Manuel d'utilisation / d'entretien du produit MR-8CD du fabricant Fostex
Aller à la page of 148
Owner’ s Man ual 8588 082 000 (447055) Caution: Please visit Fostex website (http:// www.fostex.com) for the latest version software. MIN MAX 10 0 LR 10 0 LR 10 0 LR R L MIN MAX LINE MIC LINE MIC LI.
2 MR-8HD/CD Owner ’s Manual (Safety instructions/Contents) CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 12.
3 MR-8HD/CD Owner ’s Manual (Safety instructions/Contents) Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth.
4 MR-8HD/CD Owner ’s Manual (Safety instructions/Contents) Read this chapter fir st! ...................................................................................................... .......9 Intr oduction ......................................
5 MR-8HD/CD Owner ’s Manual (Safety instructions/Contents) Input connection ..................................................................................................................33 Input channel ..........................................
6 MR-8HD/CD Owner ’s Manual (Safety instructions/Contents) T rack bouncing ................................................................................................................ .......63 Preliminary knowledge .............................
7 MR-8HD/CD Owner ’s Manual (Safety instructions/Contents) MIDI synchr onization .......................................................................................................... ...85 Synchr onization using MTC ............................
8 MR-8HD/CD Owner ’s Manual (Safety instructions/Contents) T rouble f or recor ding ......................................................................................................... 132 T rouble f or pla yback ...............................
9 MR-8HD/CD Owner ’s Manual (Read this chapter first!) Read this c hapter fir st! This chapter describes precautions before using, as well as features and basic knowledge of the MR-8HD/CD. To understand the MR-8HD/CD features and basic functions, read this chapter before using.
10 MR-8HD/CD Owner ’s Manual (Read this chapter first!) Thank you very much for purchasing the Fostex MR-8HD/CD digital multitracker. The MR-8HD/CD is a digital multitracker which can record 8-track audio at 44.1 kHz/16 bits on the internal 3.5-inch hard disk.
11 MR-8HD/CD Owner ’s Manual (Read this chapter first!) About power suppl y • Be sure to connect the MR-8HD/CD to the power supply specified in the specifications section of this owner's manual.
12 MR-8HD/CD Owner ’s Manual (Read this chapter first!) This section describes the basics of the MR-8HD/CD you should know before using the MR- 8HD/CD. Recording method The MR-8HD/CD is fitted with a 3.5-inch hard disk drive. Songs are recorded on a hard disk along with the ABS time (from 00m 00s 000ms to 399m 59s 999ms).
13 MR-8HD/CD Owner ’s Manual (Read this chapter first!) About song To understand songs, imagine separated rooms as shown below. Each room can be regarded as a song. With the MR-8HD/CD, you can create up to 99 rooms (songs) on the hard disk (although the available space may limit the number of songs).
14 MR-8HD/CD Owner ’s Manual (Read this chapter first!) Time base Input monitor and repr o monitor The term, " time base ", is used as the reference of recorder position information. Using the [ TIME B ASE SELECT ] key, you can select from among two time base modes: ABS time and bar/beat mode.
15 MR-8HD/CD Owner ’s Manual (Read this chapter first!) [TRIM] control You must pay great attention to the [ TRIM ] control adjustment when recording to the MR-8HD/ CD.
16 MR-8HD/CD Owner ’s Manual (Read this chapter first!).
17 MR-8HD/CD Owner ’s Manual (Names and functions) Names and functions This chapter describes the names and functions of the controls, keys, connectors, etc. on the MR-8HD/CD top panel, side panel and rear panel, as well as details of the display. See this chapter whenever you want to know the function of a control, key, etc.
18 MR-8HD/CD Owner ’s Manual (Names and functions) 1 . [INPUT A] input connectors (XLR connector and phone jac k) MIN MAX 10 0 LR 10 0 LR 10 0 LR R L MIN MAX LINE MIC LINE MIC LINE MIC LINE MIC REC .
19 MR-8HD/CD Owner ’s Manual (Names and functions) <Note>: This switch cannot turn off the power completely. When this switch is "up", the MR-8HD/CD enters standby mode (i.
20 MR-8HD/CD Owner ’s Manual (Names and functions) MIN MAX 10 0 LR 10 0 LR 10 0 LR R L MIN MAX LINE MIC LINE MIC LINE MIC LINE MIC REC SELECT 01 0 1 2 3 4 5/6 MASTER MAX MAX MIN MIN 7/8 LOCATE REC E.
21 MR-8HD/CD Owner ’s Manual (Names and functions) 30 . [MASTERING] keys (PO WERFUL / NA TURAL / BRIGHT) Used to select the desired mastering effect during track bounce or mixdown. You can select from three effect types by pressing an appropriate key (see page 62).
