Manuel d'utilisation / d'entretien du produit Elo Entuitive 3000 Series 1522L du fabricant Elo TouchSystems
Aller à la page of 55
Elo T ouchmonitor User Guide For 15” LCD Desktop 1522L-XXWB Series Revision A.
Elo T ouchmonitor User Guide 15 " LCD De s ktop 1522L-XX WB Series Revision A P/N E212991 Elo T ouchSyste ms 1-800-ELOTOUCH www.elotouch.com.
Copyright © 2007 T yco Electronics Corporation. All Rights Reserved. No part of this publication may be reproduced, tra nsmitted, tra nscribed, stored in a retrieval system, or tra nslated into a ny .
Chapter 1 Introduction 1 Product Description ................................................. 1 Detailed LCD Display Performance Requirements .......................................................... 2 Credit Card Reader ............................
Appendix C T echnical Specif ication s 33 Touchmonitor Specifications ......................... 34 IntelliTouch Touchscreen Specifications ................................................ 35 Infrared Touchscreen Specifications ............ 36 Acoustic Pulse Recognition Specifications .
.
C H A P T E R 1 I NTRODUCTION Product Description The 1522L is a retail terminal designed to pre sent information to the operator a nd the customer . The 1522L is available in USB only . The 1522L functionally consists of a 15. 0” LCD main display with a touchscreen, a n optional magnetic stri pe rea der (MSR), a n d a two port USB Hub .
M agnetic Stripe Re ader There is a USB MSR kit, which is sold separately . The USB version MSR is availa ble in Keyboard emulation or HID. The MSR rea ds all three stripes on a sta ndard credit card or driver’s license.
1-3 External Power Supply The 1522L shall be powered by a universal AC power source or 12 V DC from external power source. The power supply shall provide the f ollowing ca pa bility: AC power: Input v.
1-4 Elo T ouchmonitor User Guide.
C H A P T E R 2 I NST ALLA TION AND S ETUP This cha pter discusse s how to install your LCD touchmonitor a nd how to install Elo T ouchSystems driver software.
2-6 Elo T ouchmonitor User Guide Product Overview Front View Re ar View.
Side View Ba se Bottom View 2-7.
Kensington TM Lock The Kensington TM lock is a security device that help to prevent theft. T o find out more a bout this security device, go to http:// www.
USB Interface Connection Y our touchmonitor comes with only one touchscreen USB connector ca ble. (For W in- dows 2000, Me, a nd XP systems only .) T o set up the display , plea se refer to the f ollowing figures a nd procedures: Remove the Ca ble Cover The ca bles are connected at the back of the monitor .
The following illustrations guide you step by ste p in connecting your touchmonitor using a USB ca ble connection. Power cord Connect one end of the power cord to the monitor a nd the other end to wall. Connect the power ca ble to the power port in the monitor .
2-1 1 Speaker ca ble Connect one end of the speaker ca ble to the speaker port in the computer a nd the other end to the port in the monitor. V ideo ca ble Connect one end of the video ca ble to the rear side of computer a nd the other to the LCD monitor .
Replace the Cable Cover Ca ble cover lip ca bles When you have atta ched all the ca bles to the monitor , gently bring all the ca ble s toward the sta nd so they fit under the cover lip.
2-13 Optimizing the LCD Display T o ensure the LCD display works well with your computer , configure the display mode of your gra phic card to make it less tha n or equal to 1024 x 768 resolution, a nd make sure the timing of the display mode is compatible with the LCD display .
Convert MSR from HID to keyboard e mulation MSR Conversion: Get progra m @ http://www .magtek.com/support/software/demo_progra ms/ usb_swi pe_insert_rea der .a sp From the CD, select T ouch Monitor Peri pherals. Select the ET1529 HID-KB Conver - sion folder , a nd follow the instructions in the folder .
2-15 1.6 Swi pe test card. 1.7 Close Rea d Cards dialog. 1.8 Click on Send Comma nd. The f ollowing di alog box will a ppear 1.9 T o send Inquiry MSR type 1.
1.12 The DA T A=00 mea ns it’s USB HID. 1.13 Switch to Keyboard Emulation 1.14 T ype 01 10 01 into area under the hea ding Message (Hex) 1.15 Then click on Send Message. 1.16 Send inquiry MSR type 1.17 T ype 00 10 into area under the hea ding Message (Hex) 1.
