Manuel d'utilisation / d'entretien du produit TX235 du fabricant Alamo
Aller à la page of 150
©2007 Alamo Group Inc. TX235 Published 02/07 Part NO. 00767122C OPERA T OR’S MANUAL RHINO ® 1020 S. Sangamon A ve. Gibson City , IL 60936 800-446-5158 Email: parts@servis-rhino.com TURF FLEX FINISHING MOWER This Opera tor's Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times.
T o the Owner/Operator/Dealer All implements with moving p arts are potentially hazardou s. There is no substitute for a cautious, safe-minded operator who reco gnizes the potential hazards and follows reasonable safety practices.
In order to reduce accidents and enha nce the safe operation of mowers, Alamo Gr oup Ag Division, in cooperation with other industry ma nufacturers has developed the AE M/FEMA Industrial and Agricul- tural Mower Safety Practices video and guide book.
Alamo Gr oup Ag. Division is willing to pr ovide one (1) AEM Mower Safety Practices V ideo Please Send Me: VHS Format – AEM/FEMA Mower Operator Safety V ideo DVD Format – AEM/FEMA Mower Operator S.
T ABLE OF CONTENTS SAFETY SECTION ........ ................................. .......................................................... ........... 1- 1 General Safety Instructions and P ractices ................... ................ ................. .
Connecting Mower Hydraulics ........ ................ .... ......... ............. ............. ................ ............. ....... ................ ...... 4-10 SETTING THE MOWER ....... ............. ............. ................ ............. .
Safety Section 1-1 © 2007 Alamo Group In c. SAFETY SECTION.
SAFETY TX235 02/07 Safety Section 1-2 © 2007 Alamo Group In c. SAFETY General Safety Instruct ions and Practices A careful operator is the best opera tor .
SAFETY TX235 02/07 Safety Section 1-3 © 2007 Alamo Group In c. SAFETY Operator Safety Instr uctions and Practices Engine Exhaust, some of its constitue nts, a nd cert ain vehicle compone nts cont ain or emit chemicals known to the st ate of California to cause cancer and birth defects or oth er reproductive harm.
SAFETY TX235 02/07 Safety Section 1-4 © 2007 Alamo Group In c. SAFETY Always read carefully and comply fully with the manufacturer ’s instructions when handling oil, solvents, cleansers, a nd any other chemical agent. (SG-22) KEEP A W A Y FROM ROT A TING ELEMEN TS to prevent ent anglement and possible serious injury or death.
SAFETY TX235 02/07 Safety Section 1-5 © 2007 Alamo Group In c. SAFETY Equipment Operation Safety Instructions and Practices Avoid contact with hot su rfaces of the engine or muffle r . Use glo ves and eye protection when servicing hot component s. Contact with a hot surface or fluid can cause serious injury from burns or scalding.
SAFETY TX235 02/07 Safety Section 1-6 © 2007 Alamo Group In c. SAFETY Do not operate Mower if excessive vibration exists. Shut down PTO and the T ractor engine. In spect the Mower to determ ine the so ur ce of the vibration. If Mower blades are missing or dam aged replac e them immed iately .
SAFETY TX235 02/07 Safety Section 1-7 © 2007 Alamo Group In c. SAFETY S t art tractor only when properly seated in the T r actor seat. S tarting a tractor in gear can resu lt in injury or death. Read th e T ractor operators manual for proper st arting instruction s.
SAFETY TX235 02/07 Safety Section 1-8 © 2007 Alamo Group In c. SAFETY Mow only in conditions where y ou have clear visibility in daylight or with adequate artificial lighting. Never mow in darkness o r foggy cond itions where you can not clearly see at least 100 yards(90 m) in front and to the sides of the tractor and mower .
SAFETY TX235 02/07 Safety Section 1-9 © 2007 Alamo Group In c. SAFETY Avoid mo wing in reverse direction when poss ible. Check to m ake sure there are no persons behind the mower and use extreme car e when mowing in reverse. Mow only at a slow ground speed whe re you can safely op erate and control the tractor and mower .
SAFETY TX235 02/07 Safety Section 1- 10 © 2007 Alamo Group In c. SAFETY Connecting or Disconnecting I m plement Safety Instructions and Practices Rotary Mowers are capa ble under adverse conditions of throwing objects for great dist ances (300 feet or more) an d causing serious injury or death.
