Manuel d'utilisation / d'entretien du produit LC-SD12 du fabricant Eiki
Aller à la page of 52
MODEL LC-SD12 MUL TIMEDIA PR OJECT OR O WNER’S MANU AL.
2 Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
3 T able of Contents TRADEMARKS • Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc. • IBM, VGA, XGA, and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. • Windows and PowerPoint are registered trademarks of Microsoft Corporation.
4 CAUTION : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
5 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
6 Safety Instruction CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR –D o not drop or bump a projector, otherwise damages or malfunctions may result. – When carrying a projector, use a suitable carrying case. – Do not transport a projector by using a courier or transport service in an unsuitable transport case.
7 Compliance The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Po wer Cord f or the United Stat es and Canada : AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).
8 q Zoom Lever ( ☞ P20 ) w Infrared Remote Receiver ( ☞ P11 ) e Focus Ring ( ☞ P20 ) r Projection Lens ( ☞ P41 ) t Lens Cover ( ☞ P40 ) y Air Intake Vent ( ☞ P40 ) u Exhaust Vent o Air Int.
9 S-VIDEO COMPUTER IN / COMPONENT IN / COMPUTER / COMPONENT AV AUDIO IN VIDEO USB SERVICE PORT RESET ✽ RESET button A microprocessor included in the projector may occasionally malfunction and need to be reset. If necessary, press this button with a sharp tool to restart the unit.
10 Parts Names and Functions T op Contr ols and Indicators POWER LAMP REPLACE WARNING INPUT MENU ON - OFF SELECT V O L U M E – V O L U M E + e w q u y t r i i POWER indicator Flash red until the projector gets ready to be turned on. It turns red when the projector is in the stand-by mode.
11 P - TIMER FREEZE C OMPUTER OMPUTER VIDEO P AGE SELECT D.ZOOM MUTE VOLUME - MENU N O SHOW IMAGE VOLUME + KE Y S TONE AUT O P C ON - OFF Parts Name and Functions To insure safe operation, please observe the following precautions : – Do not bend, drop the remote control, or expose the Remote Control to moisture or heat.
12 Parts Names and Functions To insure safe operation, please observe the following precautions : – Use (2) AAA, SUM-4 or LR03 type alkaline batteries. – Replace two batteries at the same time. – Do not use a new battery with a used battery. – Avoid contact with water or liquid.
13 – This projector is designed to project on a flat projection surface. – The projector can be focused from 4.3’(1.3m) to 21.3’(6.5m). – Refer to the figure below to adjust the screen size. 40” 100” 150” 200” 169” 127” 83” 34” A B 21.
14 This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system.
15 S-VIDEO COMPUTER IN / COMPONENT IN / COMPUTER / COMPONENT AV AUDIO IN VIDEO USB SERVICE PORT RESET Connecting t o a Computer IBM-compatible computer or Macintosh computer (VGA / SVGA / XGA / SXGA) When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet.
16 Installation Connecting t o Video Equipment S-VIDEO COMPUTER IN / COMPONENT IN / COMPUTER / COMPONENT AV AUDIO IN VIDEO USB SERVICE PORT RESET Video Source (example) Video Cassette Recorder Video D.
17 Connect the projector's AC Power Cord into an AC outlet. The POWER indicator flashes in a moment and then turns red. Press the POWER ON-OFF button on the top control or on the remote control. The POWER indicator turns green, and the cooling fans start to operate.
18 The projector can be adjusted or set via the On-Screen Menu. Refer to the following pages regarding each adjustment and setting procedure. Press the Point 7 8 buttons to select a Menu icon to adjust. Press the Point ed buttons to select an item to adjust.
19 Basic Operation Menu Bar For Computer Source PC System Menu Used to select the computer system. ( ☞ P23 ) Image Adjust Menu Used to adjust computer image. [Contrast / Brightness / Color temp. / White balance (R/G/B) / Gamma / Auto grayscale] ( ☞ P28 ) Setting Menu Used to change settings of the projector or reset the Lamp replace counter.
20 Press the FREEZE button on the remote control to freeze the picture on-screen. To cancel the Freeze function, press the FREEZE button again or press any other button.
21 Basic Operation Message disappears after 4 seconds. Press the P-TIMER button on the remote control. The timer display “00 : 00” appears on the screen and the timer starts to count time (00 : 00 ~ 59 : 59). To stop P-Timer display, press the P-TIMER button.
22 Menu Operation Direct Operation Choose Computer by pressing the INPUT button on the top control or the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below.
23 Computer Input Comput er Syst em Selection This projector automatically tunes to various types of computers based on VGA, SVGA, XGA or SXGA with its Multi-scan system and Auto PC Adjustment.
24 Computer Input Au to PC Adjustment Auto PC Adjustment function is provided to automatically conform Fine sync, Total dots and Picture Position to your computer. This function can be operated as follows. Press the MENU button to display the On-Screen Menu.
25 Computer Input Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. In this case, the projector cannot reproduce a proper image and the image may be recognized as a flickering picture, a non- synchronized picture, a non-centered picture or a skewed picture.
26 Computer Input Note: Display area, Display area (H/V) and Full screen cannot be adjusted when 480p, 575p, 480i, 575i, 720i(HDTV) , 1035i(HDTV) or 1080i(HDTV) is selected on PC SYSTEM Menu. ( ☞ P23 ). Select area displayed with this projector. Select the resolution at the Display area dialog box.