2-17 1.22 Then click on Send Message. 1.23 Double click on The KB MSR T est icon in the de sktop a nd slide the test c card. The following icon will a ppear 1.
Installing the T ouch Driver Software Elo T ouchSystems provides driver software that allows your touchmonitor to work with your computer . Drivers are located on the enclosed CD-ROM f or the following operat- ing systems: • W indows XP • W indows 2000 • W indows Me • W indows 98 • W indows 95 • W indows NT 4.
2-19 Installing the USB T ouch Driver In stalling the USB T ouch Driver for Windows XP , W indows 2000, Me a nd 98 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If W indows XP , W indows 2000,W indows 98, or W indows Me starts the Add New Hardware W izard: 2 Choose Next .
2-20 Elo T ouchmonitor User Guide.
C H A P T E R 3 O PERA TION About T ouchmonitor Adjustments Y our touchmonitor will unlikely require a djustment. V ari ations in video output a nd a pplication may require a djustments to your touchmonitor to opti mize the quality of the display .
5 4 3 2 1 LCD Function Key Controls Function 1 Power Switch T urns the display system power on or off . 2 Select Displays the OSD menus on the screen a nd used to input the OSD control options on the screen. 3 Adjusts the decrea sing value of the selected OSD control option.
Controls and Adjustment OSD Lock/Unlock Y ou are a ble to lock a nd unlock the OSD feature. The monitor is shi pped in the unlocked position. T o lock the OSD: 1 Press the Menu button a nd button si multa neously for 2 seconds. A window will a ppear displaying “OSD U nlock”.
OSD Control Options Brightne ss • Ba ckground lumina nce of the LCD pa nel is a djusted. Contra st • Adjusts the contra st or the values of color gain (red, green or blue). Sharp ness • The sharpne ss ca n be a djusta ble. Pha se • Adjusts the pha se of the dot clock.
Power-Save (No In put) • The LCD pa nel background is cut when there is no signal input (AC line power consumption of 4w or less). Power LED Display & Power Saving General Power Saving Mode When the power switch is on , this LED light is green.
CAUTION In order to protect the LCD, be sure to hold the ba se when adjusting the LCD, a nd ta ke care not to touch the screen. 3-26 Elo T ouchmonitor User Guide Tilt 15 o from vertical Tilt 30 o from.
C H A P T E R 4 T ROUBLESHOOTING If you are experiencing trouble with your touchmonitor , refer to the f ollowing ta ble. If the problem persists, plea se conta ct your local dealer or our service center . Elo T echni- cal Support numbers are listed on the la st page of this ma nual.
4-28 Elo T ouchmonitor User Guide.
C H A P T E R A N A TIVE R ESOLUTION The native resolution of a monitor is the resolution level at which the LCD pa nel is designed to perf orm be st. For the Elo LCD touchmonitor , the native resolution is 1024 x 768 for the 15” size. In almost all ca ses, screen i mage s look be st when viewed at the ir native resolution.
As a n exa mple, a SV GA resolution LCD pa nel ha s 800 pixels horizontally by 600 pixels vertically . Input video is also repre sented by the sa me terms.
C H A P T E R B T OUCHMONIT OR S AFETY This ma nual contains information that is i mporta nt f or the proper setup a nd maintena nce of your touchmonitor . Before setting up a nd powering on your new touchmonitor , read through this ma nual, especi ally Cha pter 2 (Installation a nd Setup), a nd Chapter 3 (Operation).
Care and Handling of Y our T ouchmonitor The following ti ps will help keep your Elo touchmonitor functioning at the opti mal level. • T o avoid risk of electric shock, do not disa sse mble the brick supply or display unit ca binet. The unit is not user servicea ble.
C H A P T E R C T ECHNICAL S PECIFICA TIONS Display Modes Y our Elo touchmonitor is compatible with the following sta ndard video modes: Ite m Resolution T ype H. Sca n(KHz) V . Sc a n(Hz) Pol. 1 640 x 350 V GA 31.469 70.087 + / 2 720 x 400 V GA 31.469 70.
T ouchmonitor Specifications Model 1522L LCD Display 15.0” TFT Active Matrix Pa nel Display Size 304.1(H) x 228(V) mm Pixel Pitch 0.297(H) x 0.297(V) mm Display Mode V GA 640 x 350 (70 Hz) V GA 720 .