SAFETY TX235 02/07 Safety Section 1-11 © 2007 Alamo Group In c. SAFETY T ransporting Safety Instructions and Practices Always shut the T ractor completely down , place the transmission in p ark, and set the parking brake before you or anyone el se attemp ts to connect or disconnect the Implemen t and T ractor hitc hes.
SAFETY TX235 02/07 Safety Section 1- 12 © 2007 Alamo Group In c. SAFETY T ransport only at speeds where you can maintain con trol of the equipment. Seriou s accidents and injuries can result from o perating this equipment at high speeds. Underst and the T ractor and Implem ent and how it handles before transporting on stree ts and highways.
SAFETY TX235 02/07 Safety Section 1-13 © 2007 Alamo Group In c. SAFETY Maintenance and Service Safet y Instructions and Practices Y our driving vision may be reduced or impaired by the tractor , cab, o r implement.
SAFETY TX235 02/07 Safety Section 1- 14 © 2007 Alamo Group In c. SAFETY Periodically inspect all moving part s for wear and replace when necessary with au thorized servic e part s. Look for loose fasteners, worn or broken p arts, and leaky or loose fittings.
SAFETY TX235 02/07 Safety Section 1-15 © 2007 Alamo Group In c. SAFETY S torage and Parking Safety Instructions and Practices Concluding Safety Instr uctions and Practices PA R T S I N F O R M AT I O.
SAFETY TX235 02/07 Safety Section 1- 16 © 2007 Alamo Group In c. SAFETY Decal Location NOTE: Rhino supplies safety deca ls on this product to promote safe operation.
SAFETY TX235 02/07 Safety Section 1-17 © 2007 Alamo Group In c. SAFETY ITEM P ART NO. QTY LEVEL DESCRIPTION 1. 00725746 1 PELIGRO Get Manuals T ranslated 2. 00753840 3 DANGER Folding Wings 3. 00756004 ((4)) DANGER D/L Shield missing DO NOT OPERA TE 3A.
SAFETY TX235 02/07 Safety Section 1- 18 © 2007 Alamo Group In c. SAFETY Decal Description Peligro T ranslation, If yo u do not know how to read English, please find someone who knows how to read English. P/N 00725746 DANGER! S tay clear when lowering or raising wings.
SAFETY TX235 02/07 Safety Section 1-19 © 2007 Alamo Group In c. SAFETY W ARNING! Ne ver use your hand to check for oil leaks. Always use paper or cardb oard. P/N 00756059 DANGER! Make certain that drivelines are correct length and are se curely attach ed.
SAFETY TX235 02/07 Safety Section 1- 20 © 2007 Alamo Group In c. SAFETY PELIGRO! S p anish T ranslati on for Driveline Safety P/N 00773723.
SAFETY TX235 02/07 Safety Section 1-21 © 2007 Alamo Group In c. SAFETY DANGER! - Multi Hazard - Failure to follow Safety Messages and Operating Instructions can cause serious bodily injury or even death to Operator and Others in area.
SAFETY TX235 02/07 Safety Section 1- 22 © 2007 Alamo Group In c. SAFETY W ARNING! D isengage PTO before folding wings to prevent inst ant failure of drivelines and possible severe bodily injury o r death.
SAFETY TX235 02/07 Safety Section 1-23 © 2007 Alamo Group In c. SAFETY DANGER! Keep Away Thrown Objects. Inspect the area before m owing for potential mower hazards. Remove or avoid all foreign objects such as wire, cable, met al objects, and all other fore ign material.
SAFETY TX235 02/07 Safety Section 1- 24 © 2007 Alamo Group In c. SAFETY DANGER! - Multi Hazard - Failure to follow Safety Messages and Operating Instructions can cause serious bodily injury or even death to Operator and Others in area.
SAFETY TX235 02/07 Safety Section 1-25 © 2007 Alamo Group In c. SAFETY RHINO LOGO P/N D301 Slow Moving V ehicle Decal. Keep SMV reflector clean and visible. DO NOT transpo rt or operate without the SM V . P/N 03200347 Red Reflector . Keep reflectors clean and visible.
