Manuel d'utilisation / d'entretien du produit G0529 du fabricant Grizzly
Aller à la page of 36
COPYRIGHT © SEPTEMBER, 2003 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. PRINTED IN TAIWAN ONLINE MANUAL DISCLAIMER THE INFORMATION IN THIS MANUAL REPRESENTS THE CONFIGURATION OF THE MACHINE AS IT IS CURRENTLY BEING SHIPPED.
WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activi- ties contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints.
SECTION 1: SAFETY ............................................................................................................................2 Safety Instructions For Power Tools .......................................................................
-2- G0529 Oscillating Spindle & Disc Sander 5. KEEP CHILDREN AND VISITORS AWAY . All children and visitors should be kept at a safe distance from work area. 6. MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing starter keys. 7.
G0529 Oscillating Spindle & Disc Sander -3- 9. USE PROPER EXTENSION CORD . Make sure your extension cord is in good condi- tion. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate.
-4- G0529 Oscillating Spindle & Disc Sander No list of safety guidelines can be com- plete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect.
G0529 Oscillating Spindle & Disc Sander -5- We are proud to offer the Model G0529 Oscillating Vertical Spindle Sander & 12" Disc Sander. This machine is part of a growing Grizzly family of fine woodworking machinery.
-6- G0529 Oscillating Spindle & Disc Sander Amperage Draw The Model G0529 1 HP motor is wired to operate at 110V and will draw the following load: Motor Load ............................................10 Amps Plug Type The Model G0529 is supplied with a NEMA 5-15 plug.
G0529 Oscillating Spindle & Disc Sander -7- Grounding In the event of an electrical short, grounding reduces the risk of electric shock by providing a path of least resistance to disperse electric cur- rent. This tool is equipped with a power cord that has an equipment-grounding prong.
-8- G0529 Oscillating Spindle & Disc Sander 1. Sanding Spindle 2. Cast Iron Spindle Sanding Table 3. Power Switch 4. Motor 5. Sanding Disc 6. Cast Iron Disc Sanding Table 7. Miter Gauge 8. Dust Ports (Spindle Port Not Shown) 9. Cabinet 10. Graduated Scales SECTION 4: MACHINE FEATURES Figure 2.
G0529 Oscillating Spindle & Disc Sander -9- The Model G0529 Oscillating Spindle & 12" Disc Sander was carefully packed at the factory. If you discover the machine is damaged after you have signed for delivery, and the truck and driver are gone, you will need to file a freight claim with the carrier.
-10- G0529 Oscillating Spindle & Disc Sander 5mm 10mm 15mm 20mm 25mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm Washer Lock Washer Hex Nut Wing Nut Phillips Head Sheet Metal Screw Setscrew .
G0529 Oscillating Spindle & Disc Sander -11- Site Considerations Clean Up The unpainted surfaces are coated with a waxy oil to protect them from corrosion during ship- ment. Remove this protective coating with a sol- vent cleaner or citrus-based degreaser such as Grizzly’s G7895 Degreaser.
-12- G0529 Oscillating Spindle & Disc Sander Beginning Assembly Loose hair and clothing could get caught in machinery and cause serious personal injury.
G0529 Oscillating Spindle & Disc Sander -13- Installing Spindle Mounting Sander To install the spindle onto the sander: 1. Disconnect the machine from the power supply .
-14- G0529 Oscillating Spindle & Disc Sander To square the sanding tables: 1. Disconnect the machine from the power sup- ply. 2. Set the table at 90˚ as shown in Figure 8 . 3. Place a machinist square on the table and against the sanding spindle to verify the table is 90˚ from the edge of the sanding sleeve as shown in Figure 9 .
G0529 Oscillating Spindle & Disc Sander -15- Figure 10. Squaring the sanding table. 5. If the table is not 90˚ from the spindle, adjust the table stop bolt to allow the table to move more as shown in Figure 10 . Figure 11. Squaring the sanding table.
-16- G0529 Oscillating Spindle & Disc Sander The table must be aligned to the face of the sand- ing disc so that the sandpaper does not rub against the table. To align the table: 1. Loosen the bolts that secure the table to the table support bracket as shown in Figure 13 .
