Manuel d'utilisation / d'entretien du produit D5200 du fabricant Fujitsu
Aller à la page of 53
i ESPRIMO D5200 User’s Manual Fujitsu endeavours to ensure that the information in this document is correct, but accepts no liability for any error or omission. Any procedures described in this document for operating Fujitsu products should be read and understood by the operator before such products are used.
ii IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions carefully. Save these instructions for future reference. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
iii 13. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the product. c. If the product has been exposed to rain or water.
iv Before Reading this Manual This section describes safety precautions and convention used in this manual. Be sure to read this. For Safe Operation This manual contains important information for using the ESPRIMO personal computer. Read this manual thoroughly before using your PC.
v Microsoft Service Pack Microsoft Corp. offers Service Pack to provide the users of Microsoft ® Windows ® with more stable system operation (http://www.microsoft.com/). The latest version of the Service Pack helps you configure the most stable system using Microsoft ® Windows ® provided at that time by Microsoft Corp.
vi 6. Modification and reverse engineering You may not modify the Software or reverse engineer the Software by decompiling or disassembling. shall the third party or developer warrant the Software. 7. High level of safety The Software is designed for general use, i.
vii Conventions Used in this Manual Introduction This manual tells you how to put your PC into operation and how to operate it in daily use. Depending on the configuration level chosen some of the hardware components described may not be available on your PC.
viii Important Notes In this chapter you will find information regarding safety which is essential to take note of when working with your PC. The manufacturer's notes contain helpful information on your PC.
ix FCC Class B Compliance Statement The following statement applies to the products covered in this manual, unless otherwise specified herein. The statement for other products will appear in the accompanying documentation.
x Transporting the PC CAUTION Transport all parts separately in their original packaging or in a packaging which protects them from knocks and jolts, to the new site.
xi Disposal and recycling Disposal of the PC unit Disposal of the PC unit (including accessories except the LCD unit) is controlled by the Waste Disposal and Public Cleaning Law. To institutional and corporate customers Personal computers must be disposed off as industrial waste.
xii WARNING • Before mounting or dismounting an optional unit in/from your PC, switch off the PC and all connected units. Unplug all power cords from respective outlets to prevent electric shock and unplug all data communication cables from the respective outlets.
xiii Before Reading This Manual Chapter 1 Preparing for Use This chapter provides the names and functions of individual parts. Chapter 2 Operation This section describes the location of installation and installation of the computer. Chapter 3 Troubleshooting and Tips This chapter provides the basic information on the PC and operation.
xiv Contents CHAPTER 1 Preparing for Use Preparing for Use .............................................................................. 1 Unpacking and Chec king the Deliver y ............................................................. 1 Steps f or Initial Setup .
1 Chapter 1 - Preparing for Use CAUTION Please take note of the safety information in the "Important notes" chapter. ■ Unpacking and Checking the Delivery It is recommended not to throw away the original packaging material! It may be required for reshipment at some later date.
2 ■ Setting Up the PC CAUTION When installing your PC, give consideration to the recommendations and safety notes. Set up the PC only in its correct orientation. The points to observe are illustrated on the following pages. Do not expose the PC to extreme environmental conditions and protect it from dust, humidity and heat.
3 Vertical positioning When this personal computer is vertically installed away from a wall, install the feet with the following steps. 1 Align the feet to the width of the main unit of the personal computer. 2 Install the feet on the main unit of the personal computer.
4 Horizontal positioning 1 Disassemble the foot. 2 Place the main unit of the personal computer on the disassembled foot. D5200_1(01-10) 12/7/06, 10:58 am 4.
5 POINT For vertical installation, the main unit of the personal computer can be installed by fitting the five rubbers attached to the four corners and center of the main unit of the personal computers. When installing rubbers, secure them in the positions where the foot does not touch when it is vertically installed.
