Manuel d'utilisation / d'entretien du produit 49-8941 du fabricant GE
Aller à la page of 60
GE Appliances GE Answer Center ® 800.626.2000 Part No. 164D3333P171 Pub. No. 49-8941 11-98 CG JBP48 (coil) JBP79 (glass) Owner’ s Manual Ranges Self-Cleaning Electric.
Congratulations! Y ou Are Now Part of the GE Family . Welcome to the GE family. We’re proud of our quality products and we are committed to providing dependable service. You’ll see it in this easy-to-use Owner’s Manual and you’ll hear it in the friendly voices of our customer service department.
GE & Y ou, A Service Partnership. Inside you will find many helpful hints on how to use and maintain your range properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your range.
All ranges can tip and injury could result. T o prevent accidental tipping of the range, attach it to the wall and floor by installing the Anti-T ip device supplied. T o check if the device is installed and engaged properly , remove the storage drawer and inspect the rear leveling leg.
Use this appliance only for its intended purpose as described in this Owner’ s Manual. When using electrical appliances, basic safety precautions should be followed, including the following: ■ Be sure your appliance is properly installed and grounded by a qualified technician in accordance with the provided installation instructions.
■ Use only dry pot holders—moist or damp pot holders on hot surfaces may result in burns from steam. Do not let pot holders touch hot surface units or heating elements. Do not use a towel or other bulky cloth. ■ For your safety, never use your appliance for warming or heating the room.
7 T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information ■ Do not touch the surface units, the heating elements or the interior surface of the oven. These surfaces may be hot enough to burn even though they are dark in color.
■ Stand away from the range when opening the oven door. Hot air or steam which escapes can cause burns to hands, face and/or eyes. ■ Do not heat unopened food containers. Pressure could build up and the container could burst, causing an injury. ■ Keep the oven vent unobstructed.
9 T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information ■ Do not clean the door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket. ■ Clean only parts listed in this Owner’s Manual.
IMPORT ANT SAFETY INFORMA TION. READ ALL INSTRUCTIONS BEFORE USING. 10 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Use proper pan size—select cookware having flat bottoms large enough to cover the surface unit heating element.
T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information ■ Clean the cooktop with caution. If a wet sponge is used to wipe spills on a hot cooktop, be careful to avoid steam burns. ■ Keep an eye on foods being fried at high or medium high heat settings.
■ Use care when touching the cooktop. The glass surface of the cooktop will retain heat after the controls have been turned off. ■ When the cooktop is cool, use only the recommended cleaning cream to clean the cooktop. ■ To avoid possible damage to the cooking surface, do not apply cleaning cream to the glass surface when it is hot.
13 Using the surface units. T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information How to Set Push the knob in and turn in either direction to the setting you want. At both OFF and HI the control clicks into position.
Using the surface units. Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Indicator Lights (glass cooktops only) A HOT COOKTOP indicator light will glow when any radiant element is turned on, and will remain on until the surface is cool enough to touch.
T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Selecting types of cookware. (glass cooktops only) The following information will help you choose cookware which will give good performance. Stainless Steel: recommended Aluminum: heavy weight recommended Good conductivity.
Using the oven controls. 16 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Throughout this manual, features and appearance may vary from your model.
Oven Control Settings + and – Pads These pads allow you to set times up to 9 hours and 59 minutes. Short taps to these pads change the time or temperature by small amounts. Press and hold the pad to change the time or temperature by larger amounts. CLEAR/OFF Pad Press this pad to cancel ALL oven operations except the clock and timer.
Special features of your oven control. 18 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service 12 Hour Shut-Off With this feature, should you for.
19 T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Control Lockout Y our control will allow you to lock down the touch pads so they cannot be activated when pressed. Press the BAKE and BROIL HI/LO pads at the same time for 2 seconds until the display shows “SF.
20 Special features of your oven control. Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service 12 Hour , 24 Hour or Clock Black-Out Y our control is set to use a 12 hour clock. If you would prefer to have a 24 hour military time clock or black-out the clock display, follow the steps below.
21 T roubleshooting T ips Installation Instructions GE Customer Service Operating Instructions Safety Information Changing the Speed of the + or – Pads As you use the + or – pads when setting a time or temperature, you may notice the display changes slowly .
T o avoid possible burns, place the shelves in the desired position before you turn the oven on. Before you begin… The shelves have stop-locks, so that when placed correctly on the supports, they will stop before coming completely out, and will not tilt.
23 T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Aluminum Foil Never entirely cover a shelf with aluminum foil.
Broiling guide. 24 Quantity and/ Shelf First Side Second Side Food or Thickness Position T ime (min.) T ime (min.) Comments Bacon 1/2 lb. (about C 4 1 ⁄ 2 4 1 ⁄ 2 Arrange in single layer . 8 thin slices) Ground Beef 1 lb. (4 patties) C 10 7 Space evenly .
Using the clock and timer . T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information The clock must be set for the automatic oven timing functions to work properly. The time of day cannot be changed during a timed baking or self-cleaning cycle.
Using the timed baking and roasting features. 26 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Do not latch the oven door during timed cooking.
T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information How to Set a Delay Start and Automatic Stop Make sure the oven clock shows the correct time of day . Press the BAKE pad. Using the + or – pad, enter the desired temperature.
Adjust the oven thermostat—Do it yourself! 28 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Y ou may find that your new oven cooks differently than the one it replaced. Use your new oven for a few weeks to become more familiar with it.
Using the self-cleaning oven. T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Never force the latch handle. Forcing the handle will damage the door lock mechanism. Wipe up heavy soil on the oven bottom.
Using the self-cleaning oven. Never force the latch handle. Forcing the handle will damage the door lock mechanism. 30 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service How to Set the Oven for Cleaning Latch the door.