27 Computer Input Menu Operation Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon. 1 2 Press the Point d button to move the red frame pointer to the level that you want to set and then press the SELECT button.
28 Computer Input Image Level Menu Move the red frame pointer to any of Image 1 to 4 where you want to set and then press the SELECT button. Reset all adjustments to previous figures.
29 Computer Input Scr een Size A djustment This projector has a picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon.
30 Input Sour ce Selection ( Video , S-Video ) Menu Operation Direct Operation Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below.
31 V ideo input Input Sour ce Selection ( Component, RGB Scar t 21 -pin ) Menu Operation Direct Operation Choose Computer by pressing the INPUT button on the top control or the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below.
32 Vi deo Input AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) V ideo Syst em Selection Press the MENU button to display the On-Screen Menu.
33 Vi deo Input Menu Operation Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon. 1 2 Press the Point d d button to move the red frame pointer to the level that you want to set and then press the SELECT button.
34 Vi deo Input Press the Point 7 8 buttons to adjust the value. Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 1 2 Press the Point d button to move the red frame pointer to the item you want to adjust and then press the SELECT button.
35 Vi deo Input To store the adjusted data, move the red frame pointer to the Store icon and press the SELECT button to display the Image Level Menu. Move the red frame pointer to the Image Level 1 to 4 and then press the SELECT button. A confirmation box will appear and select [Yes].
36 Keystone This function corrects distortion of a projected image. Select either Store or Reset with the Point 7 8 buttons, and then press the Select button. The keystone dialog box appears. Adjust keystone with the Point e e d d 7 8 buttons. Store .
37 Setting For reducing power consumption as well as maintaining the lamp life, Power management function turns off the projection lamp when the input signal is interrupted and no button is pressed for 30 seconds or more.
38 Setting Remote control This projector has two different remote control codes; the factory- set normal code (Code 1) and the secondary code (Code 2). This switching function prevents remote control interference when operating several projectors or video equipment at the same time.
39 Wa r n i ng Indicator The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance.
40 Maintenance and Cleaning Turn off the projector, and disconnect AC power cord from the AC outlet. Turn the projector upside down and remove air filters by pulling the latches upward. 1 2 Removable air filters prevent dust from accumulating on the surface of optical elements inside the projector.
41 Maintenance and Cleaning Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. When the projector is not in use, replace the Lens Cover.
42 When the life of the projection lamp draws to an end, LAMP REPLACE indicator lights yellow. If this indicator lights yellow, replace the projection lamp with a new one promptly. ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer.
43 Maintenance and Cleaning Lamp Replace Count er Be sure to reset the lamp replace counter after Lamp Assembly is replaced. When the lamp replace counter is reset, the LAMP REPLACE Indicator stops lighting. Note : – Do not reset the Lamp Replace Counter until after the projection lamp is replaced.
44 Tr oubleshooting Before calling your dealer or service center for assistance, check the matters below once again. – Make sure you have properly connected the projector to peripheral equipment as described in the section "Installation" on P15-16.
45 This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. Appendix W ARNING : High voltag es are used t o operat e this project or .
46 Appendix Check the indicators for projector condition. • • • lights green. • • • lights red. • • • off • • • flashes green. ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly.
47 Appendix Menu T ree MODE 1 MODE 2 SVGA 1 - - - - Auto PC Adj. Fine sync Total dots Horizontal Vertical Current mode Clamp Display area Display area H Display area V Full screen Reset Store Quit Standard Real Image 1 Image 2 Image 3 Image 4 Image Adjust Contrast Brightness Color temp.
48 Appendix Auto PAL SECAM NTSC NTSC4.43 PAL-M PAL-N Main menu V ideo Input Auto 1080i 1035i 720p 575p 480p 575i 480i Standard Cinema Image 1 Image 2 Image 3 Image 4 Quit Normal Wide 0 - 63 0 - 63 0 -.
49 Appendix Compatible Comput er Specifications Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 100 MHz of Dot Clock. Note: – Specifications are subject to change without notice.
50 Appendix Te c hnical Specifications 0.5" TFT Active Matrix type, 3 panels Multi-media Projector 4.6lbs (2.1 kg) 10.63" x 3.07" x 7.48" (270mm x 78.0mm x 190mm) (not including Adjustable Feet) 800 x 600 dots 1,440,000 (800 x 600 x 3 panels) PAL, SECAM, NTSC, NTSC4.
51 Appendix COMPUTER INPUT TERMINAL (ANALOG) Terminal : Analog RGB (Mini D-sub 15-PIN) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Pin Configuration Terminal : Mini DIN 8-PIN 1 2 3 4 5 8 7 6 Pin Configuration.
Part No. 610 321 9899 (1AA6P1P4799-A MP3BD-A) Printed in China © 2004 Eiki International, Inc. A-key to better communications U .S.A. EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-24-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : usa@eiki.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Eiki LC-SD12 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Eiki LC-SD12 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Eiki LC-SD12, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Eiki LC-SD12 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Eiki LC-SD12, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Eiki LC-SD12.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Eiki LC-SD12. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Eiki LC-SD12 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
