Manuel d'utilisation / d'entretien du produit version 1.0 du fabricant D-Link
Aller à la page of 104
.
2 D-Link DIR-300 User Manual T able of Contents P ack age Cont ents ................................................................................. 4 Syst em Requirements ................................................................. 4 Introduction .
3 D-Link DIR-300 User Manual T able of Contents Statistics ................................................................................. 51 Active Session ..................................................................... 51 Wir eless .........
4 D-Link DIR-300 User Manual Section 1 - Product Overview • D-Link DIR-300 W ireless Router • Power Adapter • Ethernet Cable • Manual and W arranty on CD System Requir ements • Ethernet-base.
5 D-Link DIR-300 User Manual Section 1 - Product Overview Intr oduction D-Link, the industry leader in wireless networking, introduces another breakthrough in wireless connectivity . The D-Link W ireless G DIR-300 Router which is capable of transferring data with a maximum wireless signal rate of up to 54Mbps* in the 2.
6 D-Link DIR-300 User Manual Section 1 - Product Overview • Faster W ireless Networking - The DIR-300 provides up to 54Mbps* wireless connection with other 802.1 1g wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio.
7 D-Link DIR-300 User Manual Section 1 - Product Overview Hardwar e Overview Connections Pressing the Reset Button restores the router to its original factory default settings. Receptor for the Power Adapter . The Auto MDI/MDIX W AN port is the connection for the Ethernet cable to the Cable or DSL modem.
8 D-Link DIR-300 User Manual Section 1 - Product Overview Hardwar e Overview LEDs W AN LED A solid light indicates connection on the W AN port. This LED blinks during data transmission. WLAN LED A solid light indicates that the wireless segment is ready .
9 D-Link DIR-300 User Manual Section 2 - Installation Befor e you Begin Installation This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage.
10 D-Link DIR-300 User Manual Section 2 - Installation W ir eless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network.
1 1 D-Link DIR-300 User Manual Section 2 - Installation If you are connecting the router to a cable/DSL/satellite modem, please follow the steps below: 1. Place the router in an open and central location. Do not plug the power adapter into the router .
12 D-Link DIR-300 User Manual Section 2 - Installation If you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have to do the following before connecting the router to your network: • Disable UPnP ™ • Disable DHCP • Change the LAN IP address to an available address on your network.
13 D-Link DIR-300 User Manual Section 2 - Installation 6. Disconnect the Ethernet cable from the router and reconnect your computer to your network. 7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router .
14 D-Link DIR-300 User Manual Section 3 - Conguration Conguration This section will show you how to congure your new D-Link wireless router using the web-based conguration utility .
15 D-Link DIR-300 User Manual Section 3 - Conguration Setup W izard Y ou may run the setup wizard from the opening Internet Se tu p wi nd ow to qui ck ly set up yo ur rou te r . Cl ic k Int er net Connection Setup Wizard , you will be directed to the rst window of the wizard.
16 D-Link DIR-300 User Manual Section 3 - Conguration Select your time zone from the drop-down menu and then click Next to continue. Select the type of Internet connection you use and then click Next t o continue. If you selected Dynamic, you may need to enter the MAC address of the computer that was last connected directly to your modem.
17 D-Link DIR-300 User Manual Section 3 - Conguration If you selected PPPoE, enter your PPPoE username and password. Click Next to continue. Select Static if your ISP assigned you the IP address, subnet mask, gateway , and DNS server addresses. Not e: Make sur e to r emo ve your PPP oE soft war e fr om your com pute r .
18 D-Link DIR-300 User Manual Section 3 - Conguration If you se le ct ed St at ic, ent er your net wo rk se tt in gs su pp lie d by you r Int er ne t pro vi der . Click Next to continue. Click Connect to save your settings. If you selected Big Pond, enter your Big Pond username and password.
19 D-Link DIR-300 User Manual Section 3 - Conguration Choose Dynamic IP Address to obtain IP Address information automatically from your ISP . Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for Cable modem services.
20 D-Link DIR-300 User Manual Section 3 - Conguration Select Dynamic (most common) or Static . Select Static if your ISP assigned you the IP address, subnet mask, gateway , and DNS server addresses. Enter your PPPoE user name. Enter your PPPoE password and then retype the password in the next box.