SAFETY TX235 02/07 Safety Section 1- 26 © 2007 Alamo Group In c. SAFETY Information that Grease Fittin g is present and must apply grease. P/N 000678 10 Hour - Lubrication Decal P/N 00755691 Attention! Do not operate u n til all slip clutches are properly adjust an d are not frozen.
SAFETY TX235 02/07 Safety Section 1-27 © 2007 Alamo Group In c. SAFETY Operator's Manu al (with repair p arts) and warra nty was attached to this implement during final inspection. P/N 00763977 IMPORT ANT! Required For Jackshaft Unit. Suggested for standa rd shaft.
SAFETY TX235 02/07 Safety Section 1- 28 © 2007 Alamo Group In c. SAFETY Name Decal -TURF FLEX 00763535 MODEL Name - TX235 00769825 Read Operato r ’s Manual! The operator ’s ma nual is located inside this canister . If the manual is missing order one from you r dealer .
SAFETY TX235 02/07 Safety Section 1-29 © 2007 Alamo Group In c. SAFETY Federal Laws and Regulations This section is intend ed to explain in br oad terms the co ncept and effect of federal la ws and regulations concerning employe r and employee equipme nt operat ors.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Introduction Section 2-1 © 2007 Alamo Group Inc. INTRODUCTION SECTION.
INTRODUCTION TX235 02/07 Introduction Section 2-2 © 2007 Alamo Group Inc. INTRODUCTION This Rotary Mower is designed with care and built with quality materials by skilled worker s. Proper assembly , maintenance, and ope rating practices, as described in this manual, will help t he owner/operator get years of satisfactory service from the machine.
INTRODUCTION TX235 02/07 Introduction Section 2-3 © 2007 Alamo Group Inc. INTRODUCTION The T urf Flex is designed for light-duty cutting such as lawn ma intenance plus small weed and grass con trol. With a reasonable amount of prev entiv e maintenance, the mower will pr ovide years of dependable service.
INTRODUCTION TX235 02/07 Introduction Section 2-4 © 2007 Alamo Group Inc. INTRODUCTION Attention Owner/Operator BEFORE OPERA TING THIS MACHINE: 1. Carefully read the Operator’s Manual, completely understand the Safety Messages and instructions, and know how to operate correctly both the tractor and implement.
Assembly Section 3-1 © 2007 Alamo Group In c. ASSEMBL Y SECTION.
ASSEMBLY TX235 02/07 Assembly Section 3-2 © 2007 Alamo Group In c. ASSEMBL Y Operating with PT O speed over 540 RPM can ca use excessive vibration with subsequent machine failure which can ca use serious injury or even death. Never exceed 6 00 RPM. DEALER SET -UP INSTRUCTIONS Assembly of this mower is the resp onsibility of the Rhino dealer .
ASSEMBLY TX235 02/07 Assembly Section 3-3 © 2007 Alamo Group In c. ASSEMBL Y SWIVEL AND LIFT ARM A TT ACHMENT Attach the Swivel Asse mbly (1) on the Lift Arm s (2) usin g chrome plat ed Attaching Pin (3). Retain with 1/2" x 1- 12" bolt (4), flatwasher (5), and locknut (6).
ASSEMBLY TX235 02/07 Assembly Section 3-4 © 2007 Alamo Group In c. ASSEMBL Y HYDRAULIC CYLINDER A TT ACHMENT Attach the Rear Hydraulic Cy linder to the Main Frame with Fittings pointing up. Ret ain with Pin and Cotter Pin. Asm-R- 0324. Attach the Wing Hydraulic Cylinder s to the Ma in Frame and toggle links with pins provided.
ASSEMBLY TX235 02/07 Assembly Section 3-5 © 2007 Alamo Group In c. ASSEMBL Y CASTER WHEEL A T T ACHM ENTS - REAR MOWER Attach the right and lef t Axle Arm Weldment (1) to the deck with bolts (2) flatwa sher (3), and locknuts (4).
ASSEMBLY TX235 02/07 Assembly Section 3-6 © 2007 Alamo Group In c. ASSEMBL Y REAR MOWER A TT ACHMENT Install the Rear Lif t Arm (1) on the Main Frame with a Frame Pin (2) and secure Pin with Bolt (3). A TTENTION: Do not drive pin in with hammer , this will damage the Pivot T u be.
