Manuel d'utilisation / d'entretien du produit GA-F2A88XM-HD3 du fabricant Gigabyte
Aller à la page of 36
GA-F2A88XM-HD3 User's Manual Rev . 30 01 1 2ME -F288HD3-300 1R.
Motherboard GA-F2A88XM-HD3 Aug. 23, 2013 Aug. 23, 2013 Motherboard GA-F2A88XM-HD3 Copyright © 2013 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE.
- 3 - T able of Contents GA -F2 A88XM - HD3 Mot herboard L ay out ........................................................................ 4 GA -F2 A88XM - HD3 Mot herboard B lock Diagr am ........................................................... 5 Chapter 1 Hardware Inst allation .
- 4 - GA-F2A88XM- HD3 Mo therboard Lay out The box contents above are for reference only and the actual items shall depend on the product package you obtain.
- 5 - For detailed product information/limitation(s), refer to "1-2 Product Specications." GA- F2A88 XM - HD 3 Mot herboard Block Diagram UMI PCI Bus 1 PCI PCI CLK (33 MHz) COM LPC Bus PS/2 KB/Mouse Dual BIOS 8 USB 2.
- 6 - Chapter 1 Hardware Installation 1- 1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD).
- 7 - 1- 2 P roductSpe cications APU FM2+ Socket: - AMD A series processors - AMD Athlon ™ series processors ( Go to GIGABYTE's website for the latest CPU support list.
- 8 - Storage Interface Chipset: 8 x SA T A 6Gb/s connectors - Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD USB Chipset: - 4 USB 3.0/2.0 ports ( 2 ports on the back panel, 2 ports available through the internal USB header ) - 8 USB 2.
- 9 - 1-3 Installing the APU Read the following guidelines before you begin to install the APU: • Make sure that the motherboard supports the APU. (Go to GIGABYTE's website for the latest APU support list.) • Always turn off the computer and unplug the power cord from the power outlet before installing the APU to prevent hardware damage.
- 10 - 1- 4 Installing the Memor y DualChannelMemoryConguration This motherboard provides two DDR3 memory sockets and supports Dual Channel T echnology. After the memory is installed, the BIOS will automatically detect the specications and capacity of the memory .
- 1 1 - 1- 7 Back Panel Con nec tors USB 2.0/1.1 Port The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices such as a USB keyboard/mouse, USB printer , USB ash drive and etc. PS/2 Keyboard/Mouse Port Use this port to connect a PS/2 mouse or keyboard.
- 12 - RJ-45 LAN Port The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following describes the states of the LAN port LEDs. USB 3.0/2.0 Port The USB 3.0 port supports the USB 3.0 specication and is compatible to the USB 2.
- 13 - 1-8 Internal Connec tors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer .
- 14 - 1/2) A TX_12V/A TX (2x4 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector , the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector , rst make sure the power supply is turned off and all devices are properly installed.
- 15 - 5) SA T A3 0/1/2/3/4/5/6/7 (SA T A 6Gb/s Connectors) The SA T A connectors conform to SA T A 6Gb/s standard and are compatible with SA T A 3Gb/s and SA T A 1.5Gb/s standard. Each SA T A connector supports a single SA T A device. The AMD A88X Chipset supports RAID 0, RAID 1, RAID 5, RAID 10, and JBOD.
- 16 - 7) F_AUDIO(FrontPanel AudioHeader) The front panel audio header supports Intel High Denition audio (HD) and AC'97 audio. Y ou may connect your chassis front panel audio module to this header . Make sure the wire assignments of the module con - nector match the pin assignments of the motherboard header .
- 17 - 10) F_USB1/F_USB2 (USB 2.0/1.1 Headers) The headers conform to USB 2.0/1.1 specication. Each USB header can provide two USB ports via an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer . Pin No.
- 18 - 15) CLR_CMOS(ClearCMOSJumper) Use this jumper to clear the BIOS conguration and reset the CMOS values to factory defaults. T o clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds. • Always turn off your computer before clearing the CMOS values.
- 19 - Chapter2 BIOSSetup • Because BIOS ashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not ash the BIOS. T o ash the BIOS, do it with caution. Inadequate BIOS ashing may result in system malfunction.
