Manuel d'utilisation / d'entretien du produit 51M200 du fabricant Daewoo
Aller à la page of 64
PROJECTION MONIT OR Operating Guide for 51M200, 65M200, 51M200A IMPORT ANT SAFETY INSTRUCTIONS ................................................................................ 2-3 FIRST TIME USE ........................................................
IMPORT ANT SAFETY INSTRUCTIONS 2 SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR ASPECT PROJECTION MONITOR Our reputation has been built on the quality , performance, and ease of service of ASPECT Projection Monitors. Safety is also foremost in our minds in the design of these units.
IMPORT ANT SAFETY INSTRUCTIONS 3 Read before operating equipment Follow all warnings and instructions marked on this Projection Monitor . 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water .
ACCESSORIES 4 FIRST TIME USE 1. Remote Control Unit is either CLU-4330UG (Part No. HL02251). 2. T wo “AA” size, 1.5V batteries (For Remote Control Unit). REMOTE CONTROL BA TTER Y INST ALLA TION AND REPLACEMENT 1. Open the battery cover of the remote control by pushing the notched part of the cover with your fingers and pulling the cover off.
HOW T O SET UP YOUR NEW HIT ACHI PROJECTION MONIT OR 5 FIRST TIME USE CAUTION: Magnetic fields, such as those of external speakers, may cause the picture to distort if they are placed too close to the Projection Monitor . Move the magnetic field source away from the Projection Monitor until there is no picture distortion.
HOOK-UP CABLES AND CONNECT ORS 6 FIRST TIME USE Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products.
FRONT P ANEL CONTROLS 7 FIRST TIME USE MAGIC FOCUS INPUT 5 S-VIDEO VIDEO AUDIO L/MONO R EXIT INPUT SELECT MENU VOL- VOL+ POWER PULL ASPECT POWER.
FRONT P ANEL JACKS AND CONNECT ORS 8 FIRST TIME USE The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples: NOTE: 1. Completely insert connection cord plugs when connecting to front panel jacks.
REAR P ANEL JACKS 9 FIRST TIME USE Audio/Video Inputs 1, 2, 3 and 4 The VID1~VID4 buttons will select each video source each time they are pressed. Use the audio and video inputs to connect external devices, such as VCRs, camcorders, laserdisc players, DVD players etc.
REAR P ANEL JACKS 10 FIRST TIME USE Component: Y -P B P R Inputs Inputs 1 and 2 provide Y -P B P R jacks for connecting equipment with this capability , such as a DVD player or Set T op Box. Y ou may use composite video signal for INPUT :2. NOTES: 1.
REAR P ANEL CONNECTIONS 11 FIRST TIME USE NOTE: 1. Connect only 1 component to each input jack. 2. Follow connections that pertain to your personal entertainment system. 3. Composite video signal can be input to Input2~Input5. 4. Cables are not included with the purchase of this Projection Monitor .
• S-VIDEO and DVI-HDTV connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connections in place of the standard video connection if your device has this feature. • If your device has only one audio output (mono sound), connect it to the left audio jack on the Projection Monitor .
FIRST TIME USE 13 CONNECTING EXTERNAL AUDIO DEVICES T o control the audio level of an external audio amplifier with the remote control, connect the system as shown below .
FIRST TIME USE 14 CONNECTING EXTERNAL VIDEO SOURCES The exact arrangement you use to connect the VCR, camcorder , laserdisc player , DVD player , or HDTV Set T op Box to your Projection Monitor is dependent on the model and features of each component.
15 FIRST TIME USE CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A MONAURAL AUDIO SOURCE TO INPUT1~INPUT5 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the Projection Monitor below . 2.
16 FIRST TIME USE CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A STEREO SOURCE TO INPUT1~INPUT5 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the Projection Monitor below . 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
17 FIRST TIME USE CONNECTING EXTERNAL VIDEO SOURCES CONNECTING AN S-VIDEO SOURCE TO INPUT 3, 4 AND 5 1. Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the Projection Monitor below . 2.
18 FIRST TIME USE CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A COMPONENT SOURCE WITH DVI-HDTV CAP ABILITY TO INPUT 1 . 1. Connect the DVI connection cable from the output of the HDTV set top box or DVD player to the DVI-HDTV input as shown on the Projection Monitor below .
CONNECTING EXTERNAL VIDEO SOURCES 19 FIRST TIME USE CONNECTING A COMPONENT SOURCE TO INPUT 1 OR 2: Y -P B P R . 1. Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the Projection Monitor below .
20 THE REMOTE CONTROL THE REMOTE CONTROL In addition to controlling all the functions on your ASPECT Projection Monitor , the new remote control is designed to operate di f- ferent types of VCRs, CBL (Cable TV) converters, satellite receivers, DVD players, and other audio/video equipment.
21 THE REMOTE CONTROL HOW T O USE THE REMOTE TO CONTROL YOUR PROJECTION MONIT OR POWER button Press this button to turn the Projection Monitor on or off when the remote is in TV (Monitor) mode. PICTURE-IN-PICTURE buttons See separate section on pages 25, 26 and 27 for description.
