Manuel d'utilisation / d'entretien du produit GA-945P-DS3 (REV. 2.0) du fabricant Gigabyte
Aller à la page of 72
GA-945P-DS3/S3 Intel ® Core TM 2 Extreme dual-core / Core TM 2 Duo / Intel ® Pentium ® D / Pentium ® 4 / Celeron ® D LGA775 Processor Motherboard User's Manual Rev.
Motherboard GA-945P-DS3/ GA-945P-S3 Oct. 27, 2006 Oct. 27, 2006 Motherboard GA-945P-DS3/GA-945P-S3.
Copyright © 2007 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in the manual are legally registered to their respective companies.
- 4 - T able of Contents Item Checklist ................................................................................................................. 6 Optional Accessories ..........................................................................
- 5 - Chapter 3 Install Drivers ............................................................................................. 49 3 -1 Install Chipset Drivers .................................................................................... 4 9 3 - 2 Software Applications .
- 6 - Item Checklist IDE Cable x 1 and FDD Cable x 1 SA T A 3Gb/s Cable x 2 I/O Shield * The items listed above are for reference only, and are subject to change without notice. Optional Accessories 2 Ports USB 2.0 Cable (Part Number: 12CR1-1UB030-51/R) 4 Ports USB 2.
- 7 - GA-945P-DS3/GA-945P-S3 Motherboard Layout KB_MS CPU_FAN LGA775 ATX GA-945P-DS3/GA-945P-S3 USB LAN F_AUDIO AUDIO BIOS PCIE_16 PCIE_3 F_USB1 IDE1 PCIE_1 CD_IN CI DDRII1 DDRII2 DDRII3 DDRII4 F_USB2.
- 8 - Block Diagram (Note) To use a DDRII 667 memory module on the motherboard, you must install a 1066/800 MHz FSB processor. Center/Subwoofer Speaker Out Line-Out MIC CPU CLK+/-(266/200/133 MHz) PCI.
Hardware Installation - 9 - English 1-1 Considerations Prior to Installation Preparing Y our Computer The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Thus, prior to installation, please follow the instructions below: 1.
GA-945P-DS3/S3 Motherboard - 1 0 - English 1-2 Feature Summary CPU LGA775 for Intel ® Core TM 2 Extreme dual-core/ Core TM 2 Duo/Pentium ® D/ Pentium ® 4/Celeron ® D L2 cache varies with C.
Hardware Installation - 11 - English Rear Panel I/O 1 PS/2 keyboard port 1 PS/2 mouse port 1 serial port 1 parallel port 4 USB 2.0/1.
GA-945P-DS3/S3 Motherboard - 1 2 - English 1 -3 Installation of the CPU and CPU Cooler Before installing the CPU, please comply with the following conditions: 1. Please make sure that the motherboard supports the CPU. 2. Please take note of the one indented corner of the CPU.
Hardware Installation - 13 - English 1-3-2 Installation of the CPU Cooler The CPU cooler may adhere to the CPU as a result of hardening of the heat paste.T o prevent such an occurrence, it is suggested that either thermal tape rather than heat paste be used for heat dissipation or using extreme care when removing the CPU cooler.
GA-945P-DS3/S3 Motherboard - 1 4 - English The motherboard supports DDRII memory modules, whereby BIOS will automatically detect memory capacity and specifications. Memory modules are designed so that they can be inserted only in one direction. The memory capacity used can differ with each slot.
Hardware Installation - 15 - English Dual Channel Memory Configuration The GA-945P-DS3/S3 supports the Dual Channel T echnology . After operat- ing the Dual Channel T echnology , the bandwidth of memory bus will double.
GA-945P-DS3/S3 Motherboard - 1 6 - English 1 -5 Installation of Expansion Cards Y ou can install your expansion card by following the steps outlined below: 1. Read the related expansion card's instruction document before install the expansion card into the computer.
Hardware Installation - 17 - English 1 - 6 I/O Back Panel Introduction PS/2 Keyboard and PS/2 Mouse Connector T o install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard to the lower port (purple). Parallel Port (LPT) The parallel port allows connection of a printer, scanner and other peripheral devices.
GA-945P-DS3/S3 Motherboard - 1 8 - English 1 -7 Connectors Introduction In addition to the default speakers settings, the ~ audio jacks can be reconfigured to perform different functions via the audio software. Only microphones still MUST be connected to the default Mic In jack ( ) .