21 D-Link DIR-300 User Manual Section 3 - Conguration Select Dynamic (most common) or Static . Select Static if your ISP assigned you the IP address, subnet mask, gateway , and DNS server addresses. Enter the IP address (Static PPTP only). Enter the Primary and Secondary DNS Server Addresses (Static PPTP only).
22 D-Link DIR-300 User Manual Section 3 - Conguration Select Dynamic (most common) or Static . Select Static if your ISP assigned you the IP address, subnet mask, gateway , and DNS server addresses. Enter the IP address (Static L2TP only). Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).
23 D-Link DIR-300 User Manual Section 3 - Conguration Enter your Big Pond user name. Enter your Big Pond password and then retype the password in the next box.
24 D-Link DIR-300 User Manual Section 3 - Conguration Enter the IP address assigned by your ISP . Enter the Subnet Mask assigned by your ISP . Enter the Gateway assigned by your ISP . The default MAC Address is set to the W AN’ s physical interface MAC address on the Broadband Router .
25 D-Link DIR-300 User Manual Section 3 - Conguration W ir eless Setup W ireless settings for the router may be configured manually or by using a wizard. T o use the wizard, click the Wir eless Connection Setup Wizard button and then follo w the steps that are describe d belo w .
26 D-Link DIR-300 User Manual Section 3 - Conguration Use the radio buttons to select the desired level of wireless security , Best, Better , or Good, and then click Next to continue. Enter a W ireless Security Password in the textbox and then click Next to continue.
27 D-Link DIR-300 User Manual Section 3 - Conguration T o implement W i-Fi protection, or WCN 2.0, tick the Enable checkbox, click either Generate New PIN or Reset PIN to Default , and then congure the W i- Fi settings below . Please see the Setting Up W i-Fi Protection (WCN 2.
28 D-Link DIR-300 User Manual Section 3 - Conguration 1. T o enable wireless security on the Router , use the drop- do wn men u to se lec t the de sir ed op tio n. T o enab le WEP , select Enable WEP W ir eless Security (basic) . 2. Next to Authentication , select either Open or Shar ed Key .
29 D-Link DIR-300 User Manual Section 3 - Conguration 1. T o enable WP A, WP A2, or WP A/WP A2, select either En abl e WP A Only W ir ele ss Secu ri ty (e nh anc ed ), En ab le WP A2 Only W ir eless Security (enhanced), or Enable WP A/WP A2 W ir eless Security (enhanced).
30 D-Link DIR-300 User Manual Section 3 - Conguration 1. T o enable WP A, WP A2, or WP A/WP A2 for a RADIUS server , next to Security Mod e , select Enable WP A Only W ir ele ss Secur ity (enhanced), Enable WP A2 Only W ir eless Security (enhanced), or Enable WP A/WP A2 W ir eless Security (enhanced) .
31 D-Link DIR-300 User Manual Section 3 - Conguration This section will allow you to change the local network settings of the router and to congure the DHCP settings. LAN Setup Enter the IP address of the router . The default IP address is 192.168.
32 D-Link DIR-300 User Manual Section 3 - Conguration Check the box to enable the DHCP server on your router . Uncheck to disable this function. Enter the starting and ending IP addresses for the DHCP server ’ s IP assignment. The length of time for the IP address lease.
33 D-Link DIR-300 User Manual Section 3 - Conguration This section will allow you to congure, update, and maintain the correct time on the internal system clock. T ime and Date Select the T ime Zone from the drop-down menu. T ic kin g thi s che ckbo x en able s Day ligh t Sav ing time .
34 D-Link DIR-300 User Manual Section 3 - Conguration This feature allows you to create a list of websites that you want to either allow or deny users access.
35 D-Link DIR-300 User Manual Section 3 - Conguration Port Forwarding This will allow you to open a single port or a range of ports. Check the box to enabled the rule. Enter a name for the rule. Enter the IP address of the computer on your local network that you want to allow the incoming service to.
