Manuel d'utilisation / d'entretien du produit AT-8000S du fabricant Allied Telesis
Aller à la page of 48
613-001106 Rev C Layer 2 Ethernet Switch Allied Telesis AT-8000S Installation Guide A T -8000S Series Stackable Gigabit Ethernet Switches.
Copyright 2011 Allied Telesis, Inc. All rights reserved. No part o f this pub lication may be repro duced without prior wr itten permission from Al lied Telesis, Inc. Allied Telesis and the Allied Telesis logo are trademarks of Allied Tele sis, Incorporated.
T able of Content s Page 3 T able of Content s Preface ........................................................ ..................................................... ....................... 6 How This Guide is Organized .............. ................
Allied T elesis A T -8000S Switch Switch In st a llation Guide Page 4 Stacking .................................................. ..................................................................... ......... 30 Understanding the Stack Topology .....
T able of Content s Page 5.
Page 6 Allied T elesis A T -8000S Switch Inst allation Guide Preface This guide contains the hardware installation instruction s for the A T -8000 S/16, A T -8000S/24, A T -8 000S/24POE, A T -800 0S/48 and A T -8000S/48 POE Fast Ethernet Switches.
Contacting Allied T elesis Page 7 Cont acting Allied T elesis This section provid es Allied T elesis contact information for technical support as well as sales or corporate information. Online Supp or t Y ou can request technical support online by acce ssing the Allied T elesis Knowledge Base from the following web site: www .
Page 8 Allied T e lesis A T -80 00SSwitch Switch Inst allation Guide Chapter 1. Product Description The new A T -8000S series combines the best of th e previous L2 seri es; stackability and affordability . The new A T -8000S series is an entry level managed swit ch for the SMB, Small Offi ce/Field Of fice offering managed desktop connectivity .
Product Descriptio n Page 9 Features The A T-8000S/16, A T -8000S/24, A T -8000S/24POE, A T - 8000S/48 and A T -8000S/48POE feature s include the following: • Wirespeed switching traffic across all ports • Auto MDI/MDIX enabled • 802.1d, 1w , 1s priority tags supported • Broadcast storm control • IEEE 802.
Page 10 Allied T e lesis A T -80 00SSwitch Switch Inst allation Guide A T -8000S/16 Front Panel The following figure illustrates the A T -8000S/16 front panel. Figure 1: A T -8000S/16 Front Panel The A T-8000S/16 front p anel is configured as follows: • 16 10/100Mbps Ports — RJ-45 port s designated as 10/100Base-T .
Product Descriptio n Page 1 1 A T -8000S/24 Front Panel The following figure illustrates the A T -8000S/24 front panel. Figure 3: A T -8000S/24 Front Pane l The A T-8000S/24 front p an el is configured as follows: • 24 10/100Mbps Ports — RJ-45 port s designated as 10/100Base-T .
Page 12 Allied T e lesis A T -80 00SSwitch Switch Inst allation Guide A T -8000S/24POE Front Panel The following figure illustrates the A T -8000S/24POE front panel. Figure 5: A T -8000S/24POE Front Panel The A T-8000S/24POE front p a nel is configured as follows: • 24 10/100Mbps Ports — RJ-45 port s designated as 10/100Base-T .
Product Descriptio n Page 13 A T -8000S/48 Front Panel The following figure illustrates the A T -8000S/48 front panel. Figure 7: A T -8000S/48 Front Pane l The A T -8000S/48 device front panel is configured as follows: • 48 10/100Mbps Ports — RJ-45 port s designated as 10/100Base-T .
Page 14 Allied T e lesis A T -80 00SSwitch Switch Inst allation Guide A T -8000S/48POE Front Panel The following figure illustrates the A T -8000S/48POE front panel. Figure 9: A T -8000S/48POE Front Panel The A T -8000S/48 device front panel is configured as follows: • 48 10/100Mbps Ports — RJ-45 port s designated as 10/100Base-T .
Product Descriptio n 10/100Base-T Fast Ethernet Ports Page 15 Port s Description 10/100Base-T Fast Ethernet Port s The 10/100Base-T Fast Ethernet ports are RJ-45.
