Manuel d'utilisation / d'entretien du produit EN-7542H du fabricant EverFocus
Aller à la page of 48
Instruction Manual EN-7542H 42” PREMIUM Wide Screen TFT-LCD MONITOR.
Please read this manual thoroughly before use, and keep i t handy for future reference..
SAFETY INSTRUCTION ……………………………………………… ………………….. 2 ~ 3 CAUTIONS ……………………………………………………………… ...................... .... 4 FCC RF INTERFERENCE STATEM EN T ……………………… …….
INSTRUCTION MANUA L ………………………………………………………… …………. 1 Import ant Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water .
bsolete outlet. 10. Protect the power cord from being walked on or pinched p articularly at pl ugs, convenience recept acles and the point where they exit from the apparatus.
This symbol is intended to alert the user to the presence of uninsulated : dangerous voltage with in the product’s enclosure that may be of suffici ent magnitude to constitute a risk of electric shock to persons.
NEVER REMOVE THE BACK COVER Removal of t he back cover should be carried out only by qual ified person nel. DO NOT USE IN HO S TI LE ENVIRONME NT S To prevent shock or fire hazard, do not expose the unit to rain or moist ure. This unit is designed to be used in the office or home.
This equipment h as been tested and found to comply w ith the limits for a Cl ass A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide re asonable protection against harmful i nterference in a residential inst allation.
A. BACK PANEL CONTROL 1. HDMI IN 2. DVI IN 3. PC VGA IN 4. PC STEREO IN 5. AUDIO O UT 6. COMPONENT IN 7. COMP ONENT AU D IO L/R IN 8. Trigger Input 9. AV 1 IN Composite signal input for AV 1 10. AV 1 OUT Video looping out for AV 1 11. AV 2 IN Composite signal input for AV 2 12.
6 ……………………………………………………………………. INSTRUCTION MA NUAL B. REMOTE CONTROLLER 1. POWER ( ) Turn the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or video(AV1/AV2/S-Video/Component/HDMI/DVI/PC) sources.
INSTRUCTION MANUA L ………………………………………………………… …………. 7 C. FRONT KEY CONTROL 1. SOURCE / S E LE C T Select PC or video. Select On Screen Disp lay menu. 2. MENU Activate and exit the On Screen Display. 3 / 4.
9. POWER LED The power LED light s with green when the power is turn ed ON. The power is t urned off by press ing the power switch again and the power LED goes Red.
A: CUSTOM MENU (For HDMI, DVI & PC Input) 1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to s elect the Custom. 2) Press the up( ▲ ) or down( ▼ ) button to select the sub menu. 3) Pres s the left(◀) or right( ▶ ) button to adjust the picture setting.
1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Picture / S ound. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Picture Mode. 4) Press the right( ▶ ) or SOURCE/SELECT button.
3. Mute 1) Press the up( ▲ ) or down( ▼ ) button to select the Mute. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off.
INSTRUCTION MANUAL …… ………………………………………………………………. 11 5. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option.
1) Press the up( ▲ ) or down( ▼ ) button to select the NR. 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. 12 ……………………………………………… …………………….
1) Press the up( ▲ ) or down( ▼ ) button to select the 3D Comb. 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. B. Picture / Sound Menu (For HDMI, DVI & PC Input) 1.
5) Press the up( ▲ ) or down( ▼ ) button to select the Picture Mode option. 6) Press the MENU button to save. INSTRUCTION MANUAL …… ………………………………………………………………. 13 2-1. Color Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone.
3) Press the left( ▶) or SOURCE/SELECT button again. 4) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone option. 5) Press the MENU button to save. 14 ……………………………………………… ……………………. INSTRUCTION MANUAL 2-2.
3) Press the up( ▲ ) or down( ▼ ) button to select the Red(R), Green(G) or Blue(B). 4) Press the left(◀) or right( ▶) button to adjust color density. 5) Press the MENU button to save. INSTRUCTION MANUAL …… ……………………………………………………………….
1) Press the up( ▲ ) or down( ▼ ) button to select the Size. 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option. 4. PC control (On ly PC Input ) 1) Press the up( ▲ ) or down( ▼ ) button to select the PC.
Phase: Adjust the number of horizontal picture elements. H-Position: Move image horizontally on screen right or left. V-Position: Move image vertically on screen up or down. Frequency: Adjust the vertical noise of screen image. 16 ……………………………………………… …………………….
2) Press up( ▲ ) or down( ▼ ) button to select the On or Off. 3) Press the MENU button to save. INSTRUCTION MANUAL …… ………………………………………………………………. 17 2. Input Source 1) Press the up( ▲ ) or down( ▼ ) button to select the Input Source.
3. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option. 4) Press the MENU button to save. 18 ……………………………………………… …………………….
1) Press the up( ▲ ) or down( ▼ ) button to select the Position. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Position option. 4) Press the MENU button to save. 5. Sw ap 1) Press the up( ▲ ) or down( ▼ ) button to select the Swap.