ASSEMBLY TX235 02/07 Assembly Section 3-7 © 2007 Alamo Group In c. ASSEMBL Y DRIVELINE A TT ACHMENT Before starting a ssembly , make certain that all paint, di rt and grease ar e removed from gear box shaft (1). T o ease assem bly , ap ply a light coa t of grease to splines and assemble.
ASSEMBLY TX235 02/07 Assembly Section 3-8 © 2007 Alamo Group In c. ASSEMBL Y HYDRAULIC HOSE A TT ACHMENT Remove the caps from Hydraulic Manifo ld (6) on the Main Frame, Asm-R-0330.
ASSEMBLY TX235 02/07 Assembly Section 3-9 © 2007 Alamo Group In c. ASSEMBL Y.
ASSEMBLY TX235 02/07 Assembly Section 3-10 © 2007 Alamo Group In c. ASSEMBL Y FIELD ASSEMBL Y 1. Loop ends back through wel ded link on lock bar and then inside of braid by forming a hole 16” from end. 2. Adjust length s as shown to give 8” overlap and 4” loop.
Operation Sec tion 4-1 © 2007 Alamo Group In c. OPERA TION SECTION.
OPERATION TX235 02/07 Operation Section 4 -2 © 2007 Alamo Group Inc. OPERA TION RHINO TX235 TURF FLEX FINISHING MOWER OPER A TION INSTRUCTIONS Rhino TURF FLEX mowers are manufact ured with quality material by sk illed workers. These mowers are designed for cutting gra ss and small weeds.
OPERATION TX235 02/07 Operation Section 4 -3 © 2007 Alamo Group In c. OPERA TION 1. S t andard Equipment and Specifications Cutting Width 284” Overall Width 287 ” T ransport Wid th 142” T ransp.
OPERATION TX235 02/07 Operation Section 4 -4 © 2007 Alamo Group Inc. OPERA TION 2. OPERA TOR REQUIREMENTS Safe operation of the unit is the responsibility of a qualifi ed operator .
OPERATION TX235 02/07 Operation Section 4 -5 © 2007 Alamo Group In c. OPERA TION 3. TRACT OR REQUIREMENTS The tractor used to operate the mower must ha ve the power capacity to lif t, pull, and operate the Power T ake Off (PT O) at the mower ’s rated speed while traveling at a ground speed between 2 a nd 5 MPH.
OPERATION TX235 02/07 Operation Section 4 -6 © 2007 Alamo Group Inc. OPERA TION 3.3 Drawbar The tractor dr awbar must be positioned at a certain length based on the oper ating speed of the mowe r to ensure proper dr iveline operation. 540 RPM mowers require the drawbar length measured from shaft en d to hitch pin hole to be positioned at 14 ”.
OPERATION TX235 02/07 Operation Section 4 -7 © 2007 Alamo Group In c. OPERA TION Never oper ate the Tractor and Mower if the Impl ement input driveline is directly connected to the T ractor transmission .
OPERATION TX235 02/07 Operation Section 4 -8 © 2007 Alamo Group Inc. OPERA TION BEFORE leaving the tracto r seat, alw ays set the parkin g brake an d/or set the tractor transmission in parking ge ar , disengage the PT O, stop the engine, remove the key , and wait for all moving part s to stop.
OPERATION TX235 02/07 Operation Section 4 -9 © 2007 Alamo Group In c. OPERA TION 6.1 Connecting the Mowe r T ongue to the T ractor 1. The tractor must be equip ped to operate at 540 RPM PTO speed and the drawba r length at 14”. 2. Using the parking ja ck, position the tongue clevis to the height of the tractor drawbar .
OPERATION TX235 02/07 Operation Section 4- 10 © 2007 Alamo Group Inc. OPERA TION 6.3 Connecting Mo wer Hydraulics 1. With the tractor sh ut down and secured in position, mo ve the hydr aulic remote valve lever back and for the seve ral times or place the hydraulic lever in the float position to relieve all hydraulic pressure.
OPERATION TX235 02/07 Operation Section 4- 11 © 2007 Alamo Group In c. OPERA TION Cutting Height Adjustment 1. Using the tractor hydrau lics, raise the mowers of f the ground and support un der it with secu re blocking s o not to let the mower drift down during main tenance.