22 MR-8HD/CD Owner ’s Manual (Names and functions) Either of the [BAL] XLR and [UNBAL/GUIT AR] phone connec- tors can be used. Set the switch to this position when the source is an external microphone or line level source. MIC/LINE GTR DIST GTR CLEAN 4 .
23 MR-8HD/CD Owner ’s Manual (Names and functions) 5 . [MIDI OUT] jac k (DIN 5-pin connector) <Caution>: Do not connect your personal computer to the [ USB HOST ] port. Used to connect to a MIDI IN jack of an ex- ternal MIDI device (such as a MIDI se- quencer) (see page 86).
24 MR-8HD/CD Owner ’s Manual (Names and functions) When turning on the MR-8HD/CD, the display shows the startup screen (showing the startup status of the MR-8HD/CD), followed by the " Home " screen, which is similar to the one below.
25 MR-8HD/CD Owner ’s Manual (Names and functions) When the display shows the home screen, pressing the [ TIME B ASE SELECT ] key switches the time base mode between ABS and bar/beat.
26 MR-8HD/CD Owner ’s Manual (Names and functions) If a serious problem happens to the MR-8HD/CD during operation, an appropriate warning message is shown on the display. Most warning messages are being shown until the [ MENU/ENTER ] knob is pressed.
27 MR-8HD/CD Owner ’s Manual (Basic operations) Basic operations This chapter describes power connection, power on/off, demo song play- back, etc., as well as basic multitrack recording.
28 MR-8HD/CD Owner ’s Manual (Basic operations) The MR-8HD/CD operates by AC power. Before you start using the MR-8HD/CD, you must con- nect the supplied power cord.
29 MR-8HD/CD Owner ’s Manual (Basic operations) Connect headphones to either of the two [ PHONES ] jacks of the MR-8HD/CD. Both jacks feed the same signal so you may connect headphones whichever you like. If you have a powered monitor speaker, you may connect it to the [ STEREO OUT ] L or R jacks of the MR-8HD/CD.
30 MR-8HD/CD Owner ’s Manual (Basic operations) In the demo song, approximately 1-minute audio is recorded on all eight tracks. Follow the procedure below for listening to the demo song. In the following procedure, it is assumed that the MR-8HD/CD is turned on and a pair of headphones (or a monitor speaker system) is connected.
31 MR-8HD/CD Owner ’s Manual (Basic operations) This section describes how to create a new song for recording on the hard disk, while keeping the demo song. In the following procedure, it is assumed that the MR-8HD/CD is stopped at the beginning (ABS ZERO) of the demo song.
32 MR-8HD/CD Owner ’s Manual (Basic operations) 6) After completing song name entry , press the [MENU/ENTER] knob. The cursor moves to “ [ENTER] ” at the bottom of the screen. 7) While “[ENTER]” is flashing, press the [MENU/ENTER] knob. The display now shows the home screen of the newly created song (My_Song).
33 MR-8HD/CD Owner ’s Manual (Basic operations) The MR-8HD/CD provides four input channels: [ INPUT A ], [ INPUT B ], [ INPUT C ] and [ INPUT D ]. Each channel provides both the XLR and 1/4" phone connectors.
34 MR-8HD/CD Owner ’s Manual (Basic operations) The following shows the recording track combinations and available input channel(s) by the number of tracks simultaneously recorded. Recor ding track combinations and a v ailable input c hannel(s) Recording to a single trac k Only [INPUT A] is a v ailab le.
35 MR-8HD/CD Owner ’s Manual (Basic operations) You can record onto any one of tracks 1 through 4. When making recording to a single track, you can record a signal fed to the [ INPUT A ] channel. The following describes the procedure for recording an acoustic guitar onto track 1 via a micro- phone.
36 MR-8HD/CD Owner ’s Manual (Basic operations) 6) While playing the guitar , adjust the recording le vel using the [TRIM] control of the [INPUT A] channel. Adjust the level appropriately so that the PEAK indicator does not light. Turning the [ PHONES V OL ] control clockwise raises the headphone monitor level.
37 MR-8HD/CD Owner ’s Manual (Basic operations) Overdubbing is recording something new while listening to the previously recorded track(s). It is a very important method in multitrack recording. The following describes an example of overdubbing for recording a stereo keyboard to tracks 7/8 while listening to the guitar on track 1.
38 MR-8HD/CD Owner ’s Manual (Basic operations) 9) While holding down the [RECORD] ke y , press the [PLA Y] key to start recording. The recorder records the keyboard while playing back track 1 (guitar). 10) When recording completes, press the [STOP] ke y to stop the recorder .
39 MR-8HD/CD Owner ’s Manual (Basic operations) You can simultaneously record up to four tracks. See page 34 for the available combinations of four recording tracks. The following describes the procedure for recording different sound sources simultaneously to tracks 1 through 4.
