Manuel d'utilisation / d'entretien du produit MP 101 du fabricant Extron electronic
Aller à la page of 47
User ’ s Manual Micr ophone to Line Pr eamplifi er s 68-992-02 Rev . A 05 09 MP 101 Series.
Pr ecautions This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product’ s enclosure that may present a risk of electric shock.
FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
i MP 101 Series • T able of Contents T able of Contents Chapter One • Intr oduction ................................................... 1-1 About this Manual .................................................................... 1-2 About the MP 101, MP 101 AAP , and MP 101 D .
ii MP 101 Series • T able of Contents T able of Contents 68-992-02 Rev . A 05 09 All trademarks mentioned in this manual are the properties of their respective owners. Chapter Four • MP 101 D .......................................................
MP 101 Series 1 Chapter One Intr oduction About this Manual About the MP 101, MP 101 AAP , and MP 101 D Features.
1-2 MP 101 Series • Introduction Intr oduction About this Manual This manual contains information about the MP 101, the MP 101 AAP , and the MP 101 D micr ophone to line preamplifi ers and pr ovides instructions on how to mount and operate these units.
1-3 MP 101 Series • Introduction Flexible mounting options — The MP 101 can be mounted on a rack, on a table, or under furniture. The MP 101 AAP mounts into various Extron ar chitectural pr oducts. The MP 101 D is wall mountable using standar d, of f-the-shelf mounting accessories.
MP 101 Series 2 Chapter T wo MP 101 Rear Panel Features Front Panel Features Mounting the MP 101 Adjusting the MP 101 Remote Control.
2-2 MP 101 Series • MP 101 MP 101 The Extron MP 101 is a high performance, microphone to line level audio preamplifi er . Rear Panel Featur es 2 1 3 5 4 PO WER 12V 0.5A MAX MIC INPUT REMOTE V OL/MUTE MP 101 MIC TO LINE PREAMPLIFIER 10V LINE OUTPUT Power input a Power — Plug the external 12 VDC power supply into this 2-pin, 3.
2-3 MP 101 Series • MP 101 P ower Supply Output Cord Orange Captiv e Screw Connector 3/16" (5 mm) Max SECTION A–A Ridges Smooth AA Tie Wrap N Y our MP 101 may have shipped with a blue captive screw plug. The blue connector does not have the extended tail or the included tie-wrap.
2-4 MP 101 Series • MP 101 MP 101, cont’d Remote connection d Remote — An optional 3-pin, captive scr ew connector allows a wall mounted audio controller or MediaLink pr oduct to remotely contr ol volume and mute levels for the MP 101 unit. See “Remote Control”, later in this chapter , for more information.
2-5 MP 101 Series • MP 101 Mounting the MP 101 There ar e many optional accessories for mounting the MP 101. They include the following: Projector mounting options • PMK 100 Mini Projector (part #.
2-6 MP 101 Series • MP 101 MP 101, cont’d Rack installation The MP 101 can be rack mounted using either the V ersaT ools 19" 1U rack shelf (part # 60-190-20 ), basic V ersaT ools rack shelf (part # 60-604-20 ), a standard universal 1U rack shelf (part # 60-190-01 ), or a 1U basic rack shelf (part # 60-604-01 ).
2-7 MP 101 Series • MP 101 Use 2 mounting holes on opposite corners. (2) 4-40 x 3/16" Screws 1U Universal Rac k Shelf Both front f alse f aceplates use 2 screws .
2-8 MP 101 Series • MP 101 MP 101, cont’d Outside Inside Fur nitur e mounting In addition to using the MP 101 on a rack, you can mount it on furniture using the optional MBU Mini Under -Desk Mount Kit (part # 70-212-01 ). T o use this option, do the following: 1.
2-9 MP 101 Series • MP 101 b. At each mark, drill a 3/32" (2 mm) diameter pilot hole approximately 0.25" (6 mm) deep in the mounting surface. c. Insert provided #8 wood scr ews into the four pilot holes. T ighten each screw into the mounting surface until just less than 0.
