Manuel d'utilisation / d'entretien du produit W16SK du fabricant Epson
Aller à la page of 179
PowerLite ® W16SK User's Guide.
.
Contents PowerLite W16SK User's Guide ................................................................................................................. 9 Introduction to Your Projector .............................................................
Connecting to an External Computer Monitor ................................................................................ 37 Connecting to External Speakers ............................................................................................
Entering a Password to Use the Projector................................................................................. 66 Locking the Projector's Buttons .........................................................................................
Using the Projector Help Displays .................................................................................................... 111 Solving Image or Sound Problems ................................................................................
3D Safety Instructions ................................................................................................................. 135 Restriction of Use ...........................................................................................
.
PowerLite W16SK User's Guide Welcome to the PowerLite W16SK User's Guide . 9.
Introduction to Your Projector Refer to these sections to learn more about your projector and this manual. Projector Features Notations Used in the Documentation Where to Go for Additional Information.
Parent topic: Introduction to Your Projector Additional Components Depending on how you plan to use the projector, you will need to obtain the following additional components: • To receive a composite video signal, you need three RCA-style video or A/V cables and a splitter that supports composite video signals.
Related references Optional Equipment and Replacement Parts Optional Equipment and Replacement Parts You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
Warranty and Registration Information Your projector comes with a basic warranty that lets you project with confidence. For details, see the warranty that came with your projector. In addition, Epson offers free Extra Care Road Service. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired.
Related tasks Using the Projector Help Displays Projector Part Locations Check the projector part illustrations to learn about the parts on your projector.
1 Exhaust vent 2 Commander projector 3 Lamp cover 4 Control panel 5 Projector status lights 6 Security cable attachment point and Kensington security lock slot 15.
7 Speaker 8 Air filter cover and intake vent 9 Stacking mount connector 10 Stacking mount 11 Stacking mount angle adjustment 12 Zoom ring 13 Focus ring 14 Screen Fit sensor 15 Remote receiver 16 Polar.
Projector Parts - Rear 1 Audio ports 2 S-Video port 3 USB-A /document camera port (used on the commander projector for connection to the receiver projector; port is not functional on the receiver proj.
5 HDMI port 6 Computer1 port 7 Monitor Out / Computer2 port 8 Audio Out port 9 Commander projector 10 Receiver projector 11 Remote receiver 12 RS-232C port (port is not functional on the receiver proj.
Projector Parts - Base 1 Front adjustable foot 2 Mounting bracket holes 3 Security cable attachment point 4 Rear adjustable feet Parent topic: Projector Part Locations 19.
Projector Parts - Control Panel 1 Power button 2 Source Search button (searches for connected sources) 3 Enter button (selects options) 4 Arrow buttons 5 Help button (accesses projector help informati.
9 Screen Fit button (superimposes projector images) 10 Focus Help button (button is not functional when the projectors are being used together in a stacked configuration) Parent topic: Projector Part .
Projector Parts - Remote Control 1 Power button 22.
2 Computer button (cycles through connected computer sources) 3 Video button (cycles through connected video sources) 4 Screen Fit button (superimposes projector images) 5 Numeric buttons (enter numbe.
Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Projector Connections Installing Batteries in the Remote Control Opening the Lens Covers Projector Placement You can place the projector on almost any flat surface to project your presentation.
Rear Front Ceiling Rear Ceiling 25.
Wherever you set up the projector, make sure to position it squarely in front of the center of the screen, not at an angle, if possible. If you project from the ceiling or from the rear, be sure to select the correct Projection option in the projector's menu system.
16:10 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Screw hole number (2) Minimum to Maximum 80 inches (203 cm) 97 to 106 inches 4 (248 to 270 cm) 100 inches (254 cm) 122 t.
Screen or image size Projection distance (1) Screw hole number (2) Minimum to Maximum 80 inches (203 cm) 100 to 109 inches 4 (255 to 278 cm) 100 inches (254 cm) 125 to 137 inches 3 (319 to 348 cm) 120.
Connecting to Video Sources Follow the instructions in these sections to connect video devices to the projector. Connecting to an HDMI Video Source Connecting to a Component-to-VGA Video Source Connec.
Note: If you connected a game console, it may take a few seconds for your image to appear. To reduce the lag time, set your game console's input signal to a progressive signal of 480p or 720p. See your game console documentation for instructions.