40 MR-8HD/CD Owner ’s Manual (Basic operations) 6) While pla ying the music, adjust the recor ding level of each trac k using the [TRIM] contr ol of each input channel. Adjust the level appropriately so that the PEAK indicator does not light. Turning the [ PHONES V OL ] control clockwise raises the headphone monitor level.
41 MR-8HD/CD Owner ’s Manual (Basic operations) <Tip>: By sliding up or down the MR-8HD/ CD [ MASTER ] fader gradually, you can fade in or fade out recording. 3) Adjust the recor ding level of the master recor der while rehearsing mixdo wn. See the manual of the master recorder for details about how to adjust the recording level.
42 MR-8HD/CD Owner ’s Manual (Basic operations) 1) Connect the [DIGIT AL OUT] connector of the MR-8HD/CD to the digital input connector of a digital master recorder using an optical cab le. <Note>: The [ DIGIT AL OUT ] connector of the MR-8HD/CD is the Toslink optical type.
43 MR-8HD/CD Owner ’s Manual (Advanced playback and locate functions) Ad v anced pla ybac k and locate functions This chapter describes advanced playback functions including cueing, partial playback (between points A and B), special play modes, as well as the locate function.
44 MR-8HD/CD Owner ’s Manual (Advanced playback and locate functions) • By holding down the [F FWD] key during pla y bac k, the recorder starts cueing f orwar ds at 3 x speed.
45 MR-8HD/CD Owner ’s Manual (Advanced playback and locate functions) While the recorder is stopped, each time you press the [ PLA Y MODE ] key, the play mode switches among " Off ", " A uto Pla y ", " A uto return " and " Loop ".
46 MR-8HD/CD Owner ’s Manual (Advanced playback and locate functions) In the Auto play mode, when locating to the ABS ZERO, REC END, LOCATE A or LOCATE B point, the recorder automatically starts playback from the point. The following shows the auto play function after locating to the LOCATE A point (see page 48 for the locate function).
47 MR-8HD/CD Owner ’s Manual (Advanced playback and locate functions) When the loop mode is active (while the auto punch in/out mode is inactive), the LOCATE A and LOCATE B points are used as the loop start and end points.
48 MR-8HD/CD Owner ’s Manual (Advanced playback and locate functions) The following describes the locate functions, which allow you to immediately skip to a specified point in a song. Time locate Regardless of the current recorder position, you can locate to the beginning (ABS ZERO) of the song or the recording end (REC END) of the song.
49 MR-8HD/CD Owner ’s Manual (Advanced playback and locate functions) Locating to the LOCA TE A or LOCA TE B point You can set the desired point of a song as the LOCATE A or LOCATE B point. The LOCATE A and B points can be used not only for locating, but also for auto punch in/out, play modes and part editing, etc.
50 MR-8HD/CD Owner ’s Manual (Advanced playback and locate functions) Locating While the recor der is stopped, press the [LOCA TE A/IN] (or [LOCA TE B/OUT]) key .
51 MR-8HD/CD Owner ’s Manual (Punch in/out) Punc h in/out Using the punch in/out function of the MR-8HD/CD, you can overwrite the desired part of the recorded track. " Punch in " means switching from playback to recording, while " punch out " means switching from record- ing to playback.
MR-8HD/CD Owner ’s Manual (Punch in/out) 52 1) Press the [REC SELECT] ke y f or the track y ou are going to make punch in/out recor ding. The track is record-armed. 2) Locate the recorder to the point bef ore the punch- in point and press the [PLA Y] key to start playbac k.
53 MR-8HD/CD Owner ’s Manual (Punch in/out) 1) Connect the f ootswitc h to the [FOO T SW] jac k on the MR-8HD/CD rear panel. 2) Press the [REC SELECT] ke y f or the track y ou are going to make punch in/out recor ding.
MR-8HD/CD Owner ’s Manual (Punch in/out) 54 By setting the punch-in and punch-out points in advance, the recorder automatically makes punch in/out recording for you.
55 MR-8HD/CD Owner ’s Manual (Punch in/out) After setting the punch-in and punch-out points appropriately, you can rehearse the auto punch in/out for checking the punch-in and -out points or practicing punch-in and -out timing. <Tip>: You can immediately locate to the punch-in point by pressing the [ LOCA TE A/IN ] key.
MR-8HD/CD Owner ’s Manual (Punch in/out) 56 After rehearsing the auto punch-in/out operation, it's time for executing actual auto punch in/ out operation. 1) Locate the recorder to the point bef ore the punch- in point. 2) Make sure that "A UT O PUNCH" is shown on the screen (i.
57 MR-8HD/CD Owner ’s Manual (Using effects) Using eff ects The MR-8HD/CD provides the insert effects for recording (microphone and amplifier simulation effects), the delay/reverb effects for track bounce or mixdown (for tracks 1 through 4 only), and the mastering effects for L/R mix.
