Manuel d'utilisation / d'entretien du produit 59840 du fabricant Electrolux
Aller à la page of 48
LAVATHERM 59840 User manual Condenser Dryer with Heat Pump.
Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will exper ience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence.
Contents Operating Instructions 5 Important safety information 5 Product description 8 Control p anel 9 What is shown in the display 9 Before first use 10 Sorting and preparing laundry 11 Programme ch.
Changing the bulb for in terior lighting 29 Machine settings 31 Technical data 32 Consumption values 33 Hints for test ins titute s 33 Installation 34 Transporting the appliance 34 Appliance positioni.
Operating Instructions Important safety information In the interest of your saf ety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, includi ng its hints and warnings.
• Items that have been soiled with substa nces such as co oking oil acetone, petrol, kerosene, spot removers, turpentine, w axes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer.
• After having installed the a ppliance, check that it is no t pressing or st anding on its electrical supply cable. • If the tumble dryer is placed on top of a washing machine, it is compulsory to use the stacking kit (option al accessory). Use • This appliance is designed for domestic use.
Product description 11 2 3 7 9 5 1 4 8 10 6 12 1 Control panel 2 Drawer with cond ensed water conta iner 3 Lamp for inside l ight 4 Fine strainer (lint fil ter) 5 Large mesh filter (lint filter) 6 Mic.
Control panel 1 2 3 4 5 6 1 Programme knob and OFF switch 2 Function buttons 3 START PAUSE button 4 DELAY START button 5 Status led 6 Display What is shown in the display 1 3 5 6 4 2 Control panel 9.
1 time to end / error message 2 cycle phase status 3 options 4 warnings 5 spin speed selection 6 dryness selection Before first use WARNING! If the appliance was not transported in an upright position.
Sorting and preparing laundry Sorting laundry • Sort by fabric type: – Cotton/linen for programmes in COTTONS programme group. – Mixtures and synthetics for progra mmes in EASY CARE programme group.
Programme chart Pro- grammes max. load (weight when dry) Additional functions/ options Application/properties Care mark DRYNESS SPIN SPEED LONG ANT I - CREASE BUZZER TIME DELAY START COTTONS EXTRA DRY 7 kg • • • • - • Thorough drying of thick or m ulti- layered fabrics, e.
Pro- grammes max. load (weight when dry) Additional functions/ options Application/properties Care mark DRYNESS SPIN SPEED LONG ANT I - CREASE BUZZER TIME DELAY START MIXED 3 kg • • • • - • For drying cotton and synthetic fabric s, uses low temperature.
Pro- grammes max. load (weight when dry) Additional functions/ options Application/properties Care mark DRYNESS SPIN SPEED LONG ANT I - CREASE BUZZER TIME DELAY START WOOL 1 kg • • - • - • For.
Daily use Switching machine on / switching light on Turn the programme selector to any progra mme or turn it to LIGHT ON. The machine has been switched on. When the loading do or is opened, the drum is ill uminated. Opening loading door / loading laundry 1.
Setting dryness level If laundry comes out of the machine too damp after a standard drying programme, you can increase the drying result by using the DRYNESS function. Laundry becomes drier as you move from MIN to MAX . Press the DRYNESS button repeatedly until the desired dryness level ( MIN , MED or MAX ) is shown in the display.
Setting long anti - crease function Press the LONG ANTI-CREASE button. A 90 minute anti-crease phase is set. The display now shows the LONG ANTI -CREASE icon . If this additional fu nction is selected, the anti-crease phase at the end of the drying cycle is lengthened by 60 minutes.
If the programme duration is not selected, the duration is automatically set to 10 mins. Setting delay timer With the DELAY button, you can delay the start of a programme by between 30 mi- nutes (30') and a maximum of 20 hours (20h). 1. Select the programme and additional functions.
Starting the programme Press the START PAUSE button. The pro - gramme is started. The programme progress is shown in LCD by appropriate set of icons. From left to the right, from IRON DRY to ANTI-CREASE i c o n depends on the drying cycle chosen. E. g.
Drying cycle complete / removing laundry Once the drying cycle is compl ete, display shows a bli nking " 0 ", under anti- crease icon appear dash. If the BUZZER button has been pressed, an a coustic signal sounds intermittently for about one minute.
Care and cleaning Cleaning fluff filter The filters collect all the fluff which accumulate s during drying. To ensure th at the dryer works perfectly, the fluff filters (micro-fine filter and fine strainer) must be cleaned after every drying cycle. The warning icon is on to remind you this operation.
4. Push down unloc k button on large mesh filter. Large mesh filter jumps up. 5. Take out f ine straine r. 6. Remove fluff from fine strainer. It is best to use a damp hand for this purpose.
11. Press against the large mesh filter until it locks into the interlock. If the fine strainer is not fitted, the large mesh filter will not snap into place and the loading door cannot be closed. Cleaning the door seal Wipe the door seal with a damp cloth immediately after the drying cycle has finished.
2. Pour condensed water out into a ba - sin or similar receptacle. 3. Slide outlet connections in and refit condensa te tank. If the programme has been in terrup - ted as a result of the condensate tank being full: Press the START PAUSE button to continue the drying c ycle.
1. Open loading door 2. Open door in plinth: To do this, press the release button on the bot - tom of the door aperture and open the door in the plinth to the left. 3. Pull filter housing out of the base by the handle. 4. Clean the inside of the door, the fluff filter chamber and the rubber seals of fluff.
