Manuel d'utilisation / d'entretien du produit E157FP du fabricant Dell
Aller à la page of 28
Dell™E157FPFlatPanelColorMonitorUser'sGuide Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2007 - 2008DellInc.Allrightsreserved. Reproduction in any manner whatsoever without the written permission of Dell Inc.
Back to Index Page About Your Monitor Dell™E157FPFlatPanelColorMonitorUser'sGuide Front View Back View Bottom View Side View Specifica.
Bottom View Side View A Dell Soundbar mounting brackets - Attach the optional Dell Soundbar. B Security lock slot - Attach a lock to secure your monitor. C Stand Release button - Press to release the stand. D VESA mounting holes (100mm - Behind attached stand) - Use to mount monitor.
Specifications General Flat Panel Resolution Preset Display Modes Electrical Physical Characteristics Environmental PowerManagementMode.
Electrical Video input signals Analog RGB, 0.7 Volts +/ - 5%, 75 ohm input impedance Synchronization input signals Separate horizontal and vertical; 3.3V CMOS or 5V TTL level, positive or negative sync. AC input voltage / frequency / current 100~240 VAC/ 50 - 60 Hz 1.
Power Management Modes If you have VESA's DPMS compliant display card or software installed in your PC, the display can automatically reduce its power consumption when not in use. If input from keyboard, mouse or other input devices is detected, the display will automatically "wake up".
Plug and Play Capability You can install the display in any Plug and Play - compatible system. The display automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the display settings.
Back to Contents Page Appendix Dell™E157FPFlatPanelMonitorUser'sGuide FCC Notice (U.S. Only) CAUTION: Safety Instruction Contacting Dell FCC Notice (U.
l Place the monitor on a solid surface and treat it carefully. The screen is made of glass and can be damaged if dropped or hit sharply. l Locate your monitor near an easily accessible electric outlet.
Switchboard 0820 240 530 00 Bahamas Website: www.dell.com.bs E- mail: la - techsupport@dell.com General Support toll - free: 1 - 866 - 874 - 3038 Barbados Website: www.dell.com/bb E- mail: la - techsupport@dell.
Large Corporate Accounts North Government and Education toll - free: 800 858 2955 Large Corporate Accounts East toll - free: 800 858 2020 Large Corporate Accounts East Government a.
Country Code: 49 City Code: 69 Technical Support for all other Dell computers 069 9792 - 7200 Home/Small Business Customer Care 0180 -5- 224400 Global Segment Customer Care.
Customer Care 02 577 825 55 Fax 02 575 035 30 Switchboard 02 577 821 Jamaica E- mail: la - techsupport@dell.com General Support (dial from within Jamaica only) 1- 800 - 440 - 9205 Japan (Kawasaki) International Access Code: 001 Country Code: 81 City Code: 44 Website: support.
or 01 - 800 - 888 - 3355 Montserrat E- mail: la - techsupport@dell.com General Support toll - free: 1 - 866 - 278 - 6822 Netherlands Antilles E- mail: la - techsupport@dell.
Slovakia (Prague) International Access Code: 00 Country Code: 421 Website: support.euro.dell.com E- mail: czech_dell@dell.com Technical Support 02 5441 5727 .
Back to Contents Page Country Code: 44 City Code: 1344 support.euro.dell.com/uk/en/ECare/Form/Home.asp Sales Home and Small Business Sales 0870 907 4000 Corporate/Publi.
Back to Contents Page Using the OSD DellT E157FP Flat Panel Monitor User's Guide Connecting Your Monitor Using the Front Panel Buttons Using the OSD UsingtheDell™Soundbar(Optional) Connecting Your Monitor 1. Turn off your computer and unplug its power cable.
On Screen Menu/Display (OSD) Direct - Access Functions Using the OSD Accessing the Menu System 1. With the menu off, press the 'MENU' button to open the OSD system and display the main features menu. Brightness/Contrast Hot Key B C - and + buttons Use these buttons to adjust (decrease/increase ranges) items in the OSD.
2. Press the - and + buttons to move between the function icons. As you move from one icon to another, the function name is highlighted to reflect the function or group of functions (sub - menus) represented by that icon. See the table below for a complete list of all the functions available for the monitor.
Phase If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock 'adjustment and then use 'Phase' again. NOTE:Thisfunctionmaychangethewidthofthedisplayimage.
Automatic Save With the OSD open, if you make an adjustment and then either proceed to another menu, or exit the OSD, the monitor automatically saves any adjustments you have made. If you make an adjustment and then wait for the OSD to disappear the adjustment will also be saved.
OSD Warning Messages A warning message may appear on the screen indicating that the monitor is out of sync. This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use.
Soundbar Attachment to the Monitor Back to Contents Page 1. Headphone connectors 2. Power indicator 3. Power/Volume control 1. Working from the rear of the monitor, attach the Soundbar aligning the two slots with the two tabs along the bottom rear of the monitor.
Back to Contents Page Product Specific Problems DellT E157FP Flat Panel Monitor User's Guide Monitor Specific Troubleshooting Common Problems Product Specific Problems Moni.
Product Specific Problems l Adjust Phase and Clock controls through OSD l Perform monitor reset l Check environmental factors l Relocate and test in another room Missing Pixels LCD screen has spots l .
Back to Contents Page if necessary. l Re - boot the computer or video player. OSD Lock All buttons are locked except the "menu" button. No user adjustments are allowed. l Press the "menu" button for over 15 seconds to unlock the OSD menu.
Back to Contents Page Using Your Monitor Stand DellT E157FP Flat Panel Monitor User's Guide Attaching the Stand Organizing Your Cables Using the Tilt Removing the Stand Attaching the Stand 1. Place the stand on a flat surface. 2. Fit the groove on the back of the monitor onto the two teeth of the upper stand.
Tilt With the built - in pedestal, you can tilt the monitor for the most comfortable viewing angle. Removing the Stand After placing the monitor panel on a soft cloth or cushion, press and hold the LCD removal button, and then remove the stand.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Dell E157FP c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Dell E157FP - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Dell E157FP, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Dell E157FP va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Dell E157FP, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Dell E157FP.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Dell E157FP. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Dell E157FP ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