58 MR-8HD/CD Owner ’s Manual (Using effects) The [ INPUT A ] channel of the MR-8HD/CD provides two types of insert effects: microphone and amplifier simulation effects. These effects can be used during recording. These effects simulate popular microphones and guitar amplifiers.
59 MR-8HD/CD Owner ’s Manual (Using effects) During recording, you can apply external effects to a sound source connected to an input con- nector in the [ INPUT A ] channel.
60 MR-8HD/CD Owner ’s Manual (Using effects) Selecting an effect type The MR-8HD/CD has the original built-in reverb/delay processor featuring the newly-developed algorithm. You can apply the reverb or delay to playback signals of tracks 1 through 4 during mixdown and track bouncing.
61 MR-8HD/CD Owner ’s Manual (Using effects) As shown in the signal flowchart below, a track (playback) signal after the track fader is fed to the [ EFFECT SEND ] control and adjusted, then fed to the effect processor input.
62 MR-8HD/CD Owner ’s Manual (Using effects) The MR-8HD/CD provides the dedicated mastering effects for the L/R stereo buss. You can use the mastering effects when bouncing more than one track to stereo tracks or when mixing down tracks 1 through 8 to stereo and sent to an external master recorder for recording.
63 MR-8HD/CD Owner ’s Manual (T rack bouncing) T rac k bouncing This chapter describes track bouncing which is an important func- tion in the recording process. The track bouncing mixes several tracks and records onto other two tracks. By using this function, you can record more sound materials to the MR-8HD/CD tracks.
64 MR-8HD/CD Owner ’s Manual (T rack bouncing) You can record more than eight materials using the track bouncing function as shown in the following example. <Step 1> Make recording to tracks 1 through 6. <Step 2> Bounce tracks 1 through 6 to tracks 7/8.
65 MR-8HD/CD Owner ’s Manual (T rack bouncing) • "1-6 > 7/8" mode (see page 68) In the " 1-6 > 7/8 " mode, tracks 1 through 6 are played back, mixed down to stereo, and bounced to tracks 7/8. In this mode, you can apply a reverb (or delay) to tracks 1 through 4, as well as the mastering effect to the mixed signals.
66 MR-8HD/CD Owner ’s Manual (T rack bouncing) Before executing track bouncing, you can rehearse it. While rehearsing track bouncing, you can control the playback level, panning and reverb (or delay) send setting of each source track, as well as apply the mastering effect to the mixed L/R signals.
67 MR-8HD/CD Owner ’s Manual (T rack bouncing) 5) After finishing rehear sal, press the [ST OP] ke y to stop the recor der and locate it to the beginning of the song. Do not move the controls and faders after finishing rehearsal. 2) Press the [PLA Y] key while holding down the [RECORD] key .
68 MR-8HD/CD Owner ’s Manual (T rack bouncing) You can bounce tracks 1 through 6 to tracks 7/8. As described earlier in " Bouncing tracks 1 thr ough 4 to tracks 5/6 ", you can rehearse track bouncing as many times as you like before executing actual track bouncing.
69 MR-8HD/CD Owner ’s Manual (T rack bouncing) 5) After finishing rehear sal, press the [ST OP] ke y to stop the recor der and locate it to the beginning of the song. Do not move the controls and faders after finishing rehearsal. 1) Before carrying out actual trac k bouncing, make sure that the bounce mode is selected to "1-6>7/8".
70 MR-8HD/CD Owner ’s Manual (T rack bouncing) You can bounce tracks 1 through 8 to tracks 7/8 of a new song. A new song is automatically created when executing track bouncing ( <Note>: In the “1-8 > NEW SONG” mode, y ou cannot bounce the desired part of a song by using the trac k bouncing and auto punc h in/out functions together ).
71 MR-8HD/CD Owner ’s Manual (T rack bouncing) After finishing rehearsal, let's carry out actual track bouncing. 1) While the recor der is stopped, press the [1-8 > NEW SONG] key . 2) Press the [MENU/ENTER] knob while holding down the [RECORD] key .
72 MR-8HD/CD Owner ’s Manual (T rack bouncing) The MR-8HD/CD can mix input signals of [ INPUT A ] through [ INPUT D ]. The following diagram shows an example of mixing signals of INPUT A through INPUT D when bouncing tracks 1 through 6 to tracks 7/8.
73 MR-8HD/CD Owner ’s Manual (T rack bouncing) The default panning settings are as below. You can set each input to the desired panning position from L10 (hard left) to R10 (hard right).
74 MR-8HD/CD Owner ’s Manual (T rack bouncing) Typically, bouncing is executed from the beginning to the end of a song, as shown in Figure 1 below. However, you can bounce only the desired part by using the track bouncing and punch in/out functions together.