36 D-Link DIR-300 User Manual Section 3 - Conguration Application Rules Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications have difculties working through NA T (Network Address T ranslation).
37 D-Link DIR-300 User Manual Section 3 - Conguration Access Contr ol Select T urn MAC Filtering OFF , T urn MAC Fil terin g ON and ALLO W com pute rs lis ted to acc ess the network , or T urn MAC Filtering ON and DENY computers listed to access teh network .
38 D-Link DIR-300 User Manual Section 3 - Conguration Check this to enable SPI. Check this box to enable DMZ. Enter the IP address of the computer you would like to open all ports to. Choose a name for the rewall rule. Select to Allow or Deny transport of the data packets according to the criteria dened in the rule.
39 D-Link DIR-300 User Manual Section 3 - Conguration Set the transmit power of the antennas. Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended. This value should remain at its default setting of 2346 .
40 D-Link DIR-300 User Manual Section 3 - Conguration T o use the Universal Plug and Play (UPnP ™ ) feature tick this checkbox. UPNP provides co mpa ti bil it y with ne tw ork in g equi pm ent , sof twa re and peripherals. Unchecking the box will not allow the DIR-300 to respond to Pings.
41 D-Link DIR-300 User Manual Section 3 - Conguration T ic k thi s chec kbox to ena ble or dis able xed route s to dened destinations. Use the drop-down menu to choose the W AN or W AN (Physical Port) Interface the IP packet must use to transit out of the Router .
42 D-Link DIR-300 User Manual Section 3 - Conguration Enter a new Login Name for the Administrator account. Enter a new password for the Administrator Login Name and then retype the new password in the Conrm Password textbox. The administrator can make changes to the settings.
43 D-Link DIR-300 User Manual Section 3 - Conguration Save and Restor e Us e thi s opt io n to s av e t he cu rr en t r ou te r con g ur at io n settin gs to a le on the hard disk of the computer you are using. First, click the Save button. Y ou will then see a le dialog, where you can select a location and le name for the settings.
44 D-Link DIR-300 User Manual Section 3 - Conguration Firmwar e Update Click the Check Now button (or the link at the top of the window) to nd out if there is an updated rmware; if so, download the new rmware to your hard drive.
45 D-Link DIR-300 User Manual Section 3 - Conguration DDNS Setting T ick the Enable DDNS checkbox to enable support for DDNS. Select one of the DDNS registration organizations form those listed in the pull-down menu. A vailable servers include dlinkddns.
46 D-Link DIR-300 User Manual Section 3 - Conguration System Check VCT is an advanced feature that integrates a LAN cable tester on every Ethernet port on the router . Through the graphical user interface (GUI), VCT can be used to remotely diagnose and report cable faults such as opens, shorts, swaps, and impedance mismatch.
47 D-Link DIR-300 User Manual Section 3 - Conguration Schedules Enter a name for the new schedule rule. Choose the desired day(s), either All W eek or Select Days. If the latter is selected, please use the checkboxes directly below to specify the individual days.
48 D-Link DIR-300 User Manual Section 3 - Conguration Log Settings Click on the Save button link on this window to save the log le to your local hard drive. T ick the checkbox(es) of the typ e of log information requested: System Activity , Debug Information, Attacks, Dropped Packets, and Notice.
49 D-Link DIR-300 User Manual Section 3 - Conguration Device Info This window displays the current information for the DIR-300. It will display the LAN, W AN, and W ireless information. If your W AN connection is set up for a Dynamic IP address then a DHCP Release button and a DHCP Renew button will be displayed.
50 D-Link DIR-300 User Manual Section 3 - Conguration Log First Page: Last Page: Previous: Next: Clear: Link to Log Settings: V iew the rst page of the log. V iew the last page of the log. V iew the previous page. V iew the next page. Clear the log.
51 D-Link DIR-300 User Manual Section 3 - Conguration Statistics Active Session T he wi n d o w b el o w d i s pl a y s t h e T r a f c S ta t i st i c s . H er e yo u c a n v i e w t h e a mo u n t o f p a ck e t s t h at p as s t h r o ug h t h e D I R -3 0 0 on both the W AN and the LAN ports.
