Manuel d'utilisation / d'entretien du produit TCF20 du fabricant Haier
Aller à la page of 48
Before operating the unit, please read this manual thoroughly . OWNER S MANUAL ' OWNER S MANUAL A TSC TV/DVD COMBO POWER TV/DVD OPEN/CLOSE Q.VIEW INFO MUTE 12 3 4 5 6 7 8 9 9 0 0 CC P.MODE CH+ CH- VOL _ MENU OK STOP SETUP PAUSE/STEP REV FWD . PREV NEXT D.
1 PRECAUTIONS FCC WARNING -This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
1. READ THESE INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. KEEP THESE INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED ALL WARNINGS All warnings on the unit and in the operating instructions should be adhered to.
3 Important safety Instructions 18. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall onto or against such power lines or circuits.
4 Important safety Instructions 23. DAMAGE REQUIRING SERVICE Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the unit.
Installation Preparation for the remote control Battery installation Tips for remote operation Remove the battery cover. ! When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries to prevent leakage.
Parts and functions Front panel the TV set Power Switch Power Indicator Signal Receiver Video R/L Audio Menu TV/AV/DVD Switching Volume up/ down Channel Position up/down Open/close the DVD Play the DV.
Using the Remote Control Q.VIEW button: SAP button: CC P.MODE (picture mode): TV Sleep button CH.LIST (channel list) GUIDE FAV .LIST (favorite list) SIZE: Aspect Ratio Control under 16:9 digital signa.
8 The other video and audio equipment Connections You can connect the DVD,VCR and stereo system to the output to enjoy a higher quality of picture and sound effect.
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see the Cable TV connections.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE For basic cable service not requiring a Converter/Descrambler box, connect the 75 ohm Coaxial Cable directly to the RF IN Jack on the back of the unit.
Video Game Using the audio/video inputs If you connect the TV to a camcorder or Video Game, you can select different modes by pressing TV/AV . Press TV/AV repeatedly to select the desired mode. "AV1 V channel will display on the screen for 4 seconds, No signal will be displayed on the screen when there is no signal input.
POWER TV/DVD OPEN/CLOSE Q.VIEW INFO MUTE 1 2 3 4 5 6 7 8 9 9 0 0 CC P .MODE CH+ CH- VOL _ MENU OK STOP SETUP P AUSE/STEP REV FWD . PREV NEXT D.MENU REPEAT A-B PLAY/ENTER SLOW ANGLE TITLE/PBC SEARCH AUDIO CLR D.CALL TV/AV PROGRAM ZOOM 10+ VOL + SUBTITLE - TV/DTV SAP SLEEP CH.
AUTO SCAN (DTV/ATV) (When using antenna) The channels broadcasted in DTV and A TV are automatically scanned and memorized. Only the receivable channels in the area where this TV is used will be memorized. AUTO SCAN (CATV) (When using basic cable) The channels broadcasted in CATV are automatically scanned and memorized.
Channel menu SETTING SKIP 0101 SKIP OFF RECEPTION AIR AUTO SCAN COLOR SYSTEM AUT O CHANNEL 1 Press MENU , and then press VOL+/- button to select CHANNEL menu, then press CH- button to enter. 2 Press CH+/- button to select the SKIP option, then press VOL+/- button to select ON or OFF .
You can select the channel by using either CH +/- button or Channel number buttons. How to select the channel in each way is shown below . Channel selection CABLE VHF 2-13 STD/HRC/IRC 14-36 (A) (W) 37.
This section describes how to adjust the volume when viewing TV . The MUTE function, which is useful when you have a visitor or a phone call, will be also described. 1 Using VOL +/- button You can adjust the audio volume with VOL +/- button on the remote control.
You can display the currently selected channel number or other information such as the audio mode on the screen for checking. In the analog mode, the currently selected channel number and the audio mode are displayed. 1 Display the channel number and the audio mode.
Video menu 1 Press MENU button. The main menu screen will appear. 2 Press VOL+/- button to select VIDEO Option, then press CH- button to enter . 3 Press CH+/- to select the desired option, then press VOL+/- to adjust.
Audio menu 1 Press MENU button. The main menu screen will appear. 2 Press VOL+/- button to select AUDIO Option, then press CH- button to enter . 3 Press CH+/- to select the desired option, then press VOL+/- to adjust. SETTING AUDIO 19 0101 VOLUME 20 AUDIO Volume This will adjust the sound output level.
Manual time setting You must set the time manually for ON/OFF Timer. After a power failure or disconnection of the power, the time will get lost. In this case, reset the preset time. NOTE: EXAMPLE: Setting the time to "8:30 AM" TO SET TIME 1 Press MENU.
Setting the ON/OFF timer This feature allows you to have the TV automatically turn on/off at a time. If you program 1 Press MENU. The main menu screen will appear . SETTING THE TIMER ON 21 0101 TIME --:-- AM TIMER OFF --:-- AM TIMER ON --:-- AM TIME predetermined the ON/OFF TIMER, the TV will turn on/off at the time your predetermined time.
0101 LANGUAGE ENGLISH BLUE SCREEN ON NTSC CAPTION C1 PARENTAL LOCK FUNCTION Function menu SETTING THE NTSC CAPTION 1 . Press the MENU button and then use VOL+/- button to select the FUNCTION menu.
TO REGISTER P ASSWORD An age limitation can be set to forbid children to see and hear violent scenes or pictures for adults, etc. The TV Corresponds to use theparental control function, you must register a password. NOTES: If you forget the password, you cannot set the .
TO CHANGE PASSWORD NOTES: If you forget the password, you cannot set the Parent Control. To avoid forgetting the password, write it down and keep it in a safe place. 5 Enter the new password using the number buttons (0-9) . 7 Press MENU until the MENU screen disappears.