Page 16 Allied T e lesis A T -80 00SSwitch Switch Inst allation Guide Mode LEDs Selecting a particular mode determines what information is displayed on the port LED. For example, if the mode selected is "COL", then the LED on each port indicates the collision status of that port.
Product Descriptio n Port LEDs Page 17 The stacking LED indications are describ ed in the following table: Port LEDs 10/100 Base-T Fast Ethernet RJ-45 Port LEDs The following figure illustrates the port LEDs.
Page 18 Allied T e lesis A T -80 00SSwitch Switch Inst allation Guide The RJ-45 ports have two LEDs, one for Link and one for activity (Mode status for non PoE and Load status for PoE).
Product Descriptio n Port LEDs Page 19 The 1000 Base-T/Combo Ethernet RJ-45 ports have two LEDs, one for speed and one for Link and activi ty . The LED indications are described in the following table: 24/48 Port Device SFP/Combo Port LEDs The following figure illustrates the SFP/Combo port LEDs.
Page 20 Allied T e lesis A T -80 00SSwitch Switch Inst allation Guide 24/48 Port Device System LEDs There are two system LEDs, t he Power and Diagnostics LEDs. The following figure illustrates the Power and Diagnostics LEDs. Figure 16: SFP Port LEDs Power LED The PWR LED on the fro nt panel of the device indicates the power supply status.
Product Descriptio n Stacking Ports LEDs Page 21 S tacking Port s LEDs The following figure illustrates the S tacking port LEDs. Figure 17: St acking Port LEDs The RJ-45 ports have two LEDs, one is for link and one is for activity .
Page 22 Allied T elesis A T -8000S Switch Switch Inst allation Guide Chapter 2. Inst allation This section contains information for installin g the device, and includes the fo llowing sections: • Pr.
Inst allation Preparing for Installatio n Page 23 Wa r n i n g Do not work on equipment or cables during periods of lightning activity. E2 Wa r n i n g Power cord is used as a disconnection device . To de-energize equipment, disconnect the pow er cord.
Page 24 Allied T elesis A T -8000S Switch Switch Inst allation Guide Caution Installation of the equi pment in a rack should be such that the amount of air flow requi red for safe operation of the equipment is not compromised. E36 Wa r n i n g Reliable earthing of rack-mounted equi pment should be ma intained.
Inst allation Installing the Device Page 25 Package Content s While unpacking the device, ensure that the following items are included: • One A T - 800 0S/xx series unit • Rubber Feet for desktop .
Page 26 Allied T elesis A T -8000S Switch Switch Inst allation Guide Figure 18: Inst alling Rubber Feet 2. Set devi ce down on a flat surface, while leavin g 2 inches on ea ch side and 5 inches at the back.
Inst allation Connecting the Device Page 27 Figure 19: Att aching the Mount ing Bracket s 4. Insert the su pplied screws into the rack mounting holes and tighten with a screwdriver . 5. Repeat the process for the rack-mounting bracket on the other side of the device.
Page 28 Allied T elesis A T -8000S Switch Switch Inst allation Guide T o connect a terminal to the device Console port, perform the following: 1. Connect a cabl e to the terminal running VT100 terminal emulation software. 2. Ensure that the terminal emulation software is set as follows: a) Select the appropriate port to connect to the device.
Inst allation Connecting the Device Page 29.
Page 30 Allied T e lesis A T -80 00SSwitch Inst allation Guide Chapter 3. S t acking S tacking provides multiple switch manageme nt through a si ngle point as if all stack members are a single unit. All stack members are accessed via a single IP a ddress through which the stack is managed.
St acking Stacking Chain T opology Page 31 Figure 20: St acking Ring T opology Most difficulties incurred in Ring topologies occur when a device in the ring becomes non-functional, or a link is severed. In a stack, the system auto matically switches to a S tacking Fa ilover topology wi thout any system downtime.
Page 32 Allied T e lesis A T -80 00SSwitch Inst allation Guide Configuring S tacking Configuring stacking is performed duri ng the bootup process. T o c onfigure a d evice as part of a stack, the bootup process must be interrupted straight after the Power On Self T est (POST).