2-10 MP 101 Series • MP 101 MP 101, cont’d Remote Contr ol The wiring and control options described below pertain to all models in the MP 101 series. Remote connector wiring As shown below , Pin 1 is 10 VDC reference voltage. Pin 2 is volume control DC voltage; range is 0 to 10 V , wher e 0 V is mute and 10 V provides maximum volume.
MP 101 Series 3 Chapter Thr ee MP 101 AAP Rear Panel Features Front Panel Features Adjusting the MP 101 AAP Mounting the MP 101 AAP Remote Control.
3-2 MP 101 AAP MP 101 Series • MP 101 AAP The Extron MP 101 AAP is a high performance micr ophone to line level audio preamplifi er . The three models ar e two-space MP 101 AAPs in black, white, and RAL 9010 (Eur owhite). Rear Panel Featur es PO WER 12V 0.
3-3 MP 101 Series • MP 101 AAP b Phantom power switch — Provides switchable 48 volt phantom power for condenser microphones. Audio output (line level) c Line Output — A 3-pin, captive scr ew connector outputs to audio mixers, amps switchers, or other non-microphone audio equipment.
3-4 MP 101 AAP , cont’d MP 101 Series • MP 101 AAP 3-pin Female 2 3 1 b Mic Gain — A r ecessed, adjustable potentiometer defi nes the amount of input signal (between 25 and 72 dB) allowed into the preamp. This potentiometer is covered by a plastic cap to avoid tampering.
3-5 MP 101 Series • MP 101 AAP level that is free of distortion. N If there is a r emote contr ol connection, unplug it while adjusting the Mic Gain potentiometer .
3-6 MP 101 AAP , cont’d MP 101 Series • MP 101 AAP 4 . Repeat steps 1 through 3 to mount any other AAPs. Cover any openings in the faceplate with blank plates (provided). 5. If it was not done previously , adjust the MP 101 AAP fr om its rear panel.
3-7 MP 101 Series • MP 101 AAP Remote contr ol options The MP 101 AAP has thr ee r emote contr ol options: 1. The Extron VCM 100 volume/mute contr oller and VC 50 volume controller use a 10 k ohm potentiometer as the main method for controlling volume levels.
MP 101 Series 4 Chapter Four MP 101 D About the MP 101 D Rear Panel Features Front Panel Features Adjusting the MP 101 D Mounting the MP 101 D Remote Control.
4-2 MP 101 D MP 101 Series • MP 101 D About the MP 101 D The Extron MP 101 D provides the same featur es as the other MP 101 models in a convenient, Decora ® style wallplate. Like the MP 101 and MP 101 AAP , this mic to line preamplifi er can be remotely contr olled via a VCM volume/mute contr ol module.
4-3 MP 101 Series • MP 101 D N Do not tin the stripped power supply leads before installing the captive screw connector . T inned wir es ar e not as secure in the captive scr ew connectors and could pull out. W The two power cord wires must be kept separate while the power supply is plugged in.
4-4 MP 101 D, cont’d MP 101 Series • MP 101 D Fr ont Panel Featur es MIC IN ACTIVE MUTE 1 2 3 4 a Active LED — This LED lights green to indicate that the unit is receiving power .
4-5 MP 101 Series • MP 101 D 3-pin Female 2 3 1 Adjusting the MP 101 D Adjustment options for the MP 101 D ar e located on its r ear panel (see “Rear Panel Features” in this chapter for details). Therefor e, you must perform these adjustments befor e mounting into a wall.
4-6 MP 101 D, cont’d MP 101 Series • MP 101 D N Before mounting, the MP 101 D should be tested to verify that its connections and settings are corr ect. T o mount the MP 101 D into a Decora faceplate, do the following: 1. Secure all cables and connections onto the MP 101 D.
4-7 MP 101 Series • MP 101 D installation information, refer to the installation guide shipped with the Decora faceplate. Remote Contr ol Remote connector wiring Pin 1 is 10 VDC refer ence voltage. Pin 2 is volume contr ol DC voltage; range is 0 to 10 V , where 0 V is mute and 10 V pr ovides maximum volume.
