Manuel d'utilisation / d'entretien du produit CDA-7893 du fabricant Alpine
Aller à la page of 43
EN FR ES ES IT SE R R ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel.: (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC.
CHM-S630 CHA-S634 • CD changer for CDA-7995/CDA- 7894/CDA-7893/CDA-7892. • Changeur CD pour CDA-7995/CDA- 7894/CDA-7893/CDA-7892. • Cambiador de CD para CDA-7995/ CDA-7894/CDA-7893/CDA-7892. Alpine CD Changers Give Y ou More! More m usical selections, more versatility , more con venience .
1 -EN ENGLISH Contents Operating Instr uctions W ARNING W ARNING .................................................. 3 CA UTION ................................................... 3 PRECA UTIONS ......................................... 3 Basic Operation Detaching the Front Panel .
2 -EN MP3 Operation Playing MP3 Files (CDA-7995/ CDA-7894 only) .......................................... 24 Playing MP3 Files with the CD Changer (Optional) .................................................... 24 Music Sensor (Skip) ................
3 -EN WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. DO NOT OPERA TE ANY FUNCTION THA T T AKES YOUR A TTENTION A WA Y FROM SAFEL Y DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop.
4 -EN PRECAUTIONS Never Attempt the Following Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off. Inserting Discs Y our player accepts only one disc at a time for playback.
5 -EN Basic Operation PO WER RESET Detaching the Fr ont Panel 1 Press and hold the PO WER button f or more than 3 seconds to turn off the power . 2 Press the (Release) button at upper left side until the front panel pops out. 3 Grasp the left side of the front panel and pull it out.
6 -EN Basic Operation CENTER f MUTE B AND g DN f UP MODE (Rotary encoder) Adjusting V olume/Balance (Between Left and Right)/F ader (Between Front and Rear)/Defeat 1 Press the MODE (Rotary encoder) button repeatedly to choose the desired mode.
7 -EN Setting the Bass Contr ol Y ou can change the Bass F requency emphasis to create your o wn tonal preference . 1 Press the CENTER f button to select the BASS (bass Center frequency) control mode. 2-1 Setting the bass Center frequency: Press the g DN or f UP b utton to select the desired bass center frequency .
8 -EN Basic Operation Rotary encoder T . CORR B AND Here we calculate the time correction v alue for the front left speaker in the diag ram at the left. Conditions: F arthest Speaker – listening position : 2.25 m (88-9/16") F ront left speaker – listening position : 0.
9 -EN Bass Focus The time diff erence between the front-rear/left-right speakers , can be adjusted at the same time. With an initial dela y of 0.3 ms for each of the 0 to 39 steps , audib le time correction can be done. For finer adjustment, use the procedure in the pre vious section "Time Correction," f or which the delay steps are 0.
10 -EN Setting the MX Mode MX (Media Xpander) makes v ocals or instr uments sound distinct regardless of the music source. The radio , CD , and MP3, will be able to reproduce the music clearly ev en in cars with a lot of road noise. 1 Press the MX button to select MX ON.
11 -EN Quic k Searc hing Function Y ou can easily select trac ks and files. 1 Press the SOURCE b utton to set the desired source mode. ( CD mode is e xplained here as an example) 2 When setting the CD mode, press and hold the Q. S. button f or at least 2 seconds.
12 -EN Displa ying the Title/T ext It is possible to displa y the CD/Station title if the title has been pre viously inputted. For details , see “ Titling Disc/ Stations ” (page 13). T ext inf or mation, such as the disc name and the tr ack name, will be displa yed if pla ying a CD te xt compatible disc.
13 -EN Titling Discs/Stations It is possible to title y our f avorite CD's or radio stations . Y ou cannot input titles on MP3 discs (Except when a changer is connected). 1 Press the TITLE button and select the title displa y mode. F or details, see “ Displaying the Title/T ext ” (page 12).