St acking Configuring Stacking Page 33 The S tartup Menu is displayed and contai ns the foll owing configuration fu nctions: 6. From the St artup Me nu, press “6”. The following prompt is displayed: 7. From the S tack Menu, pr ess “2”. The following prompt is displayed: 8.
Page 34 Allied T e lesis A T -80 00SSwitch Inst allation Guide Chapter 4. Initial Configuration Configuration Overview Before assigning a static IP address to the device, obtain the following informat.
Initial Configuration Configuration Page 35 Note 100.1.1.254 is the IP address of the defaul t gateway that is used to reach the management network 101.101.0.0. T o check the configuration, enter the command “show ip interface” as illustrated in the following example .
Page 36 Allied T elesis A T -8000S Switch Inst allation Guide Chapter 5. T roubleshooting This chapter contains information on how to troubles hoot the switch in the event that a problem occurs. Note If you are still unable to resolve the problem after following the instructio ns in this chapter, contact ATI Technical Support for assistan ce.
T roubleshootin g Page 37.
Page 38 Allied T elesis A T -8000S Switch Inst allation Guide Appendix A. T echnical S pecifications Physical Specifications The different devices have the following physical specifications: • A T-8000S/16 + 1G — 330 x 230.5 x 43.2 mm (W x D x H) • A T-8000S/24 + 2G — 440 x 257 x 43.
Te c h n i c a l S p ecifications Page 39 Compliance S tandards The devices conform to the following comp liance standards: • The Environmental standard, per A TI QL T 122 0 • RoHS compliant • The EN50082-1 i mmunity standard • The following safe ty standards: – UL1950 – CSA22.
Page 40 Allied T elesis A T -8000S Switch Inst allation Guide 3 TxRx 2+ 4 TxRx 3+ 5 TxRx 3- 6 TxRx 2- 7 TxRx 4+ 8 TxRx 4- T able 9: RJ-45 Pin Connections for 10/100/1000 Base-T Pin Use.
Te c h n i c a l S p ecifications Page 41.
Page 42 Allied T e lesis A T -80 00SSwitch Inst allation Guide Appendix B. Safety S t atement s Important: This appendix contains multi ple-language transla tions for the safety statements in this guide . Wicht ig: Dieser Anhang enthält Übersetzungen de r in dies em Handbuch enth altenen Sicherheitshinweise in mehreren S prachen.
Safety St a tements Electrical Safety Notices Page 43 Wa r n i n g 5. Power cord is used as a disconnection de vice. To de-energize equipmen t, disconnect the power cord. Wa r n i n g 6. Class I Equipment. This equipment must be ea rthed. The power plug must be conne cted to a properly wired earth grounded socket ou tlet.
Page 44 Allied T e lesis A T -80 00SSwitch Inst allation Guide Wa r n i n g 13. Do not strip more than the recommended amount of wire. Stripping more than the recommended amount can create a safety hazard by leaving expo sed wire on the terminal block after installation.
Safety St a tements Electrical Safety Notices Page 45 Wa r n i n g 23. The power so urce for the gateway unit should be lo ca ted near the unit and should be easil y accessible.
Page 46 Allied T e lesis A T -80 00SSwitch Inst allation Guide Wa r n i n g 30. Remove all metal je welry, such as rings and watche s, before instal ling or removing a line card from a powered-on chassis. Wa r n i n g 31. Use dedicated power circuits or power conditioners to supply reliable electrical power to the device .
Safety St a tements T e lecommunicatio ns Complian ce Notices Page 47 Caution 39. If installed in a closed or multi-unit rack assembly, the operati ng ambient temperature of the rack environment may be greater than th e room ambient temperature.
Page 48 Allied T elesis A T -8000S Switch Inst allation Guide Index Numerics 10/100Base-T 15 1000Base-T 15 A AT-8000S/16 10 AT-8000S/24 11 AT-8000S/24POE 12 AT-8000S/48 13 AT-8000S/48POE 14 Autoboot 3.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Allied Telesis AT-8000S c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Allied Telesis AT-8000S - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Allied Telesis AT-8000S, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Allied Telesis AT-8000S va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Allied Telesis AT-8000S, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Allied Telesis AT-8000S.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Allied Telesis AT-8000S. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Allied Telesis AT-8000S ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