7. Remove fluff from the fluff filter with a damp hand. 8. Insert the fluff filter into the filter housing. 9. As necessary, approx. once every 6 months, remove the fluff from the heat exchanger using th e sponge supplied. When doing this, please use rubber gloves.
Clean operating screen and housing CAUTION! Do not use furniture cleaners or aggressi ve cleaning agents to clean the machine. Use a damp cloth to wipe down th e operating screen and housing.
What to do if ... Troubleshooting by yourself If, during operation, the er ror code E... plus number or letter) appears on the LCD: Switch the machine off and on again. Reset programme. Press the START PAUSE button If the er ror is still di splayed, please inform your l ocal Service Force Cen tre and quote the error code.
Defective light bulb. Replace light bulb (see next section). Displayed programme time changes erratically or stays un - changed fo r a long tim e. Programme time is corrected automatically depending on type and volume of l aundry and level of dampness.
2. Replace defective bulb. 3. Screw cover back down. Check the corre ct positioni ng of o-ring ga sket before screw ing back the door li ght cover. Do not operate the dryer when miss ing o-ring gasket on door light cover. WARNING! For safety reasons, the cover must be screwed down tightly.
Machine settings Setting Impleme ntation BUZZER permanent off 1. Turn the programme selec tor to any programme. 2. Press si multaneou sly th e DRYNES S and SPIN SPEED buttons and hold dow n for approx. 5 seconds. 3. The buzzer is by default always off.
Technical data This applian ce conforms with the foll owing EU Directives: – 73/23/EEC dated 19.02.1973 L ow Voltage Directive – 89/336/EEC dated 03.
Consumption values The consumption values have been esta blished under standard conditions. They may deviate when the machine is op erated in domestic circumstances. Programme Loading volume in kg Energy consumption in kWh COTTONS STORAGE DRY 1) 7 2.4 COTTONS IRON DRY 1) 7 1.
Installation Transporting the appliance Only tip the appliance on its left side to trans - port (see illustration), if it cannot be trans - ported in an upright position. Appliance positioning • It is recommended that, for your convenience, the machine is positioned close to your washing machine.
The hot air emitted by the tu mble dryer can reach temperatures of up to 60°C. The appliance must therefore not be installed on floors which are not resistant to high temperatures. When operating the tumble dryer, the room temperature must not be lower than +5°C and higher than +35°C, as it may affect the performance of the appliance.
Electrical connection Details on mains voltage, type of current and the fuses required should be taken from the type plate. The type plate is fi tted near the loading apertur e (see “Product description” chapter). Connect the machine to an earthed sock et, in accordance with c urrent wiring regulation s.
Permanent connection In the case of permanent connection it is necessary that you install a double pole switch between the appliance and the elec tricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compli ance with the cur rent electrical regulations.
7. Unscrew cover plates E from the front of the ma chine, rotate through 180°, screw on the oppo - site side. 8. Unscrew door lock F , push down slightly and remove from the front of the machine.
Installation kit for external condensate drain Attached to your product Installation kit 125 122 510 for direct draining of cond ensate into a basin, siphon, gully, etc. The condensate tank then no lo nger has to be drained, it must however remain in its intended position in the machine.
Environment The symbol on the product or on its packag ing indicates that this product may not be treated as household waste. Instea d it should be taken to the appropriate collection point for the recycling of el ectrical and electr onic equipment.
Environmental tips • In the dryer, laundry becomes fluffy and soft. Fabric softener s are not therefore needed when washing. • Your dr yer will fun ction most economically i f you: – always keep.
Guarantee/Service Guarantee/Customer Service GREAT BRITAIN & IRELAND Standard guarantee conditions We, Electrolux, under take that if within 12 months of the date of the purchase this Electrolux a.
Your telephone call wil l be automatically routed to th e Service Force Centre cov - ering your po stcode area. For the address of your local Service Fo rce Centre an d further in formation about Service Force, please visit the website at www.serviceforce.
European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law.
Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (Chapter “Wh at to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service part ners.
Deutschland +49 180 32 26 622 Muggenhofer Str. 135, 90429 Nürnberg Eesti +37 2 66 50 030 Pärnu mnt. 153, 11 624 Tallinn España +34 902 11 63 88 Carretera M-300, Km. 29,900 Alcalá de Henares Madrid France www.electrolux.fr Great Britain +44 8705 929 929 Addington Way, Luton, Bed - fordshire LU4 9QQ Hellas +30 23 10 56 19 70 4, Limnou Str.
Schweiz - Suisse - Svizzera +41 62 88 9 9 111 Industriestrasse 10, CH-5506 Mägenwil Slovenija +38 61 24 25 731 Gerbičeva ul ica 98, 1000 Ljubljana Slovensko +421 2 43 33 43 22 Electrolux Slovakia s.r.o., Electrolux Domáce spotre‐ biče SK, Seberíniho 1, 821 03 Bratislava Suomi www.
www.electrolux.com www.aeg-electrolux.co.uk 125989520-01-140 12008.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Electrolux 59840 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Electrolux 59840 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Electrolux 59840, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Electrolux 59840 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Electrolux 59840, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Electrolux 59840.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Electrolux 59840. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Electrolux 59840 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
