.2 Connecting Exter nal De vices Connect external devices such as VCRs, Set-T op-Box, DVD players, video game consoles, earphones, or a PC to the TV usin g the appropriate ports on the rear of the TV . 2.2.1 Connecting Exter nal Ear p hones Note: • External speakers or he adphones are not included with th e TV .
22 English 2.2.2 Connecting to A V Devices or or or HDMI 1 HDMI 2 A B C AUDIO Y Pb RL P r S-VIDEO RL VIDEO P r L R HDMI Y P b S-Video R L VIDEO AUDIO Audio Cable (Optional) Vide o Cable (Optional) Aud.
23 English 2.2.3 Connecting a VCR/ STB/ D VD Player Using Component Vide o Connect the TV to a VCR/ STB/ DVD player using the compone nt video inputs. 2.2.4 Connecting a VCR/ STB/ D VD Player Using Composite Video Connect the TV to a VCR/ STB/ DVD player using the composite video input.
24 English 2.2.5 Connecting a PC using VGA Connect the TV to your PC to use it as the monitor using the VGA port as shown. 1 Connect the VGA port of the TV to the VGA outp ut of the PC. 2 Connect the PC LINE IN port of your TV to the line out port of the PC to listen to audio from the PC.
25 English 2.2.7 Connecting HDMI HDMI (High Definition Multi media Interface) assures that the best video signal is always sent from source to the TV . Refer to the following illustration to connect an HDMI device to the TV . 2.2.8 C onnecting USB Connect the USB flash drive to the TV us ing the USB port as shown.
26 English 2.3 Using the TV 2.3.1 T ur ning the TV On a nd Of f 1 Press on the control panel or remote con trol. The power LED indicator on the TV chan ges from re d to green, indicating that the TV is on. 2 Press again. The p ower LED changes from green to red, indi cating that the TV i s of f .
27 English 3 Press to eliminate sounds, and press again or press the volume buttons to re store the original volume. 2.3.6 Editing Channel Table or F avorite Channel 1 Press MENU on the control panel or remote control, then select to enter the Channel menu.
28 English 3 Adjusting On-Scr een Display (OSD) Settings The On-Screen Disp lay (OSD) menu system provides a qui ck and simple method to adjust the TV settings. The OSD menu can be accessed through the butto ns either on the control panel or the remote control.
29 English 3.1 OSD Setting Menus Follow the instructions indicated on the bottom of the OSD Function Menu. Press / on the control panel or / arrow keys on the remote control to scroll through the menus. press INPUT/ VOL+ on the control panel or OK key on the remote control to select an item and then press MENU/ VOL- key to exit the OSD menu.
30 English 3.3 Adjusting Audio Settings 1 Press MENU to enter the OSD Main Menu screen. 2 Press / on the remote control or CH S / CH T on the control panel to select Audio men u. 3 Press / OK on the remo te control or INPUT/ VOL+ on the control p anel to enter the Audio menu.
31 English 3.4 Adjusting Channel Settings 1 Press MENU to enter the OSD Main Menu screen. 2 Press / on the remote control or CH S / CH T on the co ntrol panel to select Channel menu . 3 Press / OK on the remo te control or INPUT/ VOL+ on the control p a nel to enter the Channe l menu.
32 English 3.5 Adjusting V -CHIP Settings 1 Press MENU to enter the OSD Main Menu screen. 2 Press / on the remote control or CH S / CH T on the co ntrol panel to select V -CHIP menu. 3 Press / OK on the remo te control or INPUT/ VOL+ on the control p anel to enter the V -CHIP menu .
33 English 3.6 Adjusting Setup Settings 1 Press MENU to en ter the OSD Main Menu screen. 2 Press / on the remote control or CH S / CH T on the control panel to select Setup m enu. 3 Press / OK on the remote control or INPUT/ VOL+ on the control p anel to enter the Se tup menu.
34 English 4 T r oubleshooting Situation Solution No picture and sound. • Connect the power cord pro perly . • Check if the power LED is on or not. • Press on the control panel or remote control. •p r e s s INPUT to cycle through connected video sources.
35 English 5 Specifica tions LCD Panel Size 28 inch TFT Screen Format 16:10 Panel Resolution 1920 (H) x 1200 (V) T V S y s t e m AT V: N T S C D T V : AT S C Video System HDMI Input x 2 YPbPr Input x .