52 D-Link DIR-300 User Manual Section 3 - Conguration W ir eless The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless client.
53 D-Link DIR-300 User Manual Section 3 - Conguration Help Click the desired hyperlink to get more information about how to use the Router ..
54 D-Link DIR-300 User Manual Section 4 - Security W ir eless Security This section will show you the dif ferent levels of security you can use to protect your data from intruders.
55 D-Link DIR-300 User Manual Section 4 - Security Congur e WEP It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Y our wireless signal may degrade when enabling encryption due to the added overhead.
56 D-Link DIR-300 User Manual Section 4 - Security What is WP A? WP A, or W i-Fi Protected Access, is a W i-Fi standard that was designed to improve the security features of WEP (W ired Equivalent Privacy). The two major improvements over WEP: • Improved data encryption through the T emporal Key Integrity Protocol (TKIP).
57 D-Link DIR-300 User Manual Section 4 - Security Congur e WP A-PSK and WP A2-PSK It is recommended to enable encryption on your wireless Router before your wireless network adapters. Please establish wireless connectivity before enabling encryption.
58 D-Link DIR-300 User Manual Section 4 - Security Congur e WP A/WP A2-PSK It is recommended to enable encryption on your wireless Router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Y our wireless signal may degrade when enabling encryption due to the added overhead.
59 D-Link DIR-300 User Manual Section 4 - Security Congur e WP A, WP A2, and WP A/WP A2 (RADIUS) It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption.
60 D-Link DIR-300 User Manual Section 5 - Connecting to a W ireless Network Connect to a W ir eless Network Using W indows ® XP W indows ® XP users may use the built-in wireless utility (Zero Conguration Utility). The following instructions are for Service Pack 2 users.
61 D-Link DIR-300 User Manual Section 5 - Connecting to a W ireless Network Congur e WEP It is recommended to enable WEP on your wireless router or access point before conguring your wireless adapter . If you are joining an existing network, you will need to know the WEP key being used.
62 D-Link DIR-300 User Manual Section 5 - Connecting to a W ireless Network 3. The Wir eless Network Connection box will appear . Enter the same WEP key that is on your router and click Connect . It may take 20- 30 sec ond s to con nec t to the wire le ss netw or k.
63 D-Link DIR-300 User Manual Section 5 - Connecting to a W ireless Network Congur e WP A-PSK It is recommended to enable WEP on your wireless router or access point before conguring your wireless adapter . If you are joining an existing network, you will need to know the WEP key being used.
64 D-Link DIR-300 User Manual Section 5 - Connecting to a W ireless Network 3. The Wir eless Network Connection box will appear . Enter the WP A-PSK passphrase and click Connect . It may take 20- 30 sec ond s to con nec t to the wire le ss netw or k. If the con ne cti on fails, please verify that the WP A-PSK settings are correct.
65 D-Link DIR-300 User Manual Section 6 - Setting Up W i-Fi Protection (WCN 2.0 in W indows V ista) Setting Up W i-Fi Pr otection (WCN 2.0 in W indows V ista) The DIR-300 supports W i-Fi protection, referred to as WCN 2.
66 D-Link DIR-300 User Manual Section 6 - Setting Up W i-Fi Protection (WCN 2.0 in W indows V ista) Setting Up a Congur ed Router Once the Router has been congured, you can use the push button on the Router or third party software to invite a newcomer to join your W i-Fi protec ted network.
67 D-Link DIR-300 User Manual Section 7 - Changing the Computer Name and Joining a W orkgroup Changing the Computer Name and Joining a W orkgr oup The following are step-by-step directions to change the computer name and join a workgroup. 2. Click on the Advanced system settings link.
68 D-Link DIR-300 User Manual Section 7 - Changing the Computer Name and Joining a W orkgroup 3. Click the Computer Name tab in the System Properties window and ente r a descri ption of your compute r in the textbo x. When you are nishe d, click the Change button.
69 D-Link DIR-300 User Manual Section 8 - Conguring the IP Address in V ista Conguring the IP Addr ess in V ista The following are step-by-step directions to congure the IP address in W indows V ista. 2. Go t o th e Ne tw or k a nd Int er ne t wi nd ow an d cl ic k t he app ro pr ia te Local Area Connection icon.