MP 101 Series 5 Chapter Five Ar chitectural Installation Installation Instructions Preparing the Site and Installing the Wall Box.
5-2 Ar chitectural Installation MP 101 Series • Architectural Installation Installation Instructions T wo versions of the MP 101 series, the MP 101 AAP and MP 101 D , can be mounted into furniture, a wall, or an Ackermann fl oor box.
5-3 MP 101 Series • Architectural Installation • If the MP 101 will be installed without a wall box (using mud rings or fastening it directly to the wall or furniture), measur e and mark the surface for the cutout area indicated in the template. 3.
5-4 MP 101 Series • Architectural Installation Ar chitectural Installation, cont’d • If the MP 101 AAP or MP 101 D are being installed in a two- or four-gang AAP plate, attach the wall box to the wall stud or furniture with nails or scr ews, leaving the front edge fl ush with the outer wall or furnitur e surface.
MP 101 Series A Appendix A Specifi cations, Part Numbers, and Accessories Specifi cations Included Parts Optional Accessories.
A-2 Specifi cations, Part Numbers, and Accessories MP 101 Series • Specifi cations, Part Numbers, and Accessories Specifi cations Audio Gain ................................................ Adjustable, +25 dB to + 72 dB Frequency r esponse ......
A-3 MP 101 Series • Specifi cations, Part Numbers, and Accessories General External power supply ................. 100 V AC to 240 V AC, 50/60 Hz, external, autoswitchable; to 12 VDC, 1 A, regulated Power input requir ements ........... 12 VDC, 0.3 A T emperature/humidity .
A-4 Specifi cations, Part Numbers, and Accessories MP 101 Series • Specifi cations, Part Numbers, and Accessories Shipping weight ........................... 2 lbs (1 kg) V ibration ........................................ IST A 1A in carton (International Safe T ransit Association) Listings.
A-5 MP 101 Series • Specifi cations, Part Numbers, and Accessories Included Parts These items are included with each MP 101 unit: Included parts Part number MP 101 Micr ophone to Line Pr eamplifi er 60-718-10 PS 121C: universal 12 VDCm, 1.
A-6 Specifi cations, Part Numbers, and Accessories MP 101 Series • Specifi cations, Part Numbers, and Accessories These items are included with each MP 101 D unit: Included parts Part number MP 101 D Micr ophone to Line Pr eamplifi er (one of the following two): Black or 60-822-12 White 60-822-22 Power supply: universal 12 VDC, 1.
MP 101 Series B Appendix B Dimensions and T emplate for the MP 101 D Dimensions T emplate.
B-2 Dimensions and T emplate MP 101 Series • Dimensions and T emplate for the MP 101 D Dimensions N Always check and go by the dimensions given in this appendix. 2X .094± .005 2X .125 2X #6-32 UNC-2B .000 .622 1.095 1.455 2X 1.755 2.420 2.610 .150 2X .
B-3 MP 101 Series • Dimensions and T emplate for the MP 101 D T emplate 4.50" (11.43 cm) Cut Out Line for Installing the Electrical Bo x T op P anel 2.
Extr on’ s W arranty Extron Electr onics warrants this pr oduct against defects in materials and workmanship for a period of three years fr om the date of pur chase.
© 2009 Extron Electr onics. All rights reserved. Extr on US A - Wes t Headquarters +800. 633.98 76 Inside USA / Canada Only + 1 .714.491 .1 500 + 1 .714.491 .1 51 7 FA X Extr on US A - Ea s t +800. 633.98 76 Inside USA / Canada Only +1. 9 19 . 8 6 3 .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Extron electronic MP 101 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Extron electronic MP 101 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Extron electronic MP 101, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Extron electronic MP 101 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Extron electronic MP 101, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Extron electronic MP 101.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Extron electronic MP 101. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Extron electronic MP 101 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
