Manuel d'utilisation / d'entretien du produit EXT-HDMI-CAT5-444 du fabricant Gefen
Aller à la page of 25
www .gefen.com f 4x4 HDMI Over CA T -5 Matrix EXT -HDMI-CA T5-444 User Manual.
T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday . Write T o: Gefen Inc. c/o Customer Service 20600 Nordhoff St Chatsworth, CA 9131 1 www .gefen.com support@gefen.
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Panel Layout 5 Sender Panel Descriptions 8 Receiver Panel Layout 9 Receiver Panel Descriptions 10 RMT -4IR Remote Description 1 1 Connecti.
1 Congratulations on your purchase of the 4x4 HDMI Over CA T5 Matrix. Y our com- plete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies.
READ THESE NOTES BEFORE INST ALLING OR OPERA TING THE 4X4 HDMI OVER CA T5 MA TRIX • T o use the extender functionality of the 4x4 HDMI Over CA T5 Matrix the supplied 1 foot HDMI jumper cables must be used to connect the HDMI output ports to the HDMI extension input ports.
3 Features • Switches easily between any four HDMI sources • Sends up to four video inputs to any four remote HDMI displays • Maintains 1920 x 1200, 1080p, and 2k resolution video • Extends vi.
4 Front Panel Back Panel 1 81 1 1 4 1 7 9 21 22 23 24 5 6 7 25 26 27 28 29 12 15 18 10 13 16 19 20 234 SENDER P ANEL LA YOUT.
5 SENDER P ANEL DESCRIPTIONS 1 Selected Source LED For HDMI Output 1 The selected source for HDMI Output 1 will be indicated by an active LED. 2 Selected Source LED For HDMI Output 2 The selected source for HDMI Output 2 will be indicated by an active LED.
6 SENDER P ANEL DESCRIPTIONS 14 HDMI Output 3 CA T5 Extension Ports DDC and video output ports for extension to remote receiver . Both cables must be connected for proper operation. 15 HDMI 3 Extension Input Port For proper extension, the supplied 1 foot HDMI jumper cable must be attached between this port (12) and HDMI Output Port 2 (24).
7 SENDER P ANEL DESCRIPTIONS 26 HDMI Output 2 Connect a display to this output port. If using the built-in extension functionality , connect this output port (23) to the HDMI 2 extension input port (9) using the supplied 1 foot HDMI jumper cable. 27 HDMI Output 3 Connect a display to this output port.
8 Front Panel Back Panel T op Panel 6 10 3 1 57 8 9 24 RECEIVER P ANEL LA YOUT.
9 RECEIVER P ANEL DESCRIPTIONS 1 IR Relay Receiver This receiver will receive commands from the included IR remote control and from other commercial IR remote controls and relay it back to the optional IR blaster . This is intended for remote control of devices connected to the 4x4 HDMI Over CA T5 Matrix from the extended location.
10 Pressing on each numbered selection buttons will switch the receiver to the corresponding HDMI Input source. The LED will blink each time a button press is detected. Removing the battery cover will reveal the internal Dip Switches that relate to the IR Code Channel.
11 How to Connect the 4x4 HDMI Over CA T5 Matrix 1. Connect your sources (up to four) to the 4x4 HDMI Over CA T5 Matrix using the supplied HDMI cables. 2. If using the extension functionality of the 4x4 HDMI Over CA T5 Matrix, please connect the HDMI output ports to the HDMI extension input ports using the supplied 1 foot jumper cables.
12 4X4 HDMI OVER CA T5 MA TRIX JUMPER DIAGRAM The 4x4 HDMI Over CA T5 Matrix uses a jumper cable system to link the matrix and extension portions together . These jumper cables are included. Please us the diagram below to setup extension functionality of the 4x4 HDMI Over CA T5 Matrix.
13 OPERA TING THE 4X4 HDMI OVER CA T5 RECEIVER T o use the 4x4 HDMI Over CA T5 Receiver , the following connections must be made: 1. A HDMI jumper cable is connected between the HDMI output port and the HDMI extension input port.
14 The 4x4 HDMI Over CA T5 Receiver contains a bank of 8 DIP SWITCHES. These swiches are located underneath each unit. Peeling back the black metallic sticker on the bottom of the 4x4 HDMI Over CA T5 Receiver will reveal the DIP SWITCH bank. These service switches are used for a number of con fi guration options.
15 1. Insert a small fl at head tool into the trim pot on the receiver unit. 2. T urn the trim pot in a clockwise fashion until it comes to a stop. Do not force the trim pot beyond this point.
16 CONFIGURING THE 4X4 HDMI OVER CA T5 RECEIVER Pre-Emphasis Pre-Emphasis is used to help extend a signal travel over a distance of cable. When a HDMI cable connected to a display on a 4x4 HDMI Over CA T5 is over a long cable, it is recommended that Pre-Emphasis be enabled.
12345678 Gefen has speci fi cally engineered their products to work with the TIA/EIA-568-B speci fi cation. Please adhere to the table below when fi eld terminating cable for use with Gefen products. Failure to do so may produce unexpected results and reduced performance.
EDID MANAGEMENT FEA TURES 18 EDID. What is it and what is it used for? Under normal circumstances, a source device (digital and analog) will require information about a connected device/display to assess what resolutions and features are available.
19 EDID MANAGEMENT MODES EDID Modes The diagram below illustrates the 8 DIP switch bank. DIP SWITCH Function 1 EDID Mode 2 EDID Mode 3 IR Channel 4 IR Channel 5 EDID Mode 6 N/A 7 EDID Mode 8 N/A Use DIP switches 1, 2, 5, and 7 to select the desired EDID management mode.
20 RS-232 SERIAL COMMUNICA TION What features are available via the RS-232 serial communications port? The 4x4 Matrix for HDMI can accept commands through the RS-232 serial communications port located on the rear panel. The current RS-232 control features are: • Switching/routing of inputs to outputs without the RMT -16IR remote control.
21 RS-232 SERIAL COMMUNICA TION COMMANDS Switching/Routing Binary T able ASCII Corresponding RMT16-IR Button Binary ASCII Corresponding RMT16-IR Button Binary 1 1 001 1 0001 9 9 001 1 1001 2 2 001 1 0.
22 Video Ampli fi er Bandwidth ....................................................................... 165 MHz Input Video Signal .............................................................................. 1.2 V olts p-p Input DDC Signal .........
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Gefen EXT-HDMI-CAT5-444 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Gefen EXT-HDMI-CAT5-444 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Gefen EXT-HDMI-CAT5-444, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Gefen EXT-HDMI-CAT5-444 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Gefen EXT-HDMI-CAT5-444, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Gefen EXT-HDMI-CAT5-444.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Gefen EXT-HDMI-CAT5-444. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Gefen EXT-HDMI-CAT5-444 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