70 D-Link DIR-300 User Manual Section 8 - Conguring the IP Address in V ista 4. T ick the Internet Protocol V ersion 4 (TC P/IPv4) checkbox in the Networking tab in the Local Area Connection Pr operties window .
71 D-Link DIR-300 User Manual Section 8 - Conguring the IP Address in V ista 6. Right-click the Local Area Connection icon and then select Status from the drop-down menu. 7. Go to the Local Ar ea Connection Status window and click the Details button.
72 D-Link DIR-300 User Manual Section 9 - Setting Up a Connection W irelessly Setting Up a Connection or Network W ir elessly The following are step-by-step directions to set up a wireless connection.
73 D-Link DIR-300 User Manual Section 9 - Setting Up a Connection W irelessly 3. Click the Next button on the Set up a wir eless r outer or access point window . 4. The following window displays the system progress. 5. This window conrms that you want to create wireless network settings that are savable to a USB ash drive.
74 D-Link DIR-300 User Manual Section 9 - Setting Up a Connection W irelessly 6. Enter a network name on the Give your network a name window in the Set up a wir eless router or access point wizard.
75 D-Link DIR-300 User Manual Section 9 - Setting Up a Connection W irelessly 9. O n c e y o u ha v e se l e c te d th e d es i r e d s e c u ri t y me t h o d o n th e Choose advanced network security options window in the Set up a wireless r outer or access point wizard, click the Next button.
76 D-Link DIR-300 User Manual Section 9 - Setting Up a Connection W irelessly 12 . On ce you have sa ved your netw ork se tti ngs to USB, the Cop yi ng set tin gs to th e USB dr ive wi ndo w in the Se t up a wir el ess ro ute r or access point wizard opens to indicate the system progress.
77 D-Link DIR-300 User Manual Section 10 - Connecting to a Secured W ireless Network (WEP , WP A-PSK & WP A2- Connecting to a Secur ed W ir eless Network (WEP , WP A-PSK & WP A2-PSK) The following are step-by-step directions to set up a wireless connection.
78 D-Link DIR-300 User Manual Section 10 - Connecting to a Secured W ireless Network (WEP , WP A-PSK & WP A2- 4. Select a network to connect to in the Select a network to connect to window in the Connect to a network wizard and then click the Connect button.
79 D-Link DIR-300 User Manual Section 10 - Connecting to a Secured W ireless Network (WEP , WP A-PSK & WP A2- 7. The following Successfully connected to dlink300 w in do w i n t h e Connect to a network wizard is displayed. Choose to save to the network and /or sta rt the new co nnec tion au toma tica lly .
80 D-Link DIR-300 User Manual Section 10 - Connecting to a Secured W ireless Network (WEP , WP A-PSK & WP A2- 10. T o test the new IP address, use the Ping feature of the command prompt. 9. Conrm your new settings by calling up the command prompt and then entering the ipcong command.
81 D-Link DIR-300 User Manual Section 1 1 - Connecting to an Unsecured W ireless Network Connecting to an Unsecur ed W ir eless Network The following are step-by-step directions to set up an unsecured wireless connection. 2. Go to the Network and Sharing Center window and click the Manage Network Connections link.
82 D-Link DIR-300 User Manual Section 1 1 - Connecting to an Unsecured W ireless Network 3. Right-click the Wirele ss N et wo rk C on ne cti on e nt ry a nd t he n sel ec t Connect/Disconnect from the drop-down menu.
83 D-Link DIR-300 User Manual Section 1 1 - Connecting to an Unsecured W ireless Network 6. The following Connect to a network wizard window displays the system progress. 7. The foll ow in g Suc ce ss ful ly con nec te d to d lin k3 00 wi nd ow in the Co nn ect to a network wizard is displayed.
84 D-Link DIR-300 User Manual Section 1 1 - Connecting to an Unsecured W ireless Network 9. Conrm your new settings by calling up the command prompt and then entering the ipcong command. 10. T o te st the n ew IP ad dr ess , use th e P ing f eat ure o f t he com man d prompt.