Note: If you connected a game console, it may take a few seconds for your image to appear. To reduce the lag time, set your game console's input signal to a progressive signal of 480p or 720p. See your game console documentation for instructions.
Parent topic: Connecting to Video Sources Related tasks Connecting to a Video Source for Sound Connecting to a Composite Video Source If your video source has a composite video port, you can connect it to the projector using optional RCA- style video or A/V cables and a splitter that supports composite video signals.
Connecting to a Video Source for Sound You can play sound through the projector's speaker system if your video source has audio output ports. Connect the projector to the video source using an RCA audio cable. 1. Connect the audio cable to your video source's audio-out ports.
2. Connect a VGA computer cable to your computer's monitor port. Then connect the other end of the cable to the commander projector's Computer1 port. 3. Connect a VGA computer cable between the commander projector's Computer2 port and the receiver projector's Computer1 port.
3. Connect a VGA computer cable between each projector's Computer port and the splitter. Note: If you choose the Computer2 ports, you may need to change the Monitor Out Port setting in the projector's Extended menu. 4. Tighten the screws on the VGA connectors.
2. Connect an HDMI cable between each projector's HDMI port and the splitter. Note: The projector will convert the digital audio signal sent from your computer into a mono analog signal for the internal speaker or a stereo analog signal if you are connecting to external speakers.
Parent topic: Connecting to Computer Sources Connecting to an External Computer Monitor If you connected the projector to a computer using a Computer port, you can also connect an external monitor to the projector. This lets you see your presentation on the external monitor even when the projected image is not visible.
1. Make sure your computer or video source is connected to the projector with both audio and video cables as necessary. 2. Locate the appropriate cable to connect your external speakers, such as a stereo mini-jack-to-pin- jack cable, or another type of cable or adapter.
1. Open the battery cover as shown. 2. Insert the batteries with the + and – ends facing as shown. 39.
3. Close the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed.
Opening the Lens Covers 1. To open the projectors' lens covers, slide each projector's A/V Mute slide lever. 2. To cover the lenses or temporarily turn off the projected picture and sound, slide the A/V Mute slide covers closed.
Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Product Turning Off the Product Viewing 3D Images Selecting the Lan.
1. Open the projectors' lens covers. 2. Connect the power cords to the projectors' power inlets. 43.
3. Plug the power cords into an electrical outlet. The projectors' power lights turn orange. This indicates that the product is receiving power, but is not yet turned on (it is in standby mode). Note: With Direct Power On turned on, the product turns on as soon as you plug it in.
2. Press the power button again. (To leave it on, press any other button.) The projectors beep twice, the lamps turn off, and the power lights turns orange. Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the product for transport right away (if necessary).
4. Close the projectors' lens covers. Parent topic: Using Basic Projector Features Viewing 3D Images You can view 3D images using your projector. 1. Connect a 3D-compatible video device to the projector using compatible HDMI cables. You may also need a splitter that supports 3D signals.
4. Press the 2D/3D button on the remote control to activate 3D mode, if necessary. 5. Put on your passive 3D glasses. 3D Viewing Range Parent topic: Using Basic Projector Features Related references A.
1 30º Parent topic: Viewing 3D Images Selecting the Language for the Projector Menus If you want to view the projector's menus and messages in another language, you can change the Language setting. 1. Turn on the projector. 2. Press the Menu button.
3. Select the Extended menu and press Enter . 4. Select the Language setting and press Enter . 5. Select the language you want to use and press Enter .
3. If the image is tilted, rotate the rear feet to adjust their height. After you adjust the image, you must reapply the Screen Fit feature to correctly superimpose the projectors' images. See your Setup Guide for instructions. Parent topic: Using Basic Projector Features Resizing the Image With the Zoom Rings 1.
After you resize the image using the zoom rings, you must reapply the Screen Fit feature to correctly superimpose the projectors' images. See your Setup Guide for instructions. Parent topic: Using Basic Projector Features Focusing the Image Using the Focus Rings 1.
1 19.7 feet (6 m) 2 ± 30º 3 ± 15º Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you will not use the remote control for a long time, remove the batteries.
2. For video image sources, insert a DVD or other video media and press its play button (if necessary). 3. Do one of the following: • Press the Source Search button on the projector or remote control until you see the image from the source you want.
2 Video and HDMI sources Parent topic: Using Basic Projector Features Projection Modes Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly. • Front (default setting) lets you project from a table in front of the screen.
