Manuel d'utilisation / d'entretien du produit LCD 51-6605 BS du fabricant Grundig
Aller à la page of 29
ǵ COLOR TELEVISION AMIRA 15 LCD 38-6605 BS AMIRA 17 LW 45-6605 BS AMIRA 20 LCD 51-6605 BS DEUTSCH ENGLISH FRANÇAIS IT ALIANO NEDERLANDS TÜRK ÇE POLSKI.
2 CONTENTS ____________________________________________ 3-4 Set-up and safety 5-6 Connection/Preparation 5-6 Connecting the antenna and the mains cable 6 Adjusting the inclination of the screen 7-9 Ov.
ENGLISH 3 SET -UP AND SAFETY ___________________________ Please note the following information when setting up your television set. This television set is designed to receive and display video and audio signals. Any other use is expressly prohibited. The ideal viewing distance is 5 times the screen diagonal.
4 Please note when deciding where to put the device that furniture surfaces are covered by various types of lacquer and plastic, most of which contain chemical additives. These may cause corrosion to the feet of the device, thus resulting in stains on the surface of the furniture which can be difficult or impossible to remove.
ENGLISH 5 CONNECTION/PREP ARA TION __________ Connecting the antenna and the mains cable 1 T ake off the cover (A). 2 Plug the antenna cable of the rooftop antenna into the »ANT IN Ä « antenna socket on the television. 3 Plug the mains cable supplied into the mains socket of the power unit.
6 Inserting batteries in the remote control 1 Open the batter y compartment by removing the lid. 2 Insert the batteries (Mignon type, for example UM-3 or AA, 2x1,5V). Obser ve the polarity (marked on the base of the batter y compartment). 3 Close the batter y compartment.
ENGLISH 7 Controls on the television • Operation indicator . +P – Switches the television on from standby; Channel selection. TV/A V Selects the A V channels and the most recently viewed television channel. MENU Opens the »INFO« menu. + z – Adjusts the volume.
8 OVER VIEW ____________________________________________ The remote control Ǽ Switches off the television set (stand-by). PIP Key has no function. E Switches between picture formats. -/-- Switches to the PC channel position; switches to double character size in teletext mode.
ENGLISH 9 OVER VIEW ____________________________________________ z Selects various picture settings; scrolls back a page in teletext mode Ȅ T ime on; scrolls to the next page in teletext mode. Ƿ Ƿ Selects the desired chapter in teletext mode. F Selects various audio settings ∞ selects the desired topic in teletext mode.
10 Setting television channels automatically The television set is equipped with an automatic channel search system. Y ou star t the search and can then sort the television channels into your order of preference. 99 preset positions are provided, to which you can assign television channels from the antenna or from the cable connection.
ENGLISH 11 Deleting channels 1 In the »PROGRAM T ABLE« menu, select the station to be dele- ted with » P+ «, » P- «, » Ǹ « or » Ƿ «. 2 Press » Ƿ Ƿ « (yellow) to delete the channel. Note: To delete other stations, repeat steps 1 and 2 .
12 Picture settings 1 Press » i « to open the »INFO« menu. – The »INFO« menu appears. 2 Select »PICTURE« with » P+ « or » P- « and confirm with » OK «. – The »PICTURE« menu appears. 3 Select »BRIGHTNESS«, »CONTRAST«, »COLOUR« or »SHARPNESS« with » P+ « or » P- « and adjust them with » Ǹ « or » Ƿ «.
ENGLISH 13 Stereo width Widens the audio output for stereo programmes and improves the sound with mono reception. 1 Select »SOUND MODE« with » P+ « or » P- «.
14 Basic functions Switching on and off 1 Switch on the television by pressing the » IO « button on the television set. – The device switches to standby mode. Switch the television on with » 1… 0 « or » P+ « or » P- «. 2 Press the » Ǽ « button to switch the television to standby mode.
