Manuel d'utilisation / d'entretien du produit H55H-M du fabricant Elitegroup
Aller à la page of 70
Preface Preface Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author .
ii Preface Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: • This device may not cause harmful interference, and • T.
iii T T T T T ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS Preface i Chapter 1 1 Introducing the Motherboard 1 Introduction...................................................................................1 Feature.
iv PCI/PnP Setup...................................................................35 PC Health Status................................................................36 Fr equency/V oltage Control................................................40 Load Default Settings.
1 Introducing the Motherboard Chapter 1 Introducing the Motherboard Introduction Thank you for choosing the H55H-M motherboard. This motherboard is a high performance, enhanced function motherboard de.
2 Introducing the Motherboard Feature The motherboard uses an LGA1156 type of Intel ® Core TM i7-800/Core TM i5/ Core TM i3 and Pentium ® processor series that carries the following features: Proces.
3 Introducing the Motherboard Audio This motherboard may support either of the following Audio chipsets: The motherboard comes with the following expansion options: • One PCI Express slot for Graphic Interface • T wo PCI Express x1 slots • One 32-bit PCI v2.
4 Introducing the Motherboard • Intel H55 Express Chipset • LGA1 156 socket for latest Intel ® Core TM i7-800/Core TM i5/ Core TM i3 and Pentium ® processor series • Supports “Hyper-Threading” technology CPU • DMI 2.
5 Introducing the Motherboard Motherboard Components.
6 Introducing the Motherboard T able of Motherboard Components This concludes Chapter 1. The next chapter explains how to install the motherboard. LABE L COMPONENTS LGA1156 socket for In tel ® Core T M i7-800 / Core T M i5 / Core T M i3 a n d P e n t iu m ® p ro ce s so r s e ries 2.
7 Installing the Motherboard Chapter 2 Installing the Motherboard Safety Precautions • Follow these safety precautions when installing the motherboard • Wear a grounding strap attached to a ground.
8 Installing the Motherboard Checking Jumper Settings This section explains how to set jumpers for correct configuration of the motherboard. Setting Jumpers Use the motherboard jumpers to set system configuration options. Jumpers with more than one pin are numbered.
9 Installing the Motherboard Checking Jumper Settings The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled. Jumper Settings T o avoid the system instability after clearing CMOS, we recommend users to enter the main BIOS setting page to “Load Default Settings” and then “Save and Exit Setup”.
10 Installing the Motherboard Installing Hardware Installing the Processor Caution: When installing a CPU heatsink and cooling fan make sur e that you DO NOT scratch the motherboard or any of the surface- mount resistors with the clip of the cooling fan.
11 Installing the Motherboard CPU Installation Procedure The following illustration shows CPU installation components. 1. T o achieve better airflow rates and heat dissipation, we suggest that you use a high quality fan with 3800 rpm at least. CPU fan and heatsink installation procedures may vary with the type of CPU fan/ heatsink supplied.
12 Installing the Motherboard Installing Memory Modules This motherboard accommodates two memory modules. It can support two 240-pin DDR3 1333/1066. The total memory capacity is 8 GB. Y ou must install at least one module in any of the two slots. The total memory capacity is up to 8 GB.
13 Installing the Motherboard T able A: DDR3 (memory module) QVL (Qualified V endor List) The following DDR3 1333/1066 memory modules have been tested and qualified for use with this motherboard.
14 Installing the Motherboard Installing Add-on Cards The slots on this motherboard are designed to hold expansion cards and connect them to the system bus. Expansion slots are a means of adding or enhancing the motherboard’s features and capabilities.
15 Installing the Motherboard Follow these instructions to install an add-on card: 1 Remove a blanking plate from the system case corresponding to the slot you are going to use. 2 Install the edge connector of the add-on card into the expansion slot. Ensure that the edge connector is correctly seated in the slot.