36 English PC Mode Support T iming Video Mode Support Timing Mode Resolution (active dot) Horizontal Frequency (KHz) V ertical Frequency (Hz) Nominal Pixel Clock (MHz) VGA DVI to HDMI VGA 640x480@60Hz 31. 469 59.941 25.175 V V SVGA 800x600@60Hz 37. 879 60.
37 English 6 Ap pendix: R emote Contr ol Guide 6.1 Introduction The electronic equipment typ e switch buttons are used for switching the current electronic equipment type on the remote control. The remote control includes 4 electronic equipment types: DVD, AUDIO, CABLE and TV .
38 English 6. During the setting process, only digit keys ‘0’ through ‘9’ are valid inputs, while other buttons are deemed invalid and do not affect the code settin g. For example, inputting “02” then p ressing RETURN does affect the “02” alread y input.
39 English 1. Press the correspondi ng electronic equip ment button. Th e indicator light will come on for 2 seconds then it goes off; after 3 seconds, the indicator light will come on again, showing that the se tting mode has been entered.
40 English 4. During the setting process, releasing th e electronic equipment button exits the setting mode immediate ly without changing the status prior to setting. 5. Buttons other than CH+/CH- are not functional during search. Channel bu ttons include CH+ and CH-.
41 English 6. Default volume lock setting: 7. Default channel lock setting: Electroni c equipment VOL+, VOL- and Mute Note TV T ransmit TV code Provided by manufacturer CABLE T ransmit CABLE code Unlo.
42 English 6.1.7 Description There is no multi-function co de setting opera tion under TV mode but a fixed code for the TV manufacturer . Therefore, code se tting and code-searching function s are disabled under this mode; other functio ns such as volume lock, channel lock and code display are operable .
43 English 6.3 Component Prog ram Codes Setup Code f or V CR’ s ABC 2102 Admiral 2012, 2022 Aiko 2025 Aiwa 2005, 2027 Alienware 2102 America Action 2025 American High 2004 Amoisonic 2027 Anam 2020, .
44 English Setup Code f or V CR’s Magnin 2024 Marantz 2004, 2016 Marta 2005 Matsushita 2004, 2020 Media Center PC 2102 MEI 2004 Memorex 2004, 2020, 2005, 2012, 2007, 201 1, 2024, 2017, 2022, 2027 MG.
45 English Setup Code f or V CR’s T ashiko 2005 Ta t u n g 2010, 2014 T echnics 2004, 2020 Te c o 2004, 205, 2012, 2006 T eknika 2004, 2005 Tiv o 2048, 2044, 2098, 2059 TMK 2024 To s h i b a 2010, 2.
46 English Setup Code f or DVD’ s Norcent 2078 Onkyo 2029, 2046, 2064 Oritron 2051 Panasonic 2028, 2101 Philips 2029, 2036, 2050 Pioneer 2033, 2039 Polarold 2090, 2086 Polk Audio 2036 Portland 2062 .
47 English Setup Code f or Cable Regal 0016, 0014 Runco 0001 Samsung 0001, 0010 Scientific Atlanta 0059, 0037, 0020, 0003 Sony 0041 S tarcom 0002, 0006 Supercable 0015 Supermax 0038 T ocom 0005 To r x.
48 English Setup Code f or CD Carver 3019, 3022 Dkk 3001 DMX Electronics 3019 Dynam ic Bass 3022 Fisher 3022 Garrard 3027 Genexxa 3005 Harman/ Kardon 3019, 3020 Hitachi 3005 Integra 3013 JVC 3009 Kenw.
49 English Setup Co de for Audio Amp / T uner’s Carver 3042 Denon 3051, 3040 Fonmix 3051 Harman/ Kardon 3014 Hitachi 3047 Integra 3017 JBL 3014 JVC 3010 Kenwood 3050, 3056 KLH 3053 Magnavox 3042, 30.
50 English 7 Setting the TV on the W all Dissembling the stand base: 1 Disconnect all the cables and cords from the TV to prevent breakage. 2 Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Hanns.G ST28FMMR c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Hanns.G ST28FMMR - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Hanns.G ST28FMMR, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Hanns.G ST28FMMR va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Hanns.G ST28FMMR, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Hanns.G ST28FMMR.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Hanns.G ST28FMMR. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Hanns.G ST28FMMR ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