6 ■ Connect the Monitor, Mouse and Keyboard The ports for monitor, mouse and keyboard are on the rear and on the front of the system unit. PS/2 keyboard port / purple PS/2 mouse port / green Monitor port / blue USB port / black Connecting the keyboard Connecting standard keyboard Use the supplied keyboard cable only.
7 ■ Initial Switch-on: Software will be Installed If the PC is connected to a network, the network protocol is required as well as the user and server details. Contact your network administrator if you have any questions about these settings. When you switch on your PC for the first time, the supplied software is installed and configured.
8 ■ Connecting External Devices CAUTION Do not connect or disconnect cables during a thunderstorm. Always take hold of the actual plug. Never unplug a cable by pulling the cable itself. Connect and disconnect the cables in the order described below.
9 Connections on the system unit The ports for external devices are on the rear and on the front of the system unit. The ports available on your PC depend on the configuration level you have selected. The standard ports are marked with the symbols shown below (or similar).
10 Connecting external devices to the serial port External devices can be connected to the serial port (e.g. a modem). ● Connect the data cable to the external device. ● Connect the data cable to the serial port . For an exact description of how to connect external devices to the serial port , please refer to the device documentation.
11 Chapter 2 - Operation Switching On the PC ● If necessary, switch the monitor on (see the operating manual for the monitor). ● Switch the PC on with the main power switch on the rear of the PC. ● Press the ON/OFF switch on the front of the PC.
12 ■ Front Panels of the Main Unit of the Personal Computer 1 Vent On the top of the computer there is an opening through which heat is forcibly discharged from the computer. Note that the vent must not be blocked by objects. When placed horizontally, position the computer at a location where the vent is more than 20 cm away from the wall.
13 4 Disc access indicator Lights up when data is being written to the hard disk, or when data are read from the hard disk/ Optical drive or when an audio CD is played. Some optical drives may light up when access is made to the a CD. 5 USB ports Used to connect USB peripherals to your computer.
14 ■ Back Panel of the Main Unit of the Personal Computer 1 Power Outlet Used to connect the power cable to the monitor. 2 Power Inlet Used to connect the power cable. 3 Key hole for a padlock Install a commercially available key. 4 Half-Height expansion card slot Insert the expansion card to expand the functions of the personal computer.
15 6 Main switch Turn "Off" when completely turning off the power to the main unit of the computer. The " | " side is "On" and the "O" side is "Off". If it is set to "Off", the main unit of the personal computer is not powered on even when pressing the power supply button.
16 ■ Keyboard 1 Esc key Pressing this key cancels the operation the application program is executing. 2 F keys These F keys are assigned specific functions for each application. 3 Back space key Press the Back Space key to move the cursor to the left while deleting characters.
17 9 Ctrl key Use the Ctrl key in combination with another key. Its function varies with each application. 10 Windows key Press the Windows key to display the Start menu. 11 Alt key Use the Ctrl key in combination with another key. Its function varies with each application.
18 Floppy Disks Note: Applicable only for units bundled with Slim Optical or Slim Floppy Drive Combo. Working with Floppy Disks Follow the instructions supplied by the vendor of the floppy disks. Never clean the floppy disk drives with cleaning disks.
19 ■ Anti-theft Protection and Lead-sealing There are three ways to protect your PC from theft: ● With the Kensington Lock device (1) and with a Kensington MicroSaver ● With a chain (lead-seal) ● With a (pad)lock To prevent unauthorised persons from opening the casing, the casing can be sealed.
20 Chapter 3 - Troubleshooting and Tips CAUTION Take note of the safety notes and in the "Preparing for use" chapter, when you connect or disconnect cables.
21 The screen stays blank If your screen remains blank this may be due to the following: Monitor is switched off ● Switch your monitor on. Power saving has been activated (screen is blank) ● Press any key on the keyboard. or ● Deactivate the screen saver.
22 Wrong monitor has been set under Window XP ● Restart the PC. ● Press [ F8 ] while the system is booting. Either the Windows Advanced Start Options menu or the menu for selecting the operating system appears. ● If the menu for selecting the operating system appears, press [ F8 ].
