Manuel d'utilisation / d'entretien du produit DX701i du fabricant 3M
Aller à la page of 50
Digital Projector DX70i Operator ’ s Guide Important Note Before using this product, please read the “Product Safety Guide” and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference.
2 © 3M 2008. All Rights Reserved. Contact 3M In the event of missing and/or damaged equipment, or technical questions, the following information can help in the completion of the installation. Customer Service – 1-800-328-1371 (US) The 3M logo, and 3M are trademarks of the 3M Company .
© 3M 2008. All Rights Reserved. 1 3M™ Digital Projector DX70i T able of Contents T able of Contents ......................................................................................... 1 Usage Notice ...........................................
2 © 3M 2008. All Rights Reserved. Usage Notice 3M™ Digital Projector Precautions Follow all warnings, precautions and maintenance as recommended in this user ’s guide to maximize the life of your unit. W arning- Do not look into the projector ’ s lens when the lamp is on.
© 3M 2008. All Rights Reserved. 3 3M™ Digital Projector DX70i U sage Notice Use under the following conditions: - In extremely hot, cold or humid environments. - In areas susceptible to excessive dust and dirt. 1HDUDQDSSOLDQFHWKDWJHQHUDWHVDVWURQJPDJQHWLF¿HOG - In direct sunlight.
4 © 3M 2008. All Rights Reserved. Introduction 3M™ Digital Projector Product Features This product is a XGA single chip 0.7” Darkchip3 DLP ® projector . Outstanding features include: T rue XGA, 1024 x 768 addressable pixels T exas Instruments Single chip DLP ® T echnology NTSC/NTSC4.
© 3M 2008. All Rights Reserved. 5 3M™ Digital Projector DX70i I ntroduction Power Cord VGA Cable 1.8m Wireless Remote Controller Composite Video Cable 1.8m Projector with lens cap Package Overview This projector comes with all the items shown below .
6 © 3M 2008. All Rights Reserved. Introduction 3M™ Digital Projector 1. Control Panel 2. Zoom Lever 3. Focus Ring 4. Elevator Button (one on each side) 5.
© 3M 2008. All Rights Reserved. 7 3M™ Digital Projector DX70i I ntroduction Control Panel 1. IR Receiver 2. Power/Standby LED 3. T emp Indicator LED 4. Lamp Indicator LED 5. Keystone +/- 6. Re-Sync 7. Power/Standby 8. Four Directional Select Keys 9.
8 © 3M 2008. All Rights Reserved. Introduction 3M™ Digital Projector Connection Ports 1. DVI-D Input Connector (PC Digital/HDTV/HDCP Input) 2. VGA1-In Connector (PC Analog signal/HD/Component Video Input) 3. Audio Input Connector (for DVI-D or VGA1-In) 4.
© 3M 2008. All Rights Reserved. 9 3M™ Digital Projector DX70i I ntroduction Remote Control with Mouse Function and Laser Pointer 1. Power 2. Re-Sync 3. Keystone Correction 4. Display Format 5. Mouse 6. Mouse Right Click 7. Page Up 8. Page Down 9. Four Directional Select Keys 10.
10 © 3M 2008. All Rights Reserved. Installation 3M™ Digital Projector Connecting the Projector 1.................................................................................................... Power Cord 2.......................................
© 3M 2008. All Rights Reserved. 1 1 3M™ Digital Projector DX70i I nstallation Connect the V ideo 1.................................................................................................... Power Cord 2.....................................
12 © 3M 2008. All Rights Reserved. Installation 3M™ Digital Projector Powering On the Projector 1. Remove the lens cap. n 2. Ensure that the power cord and signal cable are securely connected. The Power LED will turn red. 3. T urn on the lamp by pressing “Power/Standby” button on the control panel.
© 3M 2008. All Rights Reserved. 13 3M™ Digital Projector DX70i I nstallation LED Indicator When the “TEMP” indicator turns red, it indicates the projector has overheated. The projector will automatically shut itself down. When the “LAMP” indicator turns red, it indicates a problem with the lamp.
14 © 3M 2008. All Rights Reserved. Installation 3M™ Digital Projector Adjusting the Projected Image Adjusting the Projector Image Height The projector is equipped with elevator feet for adjusting the image height. T o raise the image: 1. Press the elevator buttons n .
