Manuel d'utilisation / d'entretien du produit Metro du fabricant Exmark
Aller à la page of 44
.
i WA RNING The engine exhaust f rom this pr oduct contains chemicals k now n t o the State of Califor nia to cause cancer, birth def ects, or other r eproductive harm. IMPORTANT W hen the m ow er is used or operated on any Califor nia forest, brush or grass covered land, a work ing spark ar rester must be at tached to the muf fler.
ii EXMARK PA RTS PLUS PROGRA M EFFECTIVE DATE: September 1, 1995 Program If your Ex mark dealer does not have the Exmark part in stock, Exmark w ill get the parts to the dealer the next business day or the part will be FREE* Guaranteed!! How the Program Works 1.
iii CONGRAT ULATIONS on the purchase of your Exmark Mow er . This product has been caref ully designed and manufactur ed to give you a maximum amount of dependability and years of tr ouble-free oper ation. OPERA TOR'S MA NUA L This manual cont ains assembly, operating, m aintenance, adjustm ent and safety instructi ons for your Ex mark mower.
iv TA BLE OF CONTENTS 1. SA FETY PA GE 1.1 Sa f ety Alert Sy mbol ............................................................................... 1 1.2 Trai ning .........................................................................................
- 1 - 1. SA FETY 1.1 SA FETY A LERT SYMBOL THIS SA FETY A LERT SYMBO L IS US ED BOT H IN TH IS MA NUA L A ND ON T HE MA CHINE TO IDENT IFY IMPOR TA NT SA FET Y MESSA GES WHICH MUST BE FOLLOWED TO AVOID A CCI DENTS.
- 2 - WA RNING POTENT IAL HAZARD ♦ Engine exhaust contains carbon m onoxide, w hich is an odorless deadly poison. W HAT CAN HAPPEN ♦ Carbon monoxide can kill you and is also known to t he State of California t o cause birth defect s.
- 3 - DA NGER POTENT IAL HAZARD ♦ In certain condit ions gasoline is extremely flam mable and highly explosive. W HAT CAN HAPPEN ♦ A static charg e can ignite g asoline vapors. A fire or explosion from g asoline can burn you, others, and cause property damag e.
- 4 - is responsible f or safe operat ion on slopes. See inside back cover to determ ine the approximate slope ang le of the area t o be mowed. 1.4.5 Stop the blades when crossing surf aces other than g rass, if mower must be tilted for transportation, and when transpor ting the mower to and f rom the area t o be mowed.
- 5 - 1.5.4 Store f uel in a container specif ically designed for th is purpose. Store the f uel container in a cool, dr y place. 1.5.5 Keep the mower and fuel cont ainer in locked storag e to prevent children f rom playing or tam pering with them. 1.
- 6 - PART NO. 403143 LOCATI ON: Right Rear of Engine Deck KOHLER, 13 HP KAW , & 10.5 B&S PART NO. 323688 LOCATI ON: Console 12.5 HP KAW , KOHLER & 10.5 HP B&S PART NO. 323689 LOCATI ON: RH Side of Console 15 & 17 hp KAW PART NO. 323691 LOCATI ON: RH Side of Con sole 15 & 17 HP KAW PART NO.
- 7 - 2. SPECIFICA TIONS 2.1 MODEL NUMBE R: Serial Nos. 220, 000 & Higher M3211B; M 3213KA; M3613KA; M3613KC; M3615KA; M 4815KC; M 4815KA; M 4817KA 2.2 ENGINE 2.2.1 Engine Specif ications: See your engine owner's manual. 2.2.2 RPM (No Load): 3600 rpm 2.
- 8 - 2.6.2 Speed range: 1st 2.0 mph (3. 22 km/h) 4th 4.1 mph (6. 60 km/h) 2nd 2.7 mph (4. 35 km/h) 5th 6.2 mph (9. 98 km/h) 3rd 3.5 mph (5. 63 km/h) Rev 3.1 mph (4.99 km /h) 2.7 WHEEL DRIVE SY STEM Banded double A-Section V-belt s, single top- side idlers and replaceable bolt-on dr ive sheaves and brake drums.
- 9 - 2.11 TORQUE RE QUIREMENTS BOLT LO CATION TORQ UE Blade/Cu tter Housing Spindle B olt ....................................75-80 ft-lbs. Caster Bracket M ounts......................................................30-35 ft-lbs. Cutter De ck /Engine De ck M ount .
