Manuel d'utilisation / d'entretien du produit G4203P du fabricant Directed Electronics
Aller à la page of 20
Responder One Remote Star t Owner's Guide © 2008 Directed Electronics, Vista, CA G4203P 2008-09.
.
Contents Government Regulations ....................................................................................5 W arning! Safety first .........................................................................................7 What is Included ..
4 © 2008 Directed Electronics. All rights reserved. Government Regulations This device complies with Par t 15 of FCC rules. Operation is subject to the fol- lowing two conditions: (1) This device may.
5 © 2008 Directed Electronics. All rights reserved. W arning! Safety first The following safety warnings must be obser ved at all times: Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer .
6 © 2008 Directed Electronics. All rights reserved. After the remote star t module has been installed, contact your authorized dealer to have him or her test the remote star t module by performing the Safety Check outlined in the product installation guide.
7 © 2008 Directed Electronics. All rights reserved. What is Included The control module • T wo 1-button transmitters • (P/N 7211P) A push-button programming switch • Y our warranty card • A shut-down toggle switch • Important Information Congratulations on the purchase of your remote star t keyless entr y sys- tem.
8 © 2008 Directed Electronics. All rights reserved. ➢ Battery Replacement Fr ont Elastomer contac t Fr ont Elastomer contac t Fr ont Elastomer contac t + + + Circuit Boar d Fr ont Elastomer contac t Fr ont Elastomer contac t Fr ont Elastomer contac t + + + Circuit Boar d Using a small slotted screw- 1.
9 © 2008 Directed Electronics. All rights reserved. Using Y our System ➢ Unlocking Only after the vehicle is remotely star ted via the transmitter , press and release the transmitter button for 1 second to unlock the vehicle’ s doors. The remote responds with 2 shor t beeps and the green LED on the re- mote flashes once.
10 © 2008 Directed Electronics. All rights reserved. Note: In order for the ignition controlled door locks to work, the feature must be turned on in programming. Note: If the ignition is turned on while the vehicle is remote started the doors do not lock until the remote star t shuts of f.
11 © 2008 Directed Electronics. All rights reserved. T o shut of f the remote start: While the vehicle is remote started press and hold the button on the remote for 3 seconds. The remote plays the remote start shut of f tones and the orange LED flashes 1 time.
12 © 2008 Directed Electronics. All rights reserved. ➢ Valet T ake-Over The V alet T ake-Over feature allows the vehicle to remain running after the key has been removed from the ignition.
13 © 2008 Directed Electronics. All rights reserved. Programming options Programming options control your system's normal operational set-up. Most options do not require additional par ts, but some may require installation labor . The following is a list of the programmable options, with the factor y settings in bold .
.
15 © 2008 Directed Electronics. All rights reserved. Cut along the dotted line and fold to keep in purse or wallet for a quick and easy reference. ✂ ✂ Quick Reference Guide T o remote star t the vehicle Press and release the transmitter button for 1-second.
.
17 © 2008 Directed Electronics. All rights reserved. Limited lifetime consumer warranty Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace (at Directed’ .
18 © 2008 Directed Electronics. All rights reserved. WITHOUT LIMIT A TION, LIABILITY FOR THEFT , DAMAGE AND/OR V ANDALISM. THIS W ARRANTY DOES NOT COVER LABOR COSTS FOR MAINTENANCE, REMOV AL OR REINST ALLA TION OF THE UNIT OR ANY CONSEQUENTIAL DAMAGES OF ANY KIND.
.
G4203P 2008-09 Vista, CA 92081 www .directed.com © 2008 Directed Electronics—All rights reser ved The company behind this system is Directed Electronics Since its inception, Directed Electronics has had one purpose, to provide consumers with the finest vehicle security and car stereo products and accessories available.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Directed Electronics G4203P c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Directed Electronics G4203P - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Directed Electronics G4203P, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Directed Electronics G4203P va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Directed Electronics G4203P, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Directed Electronics G4203P.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Directed Electronics G4203P. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Directed Electronics G4203P ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