OPERATION TX235 02/07 Operation Section 4- 12 © 2007 Alamo Group Inc. OPERA TION 8.1 Driveline Length Check When fitting the mower to the tractor , the telescoping dr iveline must be inspected to ens.
OPERATION TX235 02/07 Operation Section 4- 13 © 2007 Alamo Group In c. OPERA TION Shorten the driveline profiles as follows : • Remove the driveline from the tractor . • Position the mower to the point with the shortest d is- tance between the tractor PTO shaft and cutter gear- box.
OPERATION TX235 02/07 Operation Section 4- 14 © 2007 Alamo Group Inc. OPERA TION 8.2 Constant V elocity (CV) Driveline For mowers equipped with a Constant V elocity (CV) dr iveline, the maximum turning angle b etween the tractor and mower must be determined to ensure the jo int angle does not over-extend which can cause CV joint damage.
OPERATION TX235 02/07 Operation Section 4- 15 © 2007 Alamo Group In c. OPERA TION Do not turn so sharp or lif t mo wer so high to produce a severe "knocking" of the Driveline which will cause accelerated wear and breakage of drive train components and could result in possible injury from the separated Driveline sections.
OPERATION TX235 02/07 Operation Section 4- 16 © 2007 Alamo Group Inc. OPERA TION 9.1 T racto r Pre-Operation Inspection/Service Refer to the tr actor operator ’s ma nual to ensure a complete pre-operation inspection and scheduled service is performed accordi ng to the manufacturers recommenda tions.
OPERATION TX235 02/07 Operation Section 4- 17 © 2007 Alamo Group In c. OPERA TION • Check that the main driveline securely attached to the tractor and the locking collar is seated in the groove of the PT O Shaft. • Ensure wing drivelines are secure at both ends.
OPERATION TX235 02/07 Operation Section 4- 18 © 2007 Alamo Group Inc. OPERA TION • Inspect oil level in all gearboxes and replenish if needed. A low oil level is a warning sign that the gearbo x may be cracked or it s seal damaged and needs to be replaced.
OPERATION TX235 02/07 Operation Section 4- 19 © 2007 Alamo Group In c. OPERA TION • Inspect mower tire condition , wheel bearings, and lug nut torque. • Check the condition of the wing hinge pins. • Check all the overall co ndition of th e mower main frame.
OPERATION TX235 02/07 Operation Section 4- 20 © 2007 Alamo Group Inc. OPERA TION Finish Mower PRE-OPERA TION Inspection Mower ID#________________________Make____________________ Date:________________.
OPERATION TX235 02/07 Operation Section 4- 21 © 2007 Alamo Group In c. OPERA TION T ractor PRE-OPERA TION Inspection T ractor ID#________________ Make ____________________ Date: ________________ Shif.
OPERATION TX235 02/07 Operation Section 4- 22 © 2007 Alamo Group Inc. OPERA TION 10. DRIVING THE TRACTOR AND IMPLEMENT Safe tractor transport req uires the operator possess a thoroug h knowledge of the model being ope rated and precautions to t ake while driving with an att ached implem ent.
OPERATION TX235 02/07 Operation Section 4- 23 © 2007 Alamo Group In c. OPERA TION 10.1 St arting the T ractor The procedure to st art the tractor is model specific. Refer to the tractor operator’s manual for st arting procedures for your p articular tractor .
OPERATION TX235 02/07 Operation Section 4- 24 © 2007 Alamo Group Inc. OPERA TION 10.3 T ransporting the Cutter 1. Raise wings to full height. 2. Make certain th at lock tab engag es into lock bar .
OPERATION TX235 02/07 Operation Section 4- 25 © 2007 Alamo Group In c. OPERA TION 10.4 Operating the T r actor and Mower S t art off by o perating at a slow speed and gradually in cr ease your sp eed while mai n taining complete control of the tractor and mower .
OPERATION TX235 02/07 Operation Section 4- 26 © 2007 Alamo Group Inc. OPERA TION 10.5 Crossing Ditches and Steep Inclines When crossing ditches with steep banks o r going up sharp inclines, it is pos.
OPERATION TX235 02/07 Operation Section 4- 27 © 2007 Alamo Group In c. OPERA TION Inclines and ditches should be app roached along a line which is at an an gle as shown. This type of path will reduce the possib ility of over-collapse of the driveline and re sulting damag e.
