Manuel d'utilisation / d'entretien du produit CLASSIC PLUS 14 du fabricant Denso
Aller à la page of 26
T echnical Services Department DSCA P/N: LA990009-1217 Fourth Issue: April 2003 GAC P/N: LA484007-1431 Printed in the U.S.A. DENSO SALES CALIFORNIA, INC.
LIMITED W ARRANTY DENSO SALES CALIFORNIA, INC. ("DENSO") warrants its MOVINCOOL Products only to the extent stated in its of ficial written warranties.
OPERA TION MANUAL CLASSIC PLUS 14 and CLASSIC PLUS 26.
ii.
iii TABLE OF CONTENTS FOREWORD ............................................................................................ 1 Definition of T erms .......................................................................... 1 GENERAL WARNINGS & CAUTIONS .
iv.
1 FOREWORD Congratulations on pur chasing the MovinCool portable air conditioner . This manual explains how to assemble, install, operate, and maintain the MovinCool Classic Plus 14 and Classic Plus 26 portable air condi- tioning units.
2 GENERAL W ARNINGS & CAUTIONS • All electrical work, if necessary , should only be performed by qualified electrical personnel. Repair to electrical components by non-certified technicians may result in personal injur y and/or damage to the unit.
3 INVENTOR Y & ASSEMBL Y Inventory After unpacking your MovinCool unit, please check to make sur e you have the following items: ❏ Classic Plus 14 or Classic Plus 26 MovinCool Unit (1) ❏ Cool .
4 INVENTOR Y & ASSEMBL Y Assembly CAUTION: Befor e assembling make sure the unit is on a flat, level surface and the casters ar e in the LOCKED position. (Both the Classic Plus 14 and Classic Plus 26 MovinCool units have locking swivel casters in the front only .
5 INST ALLA TION Choosing and Installation Site CAUTION: Following are some pr ecautions to consider before choosing your installation site. Please review car efully as improper installation may r esult in personal injury or damage to the unit. • Do not use the unit in areas wher e leakage of flammable gas may occur .
6 INST ALLA TION (cont.) Moving the Unit Unlock the casters and push the MovinCool unit fr om the front panel edge to a flat, level surface and set the casters back to the LOCKED position.
7 INST ALLA TION (cont.) Plugging in the Unit • Check the pr ongs and sur face of the power cor d plug for dust/dirt. If dust and/or dirt are pr esent, wipe off with a clean, dry cloth. • Check the power cor d, plug and prongs for damage or excess play .
8 FEA TURES Both models feature: • An electronic contr ol panel which allows the user to control the unit’ s operation easily . • Dual fan speeds (either High or Low) in both COOL and Fan Only modes. •A digital display that indicates the temperatur e SET POINT (either Fahrenheit or Celsius) in which the COOL Mode will operate.
9 OPERA TION Control Panel Befor e operating the unit, it is impor tant to familiarize yourself with the basic controls located on the contr ol panel. ➀ C OOL ON/OFF Activates/deactivates the COOL mode/ Button turns the unit off. ➁ F AN ON/OFF Activates/deactivates the HIGH or LOW Buttons fan mode.
10 OPERA TION (cont.) Operating in COOL Mode The unit can be operated in COOL mode by pr essing the COOL ON/OFF button (LED illuminates). NOTE: In COOL mode the unit can only be turned off by pressing the COOL ON/OFF button again, not by pressing the fan buttons.
11 OPERA TION (cont.) Operating Modes Both Classic Plus models operate in 2 modes, F AN Only and COOL . When in F AN Only mode the unit circulates the surrounding air .
12 OPERA TION (cont.) Emptying the Drain T ank During COOL mode, condensate will accumulate in the drain tank. When the drain tank becomes full, the FULL T ANK LED will flash and the unit will shut off automatically . NOTE: If you want to empty the drain tank, while the unit is in operation, press the COOL ON/OFF button to turn the unit off.
13 OPERA TION (cont.) DRAIN PUMP KIT (Optional) (Classic Plus 14 model ONL Y) A drain pump kit (CPK-3) is available to allow continuous operation and to eliminate the need for a drain tank. • When the water collects to level (A) in the pump reservoir , the drain pump begins to operate and dischar ge the water .
14 OPERA TION (cont.) DRAIN PUMP KIT (Optional) (Classic Plus 26 model ONL Y) A drain pump kit (CPK-4) is available to allow continuous operation and to eliminate the need for a drain tank. • When the water collects to level (A) in the pump reservoir , the drain pump begins to operate and dischar ge the water .
15 DAIL Y INSPECTION & MAINTENANCE Emptying the Drain T ank To empty the drain tank, refer to instructions on page 12. Cleaning the Air Filters Clean the air filters once a week. If the unit is used in a dusty environ- ment, mor e frequent cleaning may be requir ed.
16 DAIL Y INSPECTION & MAINTENANCE (cont.) In-Season/Off-Season Inspection & Maintenance ■ In-Season ➀ Check the prongs and surface of the power cor d plug for dust and/or dirt. If dust and/or dirt are pr esent, wipe off with a clean, dry cloth.
17 Self-Diagnostic Codes Self-Diagnostic Codes will be displayed on the Contr ol Board under the following conditions: Code Condition dF When the evaporator thermistor disengages the compr essor . FL When the drain tank switch shuts off the unit ( FULL T ANK LED flashes).
18 TECHNICAL SPECIFICA TIONS MODEL ITEM/FEA TURES Classic Plus 14 Classic Plus 26 Rating Conditions dry bulb 95 o F (35 o C) 95 o F (35 o C) wet bulb 83 o F (28.3 o C) 83 o F (28.3 o C) humidity (60%) (60%) Specifications power frequency 60Hz 60Hz line voltage, single phase 115 V 208/230V power consumption 1.
LIMITED W ARRANTY DENSO SALES CALIFORNIA, INC. ("DENSO") warrants its MOVINCOOL Products only to the extent stated in its of ficial written warranties.
T echnical Services Department DSCA P/N: LA990009-1217 Fourth Issue: April 2003 GAC P/N: LA484007-1431 Printed in the U.S.A. DENSO SALES CALIFORNIA, INC.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Denso CLASSIC PLUS 14 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Denso CLASSIC PLUS 14 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Denso CLASSIC PLUS 14, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Denso CLASSIC PLUS 14 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Denso CLASSIC PLUS 14, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Denso CLASSIC PLUS 14.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Denso CLASSIC PLUS 14. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Denso CLASSIC PLUS 14 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