16 Installing the Motherboard Connecting Optional Devices Refer to the following for information on connecting the motherboard’s optional devices: SA T A1~6: Serial A T A connectors These connectors are used to support the new Serial A T A devices for the highest data transfer rates (3.
17 Installing the Motherboard F_USB1~2: Front Panel USB headers The motherboard has four USB ports installed on the rear edge I/O port array . Additionally , some computer cases have USB ports at the front of the case. If you have this kind of case, use auxiliary USB connector to connect the front-mounted ports to the motherboard.
18 Installing the Motherboard Installing a Hard Disk Drive/CD-ROM/SA T A Hard Drive This section describes how to install storage devices such as a hard disk drive and a CD-ROM drive. SA T A cable (optional) SA T A power cable (optional) About SA T A Connectors Y our motherboard features six SA T A connectors supporting a total of six drives.
19 Installing the Motherboard Refer to the illustration below for proper installation: 1 Attach either cable end to the connector on the motherboard. 2 Attach the other cable end to the SA T A hard drive. 3 Attach the SA T A power cable to the SA T A hard drive and connect the other end to the power supply .
20 Installing the Motherboard Connecting I/O Devices The backplane of the motherboard has the following I/O ports: PS2 Keyboard Use the left PS/2 port to connect a PS/2 pointing device. PS2 Mouse Use the right PS/2 port to connect a PS/2 keyboard. DVI Port Use the DVI port to connect the monitor .
21 Installing the Motherboard Connecting Case Components After you have installed the motherboard into a case, you can begin connecting the motherboard components. Refer to the following: 1 Connect the CPU cooling fan cable to CPU_F AN . 2 Connect the standard power supply connector to A TX_POWER .
22 Installing the Motherboard Users please note that the fan connector supports the CPU cooling fan of 1.1A ~ 2.2A (26.4W max) at +12V . CPU_F AN: CPU Cooling F AN Power Connector 1 GND System Ground 3 Sense Sensor 4 PWM PWM Pi n Signal Name Function 2 +12V Power +12V A TX_POWER: A TX 24-pin Power Connector Pin Signal Name Pin Signal Name 1 +3.
23 Installing the Motherboard A TX12V4P: A TX 12V Power Connector Pi n Signal Name 4 +12V 3 +12V 2 Ground 1 Ground.
24 Installing the Motherboard Power/Sleep/Message waiting LED Connecting pins 2 and 4 to a single or dual-color, front panel mounted LED provides power on/off, sleep, and message waiting indication. Front Panel Header The front panel header (F_P ANEL) provides a standard set of switch and LED headers commonly found on A TX or micro-A TX cases.
25 Using BIOS About the Setup Utility The computer uses the latest “American Megatrends Inc. ” BIOS with support for Windows Plug and Play . The CMOS chip on the motherboard contains the ROM setup instructions for configuring the motherboard BIOS.
26 Using BIOS Press the delete key to access the BIOS Setup Utility . CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. v02.
27 Using BIOS Using BIOS When you start the Setup Utility , the main menu appears. The main menu of the Setup Utility displays a list of the options that are available. A highlight indicates which option is currently selected. Use the cursor arrow keys to move the highlight to other options.
28 Using BIOS For the purpose of better product maintenance, we reserve the right to change the BIOS items pr esented in the manual. The BIOS setup screens shown in this chapter are for r eference only . Please visit our website for updated manual. Standard CMOS Setup This option displays basic information about your system.
29 Using BIOS SA T A1~6 CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. SA T A1 Help Item Select the type of device connected to the system. This motherboard supports six SA T A channels and each channel allows one SA T A device to be installed.
30 Using BIOS Advanced Setup This page sets up more advanced information about your system. Handle this page with caution. Any changes can affect the operation of your computer . CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Advanced Setup Help Item For the processor its CPUID belows 0F41h.
31 Using BIOS 1st/2nd/3rd Boot Device ( Hard Drive/CD/DVD/Removable Dev .) Use this item to determine the device order the computer used to look for an operating system to load at start-up time. The devices showed here will be different depending on the exact devices installed on your motherboard.