14 -EN Switching the T uner Mode The CD A-7995/CDA-7894/CD A-7893/CD A-7892 incor porates the MAX TUNE SQ for the highest quality tuner audio . Moreov er , you can choose between two settings to suit your own personal sound pref erences and usage. 1 Press and hold the SETUP button f or at least 3 seconds.
15 -EN Sound (Beep) Guide Function This function will giv e audible f eedback with v ar ying tones depending upon the button pressed. 1 Press and hold the SETUP b utton for at least 3 seconds. 2 Press the f UP or g DN b utton to select “ BEEP . ” 3 Press the B AND button to toggle the mode between BEEP ON and BEEP OFF .
16 -EN SETUP Operation B AND g DN f UP SETUP Rotary encoder Connecting to an External Amplifier (CD A-7894/CD A-7893/CD A-7892 only) When an external amplifier is connected, sound quality can be improv ed by stopping the po wer supply of the buit-in amplifier .
17 -EN Adjusting Displa y Contrast (CD A-7995 only) Y ou can adjust the displa y contrast f or better visibility . 1 Press and hold the SETUP button f or at least 3 seconds. 2 Press the f UP or g DN button to select “ CONTRAST . ” 3 T ur n the Rotary encoder to adjust the contrast of the display .
18 -EN Radio Operation SOURCE B AND g DN f UP TUNE/A.ME Preset buttons (1 thr ough 6) Manual T uning 1 Press the SOURCE b utton until a radio frequency appears in the displa y . 2 Press the B AND button repeatedly until the desired radio band is displa yed.
19 -EN A utomatic Memor y of Station Presets 1 Press the SOURCE b utton to select the radio mode. 2 Press the B AND button repeatedly until the desired radio band is displa yed. 3 Press and hold the A. ME button f or at least 2 seconds. The frequency on the displa y continues to change while the automatic memory is in progress.
20 -EN CD Play er Operation SOURCE c - / J Insert a disc with the label side facing up. 2 Inser t a disc with the label side facing up . The disc will be pulled into the unit automatically . The mov able displa y will close and pla yback will begin. When a disc is already inser ted, press the SOURCE button to s witch to the CD mode.
21 -EN On handling Compact Discs (CD/CD-R/ CD-R W) • Do not touch the surf ace. • Do not e xpose the disc to direct sunlight. • Do not affix stick ers or labels and do not wr ite on the surf ace. • Clean the disc when it is dusty . • Make sure that there are no b umps around the disc.
22 -EN Contr olling CD Changer (Optional) An optional 6-disc or 12-disc CD Changer ma y be connected to the CD A-7995/CD A-7894/CDA-7893/CD A- 7892 if it is Ai-NET compatible.
23 -EN Multi-Changer Selection Alpine's Ai-NET system will suppor t up to 6 CD Changers. When operating two or more changers , the KCA-400C (Multi-Changer Switching de vice) must be used. If you use 1 Switching de vice, you can connect up to 4 CD Changers.
24 -EN Playing MP3 Files (CD A-7995/CD A-7894 only) The CD A-7995/CD A-7894 models include a built-in MP3 unit. Y ou can pla y CD-ROMs, CD-Rs , and CD-RWs containing MP3 files on this unit. Use the f or mat compliant with ISO 9660 le vel 1 or le vel 2.
25 -EN M.I.X. (Random Play) 1 Press the M.I.X. button in the pla y or pause mode. The files on the disc will be play ed back in a random sequence. T o cancel M.I.X. play , press the M.I.X. b utton again to tur n off the M.I.X. NO TES • If an MP3 compatible CD changer wit h the ALL M.
26 -EN Setting the Range of MP3 File Selection Y ou can set the r ange of MP3 file selection to “entire disc contents” or “f older contents only . ” 1 Press and hold the SETUP b utton for at least 3 seconds. 2 Press the f UP or g DN b utton to select DISC/ FOLDER (file selection range).
