Manuel d'utilisation / d'entretien du produit G1067Z du fabricant Grizzly
Aller à la page of 31
Wood Lathe ModeL G1067Z InStructIon ManuaL Copyright © 1996 By grizzly industrial, inC. revised July, 2009 (tr) WarnInG: no portIon of thIS ManuaL May be reproduced In any Shape or forM WIthout the WrItten approvaL of GrIZZLy InduStrIaL, Inc. #5983 printed in taiwan.
WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints.
SECTION 1: SAFETY ........................................................................................................................2 Safety Instructions For Power Tools ...........................................................................
-2- G1067Z Wood Lathe 5. KEEP CHILDREN AND VISITORS AWAY . All children and visitors should be kept at a safe distance from work area. 6. MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing starter keys. 7. NEVER FORCE TOOL . It will do the job better and safer at the rate for which it was designed.
G1067Z Wood Lathe -3- 9. USE PROPER EXTENSION CORD . Make sure your extension cord is in good condi- tion. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
-4- G1067Z Wood Lathe Additional Safety Instructions For The Lathe No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect.
G1067Z Wood Lathe -5- We are proud to offer the Model G1067Z. This machine is part of a growing Grizzly family of fine woodworking machinery. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoyable operation and proof of Grizzly’s commitment to customer satisfaction.
-6- G1067Z Wood Lathe After all the parts have been removed from the carton, you should have: • Main Lathe Unit • Grizzly Paddle Switch • Front/Rear Covers • Index Pin • 6'' Face P.
G1067Z Wood Lathe -7- The unpainted surfaces are coated with a waxy oil to protect them from corrosion during ship- ment. Remove this protective coating with a sol- vent cleaner or citrus-based degreaser such as Grizzly’s G7895 Degreaser. To clean thoroughly, some parts may need to be removed.
-8- G1067Z Wood Lathe Circuit Requirements Amperage Draw The Model G1067Z motor is wired to operate at 110V and will draw the following load: Motor Load ..............................................8 Amps Plug Type The Model G1067Z is supplied with a NEMA 5-15 plug.
G1067Z Wood Lathe -9- In the event of an electrical short, grounding reduces the risk of electric shock by providing a path of least resistance to disperse electric cur- rent. This tool is equipped with a power cord that has an equipment-grounding prong.
-10- G1067Z Wood Lathe Assembly of the G1067Z is straightforward. We have organized the assembly process into steps. Please follow them in sequence. Tools Required: Only a few common tools are needed to assemble this machine.
G1067Z Wood Lathe -11- Figure 3. Figure 4. 4. With an assistant, set the lathe bed assem- bly on the stand, orienting the front of the headstock with the switch opening in the stand leg. Bolt the lathe bed to the stand using the eight 5 ⁄ 16 ''-18 x 1 cap screws and hex nuts supplied and tighten down ( Figure 4 ).
-12- G1067Z Wood Lathe Note— The paddle switch is equipped with a removable safety key ( Figure 7 ). When the lathe is not be in use, the safety key should be removed from the paddle switch and placed in a safe location. The lathe cannot be turned on when the safety key is removed from the paddle switch.
G1067Z Wood Lathe -13- Figure 10. Figure 11. The G1067Z is supplied with a #2 Morse taper spur center for use when spindle turning. The spur center is used in conjunction with the tail- stock live center. Install the spur center by insert- ing into the hole in the inboard spindle ( Figure 10 ) .
-14- G1067Z Wood Lathe The Model G1067Z headstock can be swiveled 180˚ as well as positioned anywhere along the bed. 1. Loosen the quick release lever by pushing it down ( Figure 13 ) . 2. Move the headstock to the desired position and re-engage the quick release lever ( Figure 14 ).
G1067Z Wood Lathe -15- 3. Release the set pin. Make sure the set pin has engaged in its detent by trying to rotate the headstock. 4. Now position the head stock along the bed as desired and engage the quick release lever. The tailstock is equipped with a cam-action clamping system to secure it to the lathe bed.
-16- G1067Z Wood Lathe (1) The tailstock barrel lock handle (Figure 19) must always be locked down while the lathe is in use. The workpiece can be thrown from the lathe if this step is not observed. (2) The tailstock barrel should not protrude from the tailstock housing more than 2''.
G1067Z Wood Lathe -17- Adjust the tool rest as close to the workpiece as possible without actually coming in contact with the workpiece. Test by hand turning the work- piece before turning lathe on. Ensure that the lathe chisel is fully supported by the tool rest.
-18- G1067Z Wood Lathe Spindle Turning Make sure the live center in the tailstock lines up with the spur center in the head- stock before turning anything between centers. Failure to observe this step could result in the workpiece being thrown from the lathe.
G1067Z Wood Lathe -19- Outboard turning is usually done when stock diameter is greater than 12''. For the size of this particular lathe and its minimum turning speed, we recommend a maximum diameter of 17'' and a maximum thickness of 2''.
-20- G1067Z Wood Lathe The G1067Z Lathe is equipped with a split pulley system which allows the speed of the lathe to be changed while its running. To assure the smooth operation of this pulley system, we recommend the main spindle and motor spindle be greased occasionally.
G1067Z Wood Lathe -21- SECTION 6: CLOSURE The following pages contain general machine data, parts diagram, parts list and Warranty/Return information for your Model G1067Z Lathe. If you need parts or help in assembling your machine, or if you need operational information, we encourage you to call the appropriate region- al Service Department.
-22- G1067Z Wood Lathe Design Type ......................................................................................................Floor Model Overall Dimensions: Including Stand ..................................................................
105V2 G1067Z Wood Lathe -23-.
59 59 46A -24- G1067Z Wood Lathe.
G1067Z Wood Lathe -25- 1 P1067Z001 BED 2 P1067Z002 HEADSTOCK 3 P6205 BEARING 6205 4 P1067Z004 INDEXING BLOCK 5 P1067Z005 MAIN SPINDLE 6 PFH08 FLAT HD SCR 10-24 X 1 ⁄ 2 '' 7 PK88M KEY 4 X 4.
Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
CUT ALONG DOTTED LINE 9. How many of your woodworking machines are Grizzly? _____________ 10. Which benchtop tools do you own? Check all that apply. ___1" x 42" Belt Sander ___6" - 8&qu.
FOLD ALONG DOTTED LINE FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 Place Stamp Here TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name_____________________________.
Buy Direct and Save with Grizzly ® – Trusted, Proven and a Great Value! -OR- • SECURE ORDERING • ORDERS SHIPPED WITHIN 24 HOURS • E-MAIL RESPONSE WITHIN ONE HOUR Visit Our Website T oday And .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Grizzly G1067Z c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Grizzly G1067Z - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Grizzly G1067Z, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Grizzly G1067Z va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Grizzly G1067Z, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Grizzly G1067Z.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Grizzly G1067Z. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Grizzly G1067Z ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