The image disappears briefly and reappears flipped top-to-bottom. 3. To change projection back to the original mode, hold down the A/V Mute button for five seconds again.
Image Aspect Ratio The projector can display images in different width-to-height ratios called aspect ratios. Normally the input signal from your video source determines the image's aspect ratio. However, for certain images you can change the aspect ratio to fit your screen by pressing a button on the remote control.
Available Image Aspect Ratios You can select the following image aspect ratios, depending on the input signal from your image source. Note: When the projector is in 3D mode, the aspect ratio is automatically set to Normal .
Related references Image Quality Settings - Image Menu Changing the Color Mode You can change the projector's Color Mode using the remote control to optimize the image for your viewing environment. 1. Turn on the projector and switch to the image source you want to use.
Color Mode Description Photo Best for still images projected in a bright room Sports Best for television images in a bright room (video, S-Video, or composite video input only) sRGB Best for standard .
3. Select the Image menu and press Enter . 4. Select the Auto Iris setting and select On . Note: You can turn Auto Iris on or off for each Color Mode that supports the feature. You cannot change the Auto Iris setting when you are using a Closed Caption setting.
2. To lower or raise the volume, press the Volume buttons on the remote control or these buttons on the control panel. A volume gauge appears on the screen. 3. To set the volume to a specific level for an input source, you can set the volume using a projector menu.
Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture and Sound Temporarily Stopping Video Action Temporaril.
1. Press the Freeze button on the remote control to stop the video action. Note: The superimposed images may slip out of sync while the video action is stopped.
• To zoom out of the image, press the E-Zoom – button as necessary. • To return to the original image size, press Esc . Parent topic: Adjusting Projector Features Projector Security Features You.
3. After the projector warms up, hold down the Freeze button on the remote control until you see the Password Protect menu. This takes about five seconds. 4. Press the down arrow to select Password and press Enter . You see the prompt "Change the password?".
9. To prevent unauthorized use of the projector, select Power On Protect , press Enter , select On , press Enter again, and press Esc . 10. To prevent changes to the User's Logo screen or related display settings, select User's Logo Protect , press Enter , select On , press Enter again, and press Esc .
1. Hold down the Num button on the remote control while you enter the password using the numeric buttons. The password screen closes. 2. If the password is incorrect, the following may happen: • You see a "wrong password" message and a prompt to try again.
2. Select the Settings menu and press Enter . 3. Select the Control Panel Lock setting and press Enter . 4. Select one of these lock types and press Enter : • To lock all of the projector's buttons, select Full Lock . • To lock all buttons except the power button, select Partial Lock .
• Use the security cable attachment points on the projectors to attach wire cables and secure them to a room fixture or heavy furniture. Parent topic: Projector Security Features Related references Optional Equipment and Replacement Parts Using the Projectors Individually You can use either projector individually if necessary.
When the projector is in this mode, it functions like a PowerLite W16 projector, but without the following PowerLite W16 features: • 3D • Projection from an external USB device • Automatic verti.
7. Press Menu or Esc to exit the menus. 8. Turn off the product. 9. Unplug the power cords. 10. Disconnect the USB cable. 11. Remove the stacking mount angle adjustment screws (on both sides). 12. Loosen the stacking mount connector screws (on both sides).
13. Separate the commander and receiver projectors. 72.
14. Remove the stacking mounts from the projectors. 73.
When the projector's Stack Mode setting is set to Off , it functions like a PowerLite W16 projector, but without 3D capabilities. See the PowerLite W16 User's Guide for instructions when using the projector with stack mode deactivated.
1. Turn on one of the projectors using the power button on the control panel. 2. Press the Menu button. 3. Select the Extended menu and press Enter . 4. Select the Operation setting and press Enter . 5. Select the Stack Mode setting and press Enter . 6.
76.
11. See the Setup Guide to continue the stacking process. Parent topic: Separating the Projectors 77.
Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Using the Projector's Menus Image Quality Settings - Image.
2. Press the up or down arrow buttons to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3. To change settings in the displayed menu, press Enter .
To change settings for an input source, make sure the source is connected and select that source. Setting Options Description Color Mode See the list of available Color Adjusts the vividness of image .
To change settings for an input source, make sure the source is connected and select that source. Setting Options Description Auto Setup On Automatically optimizes computer image quality (when Off On).
Setting Options Description Progressive Off Sets whether to convert interlaced-to-progressive signals Video for certain video image types Film/Auto Off : for fast-moving video images Video : for most .