27 -EN • Supported playback sampling rates and bit rates Sampling rates: 8 kHz - 44.1 kHz, bit rates: 8 - 320 kbps Note that f or sampling rates such as 11,025 kHz, this de vice ’ s frame display (P age 12) may not displa y correctly . • ID3 tags This de vice suppor ts ID3 tag v1.
28 -EN XM Radio Operation SOURCE Preset buttons (1 thr ough 6) BAND CA T f UP g DN SETUP 3 Press the g DN or f UP b utton to select the desired channel.
29 -EN Storing XM Channel Presets 1 Press the B AND button to select the desired band (XM1 or XM2) you w ant to store. 2 After tuning in the desired channel, press and hold any one of the Preset buttons (1 thr ough 6) that you w ant to store the station on f or at least 2 seconds.
30 -EN Remote Contr ol Opera tion 8 g DN Button Radio mode: SEEK (DN) Button CD mode: Press the button to go bac k to the beginning of the current trac k. 9 f UP Button Radio mode: SEEK (UP) Button CD mode: Press the button to adv ance to the beginning of the ne xt track.
31 -EN Battery Replacement Applicable battery: Use two “AAA” sized dr y batter ies or equivalent. 1 Opening the battery cover Slide out the battery cover while firmly pressing the direction of arrow . 2 Replacing the battery Put the batteries in the case obser ving the polarities as illustrated.
32 -EN Inf or ma tion CD CD Player/Changer not functioning. • Out of operating temperature range +50˚C (+120˚F) for CD. - Allow the vehicle's interior (or trunk) temperature to cool. CD pla yback sound is wavering. • Moisture condensation in the CD Module.
33 -EN Indication f or CD Player • Protective circuit is activated due to high temperature. - The indicator will disappear when the temperature returns to within operation range. • No CD is inserted. - Insert a CD. • Although a disc is inserted, “ NO DISC ” is displayed and the unit does not start to play or eject the disc.
34 -EN Indication for XM Radio Mode • The XM antenna is not connected to the XM radio module. - Check whether the XM antenna cable is attached securely to the XM radio module. • Radio is being updated with latest encryption code. - W ait until encryption code is being updated.
35 -EN Specifications FM TUNER SECTION T uning Range 87.7 – 107.9 MHz Mono Usable Sensitivity 9.3 dBf (0.8 µV/75 ohms) 50 dB Quieting Sensitivity 13.5 dBf (1.3 µV/75 ohms) Alternate Channel Selectivity 80 dB Signal-to-Noise Ratio 80 dB Stereo Separation 45 dB Capture Ratio 2.
36 -EN Installation and Connections Caution HA VE THE WIRING AND INSTALLA TION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience. T o ensure safety , always contact the dealer where you purchased this product to have the work done.
37 -EN Installation Caution When you install this unit in your car , do not remove the Detachable Front Panel. If the Detachable Front Panel is removed during installation, you might press too hard and warp the metal plate that holds it in place. 1 Slide the mounting slee ve into the dashboard.
38 -EN Installation and Connections Connections Subwoof ers T o amplifier or equalizer Ignition Ke y T o vehicle phone T o the instrument cluster illumination lead Amplifier Amplifier Amplifier Antenn.
39 -EN % Right Rear (+) Speaker Output Lead (Violet) (CD A- 7894/CD A-7893/CD A-7892 only) & Left Rear (+) Speaker Output Lead (Green) (CD A- 7894/CD A-7893/CD A-7892 only) ( Left Rear ( – ) Spe.
40 -EN.
LIMITED W ARRANTY ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or Alpine at one of the telephone numbers listed below.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Alpine CDA-7893 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Alpine CDA-7893 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Alpine CDA-7893, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Alpine CDA-7893 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Alpine CDA-7893, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Alpine CDA-7893.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Alpine CDA-7893. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Alpine CDA-7893 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
