Manuel d'utilisation / d'entretien du produit NSX-D60 du fabricant Aiwa
Aller à la page of 22
CD Stereo System 8C-NF7-903-11 011211BKH-U-FM U NSX-D60 For assistance and information (United States and Puerto Rico) En (English) E (Español) F (Français) OPERA TING INSTRUCTIONS MODE D'EMPLOI MANUAL DE INSTRUCCIONES OWNER'S RECORD Record the model number and serial number of your set (found at the rear of your set) below .
2 En W ARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. “CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 En T ABLE OF CONTENTS IMPORT ANT SAFETY INSTRUCTIONS ......... 2 PREPARA TIONS ................................... 4 PAR TS AND CONTROLS ......................... 5 ADJUSTMENTS BEFORE OPERA TIONS ........ 8 CD OPERA TIONS ...........................
4 En Connection Plug in the AC power cord to the AC power outlet after all other connections are made. 1 Connect the front speakers. Connect the right front speaker to the SPEAKERS R terminals and place it on the right side of the unit. Connect the left to the SPEAKERS L terminals and place it on the left side.
5 En Main unit: rear 1 AM LOOP , FM 75 Ω terminals Plug in the supplied AM and FM antennas here. 2 VIDEO/AUX jacks Accepts analog sound signals from external equipment. Connect using an optional connecting cable with RCA phono plugs (red plug to R jack, white plug to L jack).
6 En 1 T APE/DECK 1/2 Selects T ape function, and deck 1 or 2. TUNER/BAND Selects Radio function and the radio band. VIDEO/AUX Selects the function of external equipment connected to VIDEO/AUX jacks. CD Selects CD function. 2 POWER 6 ST ANDBY/ON Switches the unit on and off (standby).
7 En Remote control Buttons with the same or similar names with the main unit basically have the same function. 1 POWER T -BASS TREBLE ENTER 2 0-9, +10 CD: selects a CD track of the specified number . Radio: tunes in to the station with the specified preset number .
8 En ADJUSTMENTS BEFORE OPERA TIONS Power Tu rning the unit on Press POWER 6 ST ANDBY/ON (POWER on the r emote control). Pressing T APE, TUNER, VIDEO/AUX or CD also turns the unit on (Direct Play Function.) When a disc or tape is inserted, the playback will start automatically .
9 En Dimmer Adjusts the brightness of the display . 1 Press DEMO/ECO twice when the unit is turned on, and then within 4 seconds press ENTER. 2 Tu rn MUL TI JOG to select one of the three dimmer modes or " DIM-OFF ", and then press ENTER. " DIM-OFF " is the brightest and " DIMMER 3 " is the dimmest.
10 En This unit plays back finalized CD-R/RW discs as well as audio CDs. Playback 1 Press CD and load disc(s). Press z CD OPEN/CLOSE to open the disc compartment and place one or two disc(s) with the labelled side up. To place thr ee discs, press DISC CHANGE so that the trays rotate, then place the third one.
11 En Programed playback Plays back up to 30 selected tracks in programed order . 1 Press SHIFT+PROGRAM on the remote control during stop. " PRGM " flashes on the display . 2 Press CD DIRECT on the remote control and then press the numbered button (1-3) within 3 seconds to select a disc.
12 En RADIO OPERA TIONS Manual tuning 1 Press TUNER/BAND (BAND on the remote control) repeatedly to select a band (FM or AM.) 2 Press f or g to tune in to a station. " TUNE " is displayed when a station is tuned in. " 1 " lights up for FM stereo reception.
13 En Adjustments Antennas Keep antennas away from metallic objects, electrical equipment and cords. FM antenna: Extend fully and position for the best reception. If receiving condition is poor , connect optional outdoor antenna to FM 75 Ω terminal.
14 En T APE OPERA TIONS Playback Use only type I (normal) tapes. 1 Press T APE/DECK 1/2 and insert the tape in either deck. Press z PUSH EJECT to open the cassette holder , and insert with the exposed side down and playback side facing out from the unit.
15 En 3 Press w REC/REC MUTE to start recording. When recording a CD or tape, playback starts automatically . When recording input from connected equipment, manually start playback of the source. On the remote control, press REC MODE and then press w REC/REC MUTE within 3 seconds.
16 En Programed Edit Recording As you program the CD tracks to record, Programed Edit Recording displays the remaining recording time for each side of the tape, so you can easily select a set of desired tracks within the length of your tape. 1 Insert the recording tape in DECK 2.
17 En SOUND ADJUSTMENTS Sup er T -BASS Emphasizes low frequencies for a powerful sound. Press T -BASS repeatedly to select one of the three emphasis levels (1-3) or the off position (0). • When the sound becomes distorted with the T -BASS effect, cancel it.
18 En TIMER OPERA TIONS Sleep timer Tu r ns off the unit automatically after a specified time. 1 Press SHIFT+SLEEP on the remote control. " SLP " appears on the display . 2 Press f or g repeatedly to set the sleep timer duration. With each press, the timer duration changes in 5-minute steps between 5 to 240 minutes.
19 En To display the timer setting Press TIMER. The timer -on time, the source and the timer-activated duration are displayed for 6 seconds. Tip : T imer setting can be displayed even while the unit i.
20 En Care and maintenance Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit. To clean the cabinet Use a soft and dry cloth. If the unit surfaces are extremely dirty , use a soft cloth lightly moistened with mild detergent solution.
21 En Specifications MAIN UNIT CX-ND60 TUNER FM tuning range 87.5 MHz to 108 MHz FM usable sensitivity (IHF) 13.2 dBf FM antenna terminal 75 ohms (unbalanced) AM tuning range 530 kHz to 1710 kHz (10 k.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Aiwa NSX-D60 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Aiwa NSX-D60 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Aiwa NSX-D60, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Aiwa NSX-D60 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Aiwa NSX-D60, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Aiwa NSX-D60.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Aiwa NSX-D60. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Aiwa NSX-D60 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