85 D-Link DIR-300 User Manual Section 12 - T roubleshooting T r oubleshooting This chapter provid es solutions to problem s that can occur during the installation and operation of the DIR-300. Read the following descriptions if you are having problems.
86 D-Link DIR-300 User Manual Section 12 - T roubleshooting • Congure your Internet settings: • Go to Start > Settings > Contr ol Panel . Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults.
87 D-Link DIR-300 User Manual Section 12 - T roubleshooting 3. Why can’t I connect to certain sites or send and r eceive emails when connecting thr ough my router? If you are having a problem sending or receiving email, or connecting to secure sites such as eBay , banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex.
88 D-Link DIR-300 User Manual Section 12 - T roubleshooting Y ou should start at 1472 and work your way down by 10 each time. Once you get a reply , go up by 2 until you get a fragmented packet. T ake that value and add 28 to the value to account for the various TCP/IP headers.
89 D-Link DIR-300 User Manual Appendix A - W ireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks.
90 D-Link DIR-300 User Manual Appendix A - W ireless Basics What is Wir eless? W ireless or W i-Fi technology is another way of connecting your computer to the network without using wires. W i-Fi uses radio frequency to connect wirelessly , so you have the freedom to connect computers anywhere in your home or ofce network.
91 D-Link DIR-300 User Manual Appendix A - W ireless Basics Bluetooth is the industry standard wireless technology used for WP AN. Bluetooth devices in WP AN operate in a range up to 30 feet away .
92 D-Link DIR-300 User Manual Appendix A - W ireless Basics Wher e is wireless used? W ireless technology is expanding everywhere not just at home or ofce. People like the freedom of mobility and it’ s becoming so popular that more and more public facilities now provide wireless access to attract people.
93 D-Link DIR-300 User Manual Appendix A - W ireless Basics Don’ t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WP A or WEP security feature on the router . Refer to product manual for detail information on how to set it up.
94 D-Link DIR-300 User Manual Appendix B - Networking Basics Networking Basics Check your IP addr ess After you install your new D-Link adapter , by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically .
95 D-Link DIR-300 User Manual Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router , or you need to assign a static IP address, please follow the steps below: Step 1 W indows ® XP - Click on Start > Control Panel > Network Connections .
96 D-Link DIR-300 User Manual Appendix C - T echnical Specications T echnical Specications Standards • IEEE 802.1 1g • IEEE 802.1 1b • IEEE 802.3 • IEEE 802.3u Wir eless Signal Rates* • 54Mbps • 48Mbps • 36Mbps • 24Mbps • 18Mbps • 12Mbps • 1 1Mbps • 9Mbps • 6Mbps • 5.
97 D-Link DIR-300 User Manual Appendix C - T echnical Specications Advanced Firewall Featur es • NA T with VPN Pass-through (Network Address T ranslation) • MAC Filtering • IP Filtering • U.
98 D-Link DIR-300 User Manual Appendix D - Contacting T echnical Support Contacting T echnical Support D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product.
99 D-Link DIR-300 User Manual Appendix E - W arranty W arranty Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited W arranty: • Only to th.
100 D-Link DIR-300 User Manual Appendix E - W arranty Limited Softwar e W arranty: D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’ s t.
101 D-Link DIR-300 User Manual Appendix E - W arranty not include any manuals or accessories in the shipping package. DLink will only replace the defective portion of the product and will not ship back any accessories. • The customer is responsible for all in-bound shipping charges to D-Link.
102 D-Link DIR-300 User Manual Appendix E - W arranty SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT . Limitation of Liability: T O THE MAXIM UM EXTEN T PERMITTE D BY LA.
103 D-Link DIR-300 User Manual Appendix E - W arranty FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
104 D-Link DIR-300 User Manual Appendix F - Registration V ersion 1.0 4/23/2007 Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté D-Link version 1.0 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du D-Link version 1.0 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation D-Link version 1.0, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le D-Link version 1.0 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le D-Link version 1.0, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du D-Link version 1.0.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le D-Link version 1.0. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei D-Link version 1.0 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