32 Using BIOS Advanced Chipset Setup This page sets up more advanced information about your system. Handle this page with caution. Any changes can affect the operation of your computer . CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
33 Using BIOS Integrated Peripherals This page sets up some parameters for peripheral devices connected to the system. CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
34 Using BIOS Power Management Setup This page sets up some parameters for system power management operation. Select the ACPI state used for System Suspend. CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Power Management Setup ACPI Suspend T ype (S3) Use this item to define how your system suspends.
35 Using BIOS Press <Esc> to return to the main menu setting page. Resume on RTC Alarm (Disabled) The system can be turned off with a software command. If you enable this item, the system can automatically resume at a fixed time based on the system’s R TC (realtime clock).
36 Using BIOS PC Health Status On motherboards support hardware monitoring, this item lets you monitor the parameters for critical voltages, temperatures and fan speeds. Help Item CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
37 Using BIOS SMART Fan Mode (Normal) This item allows you to select the fan mode (Normal, Quiet, Silent, or Manual) for a better operation environment. If you choose Normal mode, the fan speed will be auto adjusted depending on the CPU temperature. If you choose Quite mode, the fan speed will be auto minimized for quiet environment.
38 Using BIOS CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Smart Fan Function Help Item F10: Save ESC: Exit +/-/: V alue Enter : Select F9: Optimized Defaults F1:General Help : Move Options Press <Esc> to return to the Smart Fan Function page.
39 Using BIOS ECS supports the latest PECI host technology . While using Core TM 2 Quad or Core TM 2 Duo CPU which supports PECI, the original images of the BIOS item “PC Health Status” and “Smart F AN Function” will be r eplaced by PECI mode and negative number .
40 Using BIOS Spread Spectrum (Enabled) If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic Interference) generated by the system. Auto Detect DIMM/PCI Clk (Enabled) When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
41 Using BIOS Supervisor Password (Not Installed) This item indicates whether a supervisor password has been set. If the password has been installed, Installed displays. If not, Not Installed displays. Press <Esc> to return to the main menu setting page.
42 Using BIOS Save & Exit Setup Highlight this item and press <Enter> to save the changes that you have made in the Setup Utility and exit the Setup Utility . When the Save and Exit dialog box appears, select [OK] to save and exit, or select [Cancel] to return to the main menu.
43 Using BIOS Updating the BIOS Y ou can download and install updated BIOS for this motherboard from the manufacturer’s W eb site. New BIOS provides support for new peripherals, improve- ments in performance, or fixes for known bugs. Install new BIOS as follows: This concludes Chapter 3.
44 Using BIOS Memo.
45 Using the Motherboard Software Chapter 4 Using the Motherboard Software Auto-installing under Windows XP/V ista/7 The support software DVD-ROM/CD-ROM disc loads automatically under Windows XP/V ista/7. When you insert the DVD-ROM/CD-ROM disc in the DVD-ROM/CD- ROM drive, the autorun feature will automatically bring up the install screen.
46 Using the Motherboard Software Drivers T ab Setup Click the Setup button to run the software installation program. Select from the menu which software you want to install. Browse CD The Browse CD button is the standard Windows command that al- lows you to open Windows Explorer and show the contents of the support disk.
47 Using the Motherboard Software 2. Click Next. The following screen appears: 3. Check the box next to the items you want to install. The default options are recom- mended. 4. Click Next run the Installation Wizard. An item installation screen appears: 5.
48 Using the Motherboard Software Manual Installation Insert the disk in the DVD-ROM/CD-ROM drive and locate the P A TH.DOC file in the root directory .
Setting Up eJIFFY 49 Introduction eJIFFY is a fast boot program under Linux. Instead of waiting Windows O.S to start execution, eJIFFY is ready to provide users the instant enjoyment on web browsing, photo review and online chat just within several seconds after boot up.