- 20 - 2- 2 M.I. T . Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system congurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components.
- 21 - & ExtremeMemoryProle(X.M.P .) (Note 2) Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when enabled. Disabled Disables this function. (Default) Prole1 Uses Prole 1 settings.
- 22 - ` Channel A/B Timing Settings This sub-menu provides memory timing settings for each channel of memory . The respective timing setting screens are congurable only when DRAM Timing Selectable is set to Quick or Expert . Note: Y our system may become unstable or fail to boot after you make changes on the memory timings.
- 23 - & Slope PWM Allows you to control the fan speed. This item is congurable only when CPU Fan Speed Control is set to Manual . Options are: 0.75 PWM value / o C ~ 2.50 PWM value / o C. & System Fan Speed Control (SYS_F AN Connector) Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
- 24 - & Access Level Displays the current access level depending on the type of password protection used. (If no password is set, the default will display as Administrator .) The Administrator level allows you to make changes to all BIOS settings; the User level only allows you to make changes to certain BIOS settings but not all.
- 25 - & SecurityOption Species whether a password is required every time the system boots, or only when you enter BIOS Setup. After conguring this item, set the password(s) under the Administrator Password/User Password item. Setup A password is only required for entering the BIOS Setup program.
- 26 - & Administrator Password Allows you to congure an administrator password. Press <Enter> on this item, type the password, and then press <Enter>. Y ou will be requested to conrm the password. Type the password again and press <Enter>.
- 27 - & OnChipSA T APort4-7T ype(SA T A34~SA T A37connectors) This option is congurable only when OnChip SA T A T ype is set to RAID or AHCI . Congures the operating mode of the integrated SA T A3 4~SAT A3 5 connectors.
- 28 - ` A T A Port Information This section provides information on the device connected to each SA T A port controlled by AMD Chipset. ` SA T A Conguration & PORT0HotPlug~PORT7HotPlug Enables or disable the hot plug capability for each SA T A port.
- 29 - & Resume by Alarm Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Wake up day: Turn on the system at a specic time on each day or on a specic day in a month.
- 30 - & Save & Exit Setup Press <Enter> on this item and select Ye s . This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press <Esc> to return to the BIOS Setup Main Menu. & Exit Without Saving Press <Enter> on this item and select Ye s .
- 31 - Before you begin • At least two SA T A hard drives (to ensure optimal performance, it is recommended that you use two hard drives with identical model and capacity). If you do not want to create RAID, you may prepare only one hard drive. • Windows 8/7/XP (32-bit) setup disk.
- 32 - Example1:CreateaRAID0arraywithDrive0andDrive1andthearraysizeis40GB. rcadm -C -r0 -d 0 1 -s 40000 ( "C" = Create a array , &.
- 33 - InstallingtheSA T A RAID/AHCIDriverandOperatingSystem With the correct BIOS settings, you are ready to install the operating system. A. Installing Windows 8/7 (The following instructions use Windows 8 as the example operating system.
- 34 - 3 - 2 Drivers Installation • Before installing the drivers, rst install the operating system. (The following instructions use Windows 8 as the example operating system.) • After installing the operating system, insert the motherboard driver disk into your optical drive.
- 35 - Regulator y Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted.
- 36 - Conta ct Us GIGA-BYTETECHNOLOGYCO.,L TD. Add res s: No.6, B ao Chi ang Ro ad, Hsi n-Tie n Dist ., New Taipei C ity 2 31 , Taiwan TEL: + 88 6-2- 8912- 40 00 , F A X: +8 86 -2- 8912- 40 05 T ec h. and N on - Tech. Su ppor t (Sa les /Ma rket ing) : htt p://ggt s.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Gigabyte GA-F2A88XM-HD3 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Gigabyte GA-F2A88XM-HD3 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Gigabyte GA-F2A88XM-HD3, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Gigabyte GA-F2A88XM-HD3 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Gigabyte GA-F2A88XM-HD3, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Gigabyte GA-F2A88XM-HD3.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Gigabyte GA-F2A88XM-HD3. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Gigabyte GA-F2A88XM-HD3 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