IntelliT ouch T ouchscreen Specification s Mecha nical Positional Accuracy Sta ndard devi ation of error is less tha n 0.080 in. (2.03 mm). Equates to le ss tha n ±1%. T ouchpoint Density More tha n 100,000 touchpoints/in2 (15,500 touchpoints/cm2). T ouch Activation Force T ypically less tha n 3 ounces (85 gra ms).
CarrollT ouch Infrared T ouchscreen Specif ication s Mecha nical Input Method Finger or gloved ha nd a ctivation Electrical Positional Accura cy T ypical centroid a ccuracy: 2 mm with 1 mm ST D error .
Acoustic Pulse Recognition Specif ications Mecha nical Input Method Finger , finger nail, gloved ha nd, or stylus activation Electrical Position Accuracy 1% max. error Resolution Accura cy T ouchpoint density is ba sed on controller resolution of 4096 x 4096 T ouch Activation Force T ypically 2 to 3 ounces (55 to 85 gra ms) Controller Board: USB 1.
AccuT ouch T ouchmonitor Specif ications Mecha nical Construction T op: Polyester with outside hard-surfa ce coating with clear or a ntiglare finish. Inside: T ra nsparent conductive coating. Bottom: Glass substrate with unif orm resistive coating. T op a nd bottom layers separated by Elo-patented separator dots.
Surfa ce Ca pa citive T ouchscreen Specification s Mecha nical Input method Finger Gla ss Thickne ss 0.1 18" / 3.0 mm nominal. (Gla ss only , not including tape, wires a nd/or solder if used) Electrical Positional Accuracy Re ported touch coordinates are within 1.
C-40 Elo T ouchmonitor User Guide 15” LCD T ouchmonitor(1522L-XXXB-1-XX-G) Dimensions.
REGULA TOR Y INFORMA TION I. Electrical Safety Information: A) Compli a nce is required with respect to the voltage, frequency , a nd current require- ments indicated on the ma nufa cturer’s la bel.
This Information T echnology Equipment (ITE) is required to have a CE M ark on the ma nufa cturer’s label which mea ns that the equi pment ha s been tested to the following Directive s a nd Sta ndar.
43 "The a pplication of this monitor is re stricted to speci al controlled luminous screen surfa ce trend to reflect a nnoying light of la mps a nd sunlight. T o avoid these reflections the monitor should not be positioned in front of a window or directed to luminaries.
44 Elo T ouchmonitor User Guide.
W ARRANTY Except a s otherwise stated herein or in a n order a cknowledgment delivered to Buyer, Seller warra nts to Buyer that the Product shall be free of defects in materi als a nd workma nshi p. W ith the exception of the negoti ated warra nty periods; the warra nty for the touchmonitor a nd components of the product is 3 years.
THESE REMEDIES SHALL BE THE BUYER’S EXCLUSIVE REMEDIES FOR BREACH OF W ARRANTY . EXCEPT FOR THE EXPRESS W ARRANTY SET FOR TH ABOVE, SELLER G RANTS NO OTHER W ARRANTIES, EXPRESS OR IMPLIED BY ST A TU.
Numerics 15.0" LCD T ouchmonitor (1522L-XXWB-1-XX-G) Dimensions, 44 A About T ouchmonitor Adjustments, 21 Acoustic Pulse Recognition Specifications, 37 Auto Adjust, 24 B Ba se Bottom Vi ew , 7 Br.
N Native Resolution, 29 O Optical, Acoustic Pulse Recognition, 37 Optical, Infrared T ouchscreen, 36 Optical, IntelliT ouch, 35 Optimizing the LCD Display , 14 OSD Control Options, 24 OSD Left/Right, .
© 2007 Elo T ouchSystems Inc. Printed in USA Check out Elo’s Web site! www.elotouch.com Get the latest... • Product information • Specifications • News on upcoming events • Press release • Software drivers Getting in Touch with Elo To find out more about Elo’s extensive range of touch solutions, visit our Web site at www.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Elo TouchSystems Elo Entuitive 3000 Series 1522L c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Elo TouchSystems Elo Entuitive 3000 Series 1522L - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Elo TouchSystems Elo Entuitive 3000 Series 1522L, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Elo TouchSystems Elo Entuitive 3000 Series 1522L va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Elo TouchSystems Elo Entuitive 3000 Series 1522L, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Elo TouchSystems Elo Entuitive 3000 Series 1522L.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Elo TouchSystems Elo Entuitive 3000 Series 1522L. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Elo TouchSystems Elo Entuitive 3000 Series 1522L ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