T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information How to Delay the Start of Cleaning Latch the door. Press the SELF CLEAN pad. Using the + or – pad, enter the desired clean time. Press the ST ART TIME pad.
Care and cleaning of the range. 32 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service If your range is removed for cleaning, servicing or any reason, be sure the anti-tip device is re-engaged properly when the range is replaced.
33 T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Painted surfaces include the sides and the drawer front. Clean these with soap and water or a vinegar and water solution. Do not use commercial oven cleaners, cleaning powders, steel wool or harsh abrasives on any painted surface.
Care and cleaning of the range. 34 Lift-Off Oven Door The oven door is removable for cleaning. Do not lift the door by the handle. T o remove the door , open it to the special stop position. Grasp firmly on each side and lift the door straight up and off the hinges.
T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information 35 Oven Heating Elements Do not clean the bake element or the broil element. Any soil will burn off when the elements are heated. To clean the oven floor, gently lift the bake element.
Be sure all surface units are turned off before raising the cooktop. Care and cleaning of the range. 36 Lift-Up Cooktop (electric coil models only) Some models have a cooktop that can be lifted up for easier cleaning. The entire cooktop may be lifted up and supported in the up position.
Be sure all the controls are turned to OFF and the surface units are cool before attempting to remove them. Surface Units (electric coil models only) To clean the surface units, turn the control to the highest setting for a minute. The coils will burn off any soil.
Cooktop Surface Light When changing a cooktop light, do not touch the metal at the ends of the light. The cooktop light is easily replaced with a fluorescent tube of the same wattage. Before changing the light, pull the plug to the range or disconnect the power at the main fuse or circuit breaker panel.
39 Broiler Pan & Grid After broiling, remove the broiler pan from the oven. Remove the grid from the pan. Carefully pour out the grease from the pan into a proper container. Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad.
Cleaning the glass cooktop. 40 Clean the glass surface with cleaning cream before you use the cooktop for the first time. Also, clean the glass surface after each use. This helps protect the top and makes clean-up easier . T o clean the cooktop seal, let a wet cloth rest on it for a few minutes, then wipe clean.
41 T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Special Care Be sure to use a new sharp razor scraper .
Installation of the range. 42 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Read these instructions completely and carefully . Before Y ou Begin IMPORT ANT : Save these instructions for the local electrical inspector’ s use.
T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Prepare the Opening Allow 1 1 ⁄ 2 ″ spacing from the range to adjacent vertical walls above cooktop surface.
Installation of the range. 44 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Read these instructions completely and carefully . Flooring Under the Range Y our range, like many other household items, is heavy and can settle into soft floor coverings such as cushioned vinyl or carpeting.
45 T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Power Cord Strain Relief Installation Remove the lower rear range wiring cover to expose the connector block and bracket. Remove the knockout ring (1 3 ⁄ 8 ″ ) located on bracket directly below the connector.
Installation of the range. 46 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Read these instructions completely and carefully .
47 T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information 4-Wire Power Cord Installation W ARNING: The neutral wire of the supply circuit is connected to the neutral terminal located in the center of the connector block.
Installation of the range. 48 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Read these instructions completely and carefully . 3-Wire Conduit Installation Remove the 3 screws from the connector block.
49 T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information 4-Wire Conduit Installation Remove the 3 screws from the connector block. Remove the grounding strap from the connector block middle location and the screw connecting it to the frame of the range.
Installation of the range. 50 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Read these instructions completely and carefully . Anti-T ip Bracket Installation An Anti-T ip bracket is supplied with instructions for installation in a variety of locations.
Before you call for service… T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information T roubleshooting T ips Save time and money! Review the charts on the following pages first and you may not need to call for service.
Before you call for service… T roubleshooting T ips Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Problem Possible Causes What T o Do Electric Coil Models Surface units The surface units are • With the controls off, check not functioning not plugged in solidly.
T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Problem Possible Causes What T o Do Oven will not work Plug on range is not • Make sure electrical plug is completely inserted in plugged into a live, properly the electrical outlet.
Before you call for service… 54 T roubleshooting T ips Problem Possible Causes What T o Do Food does not bake Oven controls • See the Using the or roast properly improperly set. oven section. Shelf position is • See the Using the incorrect or the oven section.
55 Problem Possible Causes What T o Do Oven will not The oven temperature • Allow the range to cool to self-clean is too high to set a room temperature and self-clean operation. reset the controls. Oven controls • See Using the self-cleaning improperly set.
Before you call for service… 56 T roubleshooting T ips Problem Possible Causes What T o Do Excessive smoking Excessive soil. • Press the CLEAR/OFF pad. Open the windows to rid the room of smoke. Wait until the LOCKED DOOR light goes off. Wipe up the excess soil and reset the clean cycle.
57 General Electric Company Warranty Registration Department P.O. Box 34070 Louisville, KY 40232-4070 GE Service Protection Plus ™ GE, a name recognized worldwide for quality and dependability, offe.
Consumer Product Ownership Registration Model Number Serial Number Important Mail Today! GE Appliances General Electric Company Louisville, Kentucky 40225 First Name Mr. ■ ■ Ms. ■ ■ Mrs. ■ ■ Miss ■ ■ Street Address City State Date Placed In Use Month Day Year Zip Code Apt.
T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information GE Electric Range W arranty All warranty service provided by our Factory Service Centers, or an authorized Customer Care ® technician. For service, call 800-GE-CARES.
Printed in Louisville, KY Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Service T elephone Numbers. The GE Answer Center ® is open 24 hours a day, 7 days a week. GE Answer Center ® 800.626.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté GE 49-8941 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du GE 49-8941 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation GE 49-8941, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le GE 49-8941 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le GE 49-8941, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du GE 49-8941.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le GE 49-8941. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei GE 49-8941 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