- 10 - IMPORTA NT: If the mower has been compl etely assembled and the handle position is changed , it will be necessary to readj ust the drive and brake linkage. FIG. 2 UPPER HA NDLE HEIGHT A DJUSTMENT 3.8.1 Attach thr ottle cable to engine. For Kohler, Kaw asaki, and B&S 10.
- 11 - FIG 4 12.5 HP KA W A SA KI SPEED CONTROL (THROTTLE CA BLE HOO K-UP) FIG 5 B&S 10.5 HP SPEED CONTROL (THROTTLE CA BLE HOO K-UP) FIG 6 15 & 17 HP KA WASA KI SPEED CONTROL (THROTTLE CA BLE HOO K-UP) d) Pull cable upward for 12.
- 12 - e) Check t hat the choke adjust ing screw just comes in contact with the chok e lever when throttle contr ol is in the full t hrottle position. ( B&S 10.5 hp does not have a choke adjust ing screw.) Choke link should not move when throttle control is moved to the f ull thrott le position.
- 13 - FIG. 8 THIS CLEA RANCE SHOULD BE EQUA L FIG. 7 SHIFTER LEVER TO T RA NSMISS ION FIG. 9 THIS CLEA RANCE SHOULD BE EQUA L 3.8.5 Inst all and adjust wheel drive linkages. a) Screw threaded end of drive linkages int o swiv els in wheel drive idler arms.
- 14 - FIG. 11 NEUTRA L LOCK LEVER CLEA RANCE NOTE: Neutral lock/ park brake latch clearance should be checked w hen there is a slight upward f orce placed on the drive levers to remove any "slack" i n the linkage.
- 15 - 3.8.8 Route the long, unattached wiring harness lead up the lef t hand side of t he handle and connect the two leads, in any order, t o the operator presence cont rol switch terminals on t he inside of the contr ol console.
- 16 - FIG. 13 DRIVE LEVER, NEUTRA L LO CK/PA RK BRAKE LA TCH OPERA TION 4.1.4 Operator Presence Control (OPC) Levers: Located on the upper handle assem bly directly abov e t he handle grips. W hen these levers are depressed, t he OPC system senses that the oper ator is in the normal operat or's position.
- 17 - 4.1.8 Transm ission Shift Lever: Located under the cont rol console and behind the fuel t ank. It shifts the 5- speed transmission into five forward gear s, neutral and reverse. Shif t transm ission only when drive lev ers are in the neutral position.
- 18 - Do not add oil to g asoline. Do not overfill f uel tank . Never fill the f uel tank so t hat the f uel level rises abov e a level that is ½” below the bott om of the f iller neck to allow for f uel expansion and prevent f uel spillage.
- 19 - 4.3 OPERA TING INSTRUCTIONS 4.3.1 Read the Engine Owner's Manual caref ully for detailed operat ing instruct ions and maintenance reg arding the eng ine. Befor e attempting to operate the unit , refer to Section 1 (Saf ety) and follow all safet y, operating, and prepar ation guidelines as stated in t hat section.
- 20 - 4.3.4 Drive Lever/Neutral Lock/ Park Brak e Latch Operation: To lock the drive levers in “neutral” sq ueeze the drive levers back to the neut ral position. Place thum bs on the upper portion of the neutral lock /park br ake latches and move them t o the rear.
- 21 - 4.4 TRA NSPORTING WA RNING POTENT IAL HAZARD ♦ Loading the m ow er onto a trailer without str ong enough or pr operly supported ramps could be dangerous. W HAT CAN HAPPEN ♦ The ram ps could collapse causing the unit to f all, which could cause injury.
- 22 - WA RNING POTENT IAL HAZARD ♦ The engine can becom e very hot. W HAT CAN HAPPEN ♦ Touching a hot engine can cause severe burns. HOW T O AVOI D THE HAZARD ♦ Allow the engine to cool complet ely before service or making repairs around the eng ine area.
- 23 - a) Diseng age blades. b) Stop eng ine and remove spark plug wire(s) . c) Raise deck, suppor t properly using saf ety precautions. d) Clean out any grass build- up from under side of deck and in deck discharge chute. e) Inspect blades and shar pen or replace as required.