Hardware Installation - 19 - English Pin No. Definition 13 3.3V 14 -12V 15 GND 1 6 PS_ON(soft On/Off) 17 GND 18 GND 19 GND 20 -5V 21 +5V 22 +5V 23 +5V (Only for 24-pin A TX) 24 GND(Only for 24-pin ATX) Pin No. Definition 1 3.3V 2 3.3V 3 GND 4 +5V 5 GND 6 +5V 7 GND 8 Power Good 9 5V SB(stand by +5V) 10 +12V 1 1 +12V(Only for 24-pin A TX) 12 3.
GA-945P-DS3/S3 Motherboard - 2 0 - English 3/4/5) CPU_F AN / SYS_FAN / PWR_F AN (Cooler Fan Power Connector) The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin (only for CPU_FAN) power connector and possesses a foolproof connection design.
Hardware Installation - 21 - English 7 ) FDD (Floppy Connector) The FDD connector is used to connect the FDD cable while the other end of the cable connects to the FDD drive. The types of FDD drives supported are: 360 KB, 720 KB, 1.2 MB, 1.44 MB and 2.
GA-945P-DS3/S3 Motherboard - 2 2 - English 9 ) SA T AII0/1/2/3 (SA T A 3Gb/s Connector) SA T A 3Gb/s can provide up to 300MB/s transfer rate. Please refer to the BIOS setting for the Serial A T A and install the proper driver in order to work properly .
Hardware Installation - 23 - English 1 1 ) F_P ANEL (Front Panel Jumper) Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis front panel to the F_P ANEL connector according to the pin assignment below .
GA-945P-DS3/S3 Motherboard - 2 4 - English 1 2 ) F_AUDIO (Front Audio Connector) This connector supports either HD (High Definition) or AC97 front panel audio module. If you wish to use the front audio function, connect the front panel audio module to this connector.
Hardware Installation - 25 - English 1 3) CD_IN (CD IN Connector) Connect CD-ROM or DVD-ROM audio out to the connector. Pin No. Definition 1 CD-L 2 GND 3 GND 4 CD-R 1 4 ) SPDIF_IO (S/PDIF In/Out Connector) The S/PDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby Digital Decoder.
GA-945P-DS3/S3 Motherboard - 2 6 - English 1 1 5 ) F_ USB1 / F_USB2 (Front USB Connector) Be careful with the polarity of the front USB connector. Check the pin assignment carefully while y o u connect the front USB cable, incorrect connection between the cable and connector will make the device unable to work or even damage it.
Hardware Installation - 27 - English Open: Normal Short: Clear CMOS 1 7 ) CLR_CMOS (Clear CMOS) Y ou may clear the CMOS data to its default values by this header . T o clear CMOS, temporarily short the two pins. Default doesn't include the jumper to avoid improper use of this header.
GA-945P-DS3/S3 Motherboard - 2 8 - English.
BIOS Setup - 29 - English CONTROL KEYS < >< >< >< > Move to select item <Enter> Select Item <Esc> Main Menu - Quit and not save changes into CMOS Status Page Setup .
GA-945P-DS3/S3 Motherboard - 3 0 - English The Main Menu (For example: GA-945P-DS3 BIOS V er . F2c) Once you enter Award BIOS CMOS Setup Utility, the Main Menu (as figure below) will appear on the screen. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.
BIOS Setup - 31 - English Standard CMOS Features This setup page includes all the items in standard compatible BIOS. Advanced BIOS Features This setup page includes all the items of Award special enhanced features.
GA-945P-DS3/S3 Motherboard - 3 2 - English 2-1 Standard CMOS Features Date The date format is <week>, <month>, <day>, <year>. Week The week, from Sun to Sat, determined by the BIOS and is display-only Month The month, Jan.
BIOS Setup - 33 - English Capacity Capacity of currently installed hard disk. Cylinder Number of cylinders Head Number of heads Precomp Write precomp Landing Zone Landing zone Sector Number of sectors Drive A The category identifies the types of floppy disk drive A that has been installed in the computer.
GA-945P-DS3/S3 Motherboard - 3 4 - English 2-2 Advanced BIOS Features Hard Disk Boot Priority Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc. Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list.
BIOS Setup - 35 - English HDD S.M.A.R.T. Capability This feature allows your hard disk to report read/write errors and to issue warnings when third- party hardware monitor utility is installed. Enabled Enable HDD S.M.A.R.T. capability. Disabled Disable HDD S.
GA-945P-DS3/S3 Motherboard - 3 6 - English 2 -3 Integrated Peripherals On-Chip Primary PCI IDE Enabled Enable onboard 1st channel IDE port. (Default value) Disabled Disable onboard 1st channel IDE port. On-Chip SA T A Mode Disabled Disable this function.