ENGLISH 15 Changing the picture format 1 Select the picture format with » E «. – Y ou can choose between the following picture formats: »4:3« format The picture is shown in 4:3 format. »AUTO« format The picture format is automatically switched to »16:9« for 16:9 programmes.
16 TOP text or FLOF text mode 1 Press » TXT « to switch to teletext mode. 2 Y ou can directly select teletext pages with » 1. . . 0 «. Note: At the bottom of the screen, you will see an information line consisting of a red, green and, depending on the station, yellow and blue text field.
ENGLISH 17 Page stop A multiple page may contain several sub-pages, which are automa- tically scrolled by the transmitting station. 1 Stop the sub-pages with » PA P «. – » « is displayed instead of the page number . 2 Press » PA P « to quit the function.
18 Convenience functions with the »FEA TURES« menu 1 Press » i « to open the »INFO« menu. 2 Select »FEA TURES« with » P+ « or » P- « and confirm with » OK «. Note: Further operation is explained in the following sections. Changing the menu language 1 Select »LANGUAGE« with » P+ « or » P- « and confirm with » OK «.
ENGLISH 19 USING EXTERNAL DEVICES _______________ Note: Do not connect any other equipment while the device is switched on. Switch off the other equipment as well before connecting it. Only plug the device into the mains socket after you have connected the external devices and the antenna.
20 USING EXTERNAL DEVICES _______________ Decoder or satellite receiver In order for the television to receive encoded programs from a privately operated station, a decoder is needed. Connecting a decoder or satellite receiver 1 Connect the » AV 1 « socket on the television set and the appropriate socket on the decoder using a EURO-A V cable.
ENGLISH 21 USING EXTERNAL DEVICES _______________ Camcorder Connecting the camcorder 1 Connect the yellow socket » A V3 Video « on the television and the corresponding socket on the camcorder (VHS, .
22 Note: The Amira 20 is not suitable for use with a PC. Connecting a PC 1 Connect the » VGA « socket on the television set and the appro- priate socket of the PC using a VGA cable. Selecting the channel position for the PC 1 Select the PC channel position with » -/-- «.
ENGLISH 23 Setting television channels This setting is only necessar y if a new channel comes on air and you do not want to change the order of your channels. The television channel can be set directly or using the search. Setting channels using the search 1 Press » i « to open the »INFO« menu.
24 Fine tuning television channels The television automatically tunes itself to the best possible recepti- on. Y ou may need to carr y out manual fine tuning in areas where there is poor reception. 1 Press » i « to open the »INFO« menu. – The »INFO« menu appears.
ENGLISH 25 Re-tuning all television channels Y ou can re-tune all the television stations, for example if you move to another town. 1 Press » i « to open the »INFO« menu. – The »INFO« menu appears. 2 Select »SETUP« with » P+ « or » P- « and confirm with » OK «.
26 Subject to alteration and correction! T echnical data Operating voltage: DC 12 V , 4 A with 100 – 240 V mains adapter , 50/60 Hz (Amira 15) DC 12 V , 5 A with 100 – 240 V mains adapter , 50/60 .
ENGLISH 27 INFORMA TION _____________________________________ Fault Screen lit (snow), but no station Poor picture contrast Interference to picture and/or sound Ghosts, reflection No colour Picture bu.
28 Additional Information for units sold in the UK. Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains supply . The range of multi-system receivers is built to work in most European coun- tries. However , the mains plug and socket system for the UK dif fers from many European countries.
Grundig Multimedia B.V . • Atrium, Strawinskylaan 3105 • NL-1077 ZX Amsterdam • http://www .grundig.com.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Grundig LCD 51-6605 BS c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Grundig LCD 51-6605 BS - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Grundig LCD 51-6605 BS, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Grundig LCD 51-6605 BS va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Grundig LCD 51-6605 BS, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Grundig LCD 51-6605 BS.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Grundig LCD 51-6605 BS. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Grundig LCD 51-6605 BS ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