© 3M 2008. All Rights Reserved. 15 3M™ Digital Projector DX70i I nstallation 61.5" (156.3cm) 102.5" (260.4cm) 143.5" (364.6cm) 184.5" (468.8cm) 250.2" (635.4cm) 24.6" (62.5cm) 73.8" (187.5cm) 123.0" (312.5cm) 172.
16 © 3M 2008. All Rights Reserved. User Controls 3M™ Digital Projector Control Panel & Remote Control There are two ways for you to control the functions: Remote Control and Control Panel. Using the Control Panel Power/ Standby Refer to the “Power On/Off the Projector” section on pages 12-13.
© 3M 2008. All Rights Reserved. 17 3M™ Digital Projector DX70i U ser Controls Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 12-13. Re-Sync Automatically synchronizes the projector to the input source.
18 © 3M 2008. All Rights Reserved. User Controls 3M™ Digital Projector Clear Clear your selection. Enter &RQ¿UPRXULWHPVHOHFWLRQ Source Lock Select auto detection all connector ports or lock current connector port. (see page 28 for more) Video Choose composite video source.
© 3M 2008. All Rights Reserved. 19 3M™ Digital Projector DX70i U ser Controls The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source.
Degamma Vertical Keystone Menu Location Green Aspect Ratio On/Off Zoom Security Settings Enable/Disable Security Timer Change Password Month/Day/Hour On/Off PIP Image-I Display Mode PC/Photo/Video/sRGB/User Brightness Saturation Low/Mid.
© 3M 2008. All Rights Reserved. 21 3M™ Digital Projector DX70i U ser Controls Display Mode There are many factory presets optimized for various types of images. PC: For computer or notebook. (brightest image) Photo: For optimum colour at high brightness.
22 © 3M 2008. All Rights Reserved. User Controls 3M™ Digital Projector Colour T emperature Adjusts the colour temperature. At higher temperature, the screen looks colder; at lower temperature, the screen looks warmer . Each display mode has its own colour temperature and can memorize user ’ s selection.
© 3M 2008. All Rights Reserved. 23 3M™ Digital Projector DX70i U ser Controls Frequency “Frequency” changes the display data frequency to match the frequency of your computer ’ s graphic card.
24 © 3M 2008. All Rights Reserved. User Controls 3M™ Digital Projector Input Signal Display area Picture area Display on Screen V er . Shift (16:9) Adjust the image position up or down, when you select the aspect ratio of 16:9. Press the to move the image down.
© 3M 2008. All Rights Reserved. 25 3M™ Digital Projector DX70i U ser Controls Colour Full Range: Adjust the Red, Green and Blue color for all screen. Enhance Individual: Adjust the Red, Green, Blue, Y ellow , Cyan and Magenta colors for advanced adjustment of the individual colors.
26 © 3M 2008. All Rights Reserved. User Controls 3M™ Digital Projector Different color setting will be memorized at 4 dif ferent source groups. But they will be same under same source.
© 3M 2008. All Rights Reserved. 27 3M™ Digital Projector DX70i U ser Controls Language Language Choose the multilingual OSD menu. Use the or key to select your preferred language.
28 © 3M 2008. All Rights Reserved. User Controls 3M™ Digital Projector Menu Location Choose the menu location on the display screen. Projection Front-Desktop The factory default setting. Front-Ceiling When you select this function, the projector turns the image upside down for ceiling-mounted projection.
© 3M 2008. All Rights Reserved. 29 3M™ Digital Projector DX70i U ser Controls Zoom Press the to reduce the size of an image. Press the to magnify an image on the projection screen. V olume Press to decrease the volume. Press to increase the volume.
30 © 3M 2008. All Rights Reserved. User Controls 3M™ Digital Projector Management PIP Choose “On” to select on the PIP screen, choose “Of f” to select of f the PIP screen. PIP Position Choose the PIP screen position on the display screen. PIP Source Switch Press “Enter” to switch PIP screen source.
© 3M 2008. All Rights Reserved. 31 3M™ Digital Projector DX70i U ser Controls 3M: The default startup screen of 3M projector . User: Use memorize picture from “Logo Capture” function. Logo Capture Press “Enter” to immediately capture a picture what on the display screen.