To use the TV after is Parent Control activated. When the program applied to the Parental Control setting is received, enter the password. When the password is entered correctly the protection will be temporarily overridden. NOTE: The Parental Control function is activated only on programs and tapes that support the rating.
1 Enter the PARENT CONTROL menu. TO SET THE MPAA RATING 2 Press CH+/- button to select MPAA RATING , then press VOL+ button to enter the submenu. 3 Press CH+/- button to select the desired rating. MPAA-X MPAA-NC-17 MPAA-R MPAA-PG-13 MPAA-PG MPAA-G MPAA-NR 5 Press MENU until the MENU screen disappears.
NOTES: Captions: This closed caption mode will display text on the screen in English or another language (depending on the set- ting of the closed captions). Generally , closed captions in English are transmitted on captions CC 1 and closed captions in other languages are transmitted on Captions CC 2.
DTV setup menu SETTING CLOSED CAPTION MODE 1 Press MENU. The main menu screen will appear . 2 Press VOL+/- button to select DTV SETUP . then press CH- button to enter the submenu. 3 Press CH+/- button to select DTV CC. 4 Press VOL+ button and then press CH+/- button to select CAPTION MODE .
SETTING THE DTV CAPTION STYLE 1 Press MENU. The main menu screen will appear . 2 Press VOL+/- button to select DTV SETUP . then press CH- button to enter the submenu.
SETTING THE DTV CAPTION STYLE(continue) Style Select this option to select the font style of caption display according to your own preference. Press the VOL+/- button to select Style1, Style2, Style3, Style4,Style5, Style6, Style7, Style8. Size Select this option to select the size of caption display according to your own preference.
Daylight saving time is automatically set by specially broadcasted signals. This menu item allows you to disable the automatic setting of daylight saving time. This is useful if you live in an area or state where daylight saving is not applied, but you receive channels from other areas where daylight saving signals are broadcasted.
SETTING A TSC PARENT AL LOCK 1 Press MENU. The main menu screen will appear . 2 Press CH+/- button to select DTV SETUP . then press VOL- button to enter the submenu. 0101 DTVCC DAYLIGHT SA VING OFF TIME ZONE ALASKA ATSC P ARENTAL LOCK DTV SETUP 3 Press CH+/- button to select ATSC PARENT AL LOCK.
- This activates some, but not all, electronic program guides (EPG data) when it is used and transmitted by some DTV station providers. It is only supported when receiving DTV channels.
1 2 3 Suppose the channel number you used just now is 8 and the channel number you are using is 18 (as shown in the figure). If you want to return to the last watched program channel 8, you can simply press the Q.VIEW button. If you want to return to channel 18, press the button again.
35 DVD Features Basic Playback Preparations 1. Press OPEN/CLOSE to open the disc tray, place a disc in the disc tray. There are two different disc sizes. Place the disc in the correct GUIDE on the disc tray. If the disc is out of the GUIDE, it may damage the disc and cause the DVD player to malfunction.
36 Advanced Playback Advanced Playback PROGRAM When playing discs, press "PROGRAM" to enter program mode. Press the digit buttons to select the program number that you want. When finished move the cursor to select "ST ART" . This will start the program playback.
37 Special Playback Functions JPEG DISC PLAYBACK MP3 PLAYBACK SCREEN SAVER FUNCTION When playing an MP3 disc, a navigation menu will be displayed automatically . In the menu, use UP or DOWN cursor buttons to choose the folder, then press PLA Y/ENTER to enter the folder.
38 DVD System Setup DVD System Setup General Setup Process 1.Press the SETUP button, the General Setup Page,Preference Page will be displayed in turn. 2.Press CH+/- b to select, the item, then press to enter the submenu. 3.Press CH+/- bu to select then press PLA Y/ENTER to confirm.
39 DVD System Setup(Continued) DVD System Setup General Setup Page CAPTIONS: This function allows you to display or hide the caption. SCREEN SAVER: If the screen saver is on, then there will be an animated picture of DVD on the screen whenever the DVD player is idle for more than 3 minutes .
40 DVD System Setup(Continued) DVD System Setup The Preference Page is only available when there is no disc in the player. These settings are applied consistently to all discs which are inserted and played. Preference Page PARENT AL: The parental control function works in conjunction with the different censorship classes assigned to DVDs.
41 DVD System Setup(Continued) DVD System Setup DEFAUL T : Resets all settings (except password and parental lock status) for this DVD player back to the manufacturers original settings. Press ENTER to perform the reset. Note: Some functions may not be available depending on the type of disc.
42 The following discs can be played: Playable Discs You cannot play discs other than those listed above. You cannot play non-standardized discs, even if they may be labelled as above. The performance of CD-R or CD-RW disc depends on the way the disc was burned.
43 Disc Protection and DVD Characteristics Compare DVD disc with other discs: DVD LD SVCD VCD CD Encode method Digital/MPEG Analog Digital Digital/ MPEG Digital Capacity 650MB 650MB 650MB 133 minutes .
Troubleshooting guide T o assist in location possible faults use help guide below . BREAKDOWN PHENOMENON PICTURE SOUND CHECKING The aerial direction and connection Ensure that the power supply is connected to the TV set and turned on.
Specifications 45 The specifications offered you here are for reference only. With product improvement there may be some differences between the description and the final product. NOTE Design and specifications are subject to change without notice. Dimensions quoted in this manual are approximate.
46 Warranty This Haier brand product, when shipped in its original packaging, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or.
0090500177 Ver.1 .0.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Haier TCF20 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Haier TCF20 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Haier TCF20, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Haier TCF20 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Haier TCF20, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Haier TCF20.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Haier TCF20. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Haier TCF20 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