75 MR-8HD/CD Owner ’s Manual (Rhythm guide function) Rh ythm guide function The MR-8HD/CD offers the rhythm guide function, which allows output- ting the rhythm guide click during recording. This chapter describes how to output the rhythm guide, set the time signature/tempo and create the conductor map.
76 MR-8HD/CD Owner ’s Manual (Rhythm guide function) The MR-8HD/CD provides the metronome function which can output the rhythm guide click during recording. You can easily output the guide click from the [ STEREO OUT L, R ] jacks by pressing the [ RHYTHM GUIDE ] key on the top panel.
77 MR-8HD/CD Owner ’s Manual (Rhythm guide function) Rhythm Guide: Off Conductor Map: Of f Rhythm guide No output Bar/beat indication The "Signature" and "T empo" item settings are effective. Rhythm Guide: Off Conductor Map: On No output The conductor map is effective.
78 MR-8HD/CD Owner ’s Manual (Rhythm guide function) 2) Rotate the [MENU/ENTER] knob to select "Song ", and press the [MENU/ENTER] knob. The display now shows the song editing screen, where " Back " is highlighted.
79 MR-8HD/CD Owner ’s Manual (Rhythm guide function) 4) Rotate the [MENU/ENTER] knob to select "---Bar -> ---", and press the [MENU/ENTER] knob. The display now shows the screen for setting the new time signature event, where " Back " is highlighted.
80 MR-8HD/CD Owner ’s Manual (Rhythm guide function) • Deleting an unnecessary time signature event You can delete an unnecessary time signature event. 2) Rotate the [MENU/ENTER] knob to select "[DELETE]" at the bottom, and press the [MENU/ENTER] knob.
81 MR-8HD/CD Owner ’s Manual (Rhythm guide function) By default, the bar/beat value at the beginning (ABS ZERO) of the song is set to " bar -2/beat 1 ". This offset (the bar/beat value at ABS ZERO) is called " bar offset ". You can change the default bar offset to the desired value.
82 MR-8HD/CD Owner ’s Manual (Rhythm guide function) Bar 1/beat 1: 120 bpm Bar 4/beat 2: 180 bpm Bar 8/beat 3: 90 bpm Bar 12/beat 1: 120 bpm Bar 16/beat 4: 250 bpm After setting the time signature map, you have to create the tempo map by adding the necessary tempo event(s).
83 MR-8HD/CD Owner ’s Manual (Rhythm guide function) 7) Rotate the [MENU/ENTER] knob to select "Beat = 1 ", and press the [MENU/ENTER] knob. " 1 " starts flashing and you can now set the beat number. You can enter the beat number between 1 and 8.
84 MR-8HD/CD Owner ’s Manual (Rhythm guide function) • Deleting an unnecessary tempo event You can delete an unnecessary tempo event. 2) Rotate the [MENU/ENTER] knob to select "[DELETE]" at the bottom, and press the [MENU/ENTER] knob. The event is immediately deleted and the display returns to the tempo map screen.
85 MR-8HD/CD Owner ’s Manual (MIDI synchronization) MIDI sync hr onization By connecting the external MIDI devices (such as a sequencer, sound module, computer, etc.
86 MR-8HD/CD Owner ’s Manual (MIDI synchronization) The following describes how to synchronize a sequencer to the MR-8HD/CD which supports MTC (MIDI Time code). Connect the [ MIDI OUT ] connector of the MR-8HD/CD to the [ MIDI IN ] connector of an external MIDI sequencer using a MIDI cable.
87 MR-8HD/CD Owner ’s Manual (MIDI synchronization) The following describes how to synchronize a sequencer to the MR-8HD/CD using MIDI clock. Use this method if the sequencer does not support MTC (MIDI Time code).
88 MR-8HD/CD Owner ’s Manual (MIDI synchronization).
89 MR-8HD/CD Owner ’s Manual (Data export to a personal computer) Data e xpor t to a per sonal computer This chapter describes how to export song data on tracks 7/8 to a per- sonal computer. To export the desired song data to a personal computer, you must con- vert the song data to a stereo WAV file.
90 MR-8HD/CD Owner ’s Manual (Data export to a personal computer) This section describes how to convert audio data on tracks 7/8 which has been bounced or recorded in stereo to a stereo WAV file.
91 MR-8HD/CD Owner ’s Manual (Data export to a personal computer) 5) Press the [MENU/ENTER] knob. The MR-8HD/CD quits the conversion function and the display returns to the home screen. <Editing a file name> You can edit a file name by the following procedure.
92 MR-8HD/CD Owner ’s Manual (Data export to a personal computer) The MR-8HD/CD is equipped with the USB port for direct connection to a personal computer using a USB cable. The USB connection allows you to export the stereo WAV file data, which is converted from a pair of mono WAV files on tracks 7/8, to your computer.