THE REMOTE CONTROL 22 HOW T O USE THE REMOTE TO CONTROL YOUR PROJECTION MONIT OR CHANNEL selector buttons [Cable Box/Satellite Receiver (CBL/SA T)Mode Only] These buttons are only applicable when the remote control is in CBL/SA T mode. CHANNEL selector buttons are used to select channels, lock access code, etc.
23 THE REMOTE CONTROL HOW T O USE THE REMOTE TO CONTROL YOUR PROJECTION MONIT OR SIZE button Press this button to quickly change the picture format SIZE ratio. Depending on the input signal, the picture format ratio allows you to adjust the images through the following options.
24 THE REMOTE CONTROL HOW T O USE THE REMOTE TO CONTROL YOUR PROJECTION MONIT OR SLEEP button Show and set your SLEEP timer for up to 3 hours in 15 minute intervals.
25 THE REMOTE CONTROL Use above connection to view VCR program as a sub-picture while viewing another program as main picture (VID 1, VID2, VID3, VID5). PIP button Press the PIP button and a sub-picture will appear in one of the three dif ferent modes (POP , PIP or SPLIT), depending on the last selection of the PIP mode.
햴 PIP MODE button T o change between the different PIP modes (POP , PIP or SPLIT) press the PIP MODE button when PIP is ON. Each press of this button will change PIP to a dif ferent mode.
THE REMOTE CONTROL 27 PICTURE-IN-PICTURE (PIP) FREEZE button (With PIP ON) If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when trying to write down the address for a mail order company , recording statistics for a sporting event, etc.
28 THE REMOTE CONTROL USING THE REMOTE T O CONTROL VCR FUNCTIONS Operating the precoded function for your VCR. This remote is designed to operate different types of VCRs. Y ou must first program the remote to match the remote system of your VCR. 1. T urn ON your VCR.
29 THE REMOTE CONTROL USING THE REMOTE T O CONTROL CABLE/SA TELLITE BOX FUNCTIONS Operating the precoded function for your cable/satellite box. This remote is designed to operate different types of cable/satellite boxes. Y ou must first program the remote to match the remote sys- tem of your cable/satellite box .
30 THE REMOTE CONTROL USING THE REMOTE T O CONTROL DVD FUNCTIONS Operating the precoded function for your DVD player . This remote is designed to operate different types of DVD players. Y ou must first program the remote to match the remote system of your DVD player .
31 ON-SCREEN DISPLA Y ON-SCREEN DISPLA Y (OSD) POWER PULL ASPECT 1. Press MENU on the remote control to display the different features on your ASPECT Projection Monitor . 2. Press the CURSOR , , and to highlight a dif ferent feature, then press SELECT to choose.
32 ON-SCREEN DISPLA Y ON-SCREEN DISPLA Y (OSD) Picture Mode Select between the two picture modes; Day and Night. Contrast Adjust contrast. Brightness Adjust brightness.
VIDEO 33 ON-SCREEN DISPLA Y Color Brightness Contrast Picture Mode Video Move SEL Return Color Temperature Sharpness Tint Reset Video Settings Edge Enhancement Setup Locks Aspect Audio Video Move SEL .
VIDEO 34 ON-SCREEN DISPLA Y Use this function to change the contrast between black and white levels in the picture. Use the CURSOR or to highlight the function to be adjusted. Press the SELECT button to select the function settings. Press the CURSOR or to adjust the function.
VIDEO 35 ON-SCREEN DISPLA Y This function allows you to Reset the Video Menu Settings of the present input and return it to the Day VIDEO mode. Use CURSOR to highlight functions. Press the SELECT button to select Reset V ideo Settings. Use CURSOR to access other video settings.
VIDEO 36 ON-SCREEN DISPLA Y Use this function to adjust the percentage of Red, Green and Color according to the user ’ s preference. Use TINT to adjust flesh tones so they appear natural.
37 ON-SCREEN DISPLA Y AUDIO Select AUDIO to adjust the Projection Monitor to your preference and to improve the sound quality . Audio Sound Enhancement Balance Bass Treble Audio Move SEL Return Intern.
AUDIO 38 ON-SCREEN DISPLA Y Sound Enhancement The following surround settings will reproduce the “live” sound you would hear in concert halls, sports stadiums, movie theaters, etc.
39 ON-SCREEN DISPLA Y ASPECT Aspect Mode Auto Aspect Automatically adjust the Aspect Ratio depending on the input signal to fill the screen. Press CURSOR , , and to select menu item. Press the SELECT button to select. A “ ” in the box indicates that the feature is ON.
LOCKS 40 ON-SCREEN DISPLA Y This function is only available if used in conjunction with an external tuner . This function will block out the picture and sound of the selected channel or video input. It can also be used to keep the Projection Monitor from being viewed for a scheduled time period that you set.
LOCKS 41 ON-SCREEN DISPLA Y Use MOVIE RA TINGS to prevent viewing of any movie that you feel may be inappropriate due to its content. Use CURSOR or to select the MOVIE RA TING category that you want to block. Press SELECT to block the MOVIE RA TING that you have selected.