OPERATION TX235 02/07 Operation Section 4- 28 © 2007 Alamo Group Inc. OPERA TION 1 1.2 Bystander/Passerby Precautions If a bystan der comes within 100 yards of the trac tor while the mower is being op erated, stop the tractor at once, idle the engine and disengage the PT O.
OPERATION TX235 02/07 Operation Section 4- 29 © 2007 Alamo Group In c. OPERA TION Rotary Mowers are capa ble under adverse conditions of throwing objects for great dist ances (300 feet or more) an d causing serious injury or death. Follow safety messag es carefully .
OPERATION TX235 02/07 Operation Section 4- 30 © 2007 Alamo Group Inc. OPERA TION 1 1.5 Operating the Mower Only operate the mower from the tractor operator’s seat with the seatbelt se curely fastened on a ROPS or cab equipped tractor . The mower is designed for cutting grass and small weeds.
OPERATION TX235 02/07 Operation Section 4- 31 © 2007 Alamo Group In c. OPERA TION Avoid mo wing in reverse direction when poss ible. Check to m ake sure there are no persons behind the mower and use extreme car e when mowing in reverse. Mow only at a slow ground speed whe re you can safely op erate and control the tractor and mower .
OPERATION TX235 02/07 Operation Section 4- 32 © 2007 Alamo Group Inc. OPERA TION Then lower the mower to the desired height and mow the veget ation a second time. If possible , select a mowing p attern that is at a 90 degree angle to the first pass to reduce streaking for a more uniform cut.
OPERATION TX235 02/07 Operation Section 4- 33 © 2007 Alamo Group In c. OPERA TION 12. DISCONNECTING THE MOWER FROM THE TRACTOR Before disconnecting the mower , the PTO must be disengaged and all motion at a complete stop. Move the mower to a level storage location and lower the center section and both win gs to the ground.
OPERATION TX235 02/07 Operation Section 4- 34 © 2007 Alamo Group Inc. OPERA TION 13. MOWER STORAGE It is recommended that the mower be stored with the c enter section and both wings fully lowered to g round level.
OPERATION TX235 02/07 Operation Section 4- 35 © 2007 Alamo Group In c. OPERA TION If the tractor ’s hydraulic pump is not independe nt of the tr actor PTO, or if the tractor PTO has to be run to have hydraulic power , disconnect the mower driveline from the tractor PT O output shaf t.
OPERATION TX235 02/07 Operation Section 4- 36 © 2007 Alamo Group Inc. OPERA TION 14.1 T ransp orting on Public Roadways Extreme caution should be used wh en transporting the tractor and imp lement on public roadways.
OPERATION TX235 02/07 Operation Section 4- 37 © 2007 Alamo Group In c. OPERA TION Make sure that all tr actor flashing warning lights, headlight s, and brake/tail lights are functioning properly befor e proceeding onto public roads.
OPERATION TX235 02/07 Operation Section 4- 38 © 2007 Alamo Group Inc. OPERA TION 14.2 Hauling the T ractor and Implement Before transporting a loade d tractor and implement, measure the height and width dimensions an d gross weight of the complete loaded unit.
OPERATION TX235 02/07 Operation Section 4- 39 © 2007 Alamo Group In c. OPERA TION 15. TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE POSSIBLE REMEDY S treaking Slow Blade S peed Operate PT O at 540 RPM. Worn Blad e Ti ps Replace with Genuine RHINO blades.
OPERATION TX235 02/07 Operation Section 4- 40 © 2007 Alamo Group Inc. OPERA TION PROBLEM POSSIBLE CAUSE POSSIBLE REMEDY Heavy Vibra tion T oo high blade speed Do not exceed 540 PT O RPM. Broken/bent Blade Replace with gen uine RHINO blades. See your RHINO d ealer .
OPERATION TX235 02/07 Operation Section 4- 41 © 2007 Alamo Group In c. OPERA TION PROBLEM POSSIBLE CAUSE POSSIBLE REMEDY Belt Rollover Pulley misalignment Re-align Damaged belt Replace belt Foreign object in pulley grooves Ins pect all pulley gro oves for rust, paint or weld spots and remove.
.