93 MR-8HD/CD Owner ’s Manual (Data export to a personal computer) 3) Highlight "USB " by rotating the [MENU/ENTER] knob, then press the [MENU/ENTER] knob. The display shows the USB menu screen. 1) T urn on the power of the per sonal computer and the MR-8HD/CD .
94 MR-8HD/CD Owner ’s Manual (Data export to a personal computer) The MR-8HD/CD internal hard disk is protected by default. The protection is effective only in the USB mode in which the MR-8HD/CD is used with a personal computer. You can make the hard disk “ read only ” (protected) or “ read/write enabled ” (unprotected).
95 MR-8HD/CD Owner ’s Manual (Data export to a personal computer) You can archive song data recorded by the MR-8HD/CD by using either of the following meth- ods. (1) Using the W A V Mana ger supplied b y Foste x The WAV Manager converts each track data to a single mono file.
96 MR-8HD/CD Owner ’s Manual (Data export to a personal computer) (3) Cop y data to a CD-R/R W disc using the internal CD-R/R W drive . As with (1), each track data is converted to a single mono WAV file. The data is compressed to a small size and saved to a CD-R/RW disc.
97 MR-8HD/CD Owner ’s Manual (Song management) Song mana g ement This chapter explains the following five operation procedures for song management. 1) Selecting the desired song. 2) Editing a song name. 3) Deleting an unnecessary song. 4) Protecting a song.
98 MR-8HD/CD Owner ’s Manual (Song management) The following describes how to select the desired song from the disk when more than one song is created on the disk. You can also create a new song by the similar procedure. See " Basic operations " (page 31) for details about how to create a new song.
99 MR-8HD/CD Owner ’s Manual (Song management) You can edit a current song name save the edited song name. Only the current song can be edited. 1) Load the desired song of which y ou are going to edit the song name. 2) While the recor der is stopped, press the [MENU/ENTER] knob to enter the menu mode.
100 MR-8HD/CD Owner ’s Manual (Song management) <Notes> • You cannot delete a song which is protected. To delete such a song, release the protection of the song first (see the next page). • A deleted song file still remains as a “ hidden file ” on the hard disk.
101 MR-8HD/CD Owner ’s Manual (Song management) You can protect a song to prevent an accidental erasure. The protection can be released when- ever you want. To keep a recorded song safely, we recommend protecting it. You can make protection setting only for the current song.
102 MR-8HD/CD Owner ’s Manual (Song management) <Note>: You cannot make recording or editing to a protected song. If you want to make recording or editing to a protected song, you must release the protection first.
103 MR-8HD/CD Owner ’s Manual (T rack editing) T rac k editing This chapter describes how to edit whole data of a selected (mono or stereo) track. Track editing does not consume the hard disk space. There- fore, the remaining space of the disk does not change by executing track editing.
104 MR-8HD/CD Owner ’s Manual (T rack editing) 5) Rotate the [MENU/ENTER] knob to select "Erase T rack = *", and press the [MENU/ENTER] knob. The currently selected option flashes and you can now select the desired option by rotating the [ MENU/ENTER ] knob.
105 MR-8HD/CD Owner ’s Manual (T rack editing) 8) Press the [MENU/ENTER] knob. The display now returns to the track edit menu screen, where “ Erase T rack ” is highlighted.
106 MR-8HD/CD Owner ’s Manual (T rack editing) 9) Press the [MENU/ENTER] knob. The display now returns to the track edit menu screen, where “ Copy-P aste T rk ” is highlighted. 10) Press the [STOP] ke y to exit the menu mode. <Note>: If a destination track has recorded data, pasting the copied data overwrites the previous data.
107 MR-8HD/CD Owner ’s Manual (T rack editing) TRK 1 TRK 2 TRK 3 TRK 4 TRK 5 TRK 6 TRK 7 TRK 8 ABS ZERO REC END You can move whole data (from ABS ZERO to REC END) of the desired track(s) to the other desired track(s). After the data is moved, the original track(s) is(are) silent.
108 MR-8HD/CD Owner ’s Manual (T rack editing) You can exchange whole data (from ABS ZERO to REC END) between the desired track(s). <Note>: You cannot exchange track data of a song protected. Release the protection before exchang- ing track data.
109 MR-8HD/CD Owner ’s Manual (T rack editing) 4) Rotate the [MENU/ENTER] knob to select "Change T rac k ", and press the [MENU/ENTER] knob. 5) Rotate the [MENU/ENTER] knob to select "Source T rack = *", and press the [MENU/ENTER] knob.
110 MR-8HD/CD Owner ’s Manual (T rack editing) 9) Press the [MENU/ENTER] knob. The display now returns to the track edit menu screen, where “ Change T rack ” is highlighted.