LOCKS 42 ON-SCREEN DISPLA Y TV Ratings Locks Move SEL Return TV Ratings Movie Ratings Engage Lock Change Access Code Locks Status TV Ratings Move SEL Select Canadian Ratings (Eng) Canadian Ratings (Fr.
LOCKS 43 ON-SCREEN DISPLA Y Canadian Ratings (Eng) Locks Move SEL Return Canadian Ratings (Eng) Movie Ratings Engage Lock Change Access Code Locks Status TV Ratings Move SEL Select Canadian Ratings (E.
44 ON-SCREEN DISPLA Y LOCKS Canadian Ratings (Frn) Locks Move SEL Return Canadian Ratings (Frn) Movie Ratings Engage Lock Change Access Code Locks Status TV Ratings Move SEL Select Canadian Ratings (E.
SETUP 45 ON-SCREEN DISPLA Y Select SETUP when setting your Projection Monitor up for the first time. Use the CURSOR or on the remote to highlight the function desired.
SETUP 46 ON-SCREEN DISPLA Y MAGIC FOCUS MAGIC FOCUS Auto Digital Convergence Adjustment Please turn ON your Projection Monitor for at least 20 minutes before using this feature. The Magic Focus button on control panel will not work when adjustment mode is set to Manual (see page 47).
SETUP 47 ON-SCREEN DISPLA Y Manual Convergence Adjustment Mode Using the Remote Control, select SETUP-MAGIC FOCUS TUNE UP-MANUAL ADJUSTMENT MODE-ST ART to access convergence crosshatch pattern. The adjustment point is indicated by the Adjustment Point Cursor .
SETUP 48 ON-SCREEN DISPLA Y This feature will allow you to select any one of three different languages for all on-screen displays. Use CURSOR or to highlight the language of your choice. Press SELECT to select the highlighted language. Press EXIT to quit menu or select MENU PREFERENCE to return to previous menu.
SETUP 49 ON-SCREEN DISPLA Y The clock must be adjusted before you can use the “Set Event T imer” features. Use CURSOR or to set the time and date. Press CURSOR or to change position. Press EXIT to quit menu or select SET THE CLOCK to return to previous menu.
SETUP 50 ON-SCREEN DISPLA Y Use this feature to give a name to any of the five video inputs. Press CURSOR , , , to highlight the name of the video inputs. Press the SELECT button to select desired input name. Select RESET to set video names to original factory preset condition.
SETUP 51 ON-SCREEN DISPLA Y Set The Color System Set Virtual HD Set Black Side Panel This function allows you to automatically change tint and color coordinates for DTV programs. HDTV - High Definition T elevision - Use for High Vision Signal Y -P B P R from HDTV Set-T op Box.
SETUP 52 ON-SCREEN DISPLA Y Caption Display: On/Off will turn the display on or of f. Auto will turn the display on when Mute/Soft Mute is on. Caption Mode: Captions is for the program you are viewing. T ext is for additional information such as news reports or a TV program guide.
53 CARE OF YOUR ASPECT PROJECTION MONIT OR AND YOUR REMOTE CONTROL DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty .
54 Reception Problems • IGNITION NOISE: Black spots or horizontal streaks may appear , picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. • GHOSTS: Ghosts are caused by the television signal following two paths.
USEFUL INFO 55 ASPECT Projection Monitor incorporates advanced power surge protection technology designed to protect against component or circuit damage due to external or internal voltage power surges. IF YOUR PROJECTION MONIT OR SHOULD APPEAR TO HA VE A LOSS OF POWER, PLEASE FOLLOW THIS PRO- CEDURE: 1.
USEFUL INFO 56 • V elocity Modulation • Six Aspect Modes • Closed Caption Decoder • Picture in Picture • Magic Focus (Auto Digital Convergence and Manual Adjustment) • Video Input Sensor • 3 Dimensional Y/C Comb Filter • Compatible with 1080i, 720p, 480p and 480i input signals.
USEFUL INFO 57 ASPECT Brand Electronics 2420 Fenton Street Chula Vista, CA 91914 ASPECT Brand Electronics ASPECT has made every ef fort to assure you hours of trouble free operation from your unit. However , should you require serv- ice, a network of ASPECT Authorized Service Facilities has been established in all 50 states and Puerto Rico.
58 INDEX A Accessories, 4 Aspect Ratio, 23 Audio (Sound Enhancement) SRS, 38 BBE, 38 Audio Settings, 37 - 38 Auto Color , 36 B Balance, 37 Bass, 37 Black Enhancement, 34 Black Side Panel, 51 Brightnes.
59 NOTES.
60 NOTES.
61 NOTES.
62 NOTES.
NOTES 63.
QR64461.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Daewoo 51M200 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Daewoo 51M200 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Daewoo 51M200, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Daewoo 51M200 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Daewoo 51M200, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Daewoo 51M200.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Daewoo 51M200. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Daewoo 51M200 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