Maintenanc e Section 5-1 © 2007 Alamo Group Inc. MAINTENANCE SECTION.
MAINTENANCE TX235 02/07 Maintenance Section 5-2 © 2007 Alamo Group Inc. MAINTENANCE Before operating your Mower , make sure it is properl y lu bricated and thoroughly inspected. Only a minimum of time and ef fort is required to re gularly lubricate and ma intain this machine to prov ide long life and trouble free operation.
MAINTENANCE TX235 02/07 Maintenance Section 5-3 © 2007 Alamo Group Inc. MAINTENANCE GEARBOX The Gearbox has been filled with lubricant to the T e st Plug Level prior to shipme nt. However , you should check the oil level at T est Plug before op erating, and fre quently thereafter .
MAINTENANCE TX235 02/07 Maintenance Section 5-4 © 2007 Alamo Group Inc. MAINTENANCE SWIVEL ASSEMBL Y The Swivel Assembly should be lubricated every 8 hours. Mnt-R-0278. CENTER 4-W A Y GEAR BOX Gearbox is filled from fa ctory with proper lube level. T o check oil level remote test plug on front side gear .
MAINTENANCE TX235 02/07 Maintenance Section 5-5 © 2007 Alamo Group Inc. MAINTENANCE GAUGE WHEEL ASSEMBLIES Gauge wheels are equippe d with bushings which require grease daily . Grease fittings are provide d in the Wheel Hub and Gau ge Wheel Pivot. Grease afte r 8 hours of use.
MAINTENANCE TX235 02/07 Maintenance Section 5-6 © 2007 Alamo Group Inc. MAINTENANCE DRIVELINE LUBRICA TION The Drivelines and U-Joint s should be inspected each morning before the mower is starte d. Mnt-0024. The U-Joint and CV Joint on the Driveline unde rgo extreme forces wh en the unit is turning or wh en the Wings are being raised.
MAINTENANCE TX235 02/07 Maintenance Section 5-7 © 2007 Alamo Group Inc. MAINTENANCE WING DRIVELINE PROFILE LUBRICA TION Grease telescoping profile tube inside the shielding da ily . Driveline must be removed from one connection, separated and grease d per Figure 8.
MAINTENANCE TX235 02/07 Maintenance Section 5-8 © 2007 Alamo Group Inc. MAINTENANCE BLADE SHARPENING Always sharpen both blade s at same time to maintain ba lance. Follow original shar pening pattern as sho wn in Figure Mnt-R-00 08 Always sharpen blades by grind ing.
MAINTENANCE TX235 02/07 Maintenance Section 5-9 © 2007 Alamo Group Inc. MAINTENANCE BEL T ADJUSTMENT PROCEDURE Shut off mowe r and tractor . Loose n jam nut (item 1) on tension adjustment bolt ( item 2).
MAINTENANCE TX235 02/07 Maintenance Sectio n 5-10 © 2007 Alamo Group Inc. MAINTENANCE BLADE SPINDLE SER VICE INSTRUCTIONS DISASSEMBL Y 1. R emove adjustin g nut #3. Install nut #8 on end shaft. 2. Support spindle housing #2 under flange and drive out shaft assembly #1.
MAINTENANCE TX235 02/07 Maintenance Sectio n 5-11 © 2007 Alamo Group Inc. MAINTENANCE STORAGE Y our rot ary mower re presents an investm ent from which you should ge t the greatest possibl e benefit.
RHINO LIMITED W ARRANTY 1. LIMITED W ARRANTIES 1.01. Rhino warrants for one year from the purchase date to the original non-commercial, governm e ntal, or municip al purchaser (“Purchaser”) and wa.
TO THE OWNER/OPERA T OR/DEALER In addition to the standard Lim ited W arranty shown on the facing page, Rhino also provides: A FIVE-YEAR (60 months ) LIMITED WARRANTY* on GEARBOX component s provided they ha ve been properly maint ained† and have not been subjected to abuse or mis-use except as limited below .
TX235-SOM-02/0 7 P/N 00767122C Printed U.S.A TX235 TURF FLEX Rot ary Mower.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Alamo TX235 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Alamo TX235 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Alamo TX235, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Alamo TX235 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Alamo TX235, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Alamo TX235.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Alamo TX235. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Alamo TX235 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