Setting Options Description Video Signal Auto Specifies the signal type from the input sources connected to the Various video standards video ports Auto : detects signals automatically Aspect See the .
Setting Options Description Adjust Commander Pos. Pattern Color (Commander) Selects options related to the Screen Fit process Pattern Color (Receiver) Pattern Color (Commander) : Start Adjustments sel.
Setting Options Description User Button Power Consumption Assigns a menu option to the User button on the remote Info control for one-touch access Progressive Closed Caption Resolution Parent topic: A.
Setting Options Description Display Messages Selects various display options Display Background Messages : controls whether messages are displayed on the Startup Screen screen A/V Mute Display Backgro.
Setting Options Description Operation Direct Power On Selects various operation options Sleep Mode Direct Power On : lets you turn on the projector without pressing Sleep Mode Timer the power button L.
First select either the commander projector or receiver projector in the menu and press Enter . You see a menu like this: Note: The lamp usage timer does not register any hours until you have used the lamp for at least 10 hours. Available settings depend on the current input source.
Information item Description Status Displays information about projector problems that may be needed by a service technician Serial Number Displays the projector's serial number Parent topic: Adj.
Maintaining and Transporting the Projector Follow the instructions in these sections to maintain your projector and transport it from place to place. Projector Maintenance Transporting the Projector Projector Maintenance Your projector needs little maintenance to keep working at its best.
• To remove dust or smudges, gently wipe the lens with lens-cleaning paper. • To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the lens. Do not spray any liquid directly on the lens. Warning: Do not use a lens cleaner that contains flammable gas.
Cleaning the 3D Glasses To remove dust, dirt, smudges, or fingerprints from the glasses, use a soft, dry, lint-free cloth. Caution: Do not use paper towels or any other abrasive materials to clean the glasses.
If regular maintenance is not performed, your Epson projector will notify you when the temperature inside the projector has reached a high level. Do not wait until this warning appears to maintain your projector filter as prolonged exposure to high temperatures may reduce the life of your projector or lamp.
2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as a paintbrush). Note: You can remove an air filter so you can clean both sides of it. Do not rinse the air filter in water, or use any detergent or solvent to clean it.
Note: Along with the message, you will also see an indicator like this. Projector 1 represents the commander and projector 2 represents the receiver. The green arrow points to the projector that the message is referring to. You can replace the air filter while the projector is mounted to the ceiling, if necessary.
2. Place your finger into the groove at the top of the air filter cover and pull to open the cover. 96.
3. Pull the air filter out of the projector. Note: Air filters contain ABS resin and polyurethane foam. Dispose of used air filters according to local regulations.
4. Place the new air filter in the projector as shown and push gently until it clicks into place. 5. Close the air filter cover. Parent topic: Air Filter and Vent Maintenance Projector Lamp Maintenance The product keeps track of the number of hours the lamps are used and displays this information in the product's menu system.
Replacing the Lamp Resetting the Lamp Timer Parent topic: Projector Maintenance Related references Projector Information Display - Info Menu Optional Equipment and Replacement Parts Projector Lamp Specifications Replacing the Lamp Before you replace the lamp, let the product cool down for at least one hour so the lamp will not be hot.
3. If you need to replace the lamp in the receiver projector, remove the stacking mount angle adjustment screws on both sides (and note which screw hole number you used). Then tilt the commander projector back so that you can access the receiver projector's lamp.
4. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp cover. Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber.
6. Loosen the screws securing the lamp to the projector. The screws do not come all the way out. 7. Lift up the lamp handle and gently pull the lamp out of the projector. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling.
8. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way. Press the handle down until it locks into place. Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure. 9.
10. Replace the lamp cover and tighten the screw to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on. 11. If you replaced the receiver projector's lamp, tilt the commander projector forward and reattach the stacking mount angle adjustment screws.
2. Press the Menu button. 3. Select the Reset menu and press Enter . 4. Select the Reset Lamp Hours option for the projector in which you replaced the lamp and press Enter . You see a prompt asking if you want to reset the lamp hours. 5. Select Yes and press Enter .
1. Open the battery cover as shown. 2. Remove the old batteries. Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on your hands. If it gets on your hands, wash them immediately to avoid injury. 3. Insert the batteries with the + and – ends facing as shown.
4. Close the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed.
Solving Problems Check the solutions in these sections if you have any problems using the projector. Projection Problem Tips Projector Light Status Using the Projector Help Displays Solving Image or S.
