Manuel d'utilisation / d'entretien du produit VSS-204TW du fabricant Directed Audio
Aller à la page of 31
y VSS-204TW 2- WAY S ECURITY AND C ONVENIENCE S YSTEM O WNER ’ S M ANUAL © 2006 ASTROFLEX ELECTRONICS.
Table of contents What is included ...................................................................................................................................................................... 1 2-way LCD remote control ......................
Diagnostics ............................................................................................................................................................................. 17 Arming diagnostics ...........................................
What is included Control module with integrated shock sensor 1 transceiver/antenna 1 four-button 2-way LCD transmitter 1 three-button transmitter Wire harnesses Dual diode harn.
Important information Congratulations on the purchase of your state-of -the-art vehicle security system. This system has been designed to provide years of trouble-free oper ation. Due to the complexity of this system, it must be installed by an authorized dealer only.
Remote control functions The remote control buttons are used to send commands to the system. The descriptions below reflect the standard configuration for this syste m. The buttons can be custom configured for the user’s specific needs by the installer.
S TANDARD LCD ICON CONFIGURATIONS The transmit icon w ill be displayed while t he remote control is transmitting a command to the vehicle. The receive icon will be dis p la yed while the remot e control is receiving a page from the vehicle.
Remote operation The system operates at 434 MHz. The high frequency combined with Binary Data communication achieves superior range with two way communication. S YSTEM SIGNAL PAGING FEATURES A page is the signal the control modu le sends to the remote control as confirmation of receipt of a command or alarm system status.
Programming LCD remote T O ENTER PROGRAMMING MODE Press and hold the button until one long beep is heard. Programming mode to customize the remote’s response is now entered. NOTE : If no buttons are pressed within 5-seconds, programming mode will exit with 2-beeps.
P AGE NOTIFICATION The remote control can be programmed to notify the user of a page (audibly beeping if the vehicle’s status changes, e.g. door unlocked, engi n e started, vehicle violation, etc.). On the LCD remote press to select page On/Off. One beep is page On, Two beeps is page Off.
P ASSIVE ARMING The system can be programmed to arm itself automa tically (called passive arming). If the system is programmed for passive arming, it will automatically arm 30 seconds after the ignition is turned off and the system detects that you have left the vehicle by opening and closing a door.
bypassed. Press a third time within five seconds: The pa rking lights flash three times. Zone 4 is now bypassed. Press a fourth time within five seconds: The pa rking lights flash four times. Zone 7 is now bypassed. Press a fifth time within five seconds: The park ing lights flash five times.
2. If a switch (Zone 1, 3, 5, or 6) triggered the system, the remote will emit 4 quick beeps and the LCD screen will indicate which switch (5-flashes) tripped the alarm. 3. If the system was triggered so many times that NPC is active the remote will emit the above notifications with 5 beeps instead of 4.
(This is the factory setting.) S ILENT MODE To temporarily turn off the arm or disarm chirps, use Silent Mode™. Simply press for less than one second before arming or disarming, and the confirmation chirp(s) will be eliminated for that one operation only.
V ALET MODE You can prevent your security system from auto matically arming and triggering by using Valet Mode. This is very useful when washing the vehicle or having it serviced. In Valet Mode, the security system will not arm, even with the remo te transmitter, but all convenience functions (door locks, trunk release, etc.
2. Turn the ignition On for more than 1-second and less than 3-seconds. 3. The siren will chirp once to indicate one-time bypass has been activated. To cancel one-time bypass perform one of the following: Arm then disarm the alarm. Turn the ignition On for more than 3-seconds.
Auxiliary outputs (options) This system also supplies outputs that can control convenience op tions such as remote control trunk release and window automation. Consult your dealer for available options for your system. Channel 2 Trunk release: When connected, pressing for 1.
NOTE : The LCD transmitter will also have the zone 2 icon and the alarm icon indicating. 4. The in vehicle LED will illuminate continuo usly for the duration of shock adjustment mode. NOTE : When the shock sensor adjustment mode is entered, all other timers and operations are bypassed until shock sensor adjustment mode is exited.
NOTE : When the shock sensor adjustment mode is ex ited, the bar indicator will indicate continuously . For example if level 15 was being set (bars 1 through 7 indicating cont inuously, and bar 8 flashing), upon exiting adjustment mode bars 1 th rough 8 will indicate continuously.
Diagnostics The microprocessor at the heart of your security system is constantly monitoring all of the switches and sensors that are connected to it. It detects any faulty switches and sensors and prevents them from disabling the entire syste m. The microprocessor will also record and report any triggers that occurred during your absence.
T ABLE OF ZONES The zone number is the number of LED flashes used by the system to identify that input. The standard input assignments are listed below, along wi th spaces to write in any optional sensors or switches you have had installed.
High frequency Your system transmits and receives at 434 MHz. This provides a cleaner spectrum with less interference and a more stable signal. Enjoy a phenomenal increase in range – even in areas with high radio interference. Owner recognition Using a hand-held programming tool, your dealer can program many of the system settings.
Programming Programming options control what your system do es during normal operation, and require few or no additional parts. However, some ma y require additional installation labour.
RUN position and pressing the Valet ® button the programmed number of times. AED is disabled when the system is in Valet ® Mode. NOTE : This feature will only function if the Failsafe ® Starter Kill relay has been installed. Full trigger response 30 or 60 seconds: This determines how long the full triggered sequence lasts.
V EHICLE RECOVERY SYSTEM (VRS ® ) The optional VRS ® feature is designed to ensure that any un authorized user of your vehicle (even if using your keys and remote co ntrol) will not be able to perm anently separate you from your vehicle.
Fifteen seconds after the siren chirps begin, the siren’s output will change to a continuous blast. From this point on, when the igni tion key is turned off, the VRS ® will immediately turn on the starter kill. This will prevent the vehicle from being restarted, thus immobilizing it at that spot.
Programming options See your dealer for further details on the opti ons listed below available with this system. Automatic Engine Disable : Prevents the vehicle from being started even if the vehicle is not armed after turning the ignition Off and exiting the vehicle.
Security & convenience expansions Here we have listed only some of the many ex pansion options available. Please contact your dealer for a complete explanation of all the options available to you. Audio Sensor : Metal on glass, glass cracking, and breaking glass each produce distinctive acoustic signatures.
Glossary of terms Automatic Engine Disable (AED) : This feature protect the vehicle from being stolen at all times, regardless of whether or not the alarm is armed. If AED is programmed on, the starter of the vehicle will be disabled 30 seconds af ter the ignition is turned off.
QUICK REFERENCE GUIDE To arm using your remote You can activate, or arm, the system by pressing on your remote for one second. When the system arms, you will hear a short siren sound, or chirp, and the parking lights will flash once. If the vehicle’s power door locks have been connected to the system, the doors will lock.
The company behind this system is Astroflex El ectronics, member of Dir ected Electronics, Inc. Call (888) 892-7876 for more information about our products and services. Astroflex Electronics is committed to delivering world class quality products and services that excite and delight our customers.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Directed Audio VSS-204TW c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Directed Audio VSS-204TW - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Directed Audio VSS-204TW, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Directed Audio VSS-204TW va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Directed Audio VSS-204TW, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Directed Audio VSS-204TW.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Directed Audio VSS-204TW. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Directed Audio VSS-204TW ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
