Manuel d'utilisation / d'entretien du produit Patch 86261-04 du fabricant Allied Telesis
Aller à la page of 24
Simply connecting the world Patch Release Note Patch 86261-04 For Rapier and A T -8800 Series Switches Intr oduction This patch rel ease note lists the issues addres sed and enhancements made in patch 86261-04 for Software Release 2.6.1 on existing models of Rapier and A T-8800 Series switches .
2 Patch Release Note Patch 86261-04 for Software R elease 2.6.1 C613-10386- 00 REV D Some of the issues addresse d in this Re lease Note include a level number .
Patch 86261-04 For Rapier and A T -8800 Serie s Switches 3 Patch 86261-04 for Software R elease 2.6.1 C613-10386 -00 REV D The server string was not copied correc tly into an HTTP file r equest when loading information fr om the configura tion scri pt.
4 ADD IGMPSNOOPING ROUTERADD RESS Patch Release Note Patch 86261-04 for Software R elease 2.6.1 C613-10386- 00 REV D This PCR introduces an enhancement that extends an issue that was resolved in PCR 03890, in which switch port entries are only cr eated for special r outer multicast addr esses.
Patch 86261-04 For Rapier and A T -8800 Series Switches SHOW IGMPSNOOPING ROUTERADDRESS 5 Patch 86261-04 for Software R elease 2.6.1 C613-10386 -00 REV D DELETE IGMPSNOOPING ROUTERADDRESS Syntax DELETE IGMPSNOOPING ROUTERADDRESS=ipaddr[,...] where • ipaddr is a reserved IP multicas t addres s in dotted decimal notation.
6 SHOW IGMPSNOOPING ROUTERADDRE SS Patch Release Note Patch 86261-04 for Software R elease 2.6.1 C613-10386- 00 REV D The firewall s ent an erroneous IPSP OOF attack message when pr ocessi ng lar ge packets.
Patch 86261-04 For Rapier and A T -8800 Series Switches SHOW IGMPSNOOPING ROUTERADDRESS 7 Patch 86261-04 for Software R elease 2.6.1 C613-10386 -00 REV D The curr ent implementation of RSTP conforms to the IEEE standar d 802.
8 SHOW IGMPSNOOPING ROUTERADDRE SS Patch Release Note Patch 86261-04 for Software R elease 2.6.1 C613-10386- 00 REV D This PCR enhances the robustness of the 802.1x port authentication protocol. If a device had IPSec and fir e wall enab led, it could not handle long ICMP packets even when enhanced fragme nt handling was enabled on the firewal l.
Patch 86261-04 For Rapier and A T -8800 Series Switches SHOW IGMPSNOOPING ROUTERADDRESS 9 Patch 86261-04 for Software R elease 2.6.1 C613-10386 -00 REV D A device in a supplicant role failed to auth enticate if it used EAP-M D5 encryption with W indows 2000 or 2 003 Server as the RADIUS server .
10 SHOW IGMPSNOOPING ROUTERA DDRESS Patch Release Note Patch 86261-04 for Software R elease 2.6.1 C613-10386- 00 REV D The entry for the FanAndP s group in the private MIB did not return vali d information. This issue has been r esolved. On A T -8848 switches, a S TP loop occurr ed if the Gigabit uplink port 49 was in the blocking state.
Patch 86261-04 For Rapier and A T -8800 Series Switches SHOW IGMPSNOOPING ROUTERADDRESS 11 Patch 86261-04 for Software R elease 2.6.1 C613-10386 -00 REV D The time re corded when a user logged in was overwritten when the same user logged in a second time while th e original connection was still active.
12 SHOW IGMPSNOOPING ROUTERA DDRESS Patch Release Note Patch 86261-04 for Software R elease 2.6.1 C613-10386- 00 REV D The IP version of packets was not bein g checked, so an IPv4 packet could match an IPv6 IPSec policy . This issue has been resolved.