1 Power light 2 Lamp light 3 Temperature light Power light Lamp light Temperature Status and solution light Green Off Off Normal operation. Flashing green Off Off Warming up. Wait for an image to appear. Orange Off Off Standby or sleep mode. Flashing orange Off Off Shutting down.
Power light Lamp light Temperature Status and solution light Red Off Red Projector has overheated and turned off. Leave it turned off to cool down. Once the temperature light turns off and the power l.
Parent topic: Solving Problems Related references Projector Setup Settings - Extended Menu Where to Get Help Related tasks Cleaning the Air Filter and Vents Replacing the Air Filter Replacing the Lamp Using the Projector Help Displays You can display information to help you solve common problems using the projector's Help system.
Solutions When the Image is Fuzzy or Blurry Solutions When the Image Brightness or Colors are Incorrect Solutions When a 3D Image Does Not Display Correctly Solutions When No Image Appears on an Exter.
Related references Projector Setup Settings - Extended Menu Input Signal Settings - Signal Menu Projector Feature Settings - Settings Menu Related tasks Unlocking the Projector's Buttons Solution.
Displaying From a Mac Laptop If you see the "No Signal" message when you display from a Mac laptop, you need to set up the laptop for mirrored display. (See your laptop manual for details.) 1. Open the System Preferences utility and select Displays .
Related references Supported Video Display Formats Solutions When the Image Contains Noise or Static If the projected image seems to contain electronic interference (noise) or static, try the following solutions: • Check the cables connecting your computer or video source to the projector.
• If you are projecting from a computer, press the Auto button on the remote control to automatically adjust the tracking and sync. • Repeat the Screen Fit process to superimpose the projectors' images. See your Setup Guide for instructions. • If you are projecting from a computer, use a lower resolution.
Solutions When a 3D Image Does Not Display Correctly If a 3D image does not display correctly, try the following solutions: • Press the 2D/3D button on the remote control to switch to 3D mode, if necessary. You can also activate 3D mode by setting the 3D Display setting on the Signal menu to On .
• Make sure you set the Monitor Out Port setting to Monitor Out . Parent topic: Solving Image or Sound Problems Related references Projector Setup Settings - Extended Menu Solutions to Sound Problems If there is no sound when you expect it or the volume is too low, try the following solutions: • Adjust the projector's volume settings.
Solutions to Projector Power or Shut-Off Problems If the product does not come on when you press the power button or it shuts off unexpectedly, try the following solutions: • Make sure the power cords are securely connected to the product and to a working electrical outlet.
Solutions to Problems with the Remote Control If the projector does not respond to remote control commands, try the following solutions: • Check that the remote control batteries are installed correctly and have power. If necessary, replace the batteries.
Parent topic: Solving Projector or Remote Control Operation Problems Related references Where to Get Help Where to Get Help If you need to contact Epson for technical support services, use the following support options. Internet Support Visit Epson's support website at www.
Parent topic: Solving Problems Related tasks Using the Projector Help Displays 122.
Technical Specifications These sections list the technical specifications of your projector. General Projector Specifications Projector Lamp Specifications Remote Control Specifications Projector Dime.
Optical aspect ratio 16:10 (width-to-height) Focus adjustment Manual Zoom adjustment Manual (optical) Zoom ratio 1:1.2 (Minimum-to-Maximum) Internal sound system 2 W monaural (for each projector) Nois.
Remote Control Specifications Reception range 19.7 feet (6 m) Batteries Two alkaline or manganese AA Parent topic: Technical Specifications Projector Dimension Specifications Note: These specifications apply to the product when the projectors are stacked.
Power consumption Operating: (220 to 240 V) Normal Power Consumption mode: 277 W ECO Power Consumption mode: 230 W Standby: 0.40 W (Communication Off), 3.
Projector Safety and Approvals Specifications United States Stacked configuration: FCC Part 15B Class A (DoC) UL60950-1 2nd edition (cTUVus Mark) Single projector configuration: FCC Part 15B Class B (DoC) UL60950-1 2nd edition (cTUVus Mark) Canada Stacked configuration: ICES-003 Class A CSA-C22.
Display format Refresh rate (in Hz) Resolution (in pixels) XGA 60/70/75/85 1024 × 768 WXGA 60/75/85 1280 × 800 60 1280 × 768 60 1366 × 768 WXGA+ 60/75/85 1440 × 900 60 1600 × 900 SXGA 70/75/85 1.