BIOS Setup - 37 - English USB 2.0 Controller Disable this function if you are not using onboard USB 2.0 feature. Enabled Enable USB 2.0 Controller. (Default value) Disabled Disable USB 2.0 Controller. USB Keyboard Support Enabled Enable USB Keyboard Support.
GA-945P-DS3/S3 Motherboard - 3 8 - English When LAN Cable Is Functioning Normally... If no cable problem is detected on the LAN cable connected to a Gigabit hub or a 10/100 Mbps hub, the following message will appear: Link Detected Displays transmission speed Cable Length Displays the approximate length of the attached LAN cable.
BIOS Setup - 39 - English ECP Mode Use DMA This option is available only when Parallel Port Mode is set to ECP or ECP+EPP. 3 Set ECP Mode Use DMA to 3.
GA-945P-DS3/S3 Motherboard - 4 0 - English If Resume by Alarm is Enabled. Date (of Month) Alarm : Everyday, 1~31 Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59) Power On By Mouse Disabled Disable this function. (Default value) Double Click Double click on PS/2 mouse left button to power on the system.
BIOS Setup - 41 - English 2-5 PnP/PCI Configurations PCI1 IRQ Assignment Auto Auto assign IRQ to PCI 1. (Default value) 3,4,5,7,9,10,1 1,12,14,15 Set IRQ 3,4,5,7,9,10,1 1,12,14,15 to PCI 1. PCI2 IRQ Assignment Auto Auto assign IRQ to PCI 2. (Default value) 3,4,5,7,9,10,1 1,12,14,15 Set IRQ 3,4,5,7,9,10,1 1,12,14,15 to PCI 2.
GA-945P-DS3/S3 Motherboard - 4 2 - English 2-6 PC Health Status Reset Case Open Status Disabled Don't reset case open status. (Default value) Enabled Clear case open status at next boot. Case Opened If the case is closed, "Case Opened" will show "No".
BIOS Setup - 43 - English CPU Smart F AN Control Disabled Disable this function. Enabled When this function is enabled, CPU fan will run at different speed depending on CPU temperature. Users can adjust the fan speed with Easy Tune based on their requirements.
GA-945P-DS3/S3 Motherboard - 4 4 - English 2-7 MB Intelligent T weaker(M.I.T .) Incorrectly using these features may result in system instability or corruption. Doing a overclock or overvoltage on CPU, chipsets and memory modules may result in damages or shortened life expectancy to these components.
BIOS Setup - 45 - English O.C. FSB1333 Core. 2 CPU Enable use of a Core TM 2 CPU with 1333 MHz FSB through overclocking. T o enable this feature, you must install DDRII 533 memory module(s) and a Core TM 2 CPU. Disabled Disable the use of a Core TM 2 CPU (1333 MHz FSB).
GA-945P-DS3/S3 Motherboard - 4 6 - English 2 -8 Load Fail-Safe Defaults Fail-Safe defaults contain the most appropriate values of the system parameters that allow minimum system performance. 2 -9 Load Optimized Defaults Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automatically detects.
BIOS Setup - 47 - English 2-10 Set Supervisor/User Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. T ype the password, up to eight characters, and press <Enter>.
GA-945P-DS3/S3 Motherboard - 4 8 - English 2 - 1 1 Save & Exit Setup T ype "Y" will quit the Setup Utility and save the user setup value to RTC CMOS. T ype "N" will return to Setup Utility . 2-12 Exit Without Saving T ype "Y" will quit the Setup Utility without saving to RTC CMOS.
Install Drivers - 49 - English Chapter 3 Install Drivers Pictures below are shown in Windows XP. Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the Run.
GA-945P-DS3/S3 Motherboard - 5 0 - English 3-2 S oftwar e Appli cations This page displays all the tools that Gigabyte developed and some free software, you can choose anyone you want and press "install" to install them. 3-3 Dr iver CD Inf ormation This page lists the contents of software and drivers in this CD-title.
Install Drivers - 51 - English 3-4 Har dware In form ation This page lists all device you have for this motherboard. 3-5 Contac t Us Please see the last page for details.
GA-945P-DS3/S3 Motherboard - 5 2 - English.
Appendix - 53 - English Chapter 4 Appendix 4-1 Unique Software Utilities (Not all model support these Unique Software Utilities, please check your MB features.) 4-1-1 EasyT une 5 Introduction EasyT une 5 presents the most convenient Windows based system performance enhancement and manageability utility.
GA-945P-DS3/S3 Motherboard . . . . - 54 - English 4-1-2 Xpress Recovery 2 Introduction Xpress Recovery2 is designed to provide quick backup and restora- tion of hard disk data.
