Manuel d'utilisation / d'entretien du produit HSG 1147 du fabricant Hanns.G
Aller à la page of 24
HL225 HSG 1 147 OSD[V4.393].
User ’ s Manual 2 Before operating the monitor , please read this manua l thoroughly . This manual should be retained for future reference. FCC Class B Radio Frequency Interfer ence S tatement This equipment has been tested and found to comp ly with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
User ’ s Manual 3 Congratulations! This display is designed for both you and the planet! The display you have just purchased carries the TCO Certified label. This ensures that your display is designed, manufactured and test ed according to some of the strictest quality and environmental requirem ents in the world.
User ’ s Manual 4 RECYCLING INFORMATION We, the Hanns.G care very much about our environment prot ection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life.
User ’ s Manual 5 T ABLE OF CONTENTS SAFETY NOTICE .................................................................................................. 6 PRECAUTIONS .....................................................................................
User ’ s Manual 6 SAFETY NOTICE 1. The changes or modifications not expressly approved by the pa rty responsible for compliance could void the user's authority to operate the equipm ent. 2. Shielded interface cables and AC pow er cord, if any , must be used in order to com ply with the emission limits.
User ’ s Manual 7 SPECIAL NOTES ON LCD MONITORS The following symptoms are norm al with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the sc reen may f licker during initial use. T urn off the Power Switch and then turn it on again to make sure the flicker disappears.
User ’ s Manual 8 BEFORE YOU OPERA TE THE MONIT OR FEA TURES • 54,6cm / 21.5” W ide Screen W -LED Backlight Monitor • Crisp, Clear Display for W indows • EP A ENERGY ST AR ® • GP Green Pr.
User ’ s Manual 9 INST ALLA TION INSTRUCTIONS I N S T A L L R E M O V E Figure.1. Installing and Removing the Base INSTALLATION: 1. Align the monitor with the opening in the base. 2. Note that the longer section of the base points forward. 3. Snap the monitor into its base.
User ’ s Manual 10 SETTING THE MONITOR ON THE W ALL DISSEMBLING THE ST AND BA SE: 1. Disconnect all the cables and cords from the Monitor to prevent breakage. 2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the Monitor .
User ’ s Manual 11 MAKING CONNECTIONS CONNECTING TO A PC T urn off your computer before performing the procedure below . 1. Connect one end of the D-Sub cable to the back of the monitor and connect the o ther end to the computer ’ s D-Sub port. 2.
User ’ s Manual 12 ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to loo k at the full face of the monitor , then adjust the monitor ’ s angle to your own preference. • Hold the stand so you do not topple the m on itor when you change the monitor ’ s angle.
User ’ s Manual 13 OPERA TING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or of f. The other control buttons are located on the front panel of the monitor (See Figure 4). By changing thes e settings, the picture ca n be adjusted to your personal preferences.
User ’ s Manual 14 FRONT P ANEL CONTROL • Power Button: Press this button to switch ON/OFF of m onitor ’ s power . • Power Indicator: Green — Power On mode. Orange — Power Saving mode. • MENU / RETURN: T urn the OSD menu on/off or return to the previous menu.
User ’ s Manual 15 Resolution 640x400@70Hz ↔ 720x400@70Hz 640x400@85Hz ↔ 720x400@85Hz 640x480@60Hz ↔ 720x480@60Hz 1280x768@60Hz ↔ 1360x768@60Hz 1400x1050@60Hz ↔ 1680x1050@60Hz 1400x1050@RB 60Hz ↔ 1680x1050@RB 60Hz ** The scree n resolutions available will depend on the purchased m odel.
User ’ s Manual 16 HOW T O ADJUST A SETTINGS BRIGHTNESS/ CONTRAST BRIGHTNESS Adjust the brightness value of the display according to your preference. Select 「 BRIGHTNESS 」 option to adjust the brightness value. CONTRAST Adjust the contrast value of the display accordin g to your preference.
User ’ s Manual 17 display , which does not ensure the image is shown as is or in initial scale. 「 FIT 」 ind icates scaling by the proportion of original images, which may cause the screen showing black bands.
User ’ s Manual 18 the OSD. Enter the option and adjust the level. OSD TIME-OUT Select 「 OSD TIME-OUT 」 option to set the OSD time out from 10 to 100 seconds.
User ’ s Manual 19 PLUG AND PLA Y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B c apa bilities according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, depe nding on the level of DDC used, communicate additional informa tion about its display capabilities.
User ’ s Manual 20 TECHNICAL SUPPOR T (F AQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position. *Power Cord should be connected. No Plug & Play *Check if the PC system is Plug & Play compatible.
User ’ s Manual 21 INPUT as a PC option, and make sure PC audio output cable is connected to monitor’s LINE IN port(or AUDIO IN port) . [For HDMI Input only] Addendum related to Windows 7 When you encounter display problem under Windows 7, you need to do the following: 1.
User ’ s Manual 22 ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED : 1. Check that the signal-cable is properly connected, If the conn ector is loose, tighten the connector ’ s screws. 2. Check the signal-cable’ s connection pins for damage.
User ’ s Manual 23 (V ideo mode) MODE RESOL UTION 1 640 × 480p @60Hz 2 720 × 480p @60Hz 3 720 × 576p @50Hz 4 1280 × 720p @60Hz 5 1920 × 1080i @50Hz 6.
User ’ s Manual 24 APPENDIX SPECIF ICA TIONS LCD Panel Driving system TFT Color LCD Size 54,6cm / 21.5” Diagonal Pixel pitch 0.248mm(H) x 0.248mm(V) V i deo H-Frequency 24KHz – 85KHz V -Frequency 56– 75Hz Display Colors 16.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Hanns.G HSG 1147 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Hanns.G HSG 1147 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Hanns.G HSG 1147, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Hanns.G HSG 1147 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Hanns.G HSG 1147, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Hanns.G HSG 1147.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Hanns.G HSG 1147. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Hanns.G HSG 1147 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