Display format Refresh rate (in Hz) Resolution (in pixels) HDMI input signals VGA 60 640 × 480 SVGA 60 800 × 600 XGA 60 1024 × 768 WXGA 60 1280 × 800 60 1366 × 768 WXGA+ 60 1440 × 900 WXGA++ 60 .
Display format Refresh rate (in Hz) Resolution (in pixels) 3D formats HDTV1125p (1080p) 24 1920 × 1080 Frame Packing Top and Bottom 50/60 1920 × 1080 Side by Side Parent topic: Technical Specificati.
Notices Check these sections for important notices about your projector. Recycling Important Safety Information Important Safety Instructions Trademarks Open Source Software License Copyright Notice Recycling Epson offers a recycling program for end of life products.
Important Safety Instructions Follow these safety instructions when setting up and using the projector: • Do not look into the lens when the projector is on. The bright light can damage your eyes. Avoid standing in front of the projector so the bright light does not shine into your eyes.
• Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially flammable objects, near the projector. Never spill liquid of any kind into the projector.
• Do not store the projector outside of the required temperature range of 14 to 140 ºF (–10 to 60 ºC) or in direct sunlight for long periods of time. Doing so may cause damage to the case. • Do not place anything that can become warped or damaged by heat near the exhaust vents.
3D Safety Instructions Follow these 3D safety instructions when setting up and using the projector: • If you or any viewer experiences the following symptoms or other major discomfort from viewing 3.
People who are sleep deprived People who are physically tired People under the influence of drugs or alcohol Anyone who has ever experienced epileptic seizures or sensory disturbances triggered by flashing light effects SOME LIGHT PATTERNS MAY INDUCE SEIZURES IN PERSONS WITH NO PRIOR HISTORY OF EPILEPSY.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
• EPSON original drivers • Stonestreet One Drivers The GNU General Public License Version 2 is as follows. You also can see the GNU General Public License Version 2 at http://www.gnu.org/licenses. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc.
proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0.
normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole.
the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this Lice.
END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.
This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License.
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users.
Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library.
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library.
unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6.
with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.
PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR A.
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. <signature of Ty Coon>, 1 April 1990 Ty Coon, Pr.
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. libjpeg This projector product includes the open source software program "libjpeg" which applies the terms and conditions provided by owner of the copyright to the "libjpeg".
(1) If any part of the source code for this software is distributed, then this README file must be included, with this copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original files must be clearly indicated in accompanying documentation.
"The Graphics Interchange Format(c) is the Copyright property of CompuServe Incorporated. GIF(sm) is a Service Mark property of CompuServe Incorporated.
libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright (c) 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-0.96, with the following individuals added to the list of Contributing Authors: Tom Lane Glenn Randers-Pehrson Willem van Schaik libpng versions 0.
2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source. 3. This Copyright notice may not be removed or altered from any source or altered source distribution. The Contributing Authors and Group 42, Inc.
1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.
"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity.
transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted.
7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOU.
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
LUCENT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL LUCENT OR ANY OF ITS ENTITIES BE LIABLE FOR ANY SPECIAL.
Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved. Developed at SunPro, a Sun Microsystems, Inc. business. Permission to use, copy, modify, and distribute this software is freely granted, provided that this notice is preserved.
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEO.
3. Neither the name of KTH nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Author: S. L. Moshier. Copyright (c) 1984,2000 S.L. Moshier Permission to use, copy, modify, and distribute this software for any purpose without fee is hereby granted, provided that this entire notic.
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
results of the use of, the software and documentation in terms of correctness, accuracy, reliability, currentness, or otherwise; and you rely on the software, documentation and results solely at your own risk.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
(32) - Andrey A. Chernov (targets using libc/posix) Copyright (C) 1996 by Andrey A. Chernov, Moscow, Russia. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (35) - ARM Ltd (arm and thumb variant targets only) Copyright (c) 2009 ARM Ltd All rights reserved.
* Neither the name of CodeSourcery nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. /* Parent topic: Notices Copyright Notice All rights reserved.
1/13 CPD-38063 Parent topic: Copyright Notice 179.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Epson W16SK c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Epson W16SK - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Epson W16SK, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Epson W16SK va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Epson W16SK, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Epson W16SK.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Epson W16SK. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Epson W16SK ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