Appendix - 55 - English 1. RESTORE: Restore the backed-up data t o your hard disk. (This button will not appear if there is no backup file.) 2. BACKUP: Back up data from hard dis k. 3. REMO VE: Remove previously-created backup file s to rel ease disk spac e.
GA-945P-DS3/S3 Motherboard . . . . - 56 - English 4-1-3 Fla sh BIOS Method Introduction Before Use: Foll ow the s teps bel ow before usin g Q-F lash to updat e BIO S: 1 . From GIGABYTE 's website, dow nload the latest co mpresse d BIOS upd ate file that matches yo ur mother board m odel.
Appendix - 57 - English Step 2: The process of system reading the BIOS file from the floppy disk is displayed on the screen. When the message "Are you sure to update BIOS?" appears, press ENTER. The BIOS update will begin and the current process will be displayed.
GA-945P-DS3/S3 Motherboard . . . . - 58 - English Method 2 : @BIOS TM Utility If you do not have a DOS startup disk, we recommend that you use the new @BIOS utility. @BIOS allows users to update their BIOS under Windows. Just select the desired @BIOS server to download the latest version of BIOS.
Appendix - 59 - English III. Save BIOS In the very beginning, there is "Save Current BIOS" icon shown in dialog box. It means to save the current BIOS version. IV. Check out supported motherboard and Flash ROM: In the very beginning, there is "About this program" icon shown in dialog box.
GA-945P-DS3/S3 Motherboard . . . . - 60 - English 4-1-4 2- / 4- / 6- / 8- Channel Audio Function Introduction STEP 1 : After installation of the audio driver, you should find an Audio Manager icon in your system tray (you can also find the icon in Control Panel).
Appendix - 61 - English STEP 3: After a speaker or headphone is plugged into the rear Line Out jack, a small window will pop up and ask you what type of equipment is connected. Choose Headphone or Line Out depending on the device connected and click OK .
GA-945P-DS3/S3 Motherboard . . . . - 62 - English 6 Channel Audio Setup STEP 1 : After installation of the audio driver, you should find an Audio Manager icon in your system tray (you can also find the icon in Control Panel). Double- click the icon to open the Audio Control Panel.
Appendix - 63 - English STEP 2: In the Audio Control Panel, click the Audio I/O tab. In the upper left list, click 8CH Speaker . STEP 3: After plugging in 8-channel speakers to the rear speaker jacks, a small window will pop up and ask you what type of equipment is connected.
GA-945P-DS3/S3 Motherboard . . . . - 64 - English Sound Effect Configuration: At the Sound Effect menu, users can adjust sound option settings as desired. AC'97 Audio Configuration: T o enable the front panel audio connector to sup- port AC97 Audio mode, go to the Audio Control Panel and click the Audio I/O tab.
Appendix - 65 - English 4-2 T roubleshooting Below is a collection of general asked questions. T o check general asked questions based on a specific motherboard model, please log on to http://www.gigabyte.com.tw Question 1: I cannot see some options that were included in previous BIOS after updating BIOS.
GA-945P-DS3/S3 Motherboard . . . . - 66 - English.
Appendix - 67 - English.
GA-945P-DS3/S3 Motherboard . . . . - 68 - English.
Appendix - 69 - English.
GA-945P-DS3/S3 Motherboard . . . . - 70 - English Contact Us y y y y y T aiwan (Headquarters) GIGA-BYTE TECHNOLOGY CO., L TD. Address: No.6, Bau Chiang Road, Hsin-Tien, T aipei 231, T aiwan TEL: +886-2-8912-4888 FAX: +886-2-8912-4003 T ech. and Non-T ech.
Appendix - 71 - English y y y y y Germany G.B.T. TECHNOLOGY TRADING GMBH WEB address : http://www.gigabyte.de y y y y y U.K. G.B.T . TECH. CO., L TD. WEB address : http://www.giga-byte.co.uk y y y y y The Netherlands GIGA-BYTE TECHNOLOGY B.V. WEB address : http://www.
- 72 -.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Gigabyte GA-945P-DS3 (REV. 2.0) c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Gigabyte GA-945P-DS3 (REV. 2.0) - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Gigabyte GA-945P-DS3 (REV. 2.0), vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Gigabyte GA-945P-DS3 (REV. 2.0) va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Gigabyte GA-945P-DS3 (REV. 2.0), mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Gigabyte GA-945P-DS3 (REV. 2.0).
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Gigabyte GA-945P-DS3 (REV. 2.0). Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Gigabyte GA-945P-DS3 (REV. 2.0) ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.