INSTRUCTION MANUAL …… ………………………………………………………………. 19 5. Sound Select 1) Press the up( ▲ ) or down( ▼ ) button to select the Sound Select. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Sound Select option.
1) Press the up( ▲ ) or down( ▼ ) button to select the Input Source. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Input Source option. 4) Press the MENU button to save. 20 ……………………………………………… …………………….
1) Press the right( ▶ ) or SOURCE/SELECT button 2) Press the right( ▶ ) or SOURCE/SELECT button again. 3) Press SOURCE/SELECT button to execute the reset. Reset : All settings go to the factory initialization. INSTRUCTION MANUAL …… ……………………………………………………………….
1) Press the up( ▲ ) or down( ▼ ) button to select the Language. 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select language. 4) Press the MENU button to save. 3. OSD Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the OSD Tone.
4. Blue Screen 1) Press the up( ▲ ) or down( ▼ ) button to select the Blue Screen. 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or O ff. 4) Press the MENU button to save. 5. Key Lock 1) Press the up( ▲ ) or down( ▼ ) button to select the Key Lock.
INSTRUCTION MANUAL …… ………………………………………………………………. 23 6. Trigger 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger. 2) Press the right() or SOURCE/SELECT button. 6-1. Trigger Enable 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Enable.
24 ……………………………………………… ……………………. INSTRUCTION MANUAL 6-2. Trigger Input 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input . 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input option.
INSTRUCTION MANUAL …… ………………………………………………………………. 25 6-4. Trigger Time 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Ti me. 2) Press left() or right() button to adjust Trigger Time setting.
N/C (Normal Closed): When Trigger cable is opened, Trigger function is activated. N/O (Normal Opened): When Trigger cable is closed, Trigger function is activated. High: When Trigger signal is hig h(2~5 [V]), Tri gger function is activated. Low: When Trigger signal is low(0~0.
The Type of Imag e 2 : Component, HD MI, DVI or PC. INSTRUCTION MANUAL …… ………………………………………………………………. 27 7. Auto switching 1) Press the up( ▲ ) or down( ▼ ) button to select the Auto switc hing. 2) Press the right() or SOURCE/SELECT button.
1) Press the right() or SOURCE/SELECT button. 2) Press the up( ▲ ) or down( ▼ ) button to select the On or Off . 3) Press the Menu button to save. 28 ……………………………………………… ……………………. INSTRUCTION MANUAL 7-2.
1) Press the up( ▲ )or down( ▼ ) button to select the Inputs enabled. 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Input. 4) Press the right() or SOURCE/SELECT button. 1) Press the up( ▲ ) or down( ▼ ) button to select the On or O ff.
1) Press the up( ▲ ) or down( ▼ ) button to select the Time. 2) Press the left() or right() button to adjust the Time setting. 3) Press the MENU button to save. 8. Image Rotation 1) Press the up( ▲ ) / down( ▼ ) button to sel ect the Image Rotation.
30 ……………………………………………… ……………………. INSTRUCTION MANUAL 8-1. Image Rotation On/Off 1) Press the right( ▶ ) or SOURCE/SELECT button. 2) Press the up( ▲ ) or down( ▼ ) button to select the On or O ff .
INSTRUCTION MANUAL …… ………………………………………………………………. 31 Using the wall mo unt design and the (130x130)x 634 hole pattern on the back panel to install the LCD monitor to the wall . Wall-mount Installation 1.
32 ……………………………………………… ……………………. INSTRUCTION MANUAL.
▶ PIN ASSI G NMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL (for DDC) 8 BLUE GROUND ▶ ACCESSORY INSTRUCTION MANUAL ………………… ………………………………………………….
This monitor features a power management syst em to “power down” upon receipt of the VESA DPMS(The display power management sign alin g) from a VESA DPMS video ca rd. The VESA DPMS-compliant vid eo card performs this signali ng syste m through n ot sending horizontal, vertical, or sync signal.
42’’ WXGA 42’’ WUXGA 42 ˝ Diagonal AM-TFT(Active -Matrix) 42 ˝ Diagonal AM-TFT( Active-Matrix) Pixel pitch(mm) : 0.681mm(H) x 0.681mm(V) Pixel pitch( mm) : 0.
INSTRUCTION MANUAL …… ………………………………………………………………. 35 WEEE Symbols.
36 ……………………………………………… ……………………. INSTRUCTION MANUAL Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the.
Taiwan - Headquarter Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan Tel: +886-2-26982334 Fax: +886-2-26982380 China - Beijing Office Room 609,Technology Trade Build ing.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté EverFocus EN-7542H c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du EverFocus EN-7542H - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation EverFocus EN-7542H, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le EverFocus EN-7542H va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le EverFocus EN-7542H, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du EverFocus EN-7542H.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le EverFocus EN-7542H. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei EverFocus EN-7542H ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