Setting Up eJIFFY 50 Installation and BIOS Setup DVD Activation Finish the DVD utility setup, and then set the BIOS to complete eJIFFY activation. 1. Insert ECS software utility DVD and enter below “Utilities” screen. Click eJIFFY feature item to install.
Setting Up eJIFFY 51 3. After setting up eJIFFY under Windows, you can switch eJIFFY display/keyboard language from English to your local language. The changes will be applied after rebooting. Note: The keyboard language selection list offers several more regional keyboard setups to switch with the default English typing.
Setting Up eJIFFY 52 4. Restart your computer after eJIFFY installation. Press <DEL> or click the BIOS Setup button on the post screen to enter the BIOS setup page after boot up. 5. And then enter the Advanced Setup page to enable the item ECS eJIFFY Func- tion .
Setting Up eJIFFY 53 Entering eJIFFY The post screen appears within several seconds after boot up and it has three buttons on it, Operating system, eJIFFY and BIOS Setup. If you click eJIFFY , the following screen will appear . And If you make no choice it will enter the normal OS automatically after ten seconds.
Setting Up eJIFFY 54 Feature Icons The following illustration shows the main feature icons that eJIFFY provides on the menu. ePix: Photo viewing. eW eb: Fir efo x for web br owsing/webmail and watching flash video . Shows eP al on-line connection status.
Setting Up eJIFFY 55 to open the language control panel. Keyboard Language Setup Usage F AQ Language Control P anel: Besides setting English as the default interface, eJIFFY offers multi-language displays and keyboard settings for language- switch. Open the language control panel to select a preferable language setting.
Setting Up eJIFFY 56 Click the language bar here. Move your mouse pointer on the text box and press Ctrl+Space. The language bar will then appear as fol- lows.
Setting Up eJIFFY 57 How to change display language? Open the Language Control Panel and click to show the display language list. Check your desired display language.
Setting Up eJIFFY 58 1. Select the image you want to save and press the right key of your mouse to show the menu, then click the option “ Save Image As” from the menu. Q2: How to save image file through eWeb? 3. eW eb supports to open video/audio files online in Flash player format.
Setting Up eJIFFY 59 Enter the ePix window , then click the icon “Folder” located in the upper left-hand corner, then follow the path for the files you have saved to view the image files. Q1: How to find image files saved in hard disk through ePix? ePix: Photo viewing.
Setting Up eJIFFY 60 Q2: How to use the fit function under slide show? 1. Click “Edit” and select “Preferences” option from the menu. 2. Click “V iewer” and choose “Keep previous zoom” in “After loading an image”. Close the window and you can use the fit function under slide show now .
Setting Up eJIFFY 61 “Unmount” is to safely remove the storage devices. T o unplug the external storage devices such as USB drives, users need to clik the “Unmount” prompt as the following picture shows, then the icon will change to , you can remove the device now .
Setting Up eJIFFY 62 Memo.
63 Trouble Shooting Chapter 6 Trouble Shooting Start up problems during assembly After assembling the PC for the first time you may experience some start up problems. Before calling for technical support or returning for warranty , this chapter may help to address some of the common questions using some basic troubleshooting tips.
64 Trouble Shooting c) The PC suddenly shuts down while booting up. 1. The CPU may experience overheating so it will shutdown to protect itself. Ensure the CPU fan is working properly . 2. From the BIOS setting, try to disable the Smartfan function to let the fan run at default speed.
Power Bu on is presse d but PC fails to s tart. Y es Check if Power Supply Unit ( PSU ) is workin g No No Any Beep sound ？ No CLR CMOS and check if CPU 12V power is connecte d art the PC st Re Probl.
66 Trouble Shooting Memo.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Elitegroup H55H-M c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Elitegroup H55H-M - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Elitegroup H55H-M, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Elitegroup H55H-M va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Elitegroup H55H-M, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Elitegroup H55H-M.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Elitegroup H55H-M. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Elitegroup H55H-M ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