111 MR-8HD/CD Owner ’s Manual (Part editing) P ar t editing This chapter describes how to edit a " par t " (*) of recorded song. You can edit data of a track or tracks between the " LOCA TE A " and " LOCA TE B " points.
112 MR-8HD/CD Owner ’s Manual (Part editing) The time (or bar/beat/clock) value changes in realtime as the recorder moves (i.e. when it plays, fastforwards, rewinds, locates, etc.
113 MR-8HD/CD Owner ’s Manual (Part editing) TRK 1 TRK 2 TRK 3 TRK 4 TRK 5 TRK 6 TRK 7 TRK 8 Silent LOCA TE A point LOCA TE B point REC END ABS ZERO <Note>: You cannot erase the part(s) of a song which is protected. Release the song protection before erasing the part(s).
114 MR-8HD/CD Owner ’s Manual (Part editing) You can copy the desired part(s) of the selected track(s) and paste it(them) to the same time position of the other desired track(s). The copy/paste operation of a part or parts can be made only within the current song.
115 MR-8HD/CD Owner ’s Manual (Part editing) 10) Press the [MENU/ENTER] knob. The display now returns to the part edit menu screen, where “ Copy-P aste P art ” is highlighted. 11) Press the [ST OP] ke y to e xit the men u mode. 6) Rotate the [MENU/ENTER] knob to select "Source T rack = *", and press the [MENU/ENTER] knob.
116 MR-8HD/CD Owner ’s Manual (Part editing) You can copy the desired part(s) of the selected track(s) and paste it(them) to the other time position of the desired track(s).
117 MR-8HD/CD Owner ’s Manual (Part editing) 6) Rotate the [MENU/ENTER] knob to select "Copy T rack ", and press the [MENU/ENTER] knob. The display now shows the screen for selecting the copy source track(s). You can select the copy source track(s) by rotating the [ MENU/ENTER ] knob.
118 MR-8HD/CD Owner ’s Manual (Part editing) 5) Press the [MENU/ENTER] knob. The display now returns to the part edit menu screen, where “ P aste Part ” is highlighted.
119 MR-8HD/CD Owner ’s Manual (Part editing) You can move the desired part(s) of the desired track(s) to the other desired track(s). The part move operation can be made only within the current song. After the part move opera- tion is carried out, the source part(s) becomes silent.
120 MR-8HD/CD Owner ’s Manual (Part editing) 9) Rotate the [MENU/ENTER] knob to mo ve the cursor to "[ENTER]" on the screen, and press the [MENU/ENTER] knob. The display shows " Please Wait ", immediately followed by " Completed " when the MR-8HD/ CD completes the move operation.
121 MR-8HD/CD Owner ’s Manual (Part editing) 5) Rotate the [MENU/ENTER] knob to select "Change Part " in the second page, and press the [MENU/ENTER] knob. The display now shows the screen for selecting the source track(s) and destination track(s) of the exchange operation.
122 MR-8HD/CD Owner ’s Manual (Part editing) 10) Press the [MENU/ENTER] knob. The display now returns to the part edit menu screen, where “ Change Part ” is highlighted. 11) Press the [STOP] ke y to exit the menu mode. 8) Rotate the [MENU/ENTER] knob to select the destination track(s), and press the [MENU/ENTER] knob.
123 MR-8HD/CD Owner ’s Manual (Other functions) Other functions This chapter describes the following functions which are important for using the MR-8HD/CD.
124 MR-8HD/CD Owner ’s Manual (Other functions) You can reformat the MR-8HD/CD internal hard disk by using the FAT32 file system. By refor- matting the hard disk, all existing song data on the hard disk is erased, while all setting data including the menu settings are initialized, and a new song (Song01) is automatically created.
125 MR-8HD/CD Owner ’s Manual (Other functions) The level meters shown on the display have the peak hold function. When it is enabled, the meter peak value during recording is held for the specified time. The default meter peak hold time is three seconds.
126 MR-8HD/CD Owner ’s Manual (Other functions) As described earlier on page 47, when both the auto punch in/out and loop modes are active, the pre-roll and post-roll are effective in the loop function. You can set the pre-roll and post-roll time value by the following procedure.
127 MR-8HD/CD Owner ’s Manual (Other functions) While the time base is set to the bar/beat mode, if you set the "Beat resolution" item in the menu to "On", the LOCATE A and B points are set in beat resolution.
128 MR-8HD/CD Owner ’s Manual (Other functions) The MR-8HD/CD can supply phantom power (+48 V) to the XLR balanced connectors of [ INPUT A ] through [ INPUT D ]. So you can connect condenser microphones which require phantom power. You can turn on or off phantom power to the XLR connectors via the menu mode.