Patch 86261-04 For Rapier and A T -8800 Series Switches SHOW IGMPSNOOPING ROUTERADDRESS 13 Patch 86261-04 for Software R elease 2.6.1 C613-10386 -00 REV D The AUTHENTICA TION parameter has been removed from the “?” CLI help for firewall commands. This was not a valid parameter .
14 SHOW IGMPSNOOPING ROUTERA DDRESS Patch Release Note Patch 86261-04 for Software R elease 2.6.1 C613-10386- 00 REV D BGP did not always send With dr a wn advertisements when a route went down. This issue has been resolved. The output of the SHOW SYSTEM co mmand has been changed on A T -8800 Series switches.
Patch 86261-04 For Rapier and A T -8800 Series Switches SHOW IGMPSNOOPING ROUTERADDRESS 15 Patch 86261-04 for Software R elease 2.6.1 C613-10386 -00 REV D When two devices ar e BSR candidates, and hav.
16 SHOW IGMPSNOOPING ROUTERA DDRESS Patch Release Note Patch 86261-04 for Software R elease 2.6.1 C613-10386- 00 REV D When the interval between the NTP ser ver and client exceeded 34 years 9 days and 10 hours, the time set on the client was incorrect.
Patch 86261-04 For Rapier and A T -8800 Series Switches SHOW IGMPSNOOPING ROUTERADDRESS 17 Patch 86261-04 for Software R elease 2.6.1 C613-10386 -00 REV D Files with lines over 132 characters in length could not be transferred using TF TP . This limit has now been raised to 1000 cha racters to match the maximum command line length.
18 SHOW IGMPSNOOPING ROUTERA DDRESS Patch Release Note Patch 86261-04 for Software R elease 2.6.1 C613-10386- 00 REV D Rapier Series switches with a DC power supply did not r ecognise the DC power supply .
Patch 86261-04 For Rapier and A T -8800 Series Switches SHOW IGMPSNOOPING ROUTERADDRESS 19 Patch 86261-04 for Software R elease 2.6.1 C613-10386 -00 REV D When a connector was plugged into one physical int erface, the RIPng request packe t was err oneously transm itted from all interfaces on the switch.
20 SHOW IGMPSNOOPING ROUTERA DDRESS Patch Release Note Patch 86261-04 for Software R elease 2.6.1 C613-10386- 00 REV D A T -8800 series switches received fr ames when the physical link was not established.
Patch 86261-04 For Rapier and A T -8800 Series Switches SHOW IGMPSNOOPING ROUTERADDRESS 21 Patch 86261-04 for Software R elease 2.6.1 C613-10386 -00 REV D The CREA TE CONFIG command did not generate the TYPE pa rameter for ADD IPV6 INTERF ACE commands.
22 SHOW IGMPSNOOPING ROUTERA DDRESS Patch Release Note Patch 86261-04 for Software R elease 2.6.1 C613-10386- 00 REV D A fatal err or sometimes occurred when ce rtain types of traf fic travelled over a W AN interface connected to the Internet. This is sue has been r esolved.
Patch 86261-04 For Rapier and A T -8800 Series Switches SHOW IGMPSNOOPING ROUTERADDRESS 23 Patch 86261-04 for Software R elease 2.6.1 C613-10386 -00 REV D MAC address are now deleted from the all the internal tables for ports where the learn limit has been exceeded.
24 SHOW IGMPSNOOPING ROUTERA DDRESS Patch Release Note Patch 86261-04 for Software R elease 2.6.1 C613-10386- 00 REV D.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Allied Telesis Patch 86261-04 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Allied Telesis Patch 86261-04 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Allied Telesis Patch 86261-04, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Allied Telesis Patch 86261-04 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Allied Telesis Patch 86261-04, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Allied Telesis Patch 86261-04.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Allied Telesis Patch 86261-04. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Allied Telesis Patch 86261-04 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
