Manuel d'utilisation / d'entretien du produit HSG 1213 du fabricant Hanns.G
Aller à la page of 26
HSG 1212/ HSG 1213 HSG 1214/ HSG 1215 HL190/HL199 HL229/HL249.
User ’ s Manual OSD[V5.4] Before operating the monitor, please read this ma nual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interfer ence S tatement This equipment has been tested and found to comp ly with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
User ’ s Manual RECYCLING INFORMATION We, the Hanns.G care very much about our environment prot ection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life.
User ’ s Manual T ABLE OF CONTENTS SAFETY NOTICE ..................................................................................................... 5 PRECAUTIONS ....................................................................................
User ’ s Manual SAFETY NOTICE 1. The changes or modifications not expressly approved by the pa rty responsible for compliance could void the user's authority to operate the equipm ent. 2. Shielded interface cables and AC pow er cord, if any , must be used in order to comply with the emission limits.
User ’ s Manual SPECIAL NOTES ON LCD MONITORS The following symptoms are norm al with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the sc reen may flicker during initia l use. T urn of f the Power Switch and then turn it on again to make sure the flicker disappears.
User ’ s Manual BEFORE YOU OPERA TE THE MONIT OR FEA TURES Model: HL190 HL199 HL229 HL249 Size: 47cm/ 18.5” 48,3cm/ 19” 54,6cm/ 21.5” 60cm/ 23.
User ’ s Manual INST ALLA TION INSTRUCTIONS INST ALL REMOVE Figure.1. Installing and Removing the Base INSTALLATION: 1. Turn the monitor over and set it upside down. 2. Align the monitor to the slots on the stand. 3. Pull the screw ring upwards, then turn the screw cl ockwise to secure.
User ’ s Manual SETTING THE MONITOR ON TH E W ALL DISSEMBLING THE ST AND BASE: 1. Disconnect all the cables and cords fr om the Monitor to prevent breakage. 2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the Monitor .
User ’ s Manual MAKING CONNECTIONS CONNECTING TO A PC T urn of f your computer before performing the procedure below . 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer ’ s VGA port.
User ’ s Manual ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor , then adjust the monitor ’ s angle to your own preference. • Hold the stand so you do not topple the mon itor when you change the monitor ’ s angle.
User ’ s Manual OPERA TING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or of f. The other control butt ons are located on the front panel of the monitor (See Figu re 4). By changing these settings, the picture can be adjusted to your personal preferences.
User ’ s Manual FRONT P ANEL CONTROL • Power Button: Press this button to switch ON/OFF of m onitor ’ s power . • Power Indicator: Blue —Power On mode. Flickering —Power Saving mode. • MENU / RETURN: T urn the OSD menu on/of f or return to the previous menu.
User ’ s Manual Resolution 640×400@70Hz ↔ 720×400@70Hz 640×400@85Hz ↔ 720×400@85Hz 640×480@60Hz ↔ 720×480@60Hz 1024×768@70Hz ↔ 1280×768@70Hz 1280×768@60Hz ↔ 1360×768@60Hz 1400×1.
User ’ s Manual HOW T O ADJ UST A SETTINGS BRIGHTNESS/ CONTR AST BRIGHTNESS Adjust the brightness value of the display according to your preference. Select 「 BRIGHTNESS 」 option to adjust the brightness value. CONTRAST Adjust the contrast value of the display according to your preference.
User ’ s Manual display , which does not ensure the image is shown as is or in initial scale. 「 FIT 」 indic ates scaling by the proportion of original images, which may cause the screen showing black bands.
User ’ s Manual the OSD. Enter the option and adjust the level. OSD TIME-OUT Select 「 OSD TIME-OUT 」 option to set the OSD time out from 10 to 100 seconds. Enter the option and adjust the level. OSD COLOR T o choose the color combination of the OSD window , select 「 OSD COLOR 」 option under 「 OSD SETTING 」 menu, choose modes 1/2/3.
User ’ s Manual PLUG AND PLA Y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capa bilities according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, depe nding on the level of DDC used, communicate additional information about its display capabilities.
User ’ s Manual TECHNICAL SUPPOR T (F AQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position. *Power Cord should be connected. No Plug & Play *Check if the PC system is Plug & Play compatible.
User ’ s Manual INPUT as a PC option, and make sure PC audio output cable is connected to monitor’s LINE IN port(or AUDIO IN port) . [For HDMI Input only] Addendum related to Windows 7 When you encounter display problem under Windows 7, you need to do the following: 1.
User ’ s Manual ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED: 1. Check that the signal-cable is properly connect ed, if the connector is loose, tighten the connector ’ s screws. 2. Check the signal-cable’ s connection pins for damage.
User ’ s Manual 27 1440×900 @60Hz 55.469 59.901 ▲ ▲ ▲ 28 1440×900 @75Hz 70.635 74.984 ▲ ▲ ▲ 29 1400×1050 @60Hz 64.744 59.948 ▲ ▲ 30 1680×1050 @60Hz 65.
User ’ s Manual APPENDIX SPECIF ICA TIO NS HL190A Driving system TFT Color LCD Size 47cm / 18.5” Diagonal LCD Panel Pixel pitch 0,3mm(H) × 0,3mm(V) H-Frequency 24KHz – 61KHz V ideo V -Frequency 56Hz – 75Hz Display Colors 16.7M Colors Max. Resolution 1366 × 768 @60Hz Plug & Play VESA DDC 2B TM ON Mode 18W (T ypical)/ HL190AB 19.
User ’ s Manual SPECIF ICA TIO NS HL199A Driving system TFT Color LCD Size 48,3cm / 19” Diagonal LCD Panel Pixel pitch 0,283mm(H) × 0,283mm(V) H-Frequency 24KHz – 75KHz V ideo V -Frequency 56Hz – 75Hz Display Colors 16.7M Colors Max. Resolution 1440 × 900 @75Hz Plug & Play VESA DDC 2B TM ON Mode 18W (T ypical) Power Saving Mode ≤ 0.
User ’ s Manual SPECIF ICA TIO NS HL229D Driving system TFT Color LCD Size 54,6cm / 21.5” Diagonal LCD Panel Pixel pitch 0,248mm(H) × 0,248mm(V) H-Frequency 30KHz – 83KHz V ideo V -Frequency 56Hz – 75Hz Display Colors 16.
User ’ s Manual SPECIF ICA TIO NS HL249D Driving system TFT Color LCD Size 60cm / 23.6” Diagonal LCD Panel Pixel pitch 0,271mm(H) × 0,271mm(V) H-Frequency 30KHz – 83KHz V ideo V -Frequency 56Hz – 75Hz Display Colors 16.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Hanns.G HSG 1213 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Hanns.G HSG 1213 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Hanns.G HSG 1213, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Hanns.G HSG 1213 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Hanns.G HSG 1213, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Hanns.G HSG 1213.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Hanns.G HSG 1213. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Hanns.G HSG 1213 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