129 MR-8HD/CD Owner ’s Manual (Other functions) 4) Rotate the [MENU/ENTER] knob to select "On", and press the [MENU/ENTER] knob. The screen shows a warning message for few seconds, and returns to the previous screen. While the message is shown, all input channels are muted.
130 MR-8HD/CD Owner ’s Manual (Other functions) By initializing the MR-8HD/CD, you can initialize all global menu settings common to all songs, as well as the time base and display contrast level. 1) While the recor der is stopped, press the [MENU/ENTER] knob to enter the menu mode.
131 MR-8HD/CD Owner ’s Manual (T roubleshooting) T r oubleshooting If you encounter any problem while operating the MR-8HD/CD, check the following for the possible cause of the problem before contacting our service station or dealer.
132 MR-8HD/CD Owner ’s Manual (T roubleshooting) <T rouble 7> During overdubbing, I cannot monitor the playback sig- nal of the recorded track. • Is the track fader f or the pla yback trac k raised? During overdubbing, raise the faders for both the playback and recording tracks appropriately .
133 MR-8HD/CD Owner ’s Manual (T roubleshooting) <T rouble 8> I cannot execute auto punch in/out. • Is " " shown on the screen? If it is not, press the [AUTO PUNCH] key to make the auto punch in/out function active.
134 MR-8HD/CD Owner ’s Manual (T roubleshooting) <T rouble 1> I cannot apply the effects. • Are the [EFFECT SEND] control f or the trac k you want to appl y the effect and trac k fader raise.
135 MR-8HD/CD Owner ’s Manual (T roubleshooting) <T rouble 1> I cannot hear the rhythm guide click. • Is the [RHYTHM GUIDE] ke y is illuminated? When the [RHYTHM GUIDE] key is not illuminated, the rhythm guide function is not active and you cannot hear the rhythm guide click.
136 MR-8HD/CD Owner ’s Manual (T roubleshooting).
137 MR-8HD/CD Owner ’s Manual (Specifications) MR-8HD/CD Specifications.
138 MR-8HD/CD Owner ’s Manual (Specifications) [Inputs/Outputs] 0dBu=0.775V rms, 0dBV=1.0Vrms, Reference level: -12dBfs Analog input [INPUT A - INPUT D] Connectors : XLR-3-31 type (#2: hot balanced) : 1/4-inch, phone type Input level : -48dBu (MIC) to +4dBu (LINE) Input impedance : 1.
139 MR-8HD/CD Owner ’s Manual (Specifications) MIN MAX 10 0 LR 10 0 LR 10 0 LR R L MIN MAX LINE MIC LINE MIC LINE MIC LINE MIC REC SELECT 01 0 1 2 3 4 5/6 MASTER MAX MAX MIN MIN 7/8 LOCATE REC END A.
140 MR-8HD/CD Owner ’s Manual (Specifications) When using the bounce mode (1-4 > 5/6 mode) When using the normal mode DISTORTION CLEAN INPUT A INPUT B INPUT C INPUT D TRIM TRIM TRIM TRIM A/D A/D .
141 MR-8HD/CD Owner ’s Manual (Specifications) When using the bounce mode (1-6 > 7/8 mode) When using the bounce mode (1-8 > New Song mode) DISTORTION CLEAN INPUT A INPUT B INPUT C INPUT D TRI.
142 MR-8HD/CD Owner ’s Manual (Specifications) <Digital multitrac ker> T ransmitted Recognized Remarks Function............ Basic Def ault Channel Changed Def ault Message Altered Mode Note Nu.
143 MR-8HD/CD Owner ’s Manual (Specifications) <A> Amp simulation ...............................................................58 Auto return ......................................................................45 Auto play ................
144 MR-8HD/CD Owner ’s Manual (Specifications) Declaration of EC Directive This equipment is compatible with the EMC Directive (89/336/EEC) - Directive on approximation of member nation's ordin.
FOR THE US CUST OMERS ONL Y FOSTEX AMERICA LIMITED W ARRANTY The following statement defines specific legal rights. You may also have additional rights de- pending on the state in which the Fostex product was purchased.
FOSTEX AMERICA LIMITED W ARRANTY To claim all warranty service, first access www.fostex.com to receive service authorization (RMA number). Then present the authorization together with the bill of sale, which shows the date of original purchase to Fostex America.
.
FOSTEX CO . 3-2-35, Musashino, Akishima-shi, T okyo, Japan, 196-0021 FOSTEX AMERICA 13701 Cimarron Avenue Gardena, CA 90249 U.S.A. © PRINTED IN CHINA AUGUST 2006 8588 082 000 447055.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Fostex MR-8CD c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Fostex MR-8CD - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Fostex MR-8CD, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Fostex MR-8CD va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Fostex MR-8CD, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Fostex MR-8CD.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Fostex MR-8CD. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Fostex MR-8CD ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