- 24 - 5.1.6 Check f or loose hardware. Serv ice Interva l: Daily a) Stop eng ine and remove spark plug wire(s) . b) Visually inspect machine f or any loose hardware or any other possible problem. T ighten or replace any hardware bef ore operating. 5.
- 25 - f) Check f or side play caused by bearing wear on the input and output shaf ts of the transm ission. Replace bearings if necessary. g) Remove the six bolts that f asten the upper case t o the lower case and caref ully remove the upper case half.
- 26 - c) Replace 5-speed gearbox g rease yearly. Use 18 oz. Of Peerless g rease (Part No. 788067). See Section 5.1.10. d) Lubricate pivot point s w it h a spray penetrating lubricant as directed below. SPRA Y LUBRICANT CHA RT PIVOT POI NTS NO. of P LA CES 32" 36" 48" SERVICE INTERVA L 1.
- 27 - 5.1.20 Dielectric gr ease is used on all blade type electrical connections to prevent corrosion and loss of contact. 5.2 A DJUSTMENTS 5.2.1 Adjusting cut ting height with blade spacers.
- 28 - FIG. 15 FIG. 16 CA ST ER HEIGH T A DJUS TMENT A XLE HEIGHT AD JUST MENT These models have f iv e ( 5) axle positions; four ( 4) 1/2" caster spacer s; one (1) 3/16" cast er spacer, and f our (4) blade spacers. NOTE: The axle positions are in 1/2" increments and the large caster spacers are 1/2" thi ck.
- 29 - b) To t ighten transmission belt , loosen the 3/8" nyloc nut on transm ission belt idler pulley. Slide bolt inward in slot and ret ighten nyloc nut. c) W hen properly adjust ed, the belt should have 1/2" of deflection with thr ee pounds of pr essure on the belt midway between the transmission and engine pulley.
- 30 - e) Check belt guide under the eng ine deck to see that it is properly set. (See Section 5.2.7) . Also check the blade brak e adjustment . (See Section 5.2.6) 5.2.6 Blade Brake Adj ustment: a) Stop engine and rem ove spark plug wire(s). b) Disengage blades.
- 31 - 5.2.11 Shift er detent adjustm ent - Transm ission shifter detent can be adjusted by adjusting the setscrew on the back side of transmission locat ed just behind the neutral star t switch.
- 32 - 5.2.15 Adjust thr ottle lever tension (B&S Engines onl y ) . a) Stop engine. b) Tension in throt tle levers can be increased or decreased by adjusting t he tightness of the lever pivot bolt which is located under the console. 6. TROUBLE SHOOTING 6.
- 33 - NOTE: A fter caref ully checking the previous steps, attempt to st art the engine. If it does not start, cont act y our aut horized Exmark service dealer.
- 34 - 8. WIRING DIA GRAMS.
- 35 - 9. WA RRANTY Limited W a rranty Exmark Comm ercial Turf Equipment Exmark Mfg. Co. Inc. (" Exmark") warrant s on the term s and conditions herein, that it will repair, replace or adjus.
- 36 - As a condition to this warrant y, customer shall have read the operator 's manual and shall have returned to Exmark, within the pr escribed time, the enclosed warranty reg istration card. The sole liability of Exmark with respect to t his warranty shall be repair and replacement as set for th herein.
- 37 - SERVICE RECORD Date Description of Work Done Service Done By.
- 38 - T H I S I S A 1 5 ° SL O P E T H I S I S A 1 0 ° S L O P E T H I S I S A 5 ° S L O P E ALIGN THIS EDGE WITH A VERTICAL SURF ACE (TREE, BUILDING, FENCE POST , POLE ETC.
SEE EXMARK’S COMPLETE LINE OF PRODUCTS FOR TURF CARE LAZER Z ™ LAZER Z ™ HP TURF RANGER ® TURF TRACER ® TURF TRACER ® HP VIKING HYDRO METRO ™ METRO ™ HP SELF STEERIN G SULKY GRASS CATCHER MICRO-MULCH ™ ACCESS ORY ® MF G . C O. I N C . ©1997,1998, 1999 PA RT NO.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Exmark Metro c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Exmark Metro - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Exmark Metro, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Exmark Metro va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Exmark Metro, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Exmark Metro.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Exmark Metro. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Exmark Metro ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