32 © 3M 2008. All Rights Reserved. User Controls 3M™ Digital Projector LAN Press “Enter” to apply LAN settings. If the connection is successful, the OSD display will show the following dialogue box. Network State: T o display network information.
© 3M 2008. All Rights Reserved. 33 3M™ Digital Projector DX70i U ser Controls 1. Fill in a new IP , a subnet mask, a gateway and a DNS in the dia- logue box. 2. Then choose apply and press “Enter” button to ef fectuate the con- ¿ JXUDWLRQSURFHVV 3.
34 © 3M 2008. All Rights Reserved. User Controls 3M™ Digital Projector For example: Use Microsoft Internet Explorer (IE) web browser to control the projector , the IP address is http: // 10.0.50.100. Step 1: Find an IP Address (10.0.50.100) from LAN function of projector .
© 3M 2008. All Rights Reserved. 35 3M™ Digital Projector DX70i U ser Controls Step 7: The Local Area Network (LAN) Setting dialog box appears , In the Proxy Server area , cancel the Use a proxy server for your LAN check box ., then click “OK” button twice.
36 © 3M 2008. All Rights Reserved. User Controls 3M™ Digital Projector Lamp & Power STD Mode Choose “On” to dim the projector lamp which will lower power con- sumption and extend the lamp life by up to 130%. Choose “Off” to return to BRIGHT mode.
© 3M 2008. All Rights Reserved. 37 3M™ Digital Projector DX70i A ppendices Problem: No image appears on screen Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure the pins of connectors are not crooked or broken.
38 © 3M 2008. All Rights Reserved. Appendices 3M™ Digital Projector 5. Select the “Change” button under the “Monitor” tab. 6. Click on “Show all devices.” Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box.
© 3M 2008. All Rights Reserved. 39 3M™ Digital Projector DX70i A ppendices Message Power-LED Temp-LED Lamp-LED (Green) (Red) Standby State (Input power cord) W arming Flashing Normal Mode Cooling Flashing Error (Lamp failed) Error (Fan failed) Flashing Error (Over T emp.
40 © 3M 2008. All Rights Reserved. Appendices 3M™ Digital Projector Problem: Message Reminders Fan fail: Over temperature: Power Off: Replace the lamp:.
© 3M 2008. All Rights Reserved. 41 3M™ Digital Projector DX70i A ppendices Replacing the Lamp The projector keeps track of the lamp usage. It will show you a warning message: When you see this message, change the lamp as soon as possible. Make sure the projector has cooled down for at least 30 minutes before changing the lamp.
42 © 3M 2008. All Rights Reserved. Appendices 3M™ Digital Projector Compatibility Modes Mode Resolution (ANALOG) (DIGIT AL) V .Frequency (Hz) H.Frequency (kHz) V .Frequency (Hz) H.Frequency (kHz) VESA VGA 640 x 350 70 31.5 70 31.5 VESA VGA 640 x 350 85 37.
© 3M 2008. All Rights Reserved. 43 3M™ Digital Projector DX70i A ppendices Ceiling Mount Installation 1. T o prevent damaging your projector , please use the ceiling mount package for installation.
44 © 3M 2008. All Rights Reserved. Appendices 3M™ Digital Projector RS232 Protocol Function List ----------------------------- ----------------------------- ------------------------------ ---------.
© 3M 2008. All Rights Reserved. 45 3M™ Digital Projector DX70i A ppendices READ from projector ----------------------------- ----------------------------- ----------------------------- ------------.
46 © 3M 2008. All Rights Reserved. Appendices 3M™ Digital Projector VGA-In Connector Pin no. Name I/O (From Projector Side 1 TXD OUT 2 RXD IN 3 GND — Pin no.
© 3M 2008. All Rights Reserved. 47 3M™ Digital Projector DX70i A ppendices Regulation & Safety notices This appendix lists the general notices of your Projector . FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules.
48 © 3M 2008. All Rights Reserved. Appendices 3M™ Digital Projector Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.this device may not cause harmful interference, and 2.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté 3M DX701i c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du 3M DX701i - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation 3M DX701i, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le 3M DX701i va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le 3M DX701i, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du 3M DX701i.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le 3M DX701i. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei 3M DX701i ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