G0529 Oscillating Spindle & Disc Sander -17- Figure 15. Dust ports. Dust Collection Miter Gauge There are two 2" dust collection ports for the sander that should be connected to a dust collec- tor. The ports are located under the sanding tables as shown in Figure 15 .
G0529 Oscillating Spindle & Disc Sander -18- Damage to your eyes, lungs, and ears could result from failure to wear safety glasses, a respirator, and hearing protec- tion while sanding with this machine. Loose hair and clothing could get caught in machinery and cause serious personal injury.
G0529 Oscillating Spindle & Disc Sander -19- Spindle Sanding Never use the Model G0529 for applica- tions other than those for which it was made. DO NOT overload the machine or use excess force when sanding. Severe personal injury, damage to the machine, or damage to your workpiece could occur.
-20- G0529 Oscillating Spindle & Disc Sander Disc Sanding To perform disc sanding operations: 1. Set the angle of the table relative to the sanding disc. The angle can be set with the angle gauge on the disc sander or with a pro- tractor for greater accuracy.
G0529 Oscillating Spindle & Disc Sander -21- Serious personal injury could occur if you con- nect your machine to the power source during the maintenance process. DO NOT connect the machine to the power source while performing any maintenance on this machine.
-22- G0529 Oscillating Spindle & Disc Sander Maintenance Performed Approximate Hours Of Use Maintenance Log Date.
G0529 Oscillating Spindle & Disc Sander -23- This section contains the following subsections for the Model G0529: aftermarket accessories, data sheets, parts diagrams and list, troubleshoot- ing, and warranty/return information.
-24- G0529 Oscillating Spindle & Disc Sander Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 MACHINE DA T A SHEET Design Type ..........................................................................
G0529 Oscillating Spindle & Disc Sander -25- Parts Diagrams & Lists 67 114 108 107 110 10 107 116 108 107 3 108 119 115 27 101 28 109 104 61 46 29 45 114 63 64 65 112 90 103 11 113 87 40 89 34.
-26- G0529 Oscillating Spindle & Disc Sander Parts Diagrams & Lists 80 81 116 108 82 80 81 83 108 82 83 116 108 82 106 108 125 125 126 126 140 143 142 137.
G0529 Oscillating Spindle & Disc Sander -27- 2 P0529002 BASE UPPER 3 P0529003 FRAME 4 P0529004 SPINDLE 5 P0529005 HELICAL BEVEL GEAR 6 P0529006 PU HELICAL BEVEL GEAR 7 P0529007 RIGHT OIL BOX 8 P05.
-28- G0529 Oscillating Spindle & Disc Sander 124 P0529124 STAND TOP 125 P0529125 RIGHT AND LEFT PANEL 126 P0529126 FRONT/REAR PANEL 127 P6003 BALL BEARING 6003ZZ 129 P0529129 SANDING PAPER 100 GRI.
G0529 Oscillating Spindle & Disc Sander -29- Troubleshooting TROUBLE Grains easily rub off the sleeve or disc . Deep sanding grooves or scars in workpiece. Sanding surface clogs quickly or burns. Glazed sanding surfaces. Motor will not start. Motor will not start; fuses or circuit breakers blow.
-30- G0529 Oscillating Spindle & Disc Sander Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
CUT ALONG DOTTED LINE 9. How many of your woodworking machines are Grizzly? _____________ 10. Which benchtop tools do you own? Check all that apply. ___1" x 42" Belt Sander ___6" - 8&qu.
FOLD ALONG DOTTED LINE FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 Place Stamp Here TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name_____________________________.
.
Buy Direct and Save with Grizzly ® – Trusted, Proven and a Great Value! -OR- • SECURE ORDERING • ORDERS SHIPPED WITHIN 24 HOURS • E-MAIL RESPONSE WITHIN ONE HOUR Visit Our Website T oday And .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Grizzly G0529 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Grizzly G0529 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Grizzly G0529, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Grizzly G0529 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Grizzly G0529, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Grizzly G0529.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Grizzly G0529. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Grizzly G0529 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