23 ■ Time and/or Date is not Correct You can set the time and date in the BIOS Setup or in the operating system. ● Set the time and date. If the time and date are repeatedly wrong when you switch on your PC, the on-board battery is flat. CAUTION. Do not touch the on-board battery.
24 Chapter 4 - System Expansion CAUTION It may be necessary to update the BIOS when carrying out a system expansion or hardware upgrade. When installing components that heats up easily, make sure that the maximum permissible temperatures of the individual components are not exceeded.
25 ■ Before Connecting Peripheral Devices Your computer can be expanded by connecting or incorporating various peripheral devices. WARNING When connecting peripheral devices to your computer, do not connect devices other than Fujitsu recommended products.
26 ● Do not disassemble the power unit. The power unit is a box-shaped device located at the rear of the internal main unit of the personal computer. ● Precautions on handling internal cables or devices Do not scratch or machine internal cables or devices.
27 ■ Removing the Main Unit Cover When connecting peripheral devices, remove the upper cover so that the internal of the computer is exposed. How to remove the main unit cover When the foot is i.
28 ■ Installing Memory POINT When installing memory after the purchase, turn off your computer once after the setup of Windows, then install memory. WARNING Before installing or removing memory, turn off the computer and connected devices, and unplug the computer.
29 Locations for memory to be installed To install memory, insert it into the memory slot of the main unit of the personal computer. Memory to be installed When installing additional memory, use Fujitsu recommended parts only.
30 Installing memory IMPORTANT Hold the edge of the memory as shown in the following figure. Be sure not to touch the areas (pins) with the indication of golden lines. When installing or removing memory, take care so that the memory does not touch auxiliary fittings.
31 5 Open the hooks on the both sides of the slot outward. 6 Insert the slot into the memory. Align the notch of the memory to the notch of the slot, and vertically insert the memory into the slot. When the memory is correctly inserted, the hooks on the both sides of the slot are raised.
32 7 Install the upper cover. 8 Connect power plugs, LAN and modular cables. POINT When removing the memory, refer to installing Steps. Store the removed memory in a safe place. Note that the hooks on the both sides of the slot should not be strongly forced opened.
33 ■ Installing the Expansion Card POINT Shut off your computer after the initial Windows setup before proceeding to installing expansion card. WARNING Before installing or removing expansion cards, turn off the computer and connected devices, and unplug the computer.
34 Locations for expansion cards to be installed To install an expansion card, insert it into the expansion card slot of the main unit of the personal computer. 1 Slide the lock buttons on the both sides of the main unit of the personal computer to the front of it and remove the upper cover.
35 Installing expansion cards 1 Unplug your computer. 2 Remove power plugs, LAN and modular cables from respective outlet. 3 Remove the upper cover.
36 POINT Store the removed slot cover in a safe place. When using an expansion card after removed, install so that dust does not enter the internal personal computer. 7 Insert the expansion card into the port. Firmly insert the expansion card into the port and secure it by returning the lock raised in Step 4.
37 Electrical Data Rated voltage range: (selectable) Frequency: Max. rated current • Casing Dimensions Width/ depth/ height: Weight with the basic configuration Environmental conditions Environment class 3K2 Environment class 2K2 Temperature: • Operating (3K2) • Transport (2K2) Condensation in operating must be avoided.
38 *1 : Some application may show the other name of this processor. *2 : The capacity of the disk provided in this manual is calculated by that 1 MB=1000 x 1000 bytes and 1 GB=1000 x 1000 x 1000 bytes.
39 D5200_5(33-39) 12/7/06, 11:00 am 39.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Fujitsu D5200 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Fujitsu D5200 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Fujitsu D5200, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Fujitsu D5200 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Fujitsu D5200, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Fujitsu D5200.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Fujitsu D5200. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Fujitsu D5200 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
